Exchange issue: send/receive mail fine - can't delete or move messages

Just installed Snow Leopard this morning - excited to finally be able to hook into my company's exchange server. Everything appears to be functioning fine (I can receive and see all messages in my inbox, I can send email fine) however when I try either delete a message or move a message to another folder I receive the following message:
"The message "XXXXXXX" could not be moved to the mailbox "Trash - [email protected]"
An error occurred while moving messages to mailbox "Trash - [email protected]""
Any ideas? Thanks in advance for any advice/help!
EDIT: I am not currently aware of what exchange version my company is using.
Message was edited by: Tyrun

I'll third the post. Identical problem, but I'm one of the Exchange 2007 e-mail administrators, so people ask me for answers. The autodiscover worked, so I know the settings are correct. Mail, iCal and Address Book all had no problem with the sync. I am also not being blocked by the firewall.
I'll start tweaking settings and see if I can make any progress. Just to reiterate what was stated by Tyrun, I can receive and send messages, but I can't move or delete (send to Trash) any messages. I'm running Snow Leopard, which was upgraded from an out-of-the-box fresh install of Leopard on a brand new MBP. All Software Updates have been applied.

Similar Messages

  • Can't delete or move messages unless I quit and restart

    Beginning yesterday I was unable to delete or move any messages in any of my 4 accounts. If I closed Tbird than restarted it I could delete and move messages in all accounts for 10 or 15 minutes. Thereafter delete again mysteriously failed to work. It worked again for about 10-15 minutes after closing and restarting. Rebooting the system and running a thorough virus scan did not fix the problem.
    Latest version of Thunderbird. Win 7, several email accounts both imap and POP. Problem applies over all accounts both imap and POP. Problem is NOT a corrupted trash folder. Others have reported this problem and no one, as yet, has posted a fix.
    The problem is clearly not in the user settings nor a corrupted folder because if it were it would fail all the time. The key is the fact that it works until some time factor disables Delete. Delete is disabled whether TBird is in use during the 15 minutes or not in use during that time.

    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages

  • I just updated to 10.9.2. Now I can't get mail on yahoo or gmail and I can't delete or move messages

    Any help to get my mail and be able to use it through iMail would be appreciated

    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages

  • Receiving mail fine, but can't send mail

    For some reason, my outgoing mail servers are all showing offline. I can receive mail fine. I have my own domain names, and they are all housed on the same host. My boss has one of the same domains and he can send and receive mail fine. I can receive mail, but can't send mail out unless I use my gmail server to send. All my other domains are showing offline on the outgoing. How do I get them back online, and is this a Macmail problem (my boss uses Entourage), or is it a problem with my Qwest DSL? I don't know where to start.
    I did call the place where our domains are hosted and all is OK there.
    Thanks,
    Carole

    Problem - Cannot send eMail - pop up box says smtp server needs password - if password used this is not recognised.
    Solution - Go to Mail>preferences choose Accounts, select one of the accounts.
    Look at 'outgoing mail' server, shows ' smtp.(name of server.com) (offline)' then click on it and choose 'edit smtp server list' - the box will show description - '(name of server)', server name - 'smtpmail.(server name.com)' and in use by account - '(account name)'
    press the '-' button and the above details will disappear.
    Press '+' button and type in 'smtpmail.(server name).com' in the server name box - if you are prompted to save changes, click 'OK' - this may only happen when changing the first account ..
    All should now be OK and you can now check if eMail can be sent..
    Open an 'unsent eMail' in the Outbox by double clicking on it and clicking 'send' it should be sent.
    Wilbertross

  • How do I set up my 3G to send/receive mail from MS exchange?

    How do I set up my 3G to send/receive mail from MS exchange?

    Welcome to the Apple Community.
    If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
    1. Configuring Mail in Snow Leopard
    2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

    Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
    Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
    Thanks
    Richard

    It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
    I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
    And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
    I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
    Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

  • TS3899 maybe you can help....I can receive mail fine, but when I open or delete from my iphone or computer, it will not sync....so I have 600 emails on my iphone and 100 on my computer..I have looked at everything I can think of

    maybe you can help....I can receive mail fine, but when I open or delete emails from my iphone or computer, it will not sync with each other....so I have 600 emails on my iphone and 100 on my computer..I have looked at everything I can think of

    I don't know about the systems, but is your phone on wireless and your other device on wireless?  Then I think they would mutually update.
    Howerver the previous response from ckuan sounds much more informed so I would check that out.

