Exchange Powershell issue while loading the snapin on command prompt, in Exchange server 2010.

Hi,
When we launch the Exchange powershell via command prompt.. with below command:
PowerShell.exe -PSConsoleFile "D:\Program Files\Microsoft\Exchange Server\V14\Bin\ExShell.psc1"
it throws the following error:-
Following errors occured when loading the console
D:\Program Files\Microsoft\Exchange Server\V14\Bin\ExShell.psc1:
can not load windows powershell snap-in microsoft.exchange.management.powershell.e2010 because of the following error:
no snap-ins have been registered for windows powershell version 2
We are using Exchange server 2010 SP3 rollup 5 and EXCHANGE Server 2010 SP01.We see the issue on both the servers
Can you please provide the steps to reslove the issue.
Thanks & Regards,
Sanjeev Gupta

I have got the resolution of the problem. In my environment, the Powershell.exe which was being launched from command prompt, was 32 bit exe, while it was needed 64 bit exe.
It was occuring because in system path there was 32 bit powershell.exe was present. So, after replacing the exe with 64 bit exe, the problem was solved.
Thanks for the help provided above..
Regards,
Sanjeev

Similar Messages

Issue while loading the library files(".so" or ".sl") using JNI

Hi,
We are loading the c library files using system.load during the init phase of servlet.
While loading the application for the first time everything goes smooth and application behaves as expected.
We are facing the below issue when we try restarting the application through admin console in case of WAS (web sphere) for any patch deployment in the application.
java.lang.UnsatisfiedLinkError: Native Library /users/test1/siva/jnilib.so already loaded in another classloader.
If we restart the complete WAS every thing works fine.
There is no specific System.unload function available in java to remove the loaded library in JVM.
Is there any alternate way to unload the library which is loaded in class loader to resolve this issue which can be called in the destroy phase of servlet?
Any help here is highly apreciated.
TIA,
Siva.

sivabalan wrote:
Hi,
We are loading the c library files using system.load during the init phase of servlet.
You mean a shared library, not C files (which would be source.)
However I am not sure that loading it in a servlet is a good idea. But that is a different issue.
Is there any alternate way to unload the library which is loaded in class loader to resolve this issue which can be called in the destroy phase of servlet?This is how it works on the Sun VM back to about 1.2. And as far as I know there is no other way for it to work on any other VM.
You have a class with native methods that relies on the shared library. The class and the shared library are loaded into a class loader. If the class loader is unloaded by the GC then the native library will be unloaded as well.
A class loader can be collected by the GC if if the classes loaded by it are no longer actively references. So ALL class instances can be collected.
If the above is true then by running System.gc() twice it will collect the classloader and thus the native library.
So in your situation it might work if your app server allows you do GC (full GC is better if that is an option). You could try unloading the app, then doing the GC option several times, then do a load. Try the GC option about 6 times and the reduce it down to see if 2 work.
If that doesn't work then there could be some programmatic solutions using the same idiom.

Issues while loading the Menu in Infoview for Performance Manager

Hi,
I have been seeing intermittent issues with the menu getting loaded when I click on the Performance Manager tab in Java Infoview. I am working on BOXI R2 SP2.8 on Windows 2003 Server with Oracle 10g as our Database. I have been working with BO tech Support to find out the resolution but so far they have been unsuccessfull in finding the root cause of the issue.
I have tried enabling the logs (Performance Manager) I have checked on the Tomcat Logs (Application Server) and have tried to check the AF_Verbose logs which atually pointed to errors with web.xml however there is no other error pertaining to it. The issue comes up intermittently and sometimes the menu does load successfully but most of the times it is not able to load the Menu for Corporate dashboard.
Any input on this would be very helpfull.

First Change your Flat file Order like this
EMPID CID QTY UNIT PRICE REVENUE
Create datasource also like this same manner.

Idoc issue while loading the data into BI

Hello Gurus,
Initially i am having the Source System connection problem. After it was fixed by the basis i had followed the below process.
I am loading the data using the Generic extractor specifying the selection and its a full load. When i load the data from R3 PP application i found the below result in the monitor screen of BW.
1. Job was completed in the R3 system and 1 million records are fetched by extractor.
2. the records are not posted to the BW side Because of TRFC issue.
3. i got the idoc number and process it in the BD87 tCode. But it was not process sucessfully it gives the following error " Error when saving BOM. Please see the application log."
4. when i check the Application Log using the Tcode SLG1 with the help of time and date of that particular process it was in the yelow status.
Kindly let me know i can i resolve this issue. i have already tried by repeating the infopackage job still i am facing the same issue. I have also check the connection its is ok.
Regards

hello veerendra,
Thanks for your quick response. yes i am able to process it manually. after processing it was ended with the status 51 application not posted.
could you pls help me out with the same
regard
Edited by: KK on Nov 4, 2009 2:19 AM
Edited by: KK on Nov 4, 2009 2:28 AM

System Error 998 While loading the Labview Run-Time Engine

Hello.
I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
"System error 998 while loading the Labview Run-Time Engin(c:\program
files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
Engine. Please contact the vendor of READVOLTAGE to correct this
problem"
READVOLTAGE is my function inside the dll. The runtime is already
installed. I tried it in another WINXP running machine and works fine.

