Exchange infrastructure & Integration broker

Hi Experts
Does the terms Exchange Infracture and Integration broker means the same. If not wat is the difference between them.
Regards
Saravana

Hi Saravana,
Integration Broker is an SAP NetWeaver capability (that is, the features for a technological area of SAP NetWeaver) that is supported by SAP NetWeaver Exchange infrastructure (XI).
SAP XI is an Middleware Integration Tool ( Integration Broker )
http://help.sap.com/saphelp_nw70/helpdata/en/43/71375eb5263457e10000000a422035/frameset.htm
Chk out in the Process Integration layer of the Netweaver Stack-layer.
http://help.sap.com/saphelp_nw70/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Hope this was helpful.....
kanan

Similar Messages

XI Certification as Technology Consultant -Exchange Infrastructure & Integr

All,
I have been trying to get some informaion to get certified on "Technology Consultant - Exchange Infrastructure & Integration"
I know the exam code is C_TBIT51_04. I need to know what study material I have to go thru.
Thanks a lot in advance.
Kumar.

Hi,
If you have service market place id, and you registered for the partciluar course,you can get this info from service.sap.com/nw04-kt
Following link tells about entire XI documentation etc.
certi. exams on XI
Re: Regarding XI installation and Learning
TBIT40-45 Materials/PDF's at SAP sites
Pls acknowledge the same.
Regards,
Moorthy

Diff b/w netweaver platform and exchange infrastructure.

Dear SDNers,
I am new to net weaver.first of all what is the diff b/w netweaver platform and exchange infrastructure.
i want to learn more about net weaver.if anybody give me the links, i would be grateful to them.
reward sure...
Senthil kumar

Hi
N/W is a set of new dimensional products that SAP uses for Integration of different Business entities like the "People" , "Information" and "Process"
XI is part of the Process Integration layer.
Regards
krishna

Technical system in SLD for Exchange Infrastructure prod entry deleted

Hello,
Technical system in SLD for Exchange Infracture does not have any entries.
Integration server entry is also not existing.
adapter engine,domain,integration server,integration directory,integration repository,rwb do not exists.
My main concern is there is no entry for Integration Server - how can I get back this entry . I restarted J2EE engine from NWA but still I am not able to see Integration server entry under Exchange Infrastructure technical system.
I also did RZ70 but no use.
Please suggest.

Hi
One of the steps, when applying note #764176, is to delete all 6 of these entries in the SLD. So deleting the entries is not a big problem. These entries should be automatically created when you have successfully completed all the steps in note #764176. So, I'd recommend to apply all steps in this note.
Also, ensure the system is consistently patched i.e. ABAP, Java and XI components must be on the same SP level. An inconsistently patched system is another possible cause of this error.
What happens when you run the SLDCHECK transaction? Do you see errors here?
Regards
Mark

SLD - Technical System Type Exchange Infrastructure

Hi experts,
does anybody know how these Entries in the SLD appear?
Technical System Type: Exchange Infrastructure
Adapter Engine
Adapter Framework
Domain
Integration Directory
Integration Repository
Integration Server
RWB
Runtime Management Server
are they generated automatically? at which time? whats the trigger for them to appear?
Or are they inserted manually?
Thanks!
Chris

hi,
>>are they generated automatically? at which time? whats the trigger for them to appear?
Or are they inserted manually?
automatilly
RZ70 in SAP ABAP
and from visual admin - SLD bridge
Regards,
Michal Krawczyk

PI7.0: SLD - Technical System of type "Exchange Infrastructure"

Hi Guys,
The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps
1. Switch to "Home" in the "Technical Landscape" view, and select the
"Exchange Infrastructure" technical system type there. Select all
domains and XI components for the host and delete these by selecting
them and pressing 'Remove'.
2. Restart the J2EE server. After you restart the server, the XI
components log on to the SLD again and create a new entity of class
"XI Integration Server".
3. To register the directory and repository again, you must also log on
to the two tools.
I have restarted the j2ee server and looged into the IR and ID but they are not automatically registered in the central sld.
central sld is on solmanger box. How to register IR, ID, RWB and central adapter engine under the technical systems of type exchange infrastructure ?
any help would be really appreciated
Thanks,
Raj

Hi Reddy,
i faced the same problem few days back...
check this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
and also cross-check the post installation steps.
In my case the Business system for XI was created of type web as java... but it should be of type web as abap.
Sachin

If technical system type is Exchange Infrastructure.

Hi,
In sld,when my technical system type is Exchange Infrastructure,there are 3 elements:adapter engine ,domain and integration server.But i know the right result is 6 elements,so other 3 elements are:integration repositary ,integration directory and rwb.Can you tell me how to add them?
Thanks in advance.
Best regards!