  • Cannot RECEIVE mail - But can send :(

    Can anyone point out what I'm doing wrong here? I'm switching from MS Entourage to the new version of Mail. I've copied all the settings across from Entourage (which is still sending & receiving mail after the upgrade from 10.4.10 to 10.5) The connection Doctor is saying that everything is connected etc I've even set up a mail account to my home email, which i can send & receive from...
    Account type is POP, email entered, password entered, incoming & outgoing mail servers entered, there is no error messages coming up. I create a message in Mail, addressed to myself - nothing happens... ten mins later I fire up Entourage, and receive the message I sent from Mail!?

    Call your mail service provider. Have them tackle it.

  • HT1277 i did try all that and I still can't seem to send e-mail I can receive it though

    I tried to send e-mail and can't seem to tried all suggestions used my ISP for quite a while went through all the suggested steps several times I can receive e-mail but cannot send it forward it am asking if there is any other things to try 

    Your SMTP server host name setting, your SMTP server port setting, whether SSL/TLS is needed or not, amd/or your server login username or password credentais, some combination of these, are likely incorrect here.  
    These are the typical triggers, when a send (or a forward) fails.
    If you have more than one mail account configured within Mail.app, ensure that the mail account you are testing with is configured with the expected SMTP server, and is not referencing the SMTP server for another account.
    Connection Doctor (available in the Mail.app menu bar Window menu) can sometimes help figure out some of these connection problems, too.

  • Cant send e mail but can receive hotmail

    cant send e mail but can receive email on ipad2 from hotmail....problem with ourgoing???

    Dear All,
    Thought that I'd report in.  My firewall is not on, so that can't be the problem.
    I went into my mail settings and re-entered passwords, account info, unselected SSL, then selected it again, entered custom ports, etc., etc., and was able to get mail to send, but no information seems to be stored and there doesn't seem to be any way to save any changes that are made.  There was always a box that came up and asked if you wanted to save changes, but I can't find it now.  If you shut mail down and start it up again, the same old problem occurs.
    I also have two smtp servers and it seems that if one is working, the other doesn't. If outbound.att.net is working and shows green, then smtp.att.yahoo.com is red.  If smtp.att.yahoo.com is green, then outbound.att.net is red.  Occasionally they will both be green, but neither one sends any mail.  Strange!
    Also, Connection Doctor shows a red light for no connection when my mail just swooshed out of the mailbox!  It really is working, but Connection Doctor doesn't show a connection.  And, when the light is green and a connection is made, the mail still doesn't leave the box.
    It still takes a long time to send anything, but I was able to send about five test messages tonight.  I'm still waiting for a fix from Apple.
    Barbara

  • I cannot receive mail , but can send it , any ideas ?

    This is what appeared on my .mac account .
    I am unable to receive mail .
    Can anyone provide any details ?

    If this is your iCloud email account, sometimes removing and adding it back will fix things.  To do this, go to System Preferences>iCloud, uncheck Mail, restart your Mac, then go back and check Mail again.  You may need to open Mail and go to Mail>Preferences>Accounts, select your iCloud account, select the Account Information tab, then be sure your .mac address is selected in the Alias drop-down list.

  • Issue sending e-mails to certain domain

    I'm having an issue sending e-mails to domain capitaliii.com from my Ironport.  I see the following message in the Ironport log.
    "DNS Temporary Failure capitaliii.com MX - unable to reach nameserver on any valid IP"
    When I issue a nslookup on the MX record from the Ironport, I get the below message.
    Temporary query error:  "unable to reach nameserver on any valid IP" looking up A record for "capitaliii.com" to nameserver
    ns3.digipark.com
    I can however do a successful a successful nslookup from my workstation.  See the results below.  Any ideas?  I've done
    a flushdns on the Ironport to no avail.
    Non-authoritative answer:capitaliii.com  MX preference = 10, mail exchanger = mail1.digipark.commail1.digipark.com      internet address = 64.111.26.141

