Exchange rate maintainance as per company code or ledger in OB08

Hello,
Is it possible to maintain exchange rate as per company code or ledger in exchange rate table.
If not, please suggest any other alternative where I can maintain exchange rate as per company code or ledger.
Regards,
Tapan

In table T882, you can see ledger and company code assignment; with currency keys and additional currency types used for company code/ledger. You have option to choose the currencies at ledger and company code level, but not the currency type. Exchange rate type 'M' is used and even hard coded in many programs/transactions for actual postings. In planning, to some extent you have the option to choose exchange rate type, default is 'P'.
Regards,
Ganesh

Similar Messages

  • Exchange Rate type Assignment to Company Code

    Hi,
    I'm working on the implementation of a new company code on a SAP R/3 4.6c release. I've created a new exchange rate type EURH (with transaction OC47) and I would like to know hot to assign it to my new Company Code.
    Is there a specifc standard transaction? Could you please suggest me a possible solution.
    Thanks!

    Hi
    Exchange rate type you cannot assign to a company code. Where as you can specify explicitly while document entry.
    By default in SAP for a new company code system will use 'M' rate as standard. If you want to replce this exachange rate type with your new exchange rate type then goto SPRO --> General Settings --> Currencies --> Define transilation ratios for currency translation
    Maintain new exchange rate type as Alt.ERT against 'M' rate then system will take new exchange rate instead of 'M' rate. Otherwise as I said earlier, you can use created exchange rate type in any company code by specifying in document entry or payment program, or  you even can assign ex.rate type to a Document type, etc.,
    Hope above helps.
    Regards
    Siva
    Message was edited by:
            Siva Satyanarayana

  • Exchange Rate Maintenance for two company codes..

    Friends,
    My client is having two company codes
    X = India
    Y = USD
    US Company code is live for the last few years and India Company code is created recently and the same is live now.
    Now when the US company code creates Purchase Orders /  Scheduling agreements, the following error is encountered.
    "Enter rate INR/EUR rate type M for 31.07.2008 in the system settings.:"
    Now my question to the forum is that
    1. If we maintain the exchange rates in OB08 will there any other effect ?
    2. Is this error because One more company code is added to the same client which is operating in INR ?
    3. When US Company code is not all transacting with India Company Code why is this error encountered.
    Appreciate if some one can explain the pros and cons of this please. I am basically an MM consultant and I would also like to know the FI impact in this scenario, hence posted this question in FI forum.
    Regards

    Hi,
    At the time of initial installation SAP would make EUR as base currency, so any new company code you create needs to have an exchange rate defined to the base currency EUR.
    In your case you can define exchange rate to EUR and process PO, as per my knowledge there will not be any impact of this.
    Thanks,
    Ramesh.

  • Actual and Plan Versions annual view - Multiple versions per company code

    Good Day,
    Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
    Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
    Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
    Kind Regards

    Remove restriction on comp code. There could be 2 models.
    1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
    2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

  • Set Up Payment Methods per Company Code for Payment

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to  define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Generally Payment method is defined for a customer at Company code level and Sales area level. Through Partner function we can control who has to make payment. In your case , if you need to define different customer as payer you can do so in KNVP table. while making sales order payment terms will pick from Payer of the Sold to patry customer.
    Not sure why do you wants to link to Company code

  • Set up Payment Methods Per Company code for Transaction

    Hi All,
    Can any expert please suggest whether do we need to enter only paying company codes while defining the payment methods per company code or enter all company codes.
    Ex: We have 10 company codes for which there are 3 paying company codes. After defining the payment methods in the country, while defining payment methods per company code do we need to define for only 3 paying company codes or for all 10 company codes. Because when you are paying through one company code on behalf of three company codes, how does it make sense having the payment method in company codes which are not paying. I hope my query is sensible.
    Thanks&Regards
    Srinivas

    Hi,
    You should define the payment method in all the 10 company codes regarding they are the paying or non paying company code.
    If you are not defining them they you will not have the option to select the payment for that particular company code.
    regards
    pbb

  • Which table will give vendor master details per company code per purchase o

    Which table will give vendor master details per company code per purchase organisation that is all details available in XK03?

    hi
    Check T code MKVZ
    Or table LFA1
    Vishal...

  • Vendor if not maintained at the company code level

    Hi,
    System should not save the PO, if the vendor has not maintained at the company code level. How to achieve this?
    Regards,
    Sattuj

    > System should not save the PO, if the vendor has not maintained at the company code level. How to achieve this?
    Vendor Need not to be Maintained at Company Code Level For Creating Purchase Order.
    During IR only System will Look whether Vendor is Maintained at Company code Level.
    Try the User Exit MM06E010 Field selection for vendor address and Check any Possibility is there.
    What you can do is you Can Restrict Users to Use MK01. And give Authorization to Limited Users for XK01.
    Regards,
    Ashok
    Edited by: Ashok Kumar Telikula on Sep 18, 2008 9:05 AM

  • Bus. Entity - Default Unit of Measurement per Company Code

    Experts, I have assigned the default units of measure in "Make Basic Settings in Company Code" config. Surprisingly these entries don't show up in "Default Unit of Measurement per Company Code" config under Business Enity. Also, I cannot add those entries.
    Please treat this as urgent!
    Thank you.

