Exchange rate difference while posting ME21N MIGO and MIRO

Hi All,
I am facing one problem with exchange rate type between M and EURX  and EURX is maintanined in the SPRO>SAP Netweaver>General Settings>currencies>Check Exchange rate types
EXRT :  EURX
Usage    :  EMU Reg,fixed                       
Ref.Curr    : EUR  
Buy.ra.at   
Sall .Rat.At    
Inv   
EMU   :X
FIXED
Scenario:
Company(USD) is maintaning Exchange rate type: M and no exchange rates are maintained for USD:EUR or EUR:USD.
Eur is maintaing in Exchange rate type EURX.
1) PO (ME21N) is posting for the Vendor on posting date 01/01/2008. Transaction currency is EUR and company code currency is USD and Quantity : 25000
--> Exchange rate 'M' is not maintained for EUR and values are picking from the EURX Type. In the PO, Exchange rate is picking correctly from the EURX table entries on 01/01/2008.
2) MIGO: GR  is posted on 01/25/2008 and with 15000 Quantity. Exchange rate is getting currecly from the table on 01/25/2008.
3) MIRO: IR is posted on 02/15/2008 and Vendor Account is picking correct exchange rate from the table but GR/IR account is caluculations EUR:USD is differntly .
Note: It is not GR based IR.
Ex:
PK AC                DESCRIPTION                    Tran Curr (EUR)    Local Curr  USD
31 5004789     Vendor Account                       24,718.48-            38,777.12- USD
86 2525000      A/P-GR/IR NON-INV                24,718.48            38,883.73  USD
91 6584785      SERV-OTHER O/S                    0.00                 106.61- USD
Here GR/IR account is cal dirrently.
4) Credit Memo posted against IR on 03/25/2008. Exchange rate is given while posting CM same as Invoice. But system rate is different. Here also how the GR/IR is calculating is question is it not taking from Table or from any other rate types . Same problem like IR for GR/IR account.
Entry is posted like
PK  ACC         Description                            Tran curr(EUR)  Local curr(USD)
21 5004789     Vendor                                   24,718.48        38,777.13  USD
96 2525000     /P-GR/IR NON-INV                   24,718.48-      38,892.22- USD
81 6584785     SERV-OTHER O/S                     0.00            115.09  USD
This problem is same like GR and also SPL document is posting differenly for ZG and ZL ledger.
ZL ledger is posting same like Accounting CM document ZG is posting with the different amount . This different amount is nothing but the exchange rate as per the posting date 03/25/2008. Exchange rate on 03/25/2008 is differe from IR date 02/15/2008 .
ZL ledger is calculating based on the 02/15/2008 date and ZG ledger is calculating based on the 03/25/2008 . Difference between Exchange rate entered in the CM and 03/25/2008 table entry rate is showing exchange rate difference field in the Addtional field in the document display.
Thanks in Advance.

Dear Friends,
Thanks for your helpful answers, actually we are in big export business. So we have to clear 100s of invoice lines with payments at one go, (which obviously being booked at different dates) so it would be very difficult for the user to go one by one invoice.
My concern is, why system does not calculate exchange rate difference based on actual documents, i.e. Invoice to payments only. I think there might be some configuration needed to implement this functionality.
Please help.
Regards

Similar Messages

  • EXCHANGE RATE DIFFERENCE WHILE CUSTOMER CLEARING

    Hi,
    while clearing the customer through f-32, system is not picking the exch. rate. gain/loss a/c. Also when I am clearing the payment on same date as the payment date, system is not picking the same exchange rate as it is for payment.
    Regards,
    akash

    Hello Akash,
    i think this may help:
    The currency rate picked up by the system is the current one, not the
    rate in the posted document.
    However, this can be avoided by setting the flag
    flag "XSLTA" (no foreign exchange rate when clearing in Local currency).
    in fs03.
    Please set this flag and then simulate the clearing with currency
    (local currency). Exchange rate differences items are not posted.
    Please refer to the field on line documentation for and example and
    further information.
    Kind regards,
    Jon

