Exchange Rate Field - Frozen in Sales Order Header

Dear Fellows,
Can you please help me on this?
When we enter a standart sales order (J4211) , then in the header side of the order the exchange rate *(USD/TRY)* field comes as frozen and does not give any possibility to modify it. Because , it takes the daily exchange rates from (J00151)table. You cannot change the rate on the order.
The question is : how to enable it to allow the fx rate modification in the order header?
Many thanks in advance...
Regards,
Ozgur

Hi,
Can you please elaborate on what you mean by "picked up wrong exchange rate". Normally in the "Sales" tab in SO header you have a place where you can enter / see the exchange rate.
Regards
Sreekanth.

Similar Messages

  • Exchange rate automatic update in Sale Order

    Dear All,
    This is regarding Exchange rate automatic update in Sale Order and requirement said below.
    Process:
    User will created a Export Sale order in the month of November , that time Exchange rate is 50.00, this  will
    get updated in Sale order Header and Item level.
    But user will create billing in the month of December , at that time Exchange rate is 40.00. So in Billing
    document Header level exchange rate will be 40.00 (Current rate) and Item level exchange rate will be
    50.00.
    Requirement:
    User requirement is like this the current exchange rate 40.00 to be updated in Sale Order Header and Item
    level automatically, because user using  Sale order Exchange rate  for Z-Report.
    As of now user manually updating Exchange rate in Sale Order.
    Let me know if there is any solution.
    Regards
    S Kumar

    I dont think this is possible.  You should be aware any change in subsequent document would not have any impact in the preceding document which means, whatever exchange rate flowing in billing cannot be updated in sale order.  May you can update your zee table by considering the billing document exchange rate by way of exit.
    thanks
    G. Lakshmipathi

  • Updated exchange rate not captured in sales order

    Hi,
    We have updated exhange rate type from 'M' to 'S' . However even after refreshing the sales order new exchange rate type not captured in the sales order

    Hi,
    Can you please elaborate on what you mean by "picked up wrong exchange rate". Normally in the "Sales" tab in SO header you have a place where you can enter / see the exchange rate.
    Regards
    Sreekanth.

  • Exchange Rate calculation mismatch in Sales Order Invoice and Cancelled Invoice

    Hi,
    In Sales Invoice, Exchange Rate is maintained as 7.75132
    Invoice Amount is 72000 USD. So the Amount calculated should be 558095.04.
    But in Accounting Document the Amount is posted as 558095.15 for the GL Sales Account.
    In Cancelled Sales Invoice, Amount posted is  558095.04 in GL Sales Account which is correct.
    Please help me understand why there is difference in both the Amount even when the Exchange Rate is same.
    Regards,
    Debashri Dutta

    Hi Ankur,
    Thanks for your reply.But our problem is sales order,exchange rates are defined with M type in OB08 as u have said.However when the periods are different for order entry and invoice generation we are facing the following problem.Orders are at old exchange rates and excise invoice is getting generated at current exchange rate.This is resulting in value difference between commercial invoice and excise invoice.
    Please help.
    Regards,
    Praveen

  • Different currency exchange rate at time of sales order and invoicing

    Hi Friends,
    Actually,we are facing a crucial problem in Export where we would like to have the current currency exchange rate to be applicable both at excise and commercial invoice.
    Regards,
    Praveen

    Hi Ankur,
    Thanks for your reply.But our problem is sales order,exchange rates are defined with M type in OB08 as u have said.However when the periods are different for order entry and invoice generation we are facing the following problem.Orders are at old exchange rates and excise invoice is getting generated at current exchange rate.This is resulting in value difference between commercial invoice and excise invoice.
    Please help.
    Regards,
    Praveen

  • Additional field in the sales order header Purchase Order Data tab

    Hi,
    I want to add an additional field in the below screen:
    VAO1 > Go to > Header > Purchase Order Data >
    Under Sold to party section i want to add an additional field.
    Is this possible through configuration?
    Please let me know.
    Thanks in advance
    Edited by: Kase on Dec 20, 2011 7:06 AM

    Hi Kase,
    Check this below link it might be helpful for your issue
    sales order - Additional data B
    new fields in sales order
    Regards
    Pradeep

  • Version field  Sales order header

    Hi,
    Whats the purpose in the version field in the sales order header, and does this data get carried to any other modules or anywhere?
    I need to maintain a number field in the sales order header, could this field be used?
    Thanks
    Keshini

    Check in COOIS... Add the version by changing the layout.please check and revert...
    karthick

  • Additional field in the sales order screen

    I need some additional field in the sales order screen. There is
      also no screen exit available for VA01. Can I use this
      additional data B tab in header details by creating additional
      field in it. Please tell me how to use this tab or how to get
      different field in the sales order (header or item level).

