Exchange Portlet and SSL

Do we have to have a SSL connection available for the Exchange 2000 portlet to use the following method "authenticateUser" specifically AuthorizationInfo.setAuthHandler(new SuppliedUPAuthHandler(user,password) in the ApplicationLogin.class.
Tx.

I will try that. I was getting an error class not found javax.net.ssl.SSL.socket when trying to debug the Java classes in JDeveloper.

Similar Messages

SBS 11 - Exchange 2010 and SSL certificates - Event ID 12014

I've recently upgraded my Exchange '10 to SP3 on our SBS11 server and I've noticed an event ID 12014:
Microsoft Exchange could not find a certificate that contains the domain name
mail.mydomain.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Windows SBS Internet Send
SERVERNAME with a FQDN parameter of mail.mydomain.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate
with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key.
I currently have a third-party cert installed on this server with SMTP, POP, IMAP, and IIS services attached to it. The cert is for
remote.mydomain.com
I do not have a cert installed (self-signed or otherwise) for mail.mydomain.com
My send connector HELO/ELHO is mail.mydomain.com
My receive connector HELO/ELHO is SERVERNAME.mydomain.local
My MX record at NS is pointing to mail.mydomain.com
My question is should I change both my send and receive connectors to
remote.mydomain.com?
Would I then change my MX record with NS to point to
remote.mydomain.com? Any potential errors with doing this?
Should I buy another third-party cert for mail.mydomain.com and install that cert for mail services? (Although it seems SBS hates using more than one third-party cert).
What's my best option here and what is best practice?
Thanks in advance!

I'm using SBS 2008 but it should be the same
Send Connector
Send -> remote.xxxxxx.com
Receive Connector
Default SBServer -> SBServer.xxxxx.local
Windows SBS Internet Receive SBSERVER -> remote.xxxxxxx.com
Windows SBS Fax Sharepoint Receive SBSERVER - > SBSERVER.xxxxx.Local
Network Solutions
A Record
remote.xxxxxxxxxxxxxxxxx.com Points to SBS server ip address
MX Record
Points to remote.xxxxxxxxxxxxxxxxx.com

Does Oracle Exchange Portlet 2003 Support SSL?

I installed the Oracle Exchange Portlet 2003 successfully. However, when enabling SSL on the Webmail (frontend) of Exchange Server, I got the some SSL handshake error. Just wonder whether the portlet support the SSL.
Failed to handle HTTP Request
java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed:
X509CertChainIncompleteErr
Any advise will be welcomed.
Thanks a lot in advance.

Hi Zhan,
I am not sure that the Exchange portlets support SSL. I will find out more info and get back to you.
thanks,
Harsha

Mail for Exchange and SSL certificate

I have a little problem with Mail For Exchange and my Nokia N80. I have self-signed certificate for Exchange mailserver and when I am synchronizing e-mails I got always message: "The site has sent an untrusted certificate. Continue anyway ?". I underestand that my certificate isn't verified by any root authority, but if I have synchronization schedule set at 15 minutes it means I have to confirm this message four times when I am not with my mobile one hour. So question is:
Is possible to import self-signed SSL certificate into Nokia N80 and set it as trusted ? If yes, please describe me how, because I have tried import the certificate as CER (it was opened just as NOTE on Nokia), I tried to convert it via openssl to PEM (the file was not recognized) etc... Thanks for any help in advance.
Reply With Quote

Go to your outlook web access website and click on the lock and then view certificate. The details and then you can save it in DER format to your desktop.
Then go to this site:
http://www.redelijkheid.com/symcaimport/ and insert through the browse button and then copy the link to your phone.
Then you should be able to download it
You can also go to your IIS default site on the exchange server and directory security and export your certificate under edit certificate.
I have tried everything now. I can download my certificate and the valicert from GoDaddy, but the Nokia phone is still saying "do you trust this certificate" every time the phone syncs.
Our firm have taken the E-phones away now and went over to windows mobile and all of them worked within 10 minutes without any errors.
The funny thing is that when you try to call nokia, they wont help you with Mail for Exchange, and it is there program
I know my GoDaddy certificate works on windows mobile phones, so It must be something with Mail for Exchange.
Every guy I talked to about symbian phones have told me they always gives problems with SSL. I am a bit **bleep**, but can conclude that Nokia is for the private consumer.
Best Regards
Morten @ Denmark
Message Edited by asp3200 on 02-May-2008 08:37 AM