Hi xinjiang.
Apply note 764176, it may help you. It helps you to get all the components self-registered in the SLD.
https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=764176&nlang=EN&smpsrv=https%3a%2f%2fwebsmp203%2esap-ag%2ede
Regards,
Gari.

SAP Exchange Infrastructure

Can any one tell me about SAP Exchange Infrastructure, what is it, where it is reqd., what r the requirements to install it, or any source of material to read
abhishek

Hi Abhishek,
As u got .....the basic information. check these links for further info.
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
Also for more info related to XI go through these links:
XI -Starter
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
To understand the architecture of XI, Please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
1) How-to Guides for SAP NetWeaver 2004 for SAP XI:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
Regards,
Priyanka.

How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox

Hello,
We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
Please let me know if you have any information or resources you can direct me toward.
Thanks,
Chris

Hi,
To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Please note that there may be 9646 error if there are many simultaneous connections at the same time.
Thanks,
Angela Shi
TechNet Community Support

How to Send a .txt file through FTPTARGET connector of Integration Broker

Hi,
Is it possible to send a .txt file(infact anyfile other than xml format) to a host server using FTP Target connector of Integration Broker. If so can someone explain the steps to achieve it.
Regards,
Uday

Yes, you can do that. I've done exactly that couple years ago.
If I remember currently, below is a high level of how I did it.
Read the file you want to send into the buffer using GetString function like:
+/*A single string containing the entire contents of the file including line terminator.+
+ After this method completes successfully, the temp file is deleted.*/+
+&FileData = &FiletoRead.GetString();+
The function deletes the file so I had to create a temp copy of what i want to send and read that copy instead of the original file. Also, IB will have issues if you are trying to send an empty file. so i did a basic check, if the file is empty then put something in it.
rem -- IB message will fail if we are trying to send an empty file;
If None(&FileData) Or
+&FileData = "" Or+
+&FileData = " " Then+
MessageBox(0, "", 0, 0, ("File " | &sTargetFileName | " is empty."));
+&FileData = "No Data Found!";+
End-If;
Next, you need to load the file data that are now in &FileData to IB:
+&MSG = CreateMessage(@&sServiceOperation);+
+/* Generate the XML doc. */+
+&dFtp = CreateXmlDoc("");+
rem -- &bReturn = &dFtp.LoadIBContent("Some text inside of a file to send through IB!");
+&bReturn = &dFtp.LoadIBContent(&FileData);+
Then put XML into the message and publish it:
+/*put the XML in the message*/+
+&MSG.SetXmlDoc(&dFtp);+
+%IntBroker.Publish(&MSG);+
You might need to load some IBConnectorInfo and override them using your PC. I had to do that to get the password for the FTP transmission encrypted:
/* Encrypt the password */
&pscipher = CreateJavaObject("com.peoplesoft.pt.integrationgateway.common.EncryptPassword");
&encPassword = &pscipher.encryptPassword(&sPassword);
&pscipher = Null;
Good luck and hope this helps.

PeopleSoft Integration Broker from FSCM9 [PT8.48] to CRM9 [PT8.49]

Dear Team,
We are trying to integrate between Finance 9 with PT 8.48 to CRM9 with PT 8.49 using Integration Broker. We followed the following steps
1. Configured the "LOCAL" Gateway which was successfully pinging in both the instances finance9 and crm9 and the domain status is active in both the
instances. We are using "PSFTTARGET co"nnector
2. Configured the default local node PSFT_EP in FSCM9 and PSFT_CR in CRM9 instances and successfully pinging the node.
3. For remote node, we are using PSFT_CR node in FSCM9 portal and PSFT_EP in CRM9 portal which are failing to ping.
4. Defined custom Message,custom queue, custom Services, custom Service operations, custom routing in FSCM9 portal.
5. We defined custom fields, custom records, custom pages, custom components, custom menu and successfully registed with the portal with Public access
in FSCM9 portal.
6. Now we are trying to add new values or add new record in the newly customized page in FSCM9 and trying to get the same record values in CRM9 database
using Integration broker with above integration configuration.
Can you please help with appropriate screenshots for the integrations between FSCM9 and CRM9
Require Screenshots for
1. How to configure the remote nodes.
2. How to configure Routings
3. How to configure Queue
4. How to assign custom message into custom message channel
5. What to configure in the PSAAPSRV.cfg and PSAAPSRV.ubx ?
6. What are the configurations required in "Main Menu > PeopleTools >Integration Broker > Configuration > Service configuration"

