Exchange not recognizing user name or password

I can not get pass this...it will not recognize the username or password....
I have tried all the suggested ways to put my username in but nothing seems to work...
Any suggestions that I might have overlooked.
The imap switch is turned on. There is no ssl security.

Is this for sending or receiving?

Similar Messages

ICal not recognizing user name or password when it previously did

I'm getting this all of sudden: "The server did not recognize your user name or password for account 'iCloud.' Make sure you enter them correctly". Yet, there is no where for me to re-enter my info. How do I get my computer ical and iCloud to re-sync? Both, on my iphone and macbook, the icloud selctions for calendars are checked. I did not change anything before this happen; and, all my other applications are syncing up perfectly.

Yes same here - I think it is because after downloading and then getting rid of the buggy mackeeper I have changed some of my keychain permissions - but like you I get the message without any indication of here to put my password into? checked my preferences for icloud and etc and all seems fine???? where do I enter them???
"The server did not recognize your user name or password for account “iCloud.” Make sure you enter them correctly."

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Server did not recognize user name or password - i have changed password in mobile me. where else does it need to be changed?

Where exactly to my passwords need to match up? I changed my mobile me password and mobileme is working fine. When I try to access my calendar, it gives me the "Server did not recognize user name or password" warning and ical will not load. Where else does my password need to be ch

Hi birdman07,
You need to go into iCal and manually change the password.
iCal > Preferences > Accounts > MobileMe email address (CalDAV) > Account Information
I ran into the same problem when I recently changed my password for MobileMe and this resolved it.

Skype Not Recognizing User Name with New Password

It is for my family account with my wife. I had to reset my password because I forgot it, but once I followed the steps as provided by the skype website, skype didn't recognized my skype name. For a minute, I thought I might have forgotten the name, but I sent a text to a friend asking him what my skype name was. He sent me the information with a picture, and I had the name right. So pissed off at skype right now!

When I initially tried to sign in using my Skype name I couldn't remember my password, so I clicked on the "forgot password" link. The Skype website then redirected me asking for my Microsoft account, which I entered and then reset the password once it asked me to do so. I then went back to the Skype program with the new password and was told that the Skype name and password do not match. When this happened I attempted to sign in just using my Microsoft account, but the website kept redirecting me to a page asking me for my Skype name and password. I even tried the "Sign in using Facebook" option and that even failed because it did the same thing: requesting my Skype name and password. In otherwords, signing with my Microsoft account doesn't work because once I enter that information, it prompts me for my Skype name and password, which is does not recognize - even though the Skype name is clearly listed as mine through my friend's information. It was just turning me is circles.

Can't email photos from iPhoto as server does not recognize user name or password

How can I fix this? I use MS office outlook for mac 2011 - I don't seem to have problems otherwise, or on iphone.

That's not the problem. If you have Apple Mail, you have to separately configure the passwords for iPhoto as well. Even though you have entered your email accounts and passwords properly in the email area, you have to re-enter the correct passwwords for all the email accounts registered under iPhoto/Preferences/Accounts; make sure to save each password, then close iPhoto and reopen it. Then you will be able to send the pix!!
Cheers,
Jim

Installing Applications not requiring user name and password?

Hi, I'm experiencing the bug that everyone is experiencing where my suer doesn't have administrative rights to my computer. But I seem to be operating fine.
The question I have is, should I be able to install applications without a username or password? When I just installed Adobe Flash Player 9 on my computer (downloaded from Adobe) it didn't require a username or password. Has anyone else experienced this? I have always been asked for it in the past. What is up with that?

This was an fresh install of Leopard without any historical data. I did restore my backed up my documents folder once leopard was installed but that was it. It seemed this all started when I tried to install some software and discovered that I no longer had an administrative user for my computer. Regardless it does concern me that there is a way for software to be installed into Leopard under the right circumstances. I finally was able to get my user back to admin rights via a workaround where I enable the "root" user. Anyway I finally gave up and went back to Tiger (luckily have been doing regular back-ups of my data). I am going to report these bugs to Apple or try to anyway. I'm just frustrated that things went so bad so quickly and I don't feel like I was doing anything out of the ordinary with my computer. I have done first installs of mac OS's the week they came out in the past and have never seen anything like this.

Locked PDF files will not open with user name and password. Help?

I go to school online and our eBooks are in pdf format. I download them to my MacBook so that I can read them offline. When I download them, they open as they always did but, when I put my username and password in to unlock them, it tells me something about the file is edited and a copy will be saved but, it never opens the file. I have adobe reader on it, I am getting frustrated! I don't want to be logged into class every time I am studying material. Any ideas? Thanks in advance - this is my first Mac so, bare with me

Not using netwok magic. I shut it down when it comes up. I have tried using 192.168.1.1 but still will not accept user name and password. I never changed the factory default and it just continues to ask for the user name and password. Web utility site will not come up. I have a wired desktop as my main computer and that is the computer I have been trying to access the utility from.

TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

One user unable to login to OWA - error :" The user name or password that you entered is not valid. Try entering it again." exchange 2007 SP3

Hello Guys,
exchange 2007 SP3
windows 2008 r2
we have one user who unable to login to owa with error -"The user name or password that you entered is not valid. Try entering it again."
we checked mailbox feature in EMC and owa is enable
checked adsiedit - looks good
we checked allow inheritance - checked
we reset the password and try to login to owa from exchange server , no luck
user can login to her computer and outlook without any issue
we also moved her mailbox to another server
user facing the same issue from office and VPN
any suggestion ?
Thanks
Sandip
sandip

Hello Lynn
thanks for the reply. but I already checked that and allow inheritance already checked .
when user unable to access webmail with error "The user name or password that you entered is not valid"
will it generate any event id on exchange server or domain controller ?
in our case we have mailbox and CAS on different servers
any suggestion .
Regards
Sandip
sandip

Exchange 2013 OWA user must change password at next logon not working

Hi,
I have installed Exchange 2013 on Windows 2012 Server. I create users in ECP and select "user must change password at next logon" option. When newly created user logs in, the OWA page doesn't prompt for password change and just throws error "The
user name or password you entered isn't correct. Try entering it again"
I have enabled Change Password feature in CAS server, but still not working.
Any answers, suggestions would be great help
Regards
Sunil

Hi Sunil,
Have you tried as Martina said and does it work?
If not, please try to set the Minimum Password Age to 1 according to link below. I found some threads which are similar to yours and were solved by this way in Exchange 2013 environment.
http://support.microsoft.com/kb/827614
And for further troubleshooting, please create a new user with "user must change password at next logon" option checked and see if he can log on domain-joined PC.
In addition, please check the event log to see if there is any related error message.
Regards,
Rebecca

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

My ipad receives email with the hotel wifi but will not send. The error message is "user name or password for ........is incorrect" but both are correct and unchanged. Restarting iPad didnt help.

My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.

I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

Exchange not recognizing user name or password

Similar Messages

Maybe you are looking for