  • Exchange rate differences not posted in paralel currency

    Hi gurus,
    I have a difficult one. I have the followign situation:
    1)     We are using CLP for Local Currency (pesos chilenos)
    2)     We are using USD for Local 2 Currency (group)
    3)             We have implemented the Material Ledger (USD currency)
    We have a problem when we post an Invoice (trx MIRO) with different date of the good recive. The currency of the purchase order is the same as the local currency (pesos chilenos CLP).
    The problem is that the posting in the paralel currency does not post the Exchange Difference between the GR and the IV,  instead the posting is with charge to the u201Cprice differenceu201D.
    Does any body know if it is possible to post this difference as "Exchange rate difference?.
    Regards,
    Santiago

    Hi,
    Thanks Shaubhikg. This OSS notes describes about how the closing entries takes care of the both price and exchange differences of the material procured and production variances. But still my answer is unanswered.
    My worry ts that  since the exchange differences were captured in accounts of KDM but not seen when I see the material in CKM3. Any more inputs from you or from other fellow brethern!
    Regards,

  • Exchange rate difference while cancellation

    All,
    I have done MIGO for Imported items .
    Accounting entries generated .
    Suppose Exchange rate is 1 EUR = 5 EGP
    Suppose it is dr : 100 EUR (stock)
                        Cr:  90 EUR (GR-IR)
                PPV Cr : 10 EUR
    While doing the MIGO Cancellation for same document ( 102 Mvt type ) ,
    Accounting entries reversed ,
    but coming as different .
            Cr : 99 EUR
            Dr : 90 EUR
    PPV Dr : 9   EUR
    But while displaying in Local currency , entries while MIGO and also for reverse are absolutely same .
    How this is happening ?
    Kindly advise.
    regards

    Hi,
    You cannot make the default setting for exchange rate fix in PO. When you make the ex.rate fix you need to enter the exchange rate in the adjacent field. This rate value may be as per the billing of ladding date or Letter of indent date depending on your business.Therefore in case of import PO please check /change the rate and fix it before making the GR.
    regards
    anbumani

  • Exchange Rate Difference Posting

    Dear Gurus,
    I am facing atypical scenario in Production and development Clients.While clearing open items for a BanlK GL (USD Currency) in production there is no exchange differences being calculated by the syste.There is difference in Exchange rates between the original document and the clearing document.
    But for the same GL in Development I am getting Posting to Account maintained in KDB Key.
    I would like to know what can lead to difference in scenario that in one case system is calculating difference and posting and in the other case no.
    Please help.
    Regards
    Raju

    Dear All,
    Let me elaborate the scenarion in more deatil:
    We post Foreign Currency Invoice LIV--MIRO say rate is 41 USD/INR
    For payment F110 No Exg rate differences is selected in FBZP--So no Exchange Rate Difference is posted for payment.
    Now for clearing the bank Sub account Entry posted by APP user input LIV Exg rate in past and systen allowed to clear with no Exg rate Differ.This is OK.
    Now when user try to clear same account with same entry system is issue msg like No Exg Rate diss account maned.I tried to clear th GL document with both LIV and APP exchage rate its strange that is each case system expects Exchange rate diff account.
    I maintained in FBKP KDB in development client but then Exg Rate diff is getting posted which is not the requirement.
    Can any body please help.
    Regards
    Raju

  • Exchange rate difference coming in BRS

    Dear FICO Experts,
    we created 3 bank g/l accounts like main, reciept and pmt. but currency assigned in control data is USD bcoz all transaction vll be posted in USD. We also defined house bank master data in FBZP for the same.My company code curency is INR. Now we maintain exchange rate on 1st day of the month. For e.g. we defined exchange rate as on 01/11/11 say 46 per USD and my user posted one journal entry on 03/11/11 for 1000 USD @ 47 as per bank transaction. Now when m doing BRS on 03/11/11 for the same transaction, system is taking exchange rate defined in ob08 i.e. 46 and there for while doing BRS system is showing exchange rate difference G/L for Rs 1000 (46000-47000) which i dont want. bcoz act transaction amt is 47000.
    Please advice for steps to be followed.
    Thanks in advance.

