Exchange password failing every day

every day i get an error message that my exchange email password is incorrect. sometimes a window will come up requesting i input the new one, but when i enter there it doesn't work. i have to go into settings and reenter. is anyone else having this issue?

one of the key figure has type INT4. the figure to be uploaded into this key figure is bigger than the upper limit of the INT4 defenition. hence the overflow error
check note 992805
M.

Similar Messages

Apple ID password failing every day

This is getting very frustrating, but the password on my Apple ID is failing every day, sometimes more than once a day. I reset it on every device, and it works for a couple hours, then I have to reset it. Not difficult, but it is a pain. This has been going on for months. Any suggestions?

Are you logged into your account in Settings/Store?

HT3275 My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help

My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.

Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.

Background job getting failed every day

Hi,
This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
SAP_REORG_UPDATERECORDS
SAP_WP_CACHE_RELOAD_FULL
SLCA_LCK_SYNCHOWNERS
Regards
Naanas.

If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
Note 1034532 - Changes for standard jobs
Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates

WRT54GS fails every day 16:30

Greetings,
At my office for the past two weeks, the wireless connection has failed every day at the same time: 4:30pm. I have bypassed the router completely and am able to connect to the internet via cable connection during that time. The modem shows no interruption.
I'm not sure what my next troubleshooting steps would be...any words of advice?
Cheers!

Maybe you changed your router settings(Access Restriction or so)...Just reset the router to factory defaults...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Also disable any firewalls, security softwares on the computer before trying to access the setup page...

Yahoo! iChat Login Fails every Day

Every day i start ichat and all the accounts log-in just fine. except the yahoo account, which keeps asking me for a password, which even if entered properly won't get accepted. after a while i eventually gave up and stopped using ichat for Yahoo.
strangely enough a few weeks later i tried it again and it logged me in without a problem, which lasted exactly for a day. and then i was back to the same behavior.
i figured that what "made it work" was to log-in to yahoo's website with my Y! ID and then iChat would also allow to login properly. So now, every morning i first log in to yahoo's website, then open ichat and it works ... yet it is VERY annoying.
any other yahoo IM client (adium or yahoo messenger) do not have this bahvior. has anyone figured out how to get ichat to log into yahoo without all those issues?
thanks in advance,
patrick.

HI,
Are you using iChat 6 or Messages in Mountain Lion ?
It seems in both versions the info in the App Menu > Preferences > Accounts > Yahoo Account only lists the Account info and nothing about the server and ports it is using.
The Yahoo option works by using a different plug-in to iChat (or Messages) compared to a Jabber or an AIM Account and is not using the IMAgent that the others use.
The Yahoo account logs in on port 443 to api.login.yahoo.com
It also logs in to a Buddy Image servers to get Buddy pics on port 80 plus two other servers that are probably to do with Status of your Buddy List and their developer server.
Most routers would have these ports open.
The Mac Firewall, if ON, should be set to Allowed Signed Software and iChat should be in the list
You should also see IMAgent and IMServicePlugInAgent for the Yahoo option listed.
10:55 AM Tuesday; April 2, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Rollup process is failing every day

Hi,
Bi statistics data is loading to info cube and this cube have Adjust process in process chain.
Adjust process is failing daily and giving following 18 messages and showing 16th point as error.
And one more thing is, even though Adjust process is failu2026.at cube level compression of aggregates and rollup of cube and aggregates is happening daily but in process chain this adjust process is failing daily.
     1. Roll up aggregates of Info Cube 0TCT_C01
     2. Rollup is running: Data target 0TCT_C01, from 0000603080 to 0000603371
     3. Editing of aggregate 100533 in main process
     4. Aggregate 100533(0TCT_C01) is rolled up to 603371
     5. Aggregate 100533 (0TCT_C01) rolled up in 4 seconds
     6. 1 aggregates are condensed
     7. Editing of aggregate 100533 in main process
     8. Aggregate 100533 is condensed to 0REQUID <= 603371 and 0CNSID <= 0
     9. Aggregation of Info Cube 100533 to request 603371
     10. Statistic data written
     11. Requirements check compelted: ok
     12. enqueue set: 100533
     13. compond index checked on table: /BIC/E100533
     14. Request statistics calculated for p-dimid 1864
     15. enqueue released: 100533
     16. *******SQL0802N Arithmetic overflow or other arithmetic exception occurred. SQLSTATE=22003 row=1***error
     17. Rollup was successful: Data target 0TCT_C01, from 0000603080 to 0000603371
     18. Rollup is finished: Data target 0TCT_C01, from 0000603080 to 0000603371
Can anybody please tell what is happening here and how we can avoid this perminently.ASAP?
Thanks and Regards,
Venkat