Hi,
Pls ensure you have the following in place...
1. All nodes being used for Integration should be defined on the Single Sign On Page in both the env's.
2. The passwords on all the 4 nodes should be same.
3. The external Alias of the Sv Ops in question should be identical.
4. Ensure that the User ID's initiating the request should be defined in the Target env along with access to that Sv Op and have the PeopleSoft User role.
What is the error message you are getting when you try pinging the nodes?
Also, the Sv Ops should be granted access preferably to the PL that the Role PeopleSoft User uses (PTPT1000). In case you have custom security in place then kindly refer to your security matrix to identify the correct PL...
Would also like to point out that in most of the Async Integrations its advisable to use existing queues, unless you have very specific purpose to use your custom queue.
Thanks!
Prashant

What is a container variable in BPM (Exchange Infrastructure)?

In BPM scenario with Exchange Infrastructure, I have come across container variable. What is this container variable? How it is used in BPM?
In another instance I read that to trigger a alert in BPM I have to create a container variable. So I have another question, What steps I have to follow to create a container variable and trigger alert?

Hi,
To create alerts in XI , check this blog,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
ALso, if you are on SP14 and above, check this note 913858.
The container variables that are accepted while createing Alerts in XI are available on this link,
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards,
Bhavesh

Vendors in Integration Broker

Peopletools 8.49.05
HCM 9.0 and Fins 9.0
In Integration Broker, we have a service operation vendor_sync set up between fins and hcm. All Vendor transactions are showing up as moving successully from fins to hcm. All vendors, however, are not required to go to HCM and they are not showing up in the HCM database (which is fine) -- but -- my question is : Why do all vendors have to go through IB if only those for HCM are required?
Edited by: chiqid on Oct 29, 2009 6:19 AM
Edited by: chiqid on Oct 29, 2009 8:12 AM

Hi Jim,
If I capture the output generated by the third party system, transform it locally using the xsl the resulting xml is in fact well formed. Also as long as the description does not contain any special characters the result of the transformed message from the third party system is successfully processed by PS. This leads me to believe it is a direct a result of the special characters and not the format of the message after being transformed. Given that we are using Oracle's SOA Suite I am also able to capture the payload after it is transformed and prior to being routed to PS and this confirms the local test as well. The '&' is properly escaped and should be handled not as a special character but as simple character data.
The structured vs. unstructured is an interesting idea. Hadn't thought of it but will let you and the community how it goes if I go that route.
I may take your advice and go home for the weekend :)
Thanks for the insight.
Ryan

Integration Broker Application Messages Issue

Hi Gurus,
We are having an issue with the Integration Broker Application Messages.
Here's the issue, when we run Dynrole it process Application Messages. All messages go to Done status, but checking the instance, the Footer comes first, where the header should comes first. This issue happens from time to time, we only run 8 application messages at a time (header and footer included). BTW, failover is enabled on our server.
We are trying to find a solution on this, please help us.
Thanks,
Red

Hi,
Did it resolved? If yes, please share here if possible.
Cheers,
Elvis.

Issue synchronizing with Integration Broker

I need some guidance in troubleshooting XenApp integration with VMware Workspace 2.1. It seems like I have successfully installed and configured the Integration broker.
I followed the steps from the installation guide.
Verify PowerShell remoting.
This sample command string applies to Citrix Server Farm 6.5.
Get-XAApplication -ComputerName CITRIX SERVER NAME
-> Works!
Type http://hostname /IB/API/RestServiceImpl.svc/ibhealthcheck to verify that the Integration Broker Web application is running.
The expected output displays.
All ok
Type https://hostname /IB/API/RestServiceImpl.svc/ibhealthcheck to verify that the Integration Broker Web application is running.
The expected output displays.
All ok
_> Works!
But then I added the Integration broker to the workspace portal and when I press "Sync Now" I get the message:
Calculating sync actions.
This takes a long time. When I look at the troubleshooting tab I see the following error:
Failed Sync Action: Could not pull objects from Integration Broker.
I use a self signed certificate on the Integration Broker. Any tips on how to troubleshoot, what to check?
I'm using Windows 2012R2 with IIS 8.5. I'm not sure if that is supported.

The IB healthcheck results seem ok indicating that the IB has been installed properly.
We need to check if the IB is able to communicate with the XenFarm server properly and able to fetch the resources and entitlements.
Please refer to the Workspace Documentation - Setting Up Resources in VMware Workspace Portal > Troubleshooting Workspace Resource Configuration ->
Citrix-Published Resources Are Not Available in Workspace.
Please follow instructions here to check if the IB is able to contact the xen farm server. Please send us the IB and connector logs when the failure happens.

Exchange infrastructure & Integration broker

Similar Messages

Maybe you are looking for