    Dear Ravi,
    Thanks for ur prompt reply but I have already done OBA1 configuration and therefore, exchange rate difference G/L is coming. My requirement is that, we dont to post any amount in exchange rate difference while doing BRS.
    Thanks & Regards,
    Virendra.

  • Exchange rate difference in GR & IR

    Hi experts,
          I am using " V" price control for imported goods. Many times exchange rate at the time of IR is different from GR.
         So, while posting vendor invoice (i.e. MIRO) exchange rate difference is posted to Exchange rate diff A/C (KDM account) only if stock quantity (book inventory quantity) is smaller than IR quantity or "zero".  Otherwise this exchange difference is posted to "stock account" (if stock is available).
        At the time of MIRO, I want every exchage rate difference to  be posted to Exchange rate diff a/c (KDM account) regardless of stock quantity and price procedure (V or S).
    How to do this? Pls help me out. Thanks in advance
    regards
    jai

    Hi,
    When an invoice relating to a purchase order is posted with a different exchange rate to that of the goods receipt exchange rate; the differences arisen for the open items will be posted to the transaction/ event key 'KDM' in the case of Standard price control "S" automatically.
    And, incase of Moving Average Price control "V", you need to take care that stock is undercoverage/shortage, to trigger KDM.
    Regards,
    Narayana.

  • Exchange rate diff amount posted to AUC asset

    Hello All,
    I am stuck with one issue and looking for some help
    We are creating purchase order with account assignment as projects and then doing MIGO & MIRO and then settling through CJ88 to AUC asset.
    The issue is related to exchange rate difference amount posted to AUC asset.
    MIGO and MIRO are done on different dates and the difference amount in exchange rate posted to GL account maintained in KDM.
    Now, when i settle the WBS element through CJ88 the AUC asset is posted with amount including the exchange rate difference amount.
    Business do not want the exchange rate amount added to the AUC asset.
    please confirm is this the system standard behavior .
    Your inputs appreciated.
    Thanks
    Shashi

    Hi Shashi,
    As per Accounting Standards, the asset must be valued on the exchange rate on the date which risk and reward is transferred from seller to buyer.
    For example If the vendor despatch the assets on 01.03.2014 at his place and contract is Exworks then the asset must be valued on exchange rate on 01.03.2014. Lets assume exchange rate on that day is 1USD=60INR. The price is 100 USD. You receive the assets on 10.03.2014 and exchage rate on that day is 55 INR. Now if you make GR on 10.03.2014 Asset value will be 5500 INR whereas as per AS it should be 6000 INR. That is why when you do MIRO the differnce between 6000 and 5500 is posted to asset.
    When you do MIRO you must enter currency(USD) in Basic data tab and exchange rate 60 in details tab.
    What happens in your system is standard behavior of SAP as well as correct process as per Accounting Standards.
    Hope it is clear.
    Regards,
    G.Sethuraman

  • GR / IR exchange rate difference hitting Asset account

    There is exchange rate difference during GR and IR , While posting invoice this exchange rate difference getting posted to Asset , which should not happen , Should get  posted to Exchange rate Gain /loss account
    Please help me how to resolve this issue .

    Hi:
            Please check account assignments in OBA1..KDF ,,See if GRIR clearing accounts have been maintained there or not. If not then they should be maintained there . Further double click after maintaining account there and there you will have to assign GL account for exchange rate gain and loss . Also check in OBYC the assignment of GRIR clearing account,
    Regards

  • Exchange rate difference in SAP MM

    Hi experts,
    Is there any way to bring the exchange rate difference at time of invoice to some other account rather than stock account.
    The scenario is; for eg.
    in PO :   1 USD = 50 INR
    @ GRN 1 UDS = 55 INR
    @ INV    1 USD = 60 INR
    At the GRN, inventory will be updated with 55 INR.
    At the INV, system will value vendor at 60 INR, but in Standard SAP, the difference of 5 INR will be updated as below.
    1.  exchange rate diff. will be posted to stock account if available stock qty is >= invoice quantity
    2.  exchange rate diff. will be posted to exchange rate diff acct (as per KDM) ,if available stock qty is 0
    3.  exchange rate diff. will be posted propotionately to stock account and exchange rate diff acct (as per KDM) ,if available stock qty is <  invoice quantity
    Is there any way, that system will post the exchange rate difference to separate account , rather than inventory.
    It is because in client audit, the audit concern say, according to Indian standards, inventory should be valuated only one time in imports. In case of any differences, it should post to separate account and not inventory. They say SAP allows that. Client asked us the same.
    I have checked, OMRW, but even after giving 'N' in ERD setting, system is posting to stock account only.
    Any way to meet this??
    Regards
    sBk