one of the key figure has type INT4. the figure to be uploaded into this key figure is bigger than the upper limit of the INT4 defenition. hence the overflow error
check note 992805
M.

Mail password required every day or two.

Didn't do this until recently. OS x 10.7.3 Lion.

It may not be a problem on your computer. Sometimes this happens when your ISP's mail server is flaky or offline. Mail can't connect, so it asks you to input your password again.
Mail > Window > Connection Doctor ...
... can help you find out if this is the case

Logon Password Fails Every Time

Hi all,
I have been using this machine (G-4 0SX 10.2) at work for 3 years with the same username and password. We just got our T-line upgraded, and I magically can't logon to this particular machine anymore. I have tried using Norton Systemworks (which found and fixed major errors on two of the Hard Drives) but still can't logon. Any idea why my username and password would just stop working after upgrading the networK?

Welcome To Discussions stinkron ohio!
The first order of business is to uninstall Norton applications, with the possible exception of NAV, if they are installed!
Instructions in these links:
Norton Complete Uninstall
Remove Symantec Mac Files
37 Steps To Manually Uninstall Norton SW
Hopefully your system has not been compromised beyond repair.
Run Disk Repair & Repair Permissions, and report the results.
If those are successful, I'm not sure if this will help, but reset your password, using the instructions in one of these links:
Changing or resetting an account password
Changing your administrator password
Good Luck!
ali b

Why does the 3g data network fail every day?

Goes down for at least an hour a day

Is this in a highly populated area? Is it the same location and time usually?

I have to reset the password of sa every day.

hi
I have sql 2012 working OK. from last few days my 'sa' password is getting
re-set automatically. i know it is not possible but it is happening to me.
then i have to login with window authn. and reset password almost every
day.
Even i have formatted a server and scanned with anti-virus too. Even
though problem is there.
please help me as soon as possible.thanks

John
M. Mahfoud EL HOUDAIGUI is right. Sa should be disabled for the servers that work with web application as it exposure over an internet. There is no such document that
states we need to disable that login but if you worked with web application you probably know that hackers try to capture the SA password first.....
This from SQL Server 2012 best sequrity practice document
Best practices for authentication mode and logins
Always use Windows Authentication mode if possible.
Use Mixed Mode Authentication only for legacy applications, non-Windows users, and users from untrusted domains.
Use the standard login DDL statements instead of the compatibility system procedures.
It the sa account is not going to be used, you should disable it. Change the
sa account password to a known value if you might ever need to use it. Always use a strong password for the
sa account and change the sa account password periodically.
Do not manage SQL Server by using the sa login account; assign
sysadmin privilege to a knows user or group.
Rename the sa account to a different account name to prevent attacks on the
sa account by name.
Do not delete internal built-in logins
Use Windows Logins rather than Windows Group to control access to SQL Server and use care when using Windows Group logins to prevent group overlap for a particular user.
Use login triggers for more granular control of the login process
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

SCOM 2012 R2 Exchange Correlation Service , we receive almost at every day in the Event log Application the Event720

HI
Since the SCOM was Upgrade to R2
Almost at every Day, we receive in the Event log application the Event 720 from the correlation service Source MSExchangeMonitoring Correlation
This arrives always around 7:20AM, someday is at 7:19, other at 7:21. It is always approximately at the same hour, but we never have any problem during weekend
The description of the Event
Exceeded maximum time (15 minutes) to wait for completion of all CorrelateBatchTask threads.
After that the correlation stop to work. At the Same time if we tried to open the SCOM Console on that server we was unable to open it. Also we was not able to open the SCOM PowerShell
And also we cannot from that server to get which server is the RMS if we run get-SCOMRMSEmulator . (This the RMS Server)
When this arrive, the only thing we found, it to reboot the server or restart de SCOM service, after the Reboot the Correlation begin to work
We got also many Event 714 Critical and after this Event 711 Warning
Thank

