Exchange Public CA cert is disappearing after it completes installation

Hi,
I am attempting to add a public wildcard certificate on our exchange server and each time that I complete a pending request the job completes and as soon as I click finish the certificate disappears.
Any attempts to re-add via the shell tell me that the certificate already exists, but the certificate does not show in the EMC.
I am attempting to add this to an Exchange 2010 SP1 rollup 4 server.
Any help would be appreciated as it is driving me a little nuts.
Thanks
Mike

If you do a Get-ExchangeCertificate from PowerShell can you see it? Does it show up in the Certificate Store of the server?
Program Manager, Exchange Customer Advisory Team
MCSA 2000/2003
MCTS: Win Server 2008 AD, Configuration MCTS: Win Server 2008 Network Infrastructure, Configuration
MCITP: Enterprise Messaging Administrator 2010
Former Microsoft MVP, Exchange Server
NOTICE: My posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Satellite A350D - WLAN card disappeared after Windows 7 installation

Hi folks.
This is my first post on this forum, and it's not for a good reason.
I have installed a brand new copy of Windows 7 32 bit, and after installing it, i have gone to Toshiba website and download the drivers for this version of SO. Everything looks great, except that the wireless LAN card drive don't works now. On the device manager nothing appears available. I don't have any error on Windows System Information.
What is the problem? The wireless switch is on!! FN + F8 don't work. Help me!!
[*Device Manager:*|http://img295.imageshack.us/img295/4649/systeminformation.jpg]
[*System Information:*|http://img218.imageshack.us/img218/6196/devicemanager.jpg]

Hi,
Have you installed the Wlan driver?
http://aps2.toshiba-tro.de/wlan/?page=downloads
Download and install the driver for your model, while installing the driver enable the Wlan switch (if available) or pressing FN+F8

Creative Cloud App installer disappears after "Initialising Installer" stage

I recently had to reboot my laptop to its settings for 4 days ago, and ever since then I cannot seem to download CC app at all.
I don't even get an error message, the installer just disappears after the Initialising Installer stage.
I have tried using the uninstaller tool, but when I try to reinstall the same thing happens.
This is very frustrating. I did not expect to have to pay for the CS6 products and to not be able to download the software itself.
I pay monthly for this service and the more days I go unable to download the software seems frankly a waste of my money.
Your help would be much appreciated.
Thank you.

For Windows :
Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Important :
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
Then try to install Creative Cloud desktop application.

Exchange email appears then disappears after one read !!

Since installing OS 3.0 on my iPhone 3G my Exchange email appears then disappears after 1 reading.
To get the emails back I go to the account settings and switch the Mail off (which removes the account and the folder format) then I switch the mail back on then the email are back again !!
(if it can get through to the server, as I often get a Sever error message)
Anybody else seen this problem?
I don't use the Contacts or Calenders as currently through iTunes sync they seem OK.
Note my Yahoo and other POP accounts have no problems.
cheers

Problem Solved- Atleast for me
After going through this issue for more than 3 weeks, I was able to find the solution. For me emails continue to disappear but it was totally random. Calendar and Contact also disappeared but not as often as mail.
The problem resides on Exchange OWA server. On IIS I have connection limit of 10 connections which we was causing this problem. After increasing the limit problem is gone.
STEPS
Search the logs under C:\WINDOWS\system32\LogFiles\HTTPERR for "503 1 ConnLimit", if you find this line then the solution is to increase the limit.
To do that, go to, IIS Manager, Right click on Default Website (where OWA is hosted), properties and go to Performance tab. Under Website Connections, increase your current limit. Restart IIS Admin and try IPhone mail again.

My Hotmail inbox on my iPad2 disappears after 3 days. Also, although my folders are there, there are no emails in the folders. How do I fix this?

All the emails in my Hotmail inbox on my iPad2 disappear after 3 days. Also, although my folders are listed on the iPad, there are no emails in the folders. How do I fix this? All the emails appear on my computer.

You can sync Hotmail via Microsoft Exchange. It will mirror your email account on your phone so that the account will look just like the one on your computer. Here are the instructions:
http://www.idownloadblog.com/2010/08/30/hotmail-iphone/

My iPad contacts disappeared after adding a contact

My IPad 2 contacts just disappeared after adding a contact. What will I do aside from syncing? Are there any other solutions?