    Dear Sujith,
    Exchange rate differences for a moving average price material will be
    posted to the stock account, provide there is sufficient stock coverage.
    Transaction OLMR -> Incoming invoice -> Configure how exchange rate
    difference are treated.
    If you set this selection field then the settings in the ERD Setting
    column for this currency type are no longer relevant. The system
    calculates and posts exchange rate differences between order-related
    goods receipts and invoices not just for materials with standard price,
    but also for:
    * Materials with moving average price
    * Account-assigned transactions
    * Planned delivery costs
    Because of this setting the exchange rate differences are posted to KDM
    account  instead of stock (BSX) or price difference (PRD) account
    If you uncheck the field, exchange rate differences will be posted to
    the stock or price difference account, for a moving average price
    material, based on the stock coverage.
    Please refer Sap note  980402 in detail
    regards,
    lalita

  • Exchange rate differences not found in CKM3

    Hi ML Experts,
    PO has been raised with foreign currency. At the time of GR, the same price has been paid at the same exchange rate. Only the other charges like custom and CVD charges were paid in an increased exchange ratio. Hence, all these exchange rate differences got posted to the accounts assigned in KDM/KDR. But when I see in CKM3, exchange differences are not found. .Is there any setting imissing or should be done?.

    Hi,
    Thanks Shaubhikg. This OSS notes describes about how the closing entries takes care of the both price and exchange differences of the material procured and production variances. But still my answer is unanswered.
    My worry ts that  since the exchange differences were captured in accounts of KDM but not seen when I see the material in CKM3. Any more inputs from you or from other fellow brethern!
    Regards,

  • Basic questions about Exchange Rate Differences

    Hi Experts?
    I have few questions about exchange rates:
    1. Currently in 2007, under what circumstances are exchange rate differences not posted automatically? In the previous version, it was this case when invoices are linked to payment, and manual exchage rate differences had to be run.
    2. What are unrealized exchange rates? and When do unrealized exchange rates occurs?
    3. In account oo logical pinciples, why is there a need to auto reverse Exchange rate differences or Conversion rate differences during the opening of a new posting period??
    Much Thanks!
    Warmest Regards,
    Chinho

    Hi Chinho,
    you may find useful info in this wiki:
    [How does SAP Business One deal with Realised and Unrealised Exchange Rate Differences? |https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=60654139]
    & also these 2 EES:
    [Exchange Rate Differences|https://psd.sap-ag.de/PEC/calendar/html/recording.php?hck=7a4f07ef7ac81ec31e04d55faffe33bdde93ec2398c338760e0d98adab7ba5acf2c39b2da1782f45e8a5a4d337dedcc647afebddd531782af42bafae98ce7ed5]
    [Exchange Rate|https://psd.sap-ag.de/PEC/calendar/html/recording.php?hck=e5397f14c44f8df754617194051dab1ad38f59f08580406c2efd59aa4c0f71616713c2abe76bc503e08f2f5eda4863634f6fe99ad39d46c947c09623b91e53ca]
    As a rule, in version 2007 it's the unrealised exchange rate differences on the BP side that are relevant since with the introduction of the unified internal reconciliation engine realised partial exchange rate differences are automatically posted. You also use the functionality to post exchange rate differences for FC GL accounts at a particular execution day.
    All the best,
    Kerstin

  • Exchange Rate Differences

    Hi experts,
    i understand the general concept of exchange rate differences ie Rate at which one currency may be converted into another. The exchange rate is used when simply converting one currency to another
    but i need to know where it will affect in SAP and what is the use in SAP?
    regards
    anand