Expected behavior of the Exchange portlets in release 2

I've installed the Exchange portlets in release 2 successfully. Everything works - Inbox, Calendar, Contact list. However when you update the portlet with required information i.e. Inbox user name, server, # of message rows, the portlet displays the view, but once you go to a different page and then decide to return to the page with the Exchange portlets, you need to enter that very same information again. Is this the way it is suppose to work???
Please share your experiences.
Thanks,
r/ George

George,
This may be a pain for you, but could you please walk me through the steps that you took to get the exchange portlets working? We are trying to install the exchange5.5 portlets. We are currently using Portal release 9.2.1.2.14 (i think that's it - latest release) and have upgraded to 9.0.2.4 via the December PDK we downloaded. We have also made the appropriate setup to the IIS/Exchange server and can view the test.asp pages that were provided. Do you need to deploy an .ear file on OC4J for the exchange5.5 portlets like you do for the exchange2000 portlets? Any help would be appreciated and we have read the documentation included with the Dec. pdk.zip release to no avail. Thank you.
Jeremy

EXCHANGE PORTLET IN CLUSTER MACHINE

Hi,
I was setting the exchange portlet, but the machine residing IIS and the outlook is in a cluster how can I configure the portlet in the cluster?, is there any special instruction to setting the portlet?, I have to do the same twice in each machine or this is not supported?
Thanks a lot.
Cecilia Vega

Hi Cecilia,
I have not tested Microsoft exchange portlets in a cluster environment. But I feel these portlets should work fine in a cluster environment too.
A few questions though,
1. "Outlook is in a cluster", can you please elaborate on this. As the there is no dependency on Outlook for the portlets to work.
2. Can you let me know details of Cluster environment and the version of the Windows/ IIS and Exchange server that you are using.
Answer to the above questions will allow me to answer with more specifics.
But here are a few points for setting up Microsoft portlets in a cluster environment:-
1. Once you set up the Replication and Clustering in IIS, then you will be pointing to one IIS machine where the .asps are hosted. And the failover will be taken care by the clustering environment, you will not have to do any additional settings.
2. You need to keep in mind that ASP sessions do not fail over to other nodes in Microsoft Clustering. This means that clients will need to reestablish the connection if a failover occurs on the server.
Please get back if you face any issues.
Take care,
Manoj

Exchange Portlet - Session Cookies - Collapsing Portlets

I am having trouble with the exchange portlet collapsing when refreshed.
I have been tracing through the code and narrowed it down to a missing cookie in the PortletRenderRequest object.
The process method in ExchangeProvider creates a new ApplicationLogin object using the PortletRenderRequest object.
When the ApplicationLogin object is created it scans the cookie list in the request object for the exchangecookie which it then uses to populate the login details and sets the logged-in flag to true, if it can't find the cookie it assumes the caller is not logged in and sets the logged-in flag to false.
The first time the ExchangeProvider.process method is called there are two cookies in the list (an exchangecookie and a JServSessionIdroot cookie) which is fine because it sets up the users details as expected, the second time it gets called (when you refresh the page) the exchangecookie has disappeared from the request object, so it leaves the ApplicationLogin object in the logged-in = false state, which inturn means the page does not get rendered.
Does anyone know when the exchangecookie gets created and when it gets passed around? This would help in tracking down the error, or better still does anyone know how to fix this problem?
Any help would be greatly appreciated.
DJ
P.S. There is a known problem in Oracle Financials and Application Server with cookies and IE, but this problem occurs in IE and NS so it does not appear to be browser dependent.
null

If I comment out caching and set login to "always" the portlets take 2-5 minutes to render, which is not acceptable for deployment.
Can anybody fix the JPDK or the portlets?
John
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Amr El Magayry ([email protected]):
Alan ,
Comment the code that do caching in the begining of each renderShow method in each of the four renderer classes (e.g. InboxRenderer,CalendarRenderer, ...), together with login freqeuncy set to 'Always', it will work.
Pls Send me your code to fix the Ok & Apply buttons in the Customize page.
Amr<HR></BLOCKQUOTE>
null

