Exchange rate error while Uploading material in MB1C; MovType 561
Hi Experts,
I am trying to upload material in MB1C (movement type 561). When I am saving, system is giving following error.
My company code currency, material master currency is EUR but still following error is occuring.
"Enter rate EUR / rate type M for 01.10.2010 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction."
Do I need to maintain exchange rate inOB08 for EUR to EUR conversion? Or is there any other setting?
Regards
Anand
Hi,
No need to maintain conversion between EUR to EUR.
We'll take one currency as standard for conversions.
In our case for every currency we have to maintain conversion for USD
EUR to USD
USD to EUR
INR to USD
USD to INR
May be you have to maintain like above.
Rgds
Murali. N
Similar Messages
-
Error while uploading stock using Mb1c and migo
Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
ThanksHi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore -
Error while posting material in MB1c
Hi
how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
Kindly help.
Thanx.Hi Mukesh
In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
This should solve your problem
Rukshana -
Error While Uploading Material Master Through Bdc Call Transaction
Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PMSorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MVKE-SKTOF'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARC-PRCTR'
wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARA-IPRKZ'
'D'. -
Exchange rate error in Material Master Upload (MB1C - 561)
Hi.
While uploading material through MB1C with movement type 561, I am getting following error
My company code currency, material master currency is EUR but still following error is occuring.
"Enter rate EUR / rate type M for 01.10.2010 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction."
Why system is asking to maintain exchange rate for same currency?
What are the settings that I should maintain? Thanks in advance.
Regards
AnandHi,
My material master currency is EUR
Both Stock and Upload GL accounts currency is EUR
Co COde currency is EUR
Where else is the revevant Settings?
Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
25/Oct/2010 system is giving exchage rate error
What could be the remedy?
Regards
Anand -
While uploading material give error
hi friends !!!!!
while uploading material give error
item categary is not assign to g/l a/c and chart of a/c
thanks in advanceDear hanumant
Go to OMS2, select the material type and double click on "Quantity/Value Update" button on your left screen.
Here for the combination of valuation area and material type, choose the two boxes "Qty.updating" and "Value updating".
Thanks
G. Lakshmipathi -
I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irfhi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM -
Error while uploading Template
Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING Cp1252
Language Section* EN-US
Catalog Section Supplier* Title
FEDERAL INDUSTRIES Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PMHi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH -
Error while uploading BITMAP image in SAP through SE78.
Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav. -
Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
TarunHi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj. -
Error while uploading Transport request
Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
DeepakHi,
Check the versions of the two sap systems you are downloading and uploading the transport requests -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Background job finishes but error Error While Updating Material into Standard SAP5678
Dear
we run background job which finishes successfully but when we sqw logs it shows
Error While Updating Material into Standard SAP5678
Kindly share the reasons
RegardsThis is an ERP Upgrade space and you should consider raising threads in the right space for prompt replies. Next time consider using SAP NetWeaver Administrator space for issues like these. Also you should consider closing your previous thread with the correct answer for future reference.
What I see is a custom job. You should check what the job does and also the trace file of the work process and the consult with the application team or the developer for more information. Unfortunately with that screenshot there is nothing much we can advice you.
Regards
RB -
Getting error while uploading a document in a library
Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
RegardsHi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Error while uploading text file....
Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
ramaHalo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr20 like qmfe-/itml/usr20,
end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr21 like qmfe-/itml/usr21,
end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr19 like qmfe-/itml/usr19,
end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr07 like qmfe-/itml/usr07,
end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
gs2_qmfe like line of gt2_qmfe,
gs3_qmfe like line of gt3_qmfe,
gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
ls_lines2 type i,
ls_lines3 type i,
ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,
ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.
field-symbols: <fs1> like gs1_qmfe,
<fs2> like gs2_qmfe,
<fs3> like gs3_qmfe,
<fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*& Form upload_gt1_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM. " upload_gt1_qmfe
*& Form upload_gt2_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file2
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM. " upload_gt2_qmfe
*& Form upload_gt3_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file3
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM. " upload_gt3_qmfe
*& Form upload_gt4_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file4
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM. " upload_gt4_qmfe
*& Form update_qmfe
text
--> p1 text
<-- p2 text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set /itml/usr20 = <fs1>-/itml/usr20
where qmnum = <fs1>-qmnum
and fenum = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM. " update_qmfe
Maybe you are looking for
-
Creating a web service from existing EJB. HELP!!!
I have an existing EJB deployed to WL which I want to call as a web service. I do not want to deploy everything in an EAR - I want to use the existing EJB. Basically I just created a new web module and put my web-services.xml (and web.xml) in WEB-INF
-
I have recently installed and used Creative Cloud and also install several applications. The apps and cc ran fine but Adobe AE would crash upon startup of the app in which is prompted a message stating ...the drive which it is installed on does not h
-
Hi all I would like to know if I can find somewhere tha complete history of Updates for Acrobat 7.0 and what was fix in each of these updates. Thanks
-
Windows system exec error in application causes app to crash
The basics: LabView 11.0 (32-bit) Windows 7 enterprise Because I have to control an elevated app I run my built app elevated on a Win7 64 machine. I have an application that uses the system exec.vi (attached) to get a portion of the arp table. When I
-
Notifications Panel Not Showing the Desired Number of Items
I have been doing some tweaks to the notification panel on my iPhone 6. For the Dropbox widget, I changed the Notification setting to display 1 most recent items instead of the 5 most recent items. However, whenever I swipe down the notification pa