    Hello Doug,
    check if your firewall in front of the IronPort appliance allows TCP for DNS on port 53.  The query results I get are close to the 512 byte limit, where DNS switches from UDP to TCP:
    cisco$  dig mx capitaliii.com +trace
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> mx capitaliii.com +trace
    ;; global options: +cmd
    .                       274955  IN      NS      f.root-servers.net.
    .                       274955  IN      NS      g.root-servers.net.
    .                       274955  IN      NS      h.root-servers.net.
    .                       274955  IN      NS      i.root-servers.net.
    .                       274955  IN      NS      j.root-servers.net.
    .                       274955  IN      NS      k.root-servers.net.
    .                       274955  IN      NS      l.root-servers.net.
    .                       274955  IN      NS      m.root-servers.net.
    .                       274955  IN      NS      a.root-servers.net.
    .                       274955  IN      NS      b.root-servers.net.
    .                       274955  IN      NS      c.root-servers.net.
    .                       274955  IN      NS      d.root-servers.net.
    .                       274955  IN      NS      e.root-servers.net.
    ;; Received 260 bytes from xxx.xxx.xxx.xxx in 189 ms
    com.                    172800  IN      NS      a.gtld-servers.net.
    com.                    172800  IN      NS      b.gtld-servers.net.
    com.                    172800  IN      NS      c.gtld-servers.net.
    com.                    172800  IN      NS      d.gtld-servers.net.
    com.                    172800  IN      NS      e.gtld-servers.net.
    com.                    172800  IN      NS      f.gtld-servers.net.
    com.                    172800  IN      NS      g.gtld-servers.net.
    com.                    172800  IN      NS      h.gtld-servers.net.
    com.                    172800  IN      NS      i.gtld-servers.net.
    com.                    172800  IN      NS      j.gtld-servers.net.
    com.                    172800  IN      NS      k.gtld-servers.net.
    com.                    172800  IN      NS      l.gtld-servers.net.
    com.                    172800  IN      NS      m.gtld-servers.net.
    ;; Received 504 bytes from 198.41.0.4#53(a.root-servers.net) in 23 ms
    capitaliii.com.         172800  IN      NS      ns4.digipark.com.
    capitaliii.com.         172800  IN      NS      ns3.digipark.com.
    ;; Received 109 bytes from 192.55.83.30#53(m.gtld-servers.net) in 50 ms
    capitaliii.com.         86400   IN      MX      10 mail1.digipark.com.
    capitaliii.com.         86400   IN      NS      ns3.digipark.com.
    capitaliii.com.         86400   IN      NS      ns4.digipark.com.
    ;; Received 147 bytes from 64.111.26.135#53(ns4.digipark.com) in 148 ms
    Hope that helps,
    Andreas

  • HT5225 unable to send receive mail using Mail 2.1.3

    Ever since iCloud took over, I am no longer able to send/receive mail using Mail 2.1.3 on my 10.4.11 version.  I didn't think it would affect it.  Someone please help as to how I can rectify the issue!

    Hi,
    Please review the following note:
    Note: 371830.1 - Notification Mailer Does Not Start, Remains In Status Starting
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371830.1
    If the above does not help, I suggest you run "Workflow Diagnostics" test and see if it returns any error/warning messages.
    Note: 274764.1 - Oracle Workflow Cartridge Workflow Java Mailer Setup Test
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274764.1
    Note: 378281.1 - How Does One Verify The Notification Mailer Is Functioning Properly?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=378281.1
    Regards,
    Hussein

  • My iphone 5 for some reason can receive calls, send & receive texts but can not call out

    My iphone 5 for some reason can receive calls, send & receive texts but can not call out

    I am not sure if this issue is going to help you but lets give it a try.
    I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
    As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using.

  • How to configured different AD sites mailbox user able to send & receive mail to each other?

    I have 2 system in one system i configured DC=Yahoo.com + Xchange07 & on 2nd sytem i configured DC=Google.com + Xchange 07 successfully configured (in VMware)
    I already made entry of Both DC's DNS entry of New Host record & NewMail Exchanger (MX)
    both DC ping each other with DC name i.e. yahoo.com DC ping to google.com & vice-versa.
    Same AD site mailbox user able to send & receive mail but google.com mailbox user can't send & receive mail from yahoo.com as vice-versa.

    Hi,
    I recommend you check if you can telnet the other CAS/HT server on port 25 from each side.
    If it connects, is there any error message or NDR when sending or receiving email from each other?
    If it fails, please check if port 25 is open. If you have a firewall enabled, please make sure that port 25 is open. Besides, please check whether the DNS records have been configured correctly.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

Maybe you are looking for

  • Bug after updating Adobe Air to Adobe Air 2.6.0.19140

    I have an application developped in last version of Adobe Flex Builder (Flex 3 Pro) which worked very well. But when I have updated to the last version of Adobe Air (2.6.0.19140), the method maximize() on a window now not works. The window is small i

  • Sync/Async communication with JMS Receiver

    Hi all, I am working on one Sync/Async model without BPM. Sender is  RFC which is expecting some response, but we know receiver jms doesnt support response message directly. For this i used modules provided by SAP. While developing interface i used b

  • CP5 - import function is always greyed out

    Hi all, the function that lets you import frames and captions from other projects (in the "File" menu) is always greyed out. I can open parallel projects and do a copy & paste, but I never had problems using this feature in previous releases. Maybe I

  • How to create a full width tab panel ?

    Hi, I can't make my tab panel as width as the screen, even when I fix it at each border of the composition, is it possible ? Do you know what should I do ? Many Thanks

  • Call Library Function with C structure

    I have been given a MS C++ DLL that I need to call from LabVIEW. The input (and output) to the DLL are pointers to "C" data structures. The LabVIEW "Call Library Function" VI allows you to add input parameters and define their type (I.e. Numeric, Arr