Missing parameters for Exchange Portlet

In the Exchange Portlet installation document on page 15 under
Stage 3. Changes to zone.properties
the line shows
servlet.exchangeAppProv.initArgs=provider_root=c:\exchange, sessiontimeout=1800000
it should read
servlet.exchangeAppProv.initArgs=provider_root=c:\exchange, sessiontimeout=1800000, debuglevel=1
This will allow the execution of the servlet/exchangeAppProv/ URL and verification of the exchange Portlet Provider configuration
null

Yes, I have been using $_REQUEST.
The test script looks like this:
<?php
$latin_name = $_REQUEST['latname'];
$common_name = $_REQUEST['commname'];
if ($latin_name == "")
$latin_name = "Not available";
$common_name = "Not available";
$connection = mysql_connect("localhost", "user", "pword") or
die ("Unable to connect");
mysql_select_db("balloonflash") or die ("Database not
found");
$query = "INSERT INTO species (latName, commName) VALUES
('$latin_name', '$common_name')";
$result = mysql_query($query) or die ("Unable to execute
query: " . mysql_error());
mysql_close($connection);
?>
It seems like the script is not triggered at all when I run
the Flash form from HTML - I don't even get the default values
entered into the database. Actually, yes I do, my mistake - but the
variable values are not being passed over.
The HTML source generated looks like this:
<OBJECT
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
WIDTH="291" HEIGHT="234" id="flashForm1" ALIGN="">
<PARAM NAME=movie VALUE="flashForm1.swf"> <PARAM
NAME=quality VALUE=high> <PARAM NAME=bgcolor
VALUE=#66FFFF> <EMBED src="flashForm1.swf" quality=high
bgcolor=#66FFFF WIDTH="291" HEIGHT="234" NAME="flashForm1" ALIGN=""
TYPE="application/x-shockwave-flash" PLUGINSPAGE="
http://www.macromedia.com/go/getflashplayer"></EMBED>
</OBJECT>
Alan

Strange url in exchange portlet.

I add exchange portlet into my portal page.
It's fine. But when I try to view inbox contents by clicking the content link, I see attached url(javascript:submitURL2227("right url")) and failed to view them.
Of course, when I access right url,I successed.
Would you help me?
with regards,
eunjoo

Hi,
The javascript:submitURL2227("url") that you see is the URL created by URL based portlets to render content inline.
If you do not want to render content inline, set the <inlineRendering> value in provider.xml to false.
Is there some error being thrown when you click on the link? Look in the application.log file at the following location:
OC4J_PORTAL/j2ee/home/application-deployments/exchange.
Also check for javascript errors in the browser window. Maybe I'll be able to help you better if you can send me the errors.
- Ashish.

Outlook Exchange Portlet

Hi,
We've been trying unsuccessfully for a few days now to get a portlet to connect to our Exchange 5.5 server. Our basic requirement is to have a portlet within our Oracle Portal that can display mailbox statistics (such as the number of unread messages) and that allows the user to 'drill-down' into the Outlook client and access their Inbox and Calendar etc.
We were sent a small portlet from an Oracle consultant but have had no joy in getting it to connect to Exchange.
Would really appreciate any ideas or comments anyone can offer. Surely others have tried something like this before, and surely it cant be too difficult?!
Thanks,
Don

Hi,
Have a look at the Exchange portlets provided by Oracle: http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/SAMPLES/WEBPORTLETS/V2/EXCHANGEPORTLET/EXCHANGE55.ZIP. There's also a version for release 1 on PortalStudio.
It doesn't allow you to drill down into the Outlook client, but instead uses Outlook Web Access to "drill down". I've installed the Exchange 2000 portlets and they work great. You can view your inbox, calendar and contacts as portlets and it's fairly easy to use the supplied code to create your own portlets e.g. for displaying tasks or notes.
If you absolutely need to "drill down" into the Outlook client, you need to run your Portal page as an Outlook Today page (inside Outlook). Look at msdn.microsoft.com for information on how to make your own Outlook Today page.
/Jesper

Deploying exchange portlet.

I wanted to deploy the exchange portlet in Redhat 3.0 server AS 10g installation. I tried this with ORCLADMIN login.
When tried to access this from
http://mydomain:7778/exchange/providers/exchange the following error is displayed.
Provider Test Page: Validation Unsuccessful
The provider definition could not be successfully validated. Errors encountered are shown below. Please address these issues before registering with Oracle9iAS Portal
Error - For input string: "port"
Context - ProviderAdapter > DefaultProviderLoader
Do anybody have a clue? Pls. help....

