Exchange rate coefficient on the basis of latest posting date in invoice.

Hi,
I have one query on posting date(picking of exchange rate coefficient from TCURR table) in invoice verification. Please help.
Conditions are--
vender and company code are not in same currencies(ex-USD and INR). exchange currencies are maintained perfectly on every month 1st ie co-efficients in TCURR table ie OB08
Query---
1.At the time of parking invoice suppose i enter the date 20th august and i have posted that invoice as parking. It is converting the local currency as per 8th month exchange rate.
2.And at the time of final posting the invoice supose i posted that date as 10th September. Business wanted that converting the local currency as per 9th month exchange rate But now local currency is converting on the basis of initial entry of posting date ie 8th month only.
Please advise and guide what configeration that i have to set for picking the exchange rate coefficient on the basis of latest posting date in invoice verification.
Thanks & Regards,
MadhuBabu.

Hi
I dont think it is possible as once you enter posting date while in parking invoice screen, on that date exchange rate will be calculated and it wil not be different at time of posting invoice. Instead of parking, you have to directly post with current posting period.
Thanks

Similar Messages

Restriction of Good Receipt on the basis of Latest GR Date...

How we can restrict the Goods Receipt against the Purcahse Order with reference to the Latest GR Date in reflecting in the Purcahse Order.
Latest GR date reflects in the Delivery tab of the Item details in the Purcahse Order.

Hi,
To prevent goods from being accepted in the case of delayed delivery, youmust specify the latest possible goods receipt date for the item in the purchase order. This field is in the item detail data on the Delivery tab page. You also have to set
message 163, Last possible delivery date was... (work area M7), as a warning or error message in Customizing.
If you have set the message as an error message for delayed delivery, you can post the delivered goods to the GR blocked stock and then post a return delivery from the GR blocked stock.
Hope Help U !
Regards,
Pardeep malik

MIR7 exchange rate is not modefied with respect to posting date

Hi Experts,
In our SAP system , we use MIR7 to create park invoice at first ,and then use MIR4 to change the parked invoice and post it.
but when creating parked invoice, it's in say June and the exchange rate is 100, and when we create real invoice from parked invoice, it's October and exchange rate turns to 115.
Then I change the posting date in the invoice from June to Ocetober, but the exchange rate is still 100 it is not changing according to the new posting date. How can I solve this problem, please give me a solution a.s.a.p.
Thanks in advance for your help.
Regards
Sunil

Hi Pankaj,
There are so many options e.g you can check in oinm select that particular item sort on docdate and check inqty and compare with your goods issue date if it is same then send same transaction to approval if you want.
Thanks
Sachin

Exchange rate diff at the time of GR

Hi All,
l have an issue which is, when l fix the exchange rate in my PO, at the point of goods receipt, differences are generated. that is,
at date 01.02.09, exchange rate on PO is fixed.
at date 11.02.09, goods receipt is done and when the accounting document is checked
it post a difference between the fixed PO rate and what's maintained on the exchange rate table
to the forex account. So l get this:
Dr Stock account
Dr Price diff account
Cr GI/IR account
Cr Forex account
Note: that IV is not yet carried out here at all. Price control is moving average.
My understanding is that differences arise between the time of GR and IV, if PO is not fixed.
Regards

Hi
If you fix the exchange rate indicator in purchase order, and doing GR (different exchange rate has been maintianed in OB08), then you inventory will be valuated at PO exchange rate. Difference will go to gain/loss on exchange rate (foreign currency exchange rate account). Same will be negated by price difference account.
You have one more setting for IV exchange rate in MM - LIV - incoming invoice - how exchange rate difference are treated. Here you maintain the settings for GR and IR exchange rate differences.
Checking the exchange rate fix in PO has nothing to do with GR and IR rate differences as through out the process the rate is constant.
Thanks

Exchange rate diff. influencing the available cost of WBS-element

Hi all,
here is a intricate problem I need help to solve. I am not so very experienced withon CO/PS, my main competence is within PM. This issue involves PM/MM/PS and CO so I am not sure if this is the correct group to post to, but I give it a try..
In PM (Plant Maintenance) workorders the u201DPlanned Costu201D is calculated. Exchange rate type for the u201DPlanned costu201D is picked from the CO Cost Version u201D0u201D that uses exchange rate type u201DPu201D. This is a exchange rate type that have one yearly fixed exchange rate. The actual costs are posted with exchange rate type M, which is daily updated.
The Planned cost in the workorder is a part of the u201DAssigned Costu201D that are influencing the available budget on the WBS-element. u201DRemaining/Residual order planu201D.
In cases where the PRQ/PO are created in other currency than the Company code currency we have a problem:
The difference in exchange rate are causing the u201DAvailable budgetu201D to be too low u2013 and the only workaround I have found is to decrease the planned cost in the WO to release the available cost for the Budget. (make the available cost higher )
Does anyone have an idea how to solve this?
- I have thought of setting the exchange rate type for the planned cost to be the same as for the actual costs u2013 but it is not recommended to change the exchange rate type in CO for cost version u201D0u201D and not a good ide to change the exchange rate type for actual cost eather. This will also not solve the problem of exchange rate difference caused by PRQ/PO beeing created for a whole year for varying exchange rates.
- Is there a way to exclude the u201D Remaining/Residual order planu201D from the u201DAssigned Costu201D? And what consequences will this have? Only cost from PRQ/PO will appear? (Since internal material (reservations) and internal hours not triggers a PRQ/PO)? I see there is a transaction CJE5 where you can exclude the u201D Remaining/Residual order planu201D from the u201DAssigned costu201D u2013 but I think this will only exclude it from beeing shown in the report S_ALR_87013558?- not from the calculation of available cost at the WBS-element? which is what I need. (see Note 668240)
-Is there any u201DExchange rate differenceu201D setting in the customizing u2013 how exchange rate difference are treated for PM orders? And will this help my problem?
Best regards
Ellen