    Hi Anand......
    Please read teh following para......
    Exchange Rate Differences
    Use
    When you maintain a foreign currency (FC) business partner and/or accounts, all related bookkeeping is conducted in the FC. As the bookkeeping system must also be conducted in local currency (LC), every FC transaction of this nature also is expressed in LC according to the FC exchange rate on the date of transaction. The daily fluctuations in the FC exchange rates create a situation whereby the balances in LC and FC do not match. The automatic exchange rate differences are designed to periodically recalculate the LC and FC balances, according to the exchange rate on the day the differences are calculated.
    SAP Business One can provide recommendations for executing automatic journal transactions for exchange rate differences in FC business partners and accounts, correct to a given date. The function of the program that calculates exchange rate differences is to reconcile between the FC card balance and the LC balance, considering the fluctuation in the FC exchange rate.
    To access the Exchange Rate Differences function, choose: Financials ® Exchange Rate Differences.
    Hope this may help you to understand the concept of Exchange Rate Difference....
    Also check this Thread.....
    Regards,
    Rahul

  • Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

    Hi Gurus,
    We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
    1)
    G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
    Posting:
    Service A/C.....100 USD (Rs. 4900)
         To SR/IR Clearing A/C...100 USD (Rs. 4900)
    2)
    MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
    Posting:
    SR/IR Clearing A/C......100 USD (Rs. 4900)
         To Vendor A/C...........90 USD (Rs. 4320)
         To TDS A/C..............10 USD (Rs.  480)
         To Exch. Difference A/C. 0 USD (Rs.  100)
    This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
    3)
    Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
    Vendor A/C......90 USD (Rs. 4320)
    TDS A/C.........10 USD (Rs.  480)
         To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
    4)
    Now when we try to post MIRO again, it is posting the following entry:
    SR/IR Clearing A/C......97.96 USD (Rs. 4800)
    Exch. Difference A/C.....2.04 USD (Rs.    0)
         To Vendor A/C........... 85 USD (Rs. 4080)
         To TDS1 A/C............. 10 USD (Rs.  480)
         To TDS2 A/C.............  5 USD (Rs.  240)
    This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
    Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e.  4800 / 49).
    Please help.
    Thanks!
    Regards,
    Angad Nagpal

    Solved.
    The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
    Thanks!
    Regards,
    Angad Nagpal

  • Exchange rate difference not getting posted to KDM account during MIGO/MIRO

    Hello Gurus,
    I have a purchase order with many line items. For some of the line items, the exchagne rate difference between the date of MIGO and the date of MIGO is taken to the KDM account. But for some other line items, it is not being taken the KDM. For such line items, the value of the GR/IR account in the local currency is different from MIGO to MIRO. Due to this, the GR/IR clearing is not happening automatically.
    Do you have any idea, why the system is not taking the different to KDM for some line items and taking it correctly to KDM for others.
    The only difference that I noticed between these 2 line items was
    In case where the KDM account is determined, the GR was done for only one line item
    In case where the KDM was not determined, the GR was done for more than one line item.
    Thanks in advance for your replies
    Thanks and Regards
    Venkatesh

    Hi Venkatesh,
    I suspect that in your system may be the setting in OMRW is not activated. If the CCurr indicator is not activated for respective company code. Please refer to the information from note 980402 :
    After you implement this note, you can use Customizing transaction OMRW to make settings for the new logic for each company code and each currency (the first local currency and two other material ledger currencies, if the material ledger is active). If the CCCurr indicator (V_169P_PK-KDHW) is set, this activates a new logic for calculating the exchange rate difference (KDM amount) in the company code currency (first local currency). As a result, the system also generates KDM lines for purchase orders with account assignment and for purchase orders with MAP materials in inventory management and in invoice verification if required. If the material ledger (ML) is active, you  can set a corresponding indicator for additional ML currencies.Bear in mind that the system performs a 1:1 cancellation for the KDM line in the cancellation transactions.
    If the indicator is not activated, then the new logic for calculating the exchange rate difference is not active.
    I hope this helps.
    Regards
    Ravinagh Boni

Maybe you are looking for