    Hi,
    Goto RealEstate (not RE-FX, though you are using RE-FX) \ Basic settings \ Basic Setting for Company codes / Financial asset management, select checkbox of Fin Asset Mangmt for your company code.
    Now you can see this company code in company code level settings for company code in business entity level.
    Really i dont know why we have to check that checkbox of Asset management to allow at business entity level, but we have to.
    regards,
    Srini

  • FI documents summarization from SD per company code

    Hi gurus,
    We are summarizing FI docs created through the SD module as specified in oss note 36353.
    The thing is that this summarization applies to any FI doc created no matter the company code. Any idea how to set this summarization only per company code??
    Thanks and best regards,
    VL

    Hi Teresa,
    the cost objects in CfTE are always belonging to one FI system and only can be used for postings to that system. So if you want to replicate cost objects from a central system this is possible in the following way: in the newest version of the extraction report for sales orders there is a class method CL_ODTF_COBJ_REPLICATION=>SET_ORIGIN_FI_LOGSYS( ) available to overwrite the source system of the cost object. This can be called in the BAdI for sales order replication in order to set one of the decentral FI systems as the souce system. For other cost objects this feature is only available in the next version. Here a post exit or similar needs to be used to achieve the same thing. But still you only can set one FI system. So the cost objects cannot be reused for another decentral FI systems. If one cost object shall be used for two FI systems it must be replicated twice with different source systems.
    Hope this helps. If not please ask again.
    Best regards, Reinhard

  • Incoming invoice number range per company code

    Hi!
    I have a doubt.
    Is there the possibility of create incoming invoice number range per company code?
    I need the MM doc, not FI doc.
    Thank's!

    Hi
    If the settings available in OMR4 and OMRJ don't cover your requirements, try with enhancement LMR1M003.
    Regards
    Eduardo
    PD: I found it, see Note 452127 - MIRO: Standard number assignment per company code, you have a sample of coding for this enhancement
    Edited by: E_Hinojosa on Jul 11, 2011 6:37 PM
    Edited by: E_Hinojosa on Jul 11, 2011 6:38 PM
    Edited by: E_Hinojosa on Jul 11, 2011 6:42 PM

  • OB08 Exchange Rate Maintainance

    Dear Viewers,
    I would like to get the clarification on Exchange Rate Maintainance. Can we maintain the exchange rate in production directly on daily basis or do we need to move the exchage rate by request  in development .
    Thanks
    Aswin

    Hi
    Regarding Authorization as a Functional Guy we wont do any settings.This is done by Basis Guy in SU01.
    Every user will be assigned Roles and in Roles assigned are Authorization Objects.
    You tell this requirement to your Basis Consultant, he will be aware of Authorization Objects of the Tcodes OBBS and OB08 and he will assign the relevant so that you will be able to access.
    Regards
    Venkat

  • Collection Management - Distrubution per company code

    Hi All,
    In Collection management configuration,i trying active distrubution per company code, i able see only one radio button(Direct Payers). If i see anothere sap system there is around four radio buttons(all items for HO,item from direct payerfor HO,all item for Branch and alternative payer).
    Please can anybody tell me, what is configauration for display this radio button in my sap system.
    Thanks & regards
    Ravi

    Ravi - When you say "other SAP systems" are these two systems owned by the same client?  The ability to produce Collection Worklist at either branch or head office comes as part of Enhancement Pack 4 for FSCM.  Is it possible the two systems you are looking at have different EHP levels or that the Business Functions from EHP4 are activated in one system and not the other?
    CK

  • Logistic Invoice posting numbering per company code

    Hi,
    If we post an incomming invoice the numbering will be 5100000 for company code DE01
    next posting will be 5100001 for company code FR01.
    How can we setup that for every company code the number starts at 5100000?
    Thank you in advance,
    Eric.

    Hi,
    I did, but then you lose the 1 on 1 relationship with the MM LIV document.
    I would like a new numberrange for the MM LIV document per company code and the financial document will follow this flow. Is this possible?
    Best Regards,
    Eric.

  • Default Unit of Measurement per Company Code

    Dear Gurus,
    I'm trying to specify Default Unit of Measurement per Company Code into RE customizing but I can't make new entries or modify existing into change view.
    How can i solve my requirement?
    Than you in advance,
    Fuffo

    Hello Ute,
    we made all basic settings:
    -activate RE-FX
    -make settings in company code
    -activate RE manaagement in controlling area
    Into company code settings we mainteined DEFAULT UNIT OF MEASURE but into S_ALN_01001235 we can't find related entries.
    Any suggestion?
    Thank you in advance,
    Fuffo

Maybe you are looking for