This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
I get error 998 when calling a LabVIEW buildt DLL from MSVC++
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading the data

Hi,
We are trying to copy data from one cube to another(it's exact copy). There are more than 11 million records so we have used calendar month as filter and divided the data in to many parts.
While loading the first request to the target cube, it failed resulting in a short dump. I checked in ST22 and it showed "Runtime Errors DBIF_RSQL_SQL_ERROR , Exception CX_SY_OPEN_SQL_DB" and I also found a message "ORA-00060: deadlock detected while waiting for resource" in the description of the Short Dump.
I found many threads here relevant to this exact issue but the only solution that I could find is to include a delete index and create index process in the chain before and after the data load process to the target cube. In our case, the target cube has no data and this would be the first request to the cube so there is no need to delete index in the first place but still the data load is failing.
For each load there are 50 data packages and 50k records for each packages. Only one or two packages have failed. Is there any way to recover only these two separatly instead of deleting the whole request and repeating the process.
If you have encountered a similar issue or if you have any suggestions, Please do help.
Thanks..

Hi,
Can you see which data packages have RED status? Click on the live of the RED data package, and you have to find an ICON with update manually, or go to MENU -> REQUEST -> POST MANUALLY.
if you are lucky, it helps. Do not forget that this runs in DIALOG process, so don't leave BREAK.POINT in your transformation.
If you need any help, please let me know.
(The DEADLOCK problem: change the DTP BATCH setting, because it has problem with paralel loading, and there os a database deadlock. I suggest you to load in one process so: open DTP. after it, go to GOTO menu -> SETTINGS FOR BATCH MANAGER -> NUMBER OF PROCESSES, overwrite with 1. With that, deadlock may not occur.)
Regards,
Laszlo

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Unknown issue while loading .dbf file by sql loader

Hi guys,
I am having a unknown issue while loading .dbf file by sql loader.
I need to load .dbf data into oracle table.for this I converted .dbf file by just changing its extension as .csv . file structure after changing .dbf to .csv --
C_N_NUMBER,COMP_CODE,CPT_CODE,C_N_AMT,CM_NUMBER
1810/4,LKM,30,45,683196
1810/5,LKM,30,45,683197
1810/6,LKM,30,45,683198
1810/7,LKM,30,135,683200
1810/8,LKM,30,90,683201
1810/9,LKM,1,45,683246
1810/9,LKM,2,90,683246
1810/10,LKF,1,90,683286
2810/13,LKJ,1,50.5,680313
2810/14,LKJ,1,50,680316
1910/1,LKQ,1,90,680344
3910/2,LKF,1,238.12,680368
3910/3,LKF,1,45,680382
3910/4,LKF,1,45,680395
7910/5,LKS,1,45,680397
7910/6,LKS,1,90,680400
7910/7,LKS,1,45,680401
7910/8,LKS,1,238.12,680414
7910/9,LKS,1,193.12,680415
7910/10,LKS,1,45,680490
then I am loading it by sql loader.but I am getting always error below ...
Record 1: Rejected - Error on table C_N_DETL_TAB, column CPT_CODE.
ORA-01438: value larger than specified precision allowed for this column
Record 2: Rejected - Error on table C_N_DETL_TAB, column CPT_CODE.
ORA-01438: value larger than specified precision allowed for this column
table structure-
create table C_N_DETL_tab
"C_N_NUMBER" VARCHAR2(13),
"COMP_CODE" VARCHAR2(3),
"CPT_CODE" NUMBER(4),
"C_N_AMT" NUMBER(20,18),
"CM_NUMBER" NUMBER(7)
control file-
options(skip=1)
load data
infile '/softdump/pc/C_N_DETL.csv'
badfile '/softdump/pc/C_N_DETL.bad'
discardfile '/softdump/pc/C_N_DETL.dsc'
into table C_N_DETL_tab
truncate
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
C_N_NUMBER CHAR,
COMP_CODE CHAR,
CPT_CODE INTEGER,
C_N_AMT INTEGER,
CM_NUMBER INTEGER
but guys when I am increasing size of all columns of tabel upto its max value then data is loaded but when I am checking column max length after data loaded then its very less..
changed table structure-
create table C_N_DETL_tab
"C_N_NUMBER" VARCHAR2(130),
"COMP_CODE" VARCHAR2(30),
"CPT_CODE" NUMBER(32), ---- max value of number
"C_N_AMT" NUMBER(32,18), ---- max value of number
"CM_NUMBER" NUMBER(32) ---- max value of number
now i ma running ...
sqlldr express/express control=C_N_DETL.ctl log=C_N_DETL.log
o/p-
Table C_N_DETL_TAB, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
---------- ---- ---- C_N_NUMBER FIRST * , O(") CHARACTER
COMP_CODE NEXT * , O(") CHARACTER
CPT_CODE NEXT 4 INTEGER
C_N_AMT NEXT 4 INTEGER
CM_NUMBER NEXT 4 INTEGER
Table C_N_DETL_TAB:
20 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
select max(length( CPT_CODE))from C_N_DETL_tab ---> 9
can u tell me why I need to increase size of table columns upto max value?although length of data is soo much less.
kindly check it..thnx in advance...
rgds,
pc