Hi ,
try this way...
Go to T-code>CJE0>Enter CO Area-->and execute the report 12KST1A ->in the selection screen -->
go to menu -->system -->status check the program name and ...copy
next go to se38 and copy yhe above program name and execute and use submit report with selections,,,,
Prabhudsa

Wanted to change the Exchange rate while saving the PO

Hi,
I have a requirement that i have to change the value of Exchange rate while saving the PO.
Even i checked with more BADI's. but i am not able to update the new value.
Can you tell me any specific user exits available for this.
Thanks in Advance,
Best Regards,
Prabu

Solved

OBA1 exchange rate maintenance for the new accounts

Dear All,
The following three bank G/L accounts 1833280, 1833285 and 1833288 have been created in India Charts of accounts IN01 and extended to company AE10.
The G/L accounts can now be used in AE10.
Now tell me how can I make OBA1 exchange rate maintenance for the new accounts.
Please share your valuable opinions with me.
Thanks a lot in advance!!

Hi,
The relevant transaction in OBA1 for the bank accounts is KDF.
Double click on KDF, a new screen will open up, where you do the following:
You enter the bank GL account here. If the account is to be differently handled at the level of the currency and currency type then you can further limit the exchange rate difference based on these 2 parameters.
Once you have entered the bank GL, save and then double click the bank GL account. A new screen will open up where you define accounts for the following:
The accounts below will carry the forex gain loss that you when you clear foreign currency transactions.
1. Exchange Rate difference realised:
Loss                 XXXXXX
Gain                 YYYYY
The accounts below will carry the difference while valuating you open items for
2. Valuation:
Val.loss 1           XXXXXX
Val.gain 1           YYYYY
Bal.sheet adj.1      ZZZZZZ
The accounts below will carry transaltion losses.
3. Translation
Loss
Bal.sheet adj.loss
Gain
Bal.sheet adj.gain
Cheers...

Exchange rate should pick from TCURR based on custom date field added in MIGO

Hi,
In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on translation date instead of posting date. We have tried this logic using substitution (GGB1) in FI accounting it is working fine in FB60 & F-02 transaction but it is not working with MIGO transaction. Please suggest some solution for this.
Thanks & Regards
Vinoth Kumar.M

Hi Maniraj,
This will a modification to existing system and it is not supported directly.
There are 2 notes of SAP for modification of translation date of BKPF.
SAP Note 574583 will activate a BADI kindly refer to it for details.
http://www.stechno.net/sap-notes.html?view=sapnote&id=574583
There is another one but is appilcable if material ledger is active in the system
Regards

What is setting for the depreciation calculate on the basis of assets value date

Hi ,
My client requirement to calculate the assets depreciation on the basis of assets value date,
every assets transaction will have take base assets value date
Acquision 1 Assets value date 1.4.2014
transfer Assets value date 15.3.2014
Wbs settlement Assets value date 20 .3.2014
second acquisition Assets value date 28.03.2014
if anybody know about the setting ,Please provide me important setting ,

Any setting related to assets posting variant ? to calculate if anybody know the setting please inform.

2LIS_04_P_ARBPL - figures are grouped according to latest posting date!!

We are trying to fill setup table for App 4 and afterwards when we extract the DS 2LIS_04_P_ARBPL we are getting figures clubbed together based on latest posting date
for ex: a given production order and type, if AFRU table shows below entries:
16.01.2012      1.5
17.01.2012      1.0
19.01.2012      0.2
then in setup table we have only one row (figures are grouped and shown against the latest posting date!!
19.01.2012    2.7
what is the solution?