Change <pageUrl> values in provider.xml. The URL specified in default provider.xml file is a dummy one and it needs to be changed on deployment.
Regards,
Amjad.

Connect refused in Exchange Portlet

Hi,
I am trying to config the exchange portlet using URL-services and basic authentication. When I get to create web provider, the following error show up:
An error occurred when attempting to call the providers register
function. (WWC-43134)
An unexpected error occurred: ORA-29532: Java call terminated by uncaught Java
exception: java.net.ConnectException: Connection refused (WWC-43000)
An unexpected error occurred: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(PlainSocketImpl.java)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java)
at java.net.Socket.<init>(Socket.java)
at java.net.Socket.<init>(Socket.java)
at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java:574)
(WWC-43000)
Any idea?
Thanks.

Do you mean the IsItWorking page or the test.asp in exchange portlet?
They both work fine.
Thanks. I meant neither of these but the test page for provider. The
installation instructions document refers this in the file
"INSTALLING.MICROSOFT.EXCHANGE.55.PORTLETS.html" and under
"Configuring the Web Provider" section. You have to make sure
the provider's servlet alias
http://your_oracle_http_server_hostname:port/servlet/exchange55
is running fine before specifying this URL in the provider registration
screen.
Hope it is clear now :-)
Thanks,
Amjad.

Exchange Portlet 2000

I have installed the exchange server 2000, and on a seperate
machine where i have IIS and outlook installed with all the .dll
files required. On the this machine i followed the steps for
setting the exchange 2000 portlet and when i tried to test the
url http://sctdemo01/exchange_portlet/test.asp?.....
it was giving collaboration type error and from another machine
it was giving Error, becuase of the command:
lngToken = objLogon.ImpersonateToken(sUser, sPassword, sDomain)
so has it worked with anybody
thanks

I have installed the exchange server 2000, and on a seperate
machine where i have IIS and outlook installed with all the .dll
files required. On the this machine i followed the steps for
setting the exchange 2000 portlet and when i tried to test the
url http://sctdemo01/exchange_portlet/test.asp?.....
it was giving collaboration type error and from another machine
it was giving Error, becuase of the command:
lngToken = objLogon.ImpersonateToken(sUser, sPassword, sDomain)
so has it worked with anybody
thanks
As stated in the install guide, if your Exchange server is
running on a separate machine from the IIS server, please make
certain that both machines are on the same Windows domain.

Exchange portlet suite automation

We're using v3.1 of the Exchange Portlet Suite, on our ALUI G6 SP1 environment. It works OK when the user goes into their user preferences and sets up:
userid
password
mailbox
mail server
login domain
I want to automate this login process, by passing in all the required information.
The configuration page allows the passing of:
userid
password
mailbox
login domain
It doesn't allow the passing of the mail server. I also don't know how to pass the password (it's the same as the one they logged into the portal with) - it's not held in any user attribute is it?
So - is there any way to pass the mail server in? (which to us is actually more important than anything else - we have a lot of mail servers, and users aren't told which one they're on). And is there a way to pass the password? Or will users always be required to enter this themselves?
Cheers

well... I haven't played w/ the IMAP / Exchange portlets, but you could try a few things
1) turn off the preferences / user admin settings page (if the settings are currently exposed that way). That will prevent people from setting / changing them
2) if they're stored as user settings / user info you could use a PEI to check that and then set / prompt accordingly
3) I don't know if it's possible to have a PEI set settings for a portlet, but... if you could and these are user::portlet settings then you could do something ala (2)
I'm not sure (3) is possible (I'm sure there's some way to do it) and I don't know what kinds of settings the portlets use, so YMMV.

How can i publish owa on exchange 2013 without ssl?

hi
i need connect to owa on exchange 2013 without ssl.
but when i change config from https to http. my iis return internal error.
can anybody tell me switch from https to https step by step on exchange 2013?
regards

Check out http://technet.microsoft.com/en-us/library/dn635115(v=exchg.150).aspx#OWA
Bharat Suneja
Exchangepedia.com | bsuneja
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email directly to this alias. This alias is for newsgroup purposes only.

Exchange Portlet and SSL

Similar Messages

Maybe you are looking for