Have a look at: https://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
One user reported an issue with the exchange correlation engine after upgrade and said that:
I had issues with the corellation engine after upgrading scom 2012 to R2.
The MomBidLdr.dll version changed in the SCOM directories, and needs to be updated in the:
C:\Program Files\Microsoft\Exchange Server\v14\Bin directory.
That seemed to stop the errors for me.
Some troubleshooting steps listed here also:
https://technet.microsoft.com/en-us/library/ff360495(v=exchg.140).aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Prompts for Exchange password every morning

We recently migrated all of our users over to Exchange 2010. After the switch, some of our iPhone users are receiving a prompt each morning to enter their Exchange password. If the user clicks "OK" or "Cancel" the message goes away and their mail works fine the rest of the day. That is, until the next morning when the prompt appears again. I don't know the exact time that this happens, but each user just says when they wake and unlock their phone, the prompt is on the screen. I've been working with MS Exchange support for a month now with no luck. It's such a hard thing to troubleshoot when it only happens once a day and I cannot force the error to happen until the next morning.
This is not happening to all of our iPhone users, just some. My iPhone has been fine from day one. MS Support can't seem to find anything different about my account (or any of the working accounts) compared to the accounts that are getting the prompts.
Has anyone seen this before? Or know how to fix? I've found a couple "fixes" online in some forums but none of them have worked for us.

I have the exact same issue on my iPhone and iPad. Our company just migrated to exchange 2007 in November. Each morning I get the promptmon both devices after unlock. I thought this was due to our company lock out from 12am - 6am for backups, but hearing you have the issue has me thinking it's a software bug.
I also am having isssues with the phone downloading messages. It just keeps saying "connecting" but takes in some cases 30-60 minutes. This is even with 5 cell bars and full n band wifi. I also am running MobileMe and gmail on the phone, but only MobileMe and exchange are set form push.
Please help if you can. Thank you.

Every day Expired subscription clean up job fails on publisher server

Dear All,
Few days back I configured transactional replication b/w 2 server after that every day I noticed
Expired subscription clean up job fails on publisher server but not any effect to replication it's going smooth.
ERROR MESSAGE:
Only functions and some extended stored procedures can be executed from within a function. [SQLSTATE 42000] (Error 557). The step failed
please help me!!!
Thank In Advance!!!
mastanvali shaik

Actuvally already I configured replication for this server 3 database after we moved to another server for some h/w issue.
that time we deleted subscriber and publisher and break transaction replication.
after new server configuration it's allow to configure replication for 2 databases only.
as per above query I found category 1 for 3 databases but 2 databases are in replication.
the another databases that showing category 1 is past in replication, but it doesn't allow to configure replication.
please give me solution for same .
Db name
dbid
sid
mode
status
status2
category
cmptlevel
version
ABCD
7
0x010500000000000515000000C953D90F09EF4A00F4EBEF3281230000
0
65536
1090519040
1
100
661
-replication running
FGH
11
0x010500000000000515000000C953D90F09EF4A00F4EBEF3281230000
0
65536
1090519040
1
100
661
- not allowing for replication
XYZ
12
0x0105000000000005150000006FE21C5B049413F15AD147AEF4010000
0
65536
1090519040
1
100
661
-replication running
past replication working for three databases
mastanvali shaik

Why am I being asked to reset my Apple ID Password every day or 2??

Every day or 2 I am being told my password is invalid and I am receiving e-mails from Apple saying my password has been reset. It is getting rather annoying have to enter a new password every 2 days!! Any help???

Cause you entering incorrect info for login too many times. Perhaps mixup happens cause you use more then one ID and it gets hard to control which password you use for which id. Suggest come up with ONE password and next time you are prompted to do that on another account, use same password. If I am wrong, and you do not have more then one account - may be someone else is using your account or trying to login with incorrect info that they deem to be correct.

Exchange password failing every day

Similar Messages

Maybe you are looking for