Exchange logic files with cubase and vice versa?

is it possible?
thx
pieter

Eriksimon wrote:
Both can export MIDI as SMF (Standard Midi File) and import it.
PCM (= wav, aiff, sdII) Audio files made by either can be imported by either.
You cannot open project files from either in either.
For details on Logics' side, see chapter 29 (p. 625) of the LP 8 User Manual.
regards, Erik.
ps, I hope Pancenter can chime in. He uses both.
Two possible suggestions.
Cubase (full version) can export OMF files that Logic can read as long as there aren't too many regions. This will let you import audio in one step then import the MIDI file into the same project.
The other method for dealing with audio is to use Broadcast WAV files on both platforms as they are time stamped and will import to the correct position.
That and standard MIDI files are about the best you can do.
pancenter-

Similar Messages

Some futures in bpel which are not possible with ESB and vice versa

Can anyone please tell me some futures in bpel which are not possible with ESB and For some features available in ESB that are absence in BPEL?

I think you've mistaken the meaning of both technologies. ESB actually works as a part of BPEL, for instance you can create partner link from any esb service.
ESB service can only expose data or retrieve and process (transform) them from another service. BPEL is using services like ESB as a source and adds decision making functionality which is not present in ESB.

Calling HTML file from servlet and vice versa...

i have got few questions..
1- if a site is made in HTML then what should be used to put user login functionality in it, servlets or jsp or other option(specify)?
2- im trying to do with servlets, so when im calling doPost method from HTML page and sending data, everything working fine but because of this the page refreshes and the HTML coding get lost, so how can i stop that from happening if possible, like showing the same page with messege = "Logged in".
3- how can i call an HTML page from servlet?
4- how can i send data from servlet to HTML page?

that i m aware of, but when a servlet is called then the page will refresh n it will display the things that you have mentioned in the servlet file n not the things that u have mentioned in HTML file, n the page will be blank if u have not mentioned any HTML coding in servlet file.
so i need to knw how to call back that prev HTML file so that the things i want to display can be displayed, i knw the same can be done by adding the HTML code in servlet file but i would like to know if there is any way to call back the HTML file.

Why does iCal no longer sync with BusyCal (and vice/versa)?

My Calender application is BusyCal. I have Mac OS X 10.8.2. BusyCal is version 2.0.1. Until recently, when I entered something in BusyCal, the same information appeared in iCal. When I entered something on my iPhone in iCal, the same information appeared in BusyCal on my iMac. - Everything was perfect.
This is no longer the case. I asked the BusyCal developpers. Here what they replied:
"I'm sorry, but Apple deprecated Mac OS X Sync Services in 10.8, there is nothing BusyMac can do to work around this (in either 1.6 or 2.0)"
Who can help? - Thanks!
Peterfromwinterthur

Fortunately I have found a solution and resolved the problem: i learned how to sync via iCloud:
in iBooks i found the e-book "Take Control of Calender Syncing and Sharing With BusyCal".
I followed the easy written instructions step by step. Now, with iCloud, BusyCal syncs again with iCal (Calender)! And the Calender information on my Calenders on my iPhone and my iPad are both up to date.
I am happy and thank you all!

In the cell size (print tab) it's necessary to add a switch button to change width with height and vice versa.

like in cut tools in photoshop it's necessary to implement this simple button.

Ok.
I use the lightroom print module to print several images on a paper roll. When i add cells of certain measures i can simply drag the pictures in the cells and go on. To optimize the space sometimes i need to rotate the cells. Yes, i can drag an image in a cell for example AxB and then click rotate on the cell to let it be BxA. But this is already when you drag the image in the cell.
Sometimes i just enter the width and height in the opposite way and i have to click again on the custom cell windows and rewrite it.
I need the button inside the custom cell window.

Replication of Custom Fields from CRM to ISU and Vice versa

Hi Experts,
We are working on adding Z fields on BP level. For this how does the replication of the values takes place from CRM to ISU or vice versa. What are the middleware enhancement we need to do in CRM side or in the ISU side. We would add the fields on web UI crm side by AET but at ISU side how we need to do that and how would the field values replicate in both the system.
A approach for adding BP custom fields in CRM and its interaction with ISU and vice versa would be appriciated.
Thanks,
Mayur

Excuse, you may enter more in detail?
I have created a custom field on BP using the AET would now like to replicate this custom field in BP also in ISU.
I can do all this using the EEWB, but I would avoid it, since, in ISU we already have custom fields on BP, I just can not link them with CRM.

HT201471 will the Sprint model work on Verizon and vice versa?