No database version of course. Unimportant.
If I recall correctly, it is 'integer external ' and you would best double quoting the alphanumerics (which you didn't ).
Try changing integer in integer external in the ctl file.
Sybrand Bakker
Senior Oracle DBA

D4O-1009 An error occurred while loading the worksheet

hye everbody
i create a worksheet in discoverer plus olap but i get the error *"D4O-1009 An error occurred while loading the worksheet"..*
even i uninstall the catalog and install the catalog..
when i create the worksheet and saved..of i exit..and try to open back...it show this error..
this is the diagnosis for the connection...
<D4OCheckConfig version="1.0.0.0">
<Check key="JDK version" value="1.6.0_16"/>
<Check key="BI Beans internal version" value="3.2.2.0.24"/>
<Check key="Discoverer Plus OLAP version" value="10.1.2.07.75"/>
<Check key="Discoverer version" value="10.1.2.48.18"/>
<Check key="port" value="-1"/>
<Check key="Connect to database" value="Successful"/>
<Check key="JDBC driver version" value="10.1.0.3.0"/>
<Check key="JDBC JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Database version" value="10.2.0.1.0"/>
<Check key="OLAP API Server version" value="10.2.0.1.0"/>
<Check key="OLAP AW Engine version" value="10.2.0.1.0"/>
<Check key="OLAP Catalog version" value="10.2.0.1.0"/>
<Check key="BI Beans Catalog version" value="3.2.2.0.24"/>
<Check key="Discoverer Catalog version" value="10.1.2.07.75"/>
<Check key="Authorized for Discoverer Plus OLAP catalog" value="Yes"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Load OLAP API metadata" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="19"/>
<Check key="Number of metadata dimensions" value="17"/>
this is the error when i save the error in a notepad...
oracle.dss.d4o.common.D4ORuntimeException: D4O-1009 An error occurred while loading the worksheet.
oracle.dss.bicontext.BINamingException: BIB-14099 Unknown naming exception.
oracle.dss.bicontext.BINamingException: BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.QueryServer; exception null.
i not have any clue...why this thing occur..
any idea why this thing occur...
thanks in advance....
regards,
rao..

Hi Rao
Please don't keep creating new postings for the same issue as it is hard to keep answering multiple posts about the same thing.
If you have done all of the things suggested by Keith in my previous reply, which as I say is what I would have done, then you really ought to raise this as a service request to Oracle.
I'm advising this because the particular error you are encountering does not come up in my database of fixes neither could I find any reference to it in either the OTN or MetaLink forums. This needs to be brought to Oracle's attention.
Best wishes
Michael

There was an error while loading the message. Please try again later. get this when trying to open emails

from today only when i try to open my emails i get the following message
There was an error while loading the message. Please try again later.
I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please help

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Special character issue while loading data from SAP HR through VDS

Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
Thanks

We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards.

Issue while loading berkeley database

Hi,
I have an issue while loading data into the Berkeley Database. When I load the xml files into Berkeley database, some files are being created. the files are named something like db.001,db.002,log.00000001 etc. I have a server running which tries to access the files .When I try to reload the Berkeley db while my server is running, I am unable to load the Berkeley database. I have to stop the server, load the berkeley DB and restart the server again . Is there any way in which I can reload the database without having to restart the server. Your response would be of help to me to find a solution to this issue. I am currently using Berkeley Database version 2.2.13
Thanks,
Priyadarshini
Message was edited by: Priyadarshini
user569257

Hi Priyadarshini,
The db.001 and db.002 are the environment's region files and the log.00000001 is one of the environment's transactional logs. The region files are created when you use an environment, and their size and number depend on the subsystems that you configure on your environment (memory pool, logging, transactions, locking). The log files reflect the modifications that you perform on your environment's database(s), and they are used along with the transaction subsystem to provide recoverability, ACID capabilities and protect against application or system failures.
Is there a reason why that server tries to access these files ? The server process that runs while you load your database should not interfere with those files as they are used by Berkeley DB.
Regards,
Andrei

Exchange Powershell issue while loading the snapin on command prompt, in Exchange server 2010.

Similar Messages

Maybe you are looking for