Exchange of the old iMac for a new

I have an iMac with core 2duo.. I brough it in December 2009 with 3 years warrenty. With the arrival of new iMac with I5/I7, I was wondering if Apple allows any upgrade option with exchange of old with a new... of course with some fees.

No your best bet is to either have it sell it yourself on Ebay or Craigslist. If you don't want to do that Apple has a recycling program where they will give you a gift card that you can use against the purchase of a new machine. You can find the program at http://www.apple.com/recycling/computer/

Similar Messages

Upgrade the old iMac before migrating to a new one or not?

Hi all,
I am planning to buy a new iMac and would like to migrate some of my stuff to it from an old iMac. And then I would also like to migrate some of my stuff from a still older MacBook onto this old iMac. Complicated enough? :-)
In short:
Step one: stuff from my 5 year old iMac with OS 10.7.5 Lion on it migrates to -----> a brand new iMac with Yosemite.
Step two: stuff from my 8 year old MacBook with OS 10.5.8 on it (and not upgradable any further) migrates to -----> the 5 year old iMac with OS 10.7.5 Lion on it.
Now, my questions are these:
1) Should I first upgrade the 5 year old iMac with OS 10.7.5 Lion on it to Yosemite before migrating my stuff from it to a brand new iMac with preinstalled Yosemite or not? Recommended, not recommended, neutral, what?
2) If the answer to the 1st question is "yes" (recommended), will I then be able to migrate my stuff from the 8 year old MacBook with OS 10.5.8 onto it? That is, will the two migration assistants (of OS 10.9 and OS 10.5) "talk" to each other at all?
Any further tips will be hugely appreciated!
Lots of thanks in advance!

Hi rkaufmann87,
thank you so much for your reply!
I am afraid you misunderstood me a little bit… While you kindly explain to me ways of how to migrate my data from one computer to another, my question was not so much about "how" but rather about "whether":
a) should I first upgrade my old iMac (with 10.7.5 Lion on it) to Yosemite before migrating its data to the new iMac with preinstalled Yosemite? Will it help in any way or is it irrelevant?
b) and if the answer is "yes" (i. e. upgrade the old iMac to Yosemite), whether the migration assistant on the 8 year old MB will then be able to "talk" to its counterpart on the now upgraded old iMac?
Perhaps this too might help:
What I am trying to do is make two computers out of three -
1) My wife's 8 year old MacBook will most probably go to the dustbin. Before it does, I would like to migrate her data to my 5 year old iMac which will then replace her MB (in the dustbin) and be hers forever after.
2) I will certainly have to migrate my own data from my 5 year old iMac to the new iMac which I am about to buy.
So the question remains: upgrade the old iMac for both purposes (s. above - #1 and #2) from Lion to Yosemite - yes, no, doesn't matter, what?
Many thanks again!

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

I have bought a new imac late 2012 and I want to wipe clean my 2008 mac and install Mountain Lion on the old computer for my kids to have

I have bought a new imac late 2012 and I want to wipe clean my 2008 mac and install Mountain Lion on the old computer for my kids to have.
What do I need to do?

Boot your Mac from the System Install DVD that came with it, and erase the HD using Disk Utility. Then, reinstall the OS from the disc. Give the disc to your kids since it must always accompany the Mac it came with.
After the OS installation is complete and the Mac restarts to begin its new owner setup procedure, just shut down the Mac. Your kids can take it from there.
If you purchased Lion or Mountain Lion from the App Store, you cannot transfer it. The Apple ID you used to purchase it is required to maintain and / or reinstall the OS. Unless you want to supply your own Apple ID to your children for their use, they must purchase their own copy of Mountain Lion using their own Apple ID.
If they do not already have an Apple ID and you want them to have Mountain Lion, you will need to create one on their behalf. This does not change the above procedure - just give them the Apple ID and password you create in addition to the Mac and its discs.

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?

Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
If not you can also add a USB drive to the TC, and use that for one of the computers.
The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

What is the best way to transfer my date from my old iMac to my new iMac?

what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
thanks

Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one.
It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible. You can connect both to your netwrork via Ethernet, or put a single cable between the two.
See Using Setup Assistant on Mountain Lion or Lion for details.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How do I go about exchanging an old SIM for a new one?

Got my S5 last week and installed my old SIM card from my previous phone as per the Verizon instructions. Now I am seeing messages on certain apps that say things like "to use Softcard, your phone needs a new SIM". I received a new SIM when I purchased the phone, so how do I now go about exchanging the old SIM for the new one?

Suncrow, congratulations on your upgrade to a new Samsung Galaxy S5! We recommend that you use the new sim card that came with your device. Just power it off and insert the new card. Your device will automatically start the activation process and complete on it's own. Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

How do I translate word perfect old files for my new iMac?

How do I translate Word Perfect old files for my new iMac? They are transferred from a 13-year-old Dell. My McLink did not work.
Thanks.

The current version of the free LibreOffice continues to support Word Perfect documents. OpenOffice had to drop this support due to licensing issues. LO installs in two places: /Applications and your local Library/Application Support directory. Simple to install. Simple to remove. Good PDF documentation from their site. It is a capable MS Office replacement.
I just opened a wpd legal deposition in LO and it looked fine.

HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

See Pondini's Setup New Mac guide for possible answers.

New iMac can't find the old iMac via Ethernet

I just bought a new 27" iMac and I am trying to migrate data from my old iMac.
I have the two machines hooked together via Ethernet and have Etherenet turned on in the source iMac but the new iMac can't find the old iMac. The pinwheel keeps spinning with no success. What should I do here?

Gramps wrote:
What FireWire?
There is no FireWire port on the new machine so this is a non-starter.
Unfortunately you didn't read my post very thoroughly. You are correct, the new iMacs do not include FW however your old Mac probably does. For just that reason and more Apple makes a Thunderbolt to Firewire adapter which you can use if you opt to use FW Target Disk Mode. You can find the adapter by going to your Apple online store or Amazon carries it to. Here is the Amazon link:
http://www.amazon.com/Apple-Thunderbolt-to-FireWire-Adapter/dp/B008RXYOKY/ref=sr _1_1?ie=UTF8&qid=1366831510&sr=8-1&keywords=thunderbolt+to+firewire+cable
However as I mentioned use TM or a bootable clone with Migration Assistant. If your old Mac was using any verison of OS X from Leopard (10.5.x) on at the very least you should have a Time Machine backup!
Also use Pondiini's guide as AnaMusic suggests, it's THE GUIDE for using Migration Assistant and Setup Assistant. He has also created excellent guides for Time Machine too.

Exchange of the old iMac for a new

Similar Messages

Maybe you are looking for