Hi,
Most of the times data won't fill in the base tables, because the reason is, at the time of data entrry by users, there are certain conditions , so until and un less all that conditions fullfill, then only all feilds will fill in the base tables. I faced the same problem for 2lis_04_p_matnr datasource, I'm not getting Batch, so I enhaced teh datasource. So better add ZZ feild to datasource and enhace the ds based on AFUM table (Based on the process order)
Thanks
Reddy

Customers whose latest posting date is older than 2 years

How to find out the Latest posting date for a customer in the report from the list of Posting date available.
Sorting option may not be a right Option as i need to create a condition on the formula(Latest posting date(4) -Sy-datum(4) greater than 2 years)
Please suggest me

Please let me know for any inputs

Latest posting date from table MKPF

hi all,
I want to retrive the latest posting date from table MKPF. Here I am using the MARD,MSEG,MKPF tables to get the latest posting date.
if not it_mard[] is initial.
select amblnr amjahr amatnr awerks algort bbudat
into table it_mseg_mkpf
   from mseg as a mkpf as b
   on amblnr = bmblnr
and amjahr = bmjahr
for all entries in it_mard
where a~matnr = it_mard-matnr
and    a~werks = it_mard-werks
and   a~lgort   = it_mard-lgort.
if sy-subrc eq 0.
sort it_mseg_mkpg decending by matnr werks lgort budat.
endif.
loop at it_mard.
clear it_mkpf_mseg.
read table it_mseg_mkpf with key matnr = it_mard-matnr
                                                  werks = it_mard=werks
                                                  lgort    = it_mard-lgort
                                                  binary search.
     if sy-subrc eq 0.
     it_final-budat = it_mseg_mkpf-budat.
     endif.
endloop.
from the above code i need to rereive the latest posting date    , but when I am reading from internal table it is giving the sy-subrc is 4. i know when we use binary search , the standard table should be ascedning order. but here I need to use descedning order.
please hhelp i this.
regards,
Ajay

Hi,
1. Check Storage location (LGORT) value available in the internal
    table it_mseg_mkpf. Some case no value.
2. Remove the binary search after u try again. Like below.
loop at it_mard.
clear it_mkpf_mseg.
read table it_mseg_mkpf with key matnr = it_mard-matnr
                                                  werks = it_mard=werks
                                                   lgort = it_mard-lgort.
if sy-subrc eq 0.
it_final-budat = it_mseg_mkpf-budat.
endif.
endloop.
3. sort it_mseg_mkpg DESCENDING BY budat matnr werks lgort.
4. For all material (it_mard) may be or may not be there in the MSEG table.
    So for some case SY-SUBRC = 4 will give.
Thanks,
Durai.V
Edited by: Durai V on Sep 9, 2008 6:50 AM

Exchange rate basing on the duedate or document date

Hi Friends,
While doing postings, system is always taking due date as date for exchange rate conversion instead of baseline date/
Example :
Contract cashflow : 100USD - 01/09/2010 to 30/09/2010 - due date 01/09/2010 (exchange rate : 45.50 on 01/09/10)
100USD - 01/10/2010 to 31/10/2010 - due date 01/10/2010 (exchange rate: 45.00 on 01/10/10)
When i am doing RERAPP on 01/10/10 for september cashflow line item, system is taking exchange rate as 45.50 instead of 45.00. My query is what is the base date for exchange rate determination whether it is due date for a line item in a contract or posting date while doing RERAPP.
If anybody workks on this scenario, provide some idea.
Srini

Hi Srinivas,
let me know how you are taking currency translation rate, there are two possobilites
1. Rormula in condition record
2.Currency translation rule.
If 1. one u have to wirte a badi to pick up condition start data or calcution start date.
if 2. while creation of Currency transation rule, you have to select procedure as Calculation start data as translation date.
Regards
Jilani

Exchange rate problem at the time of MIRO

Dear all
Po is created for 21,00,000 EA qty with rate of 1 USD=44.22130 INR
GR done for QTY 7,00,000 EA qty and Invoiced received for 7,00,000 qty at the rate of 1usd=43.2 Inr, now if i m trying to invoice almost 80,00 usd we are paying more im tring to chnage in MIRO t.code in details tab Exchange rate but it was in Display (greyed) how can i change the exchange rate for this amount or how can i post the Invoice...
Please advice me.
Regards
venu gopal

Hi,
If you have not checked the indicator 'Exch Rate Fixed' indicator in PO header tab 'Delivery/Invoice', then you can change the exchage rate at MIRO.
For this, follow the steps below in their exact sequence.
1. go to MIRO
2. Enter the 'invoice date' in Basic data tab
3. Go to 'Details' tab in invoice header. Enter the desired exchage rate here.
Now proceed further and allocate the invoice to the desired PO or del note etc...
You will not be able to change the exchange rate once the invoice has been allocated.
rewards if helpful..

Exchange Rate problem at the time of sales Invoice

hi experts
Exchange rate type AR is made for Sales
at the time Sales Order amount is being picked from exchange rate type AR but at the time of Sales Invoice the amount is being picked from Standard Rate Type M at the header level but at the item level from AR only
Plz help in this regard
Sudhir Poddar
SAP FI Consultant

Hi Sudhir,
SAP will pick Exchange rate type M for translations by default and you cannot change it. So you have to change the exchange rate type for your invoice or maintain same rates for that day alone.
This is what is given in SAP documentation:
"For posting and clearing, the system uses the exchange rate type M (average rate). This exchange rate type must be entered in the system and you must also enter the exchange rates for this type."
For more info on exchange rate types read this:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/a6/004940f0030272e10000000a155106/frameset.htm
Regards,
Ravi

Exchange rate coefficient on the basis of latest posting date in invoice.

Similar Messages

Maybe you are looking for