Upon purchase of my iPad 2 I began saving contacts to my IPad Contacts application that is already set up upon purchase of iPad 2.   I then learnt about synching ( push ) my Gmail contacts to the Ipad 2 contacts 'exchange'.   I did this happily and was very pleased with the results however when synching the first time I chose not to delete my iPad 2 contacts I had began saving upon purchase.   This meant upon opening 'contacts' I had three choices 'iPad contacts', 'Exchange contacts' or 'All contacts'.   There is no way to save ipad contacts directly to the 'Exchange contacts' it has to be saved into a file or vcard and then imported in using e-mail or a PC.
A few days in to using push/exchange I also added calendar and notes to the push/exchange as I was happy with the contacts and e-mail.   I did notice some glitches since doing using push/exchange although I think it began when initially I began pushing contacts/mail there may be a slight chance that it began when I turned on calendar and notes facility to the push/exchange. The glitches that began meant sudden blinking during or after saving in calendar, contacts and notes.   Sometimes this would mean the item added was there but also sometimes it would mean that it was not.   Also double entries began arriving on both m iPad and in my Gmail Contacts online.   These were a mix of contacts that I had and had not not created or edited since acquiring my iPad 2 so the was no pattern or obvious reason.   They were all also a mix of contacts from different groups saved in my Gmail contacts.
Today suddenly whilst adding a contact the contacts blinked shut again.   I re-opened to see what had happened wondering if my contact had been saved or not however not only did what I add not get saved but all approx 500 contacts from both my iPad contacts and my Exchange Contacts vanished from my iPad 2.   I opened and closed the contacts to see if they would return but there was nothing.   I also hibernated and then later shut down and restarted the iPad many times to no avail.   I checked my Gmail Contacts account and thankfully all my contacts were still there.   However, it was still extremely frustrating to have everything vanish from my iPad and then not just come back from there especially as he e-mails and calendar seemed to be still working fine with Exhange/push.   Also, why had the contacts saved to the IPad contacts directly vanished also ?!!   For a £800 gadget not including accessories it really is unacceptable !!!
Finally what worked for me was going to 'Settings', then going to 'mail,contacts,calendars' and then selecting the 'exchange' account and then switching 'contacts' to 'off', then I selected 'delete' iPad contacts i.e delete the contacts saved in the iPad contacts group however with nothing there to lose this time and having a feeling that perhaps that may have contributed to the issues/glitches and this contacts vanishing I clicked on the 'delete'.   I really do have a feeling that perhaps the issues may have been due to having two sets of contacts even though there were only a few there in the iPad before they vanished along with the Exchange contacts.   I clicked 'done' and then I didn't hibernate the iPad 2 instead I shut it completely down.
Upon restarting my iPad 2 I went to see if the contacts had returned but unfortunately once again they had not.   I returned to 'settings', then 'mail,contacts,calendars' and then selected 'exchange' from accounts and switched 'contacts' back on i.e enabled this once again and clicked done.   I then once again switched off ( shut down ) my iPad 2 and waited a while.   Upon restarting I again went back to contacts and found some of my contacts finally arrive but not all.   My 'push/'fetch' for exchange is set to every 15 minutes and every push/fetch showed me more and more contacts until finally I had all but one which has still not showed up !   However, I am once again happy and this time I only have one contacts group I.e for exchange and no separate iPad contacts to confuse me or iPad.   I don't know if this will mean all will be okay now as I do feel like perhaps I cannot now trust iPad contacts and maybe need to print out everything and keep this on me also just in case. I'll keep you posted !

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

DNS Host(A) records disappear after a while

Hi all,
a few weeks ago we started to change the TCP/IP configuration of our printers from "static" to DHCP with reservations. The DHCP server is configured to register forward Host(A) and reverse PTR record on DNS on behalf of (all) clients, both are W2K3 with SP2.
This works well for all our Toshiba printers/copiers and most of our HP printers. However, on a handful of HP printers the Host(A) record in the DNS zone get lost / disappeard after some time, leading into a non working name resolution. But only the Host(A) record, the reverse PTR record is still there. Currently we have this issue with Business InkJet 2800 attached via a JetDirect J3258G to our network.
In the past we noticed, that on another printer the Host(A) record re-appears after some hours, only to disappear after a while again. These intervals last some hours up to one day, but seem to follow no period or schedule, like DHCP lease time, DNS scavening etc.
I have intentionally not "listed" all the technical details in this first post. However, if you need specific details I will be happy to share them.
Any hint or comment is appreciated
regards

This is by design.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/afd3c338-1706-4898-b269-550c018073c0/dns-entry-for-dc-not-dynamically-updating-server-2008-r2?forum=winserverDS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ed97a286-d884-43d6-87e2-5cd5e59cfe9a/windows-2008-r2-domain-controllers-and-static-dns-entries?forum=winserverNIS
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

External hard-drive disappeared after dragging into Spotlight

Dear users,
My external hard-drive under devices disappeared after I dragged it into Spotlight to reindex it to make it searchable.
There was a cloud puff animation when i dragged it from the devices icon on the left of folders to the spotlight privacy box window.
Please help. Thank you!