    Hi,
       Yes. You can use this screen. For this either can modify the table VBAP with additional fields and put them on this screen.
      You have to code your logic to save these values in the include MV45AFZZ. The subscreens you have to use for this are 4462 or 8459.
    refer Screen exits - Urgent.
    with regards,
    Vamsi

  • Subsinvprocess in the sales order header --- billing tab and in the custom

    Hello All
    there is a field SubsInvProcess in sales order header - billing- tab and in the customer master - billing tab
    what was the functionality of this field. I never worked with it
    kindly help on this one. 
    Thanks,
    prasad

    Dear Vara prasad,
    The value of this field is if you want to print the invoices that are being posted manually you can activate this field.
    It will be directly proposed from customer master to sales document, where you can change.
    Please let me know if you want any further clarifications.
    Please go through this thread also for further reference.
    Clarification for usage of Subsequent Invoice Processing in Customer Master
    Thanks&Regards
    Raghu.k

  • How to activate the "Set Exchange Rate" field in billing document header?

    Dear All,
    I would like to get the exchange rate at the time of the billing without changing the sales order exchange value.
    The set exchange rate field is grayed off.
    Thanks in adavance.
    Regards,
    Niketan

    Hi,
    This can be achieved using the copy control setting for billing at the Item level. The field is: PricingExchRate type
    and the possible values relevant for you are:
    C     Exchange rate determination according to billing date
    E     Exchange rate determination according to current date
    Hope this helps!
    Thanks
    Siva

  • VA01 Sales order - Header-- Accounting tab need to add a field

    Dear All,
    The requirement is,
    1. I need to add a field in Sales order.
    Path for the same is as follows:
    VA01> Goto> Header--> Accounting tab
    2. The field will be a date field that needs to calculate date on.
    a)create a new field. ex - zchdt (chq due date)
    b)when customers enters value in Assignment,
    i.e vbak-zuonr
    after that trigger logic is
    3.vabk-kunnr = knvv-kunnr
    a)sy-date + knvv-kvgr2 (exclude sundays)
    example - 14 sept + 30 days = 14th october
    should populate value - 14th october i.e. field (zchdt)
    4. This activity needs to be triggered before the sales order is saved.
    kindly know whether this is possible or not.
    if possible how & which exit & also with example code.
    if you could give me your contact(cell no).
    Regards,
    Nagendra D.S.
    Mobile - +91 9819899082

    Hi All,
    VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
    when customer enters value in Assignment i.e zuonr & after that trigger logic is
       1.     vbak-kunnr = knvv-kunnr
       2.     sysdat + knvv-kvgr2 (exclude sundays)
    example - 16 sept + 30days = 16 oct
    in field zchdt value 16 oct as to populate
    Pls help me in the code.
    Regards
    Nagendra

  • How to add a field in sales order header

    Hi all,
    I need to add a custom field say a check box in sales order header in additional data B tab.
    let me know step by step.
    Points will be rewarded.
    Thanks.
    Ramya

    additional data B in sales order
    sales order - Additional data B
    Add new fields to Additional Data B tab in sales order
    Reward Points..

  • Activate field at sales order header level

    Hi,
    I can see field AUFNR (Order) in sales order header table VBAK. But not able to found same filed in sales order through using t c.code VA01. Where I can see this at header level? How to activate this field if I want to see in sales order?
    Thanks,
    Mohan

    Hi Mohan
    First of all Welcome to SDN forum
    Go to transaction variants using t.code SHD0 and give t.code VA01 and then give the business object as BUS2032 then you will get the programs . select the program and in that and check the AUFNR order feild
    that is as you said that it can be seen in the VBAK table check in this VBAK table ( AUFNR - VBAK) . If that feild is suppressed then make it optional and then save it and then create the sales order and then check the AUFNR feild in VBAK table. It should come in optional mode
    Regards
    Srinath

  • Assignment number Field in sales order header

    Hi All,
    Can anyone let me know the ORDERS05 IDoc segment that corresponds to the Assignment number field in sales order header Accounting tab?
    I need to specify the assignment number while creating a new order through IDoc.
    Thanks.
    Regards,
    Riyaz

    Hi,
    Use transaction we60 to find the relevant documentation for your idoc type.
    regards,
    Jakub

  • User based block the pricing field in the sale order

    HI FRIEND
    We have requirement user based block the pricing field in the sale order
    pls suggest me the configuration steps
    with regards
    dinesh

    hi friend
    when create a sale orde,r price and exchange rate is triigger from the master record.
    head department want not require to End user to change the price in the sale order .
    so head department only have authorisation to change price.
    selected user is not allow the change the price.
    so i need the configuration
    with regards
    dinesh

Maybe you are looking for