4th Generation Ipad.
Will the Sprint model work with Verizon and vice versa? I understand they are both CDMA
I see different prices out on the web

To clarify further, the CDMA network is where the LTE comes in, correct?
Because I have a Sprint iPad 4 (ME411LL/A) with a Verizon LTE SIM card in it and can get decent 3G, but no 4G LTE.
As I posted elsewhere:
I bought an "unlocked" Sprint Gen4 iPad 128GB (ME411LL/A) for cheap and was hoping to use it on Verizon (my family plan). So far it's a bust. The Verizon Store and Customer Support won't touch it!
I found online that folks are taking active Verizon 4G LTE SIM cards and popping them into other LTE devices and having success.
I just happen to have a Verizon JetPack 4G LTE hotspot. I pulled the mini-SIM, cut it down to micro (re-verified it still works in the hotspot) and popped it into the iPad. I can get Verizon 3G, but no better.
Any thoughts?
I also found that Verizon LTE is 700 MHz and Sprint LTE is 800 MHz. Is this a showstopper?
If I cannot get LTE to work, I will sell it to a real Sprint customer.

Garageband Files on Logic Express and vice versa

My daughter uses Logic Express at school (sorry, I don't know which version). She has been trying to do her homework on our eMac (OS 10.3.9) using Garageband 1 and her M-Audio midi/usb keyboard via USB.
Her teacher says that Garageband files should work fine with Logic Express and vice versa.
The problem is they don't. We have tried importing files, also saving in one programme and opening in the other - all to no avail.
Presumably we are doing something wrong somewhere. Does anyone know how to get Logic Express to use Garageband 1 files and vice versa, please?
One more point of information, she saves the files to a 'PikaOne Slim Flycase' 40gb Portable HD to take to school to use on an Apple Laptop type computer (Powerbook?). Both home and school machines appear to be working perfectly with this device.
She also has some software called 'Logic Hit Kit' but I don't think this is has anything to do with Logic Express. It's files do not work with Logic Express either
PM6500/300 (603e) Mac OS 9.1.x

That is correct, and you still have your level
status, it just doesn't show. I read in The Lounge
(for level 4 & 5) that they were planning to return
the level status and custom icons to the forum. But
it has been a long time now, and they haven't. I miss
my custom icon
Yes, apparently they intend to at some point. But, they have more pressing things to attend to first, so it might be a while. I have discovered that there's a special forum about this.

My new iphone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete it on my phone and vice versa. Is there any way to get a true synch?.

My new iPhone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete the email on my phone and vice versa. Is there any way to get a true synch?.

POP does not support synchronization between the server and clients. You will need to use IMAP or Exchange Active Sync if your email provider supports it.

Mac OS 10 can't see files on HD coming from OS 9 and vice versa?

Hello, all! Got a TiBook 1Ghz with a 255 GB HD which I've partitioned in half, one for Tiger/OS 9 and one for Leopard. Problem: Any file placed on Vol 2 in OSX is invisible in OS 9 and vice versa, so one writes over the other. Vol 1 works fine. Tried reformatting, disk repair, DiskWarrior 9 and 10, re-installing all the operating systems. Suggestions? Thanks!

Hi, kennethfromtoronto & BGreg! I do know that OS 9 is not supported by Leopard, however I'm not talking about running 9 in Classic. This TiBook will run 9 by itself, but when I run OS 9 it is from Volume 1 which also has Tiger installed. I can boot from Tiger or from OS 9 from Volume 1 and they both run just fine.
The problem is that when do I boot from OS 9, it can't see the files on Volume 2 that were placed there under OS X Tiger. Conversely, when I run Tiger, the files I put on Vol 2 while running OS 9 are not visible. It's like I'm running a parallel universe. Unfortunately, this allows one system to overwrite whatever was put on the volume from the other system, and vice versa, with the net effect that I don't dare run OS 9 for fear of overwriting data on Volume 2.
Also when I do run Leopard from the second volume, it also cannot see any files on Volume 2 that were put there under OS 9.
Note that with Volume 1 there is no visibility problem, no matter which of the three systems is running. It happens with the second volume, whether it has an operating system installed on it or not.
Usually I am good at figuring this stuff out, but you see how confusing this is... My thinking is there might be a bug in the Apple formatting software? I used the Disk Utility from my external hard drive which runs Leopard.
Makes a good puzzle to solve, anyway... Thanks for the help!
DQM

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

How to link idoc with its corresponding documents and vice versa...

Hello Experts,
What are the tables, transactions, etc that can link a certain document(e.g. PO, GR, invoice) to its IDoc and
vice versa.
Thank you guys and take care!