Hi there,
did you find out what the problem was or how to re-map the ext. HDD?
I have the same problem.
thank you.

Release Tab in purchase order disappear after release using ME29n

Hi there,
We are busy testing support stacks (upgrading from ECC6 SAP_APPL SAPKH60305 to SAPKH60307)and we've come accross a strange problem. When we create a normal purchase order (ME21n) the purchase order does pick up a release strategy. Using the older ME28 transaction to release this purchase order, everything is fine. We can use ME28 to release the purchase order, as well as unreleasing the purchase order, as often as we want (the same purchase order). When we use transaction ME29n the release tab in the purchase order just simply disappears after saving. In the purchase order header changes, the release change is visible, but the release tab is missing. This purchase order is now not subject for release, and a goods receipt is possible without release. I checked in table EKKO as well and the release fields in this table for this purchase order is empty.
Has anybody had a similar experience? Any advise would be greatly appreciated.
Regards
Christo Vermeulen

Hi Christo Vermeulen,
I have detected the same problem as reported by you. Did you solve it? Do you know how can I procedure to solve it?
Thanks in advanced,
Eder Nicoleti

Why ilife disappear after reinstalling mountain lion?

why ilife disappear after reinstalling mountain lion?

The 10.8.3 update should have left your iLife apps intact - did you do a clean install, erasing your drive? If so, then you should be able to go to the Mac App Store and download the iLife apps using the Apple ID with which you registered your computer.
Clinton

My ipod shuffle disappears after I click on the icon in Itunes. I reinstalled Itunes and my computer has been updated. What else can I do?

My ipod shuffle disappears after I click on the icon in Itunes. I reinstalled Itunes and my computer has been updated. What else can I do?

The shuffle icon in iTunes disappears, after you click on the icon in iTunes? If so, if you do not click on the shuffle icon in iTunes, does it remain there indefinitely? Are you looking at the shuffle icon in the iTunes sidebar?

I upgraded to 10.5.1 and all my music disappeared after syncing. How do I get it back?

i upgraded iTunes to 10.5.1 and all my music disappeared after syncing. How do I get it back?

I lost all my music, too - except for 3 pieces!? And I just upgraded, didn't choose sync'ing :-(((
Sure would like to get back my music, videos and playlists!
Most of it was my personal compositions/recordings, not bought at the iTunes store.
(This Mac has OSX 10.5.8)

Make an image appear and disappear after x time

If I have a button on my screen that I want to make a box appear when clicked, how would I go about doing that? It also needs to disappear after 10 seconds. I am not sure if this is an issue, but it needs to appear on the screen while everything else is happening underneath it. So the rest of the animation must continue on as this appears above it.
Thanks in advance.

yourbutton.addEventListener(MouseEvent.CLICK,btnF);
function btnF(e:MouseEvent){
vizF(yourbox,true);
setTimeout(vizF,10000,yourbox,false);
function vizF(dobj:DisplayObject,b:Boolean){
dobj.visible=b;

Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

Welcome to the WD Community.
1) I assume I can just hook the unit up via USB to my Mac and use iPartiion to reformat the drives, assuming each of the 4T drives will be seen by iPartition as a separate drive. That much seems straighforward.
Yes, and in case you ipartition dont see the unit properly, you can use the disk utilities on your Mac and you will be able to reformat the unit to make it compatible with your system.
2) Is my next step to reinstall the WD software and how do I do that? I've downloaded the Drive Utilities and Securities install apps - I assume I just run these with the drive still connected and that's all I need to do?
Yes, just run the applications.
3) What about the firmware update for Mac - when should I run that??
Normally, firmware updates are released to fix any issues that you might encounter on the drive. the latest one was released on 9/24/2014 and it fixed an issue with the drive dropping off of the list after system wakes up from standby mode.
5) And what about the "My Book Live Duo Setup" app for Mac - is that for a completely different model? What's the difference between "My Book Live Duo" and "My Book Duo"? It's these little things that I find so confusing.
Those are different units. The MBL Duo is a NAS (Network attached system) and the My Book Duo is a DAS (Direct attached system)
6) Lastly, when I have all the software installed, is that when I follow the procedure described in the Knowledge Base article ID 5724, "How to install a My Book Live or My Book Live Duo on Windows (8, 7, Vista, or XP) or Mac OSX for the first time"? Or is that procedure only for "My Book Live Duo" but not for "My Book Duo"??
That procedure is for the network units, not for your drive.

Exchange Public CA cert is disappearing after it completes installation

Similar Messages

Maybe you are looking for