Hi,
The Message Control parameters from the partner profiles must also match the corresponding
fields in the output type. These parameters include:
u2212 Application
u2212 Partner
u2212 Partner function
u2212 Output type
Tcode - NACE (Output Control)
Tables - SRRELROLES (Object Relationship Service: Roles)
Message Control is a mechanism by which documents are output based on certain conditions.
1) The application id, communication structure and o/p determination procedure are responsible for triggering IDocs corresponding to a particular application document. For this to happen message control settings have to be done.
2) Message Control u2013 also referred to as output control or conditioning technique u2013 is a cross-application component used as a service program in several areas. The basic concept behind Message control is to generate and manage outputs from an application and control their timings and medium of exchange.
3) Message control settings can be done via transaction NACE or via transaction NACO.
4) Starting point in message control in the u201COutput Determination Procedureu201D (Procedure within NACE txn.). Depending upon the configuration setting in SPRO this procedure is determined.
A procedure defines a set of possible outputs for an application. We can define several procedures for an application, but only one can be configured as
active (i.e. for a particular transaction document within an application only one procedure will be determined based on configuration settings).
Eg->
a) For Delivery (txn. VL01NO) the document type setting in configuration (SPRO -> Logistics Execution -> Shipping -> Deliveries -> Define Delivery types) determines the procedure.
So whenever we save a document of particular application (of particular application id) and of particular document type, the particular o/p determination procedure is triggered.
b) For sales, SPRO -> Sales and Distribution -> Basic Functions -> Output Control -> Output Determination -> Output Determination Using the Condition Technique.
5) In the transaction NACE we can see that corresponding to application id (say u2018V2u2019 (shipping)) various procedures are defined:
6) Before making the entry of the output type corresponding to a particular procedure, we have to define it with its attributes.
The output type defines the characteristics and attributes of the output itself. We can access the output types on transaction NACE by selecting an application and clicking the Output type button.
7) Access sequence defines a sequence in which business rules are checked for proposing an output type. It has following attributes:
- A set of business rules or conditions.
- A sequence in which the rules or conditions are checked.
- A requirement that checks for business rules using ABAP programs.
- An exclusive or inclusive strategy.
We can access the access sequences on transaction NACE by selecting an application and clicking the Access Sequences button.
Business rule 1 is based on SOrg./Distrib.Ch/Division/Customer. Business rule 2 is based on Sales Organization/Customer Number. Each business rule is, effectively, a set of fields defined in a condition table.
8) Condition table specifies the key fields for a business rule. Hence for Business rule 1 the key is Sales Org., Distribution Channel, Division and Customer.
9) Condition records are inserted in the condition table. The transaction is evaluated with the key (of the condition table based on business rule) and if the transactional data matches with the condition record the output is proposed.
Condition records are defined at last.
10) Several programs and tables are part of Message Control. For EDI, the following tables and programs will frequently be dealt with:
*NAST - This table has an entry for the processing program used for an output type.
*TNAPR - This table has an entry for the processing program used for an output type.
*RSNAST00 - This program is used to process entries in the NAST table.
*RSNASTED - This processing program exists for each output medium. ALE_PROCESSING is the routine in the RSNASTED program to process ALE outputs.
11) Final overview of the components used in Message control to propose outputs.
12) After doing all the settings for message control, the partner profile setting for this ALE scenario needs to be accomplished. We need to add the following entry to the outbound parameters of the partner profile:
13) One important question that arises at this juncture is, how is the partner profile determined from the output type is case of ALE?
This is information is stored in table EDP12 (Partner Profile: Outbound with Message Control). Based on the Partner type of receiver (RCVPRT), output type (KSCHL) and Application for message conditions - without value table (KAPPL), the Partner number of receiver (RCVPRN), Outbound process code(EVCODA), Message type (MESTYP) and other related values are determined.
Regards
Pugazhenthi.P

Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?

Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?

For small amount of files, a regular USB stick or drive, it's already formatted with a MBR and FAT32 most likely which works both on PC's and Mac's.
External drives if you need more space.
However FAT (or Fat32 or MSDOS) has a 4GB file size limit. So if your transfering files bigger than that then you need to format it exFAT on the Windows machine.
Vista and Win 7 can do this, Windows XP one can download a free exFAT upgrade from Microsoft.
Mac's can read/write the MBR and FAT/exFAT (10.6.5 and later) formats, it's best to format it on the Windows machine, even though the Mac can format it too, it's better to do it on Windows then take it to the Mac to confirm.
Rack your brain here on it.
https://discussions.apple.com/message/16317478#16317478

HT1766 Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

Hi, I share an iTunes account with my wife. Sometimes she gets my iMessages and I don't and vice versa. Also if people face time me it goes to her phone. How can I stop this from happening?

You can share the same Apple ID in
Settings > iTunes & App Store > Apple ID: here
But for all other Apple services like:
FaceTime, iMessage, iCloud, etc, one of you should use a different Apple ID.

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

Exchange logic files with cubase and vice versa?

Similar Messages

Maybe you are looking for