Exchange rate of USD in INR for date could not be determined

Hi
I have a problem while creating a RE Sales order.
Error is :
Exchange rate of USD in INR for date 21.07.2006 could not be determined
Help will be appreciated.
Regards,

Hi,
Pls check the following things:
In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
For the date mentioned, the exchange rate might be missing here.
Hope, this helps!
Thanks,
Siva

Similar Messages

  • Error in converting exchange rate from USD to INR

    Dear Experts,
    My client is Export Business & when he is creating sales documents the system gives the error as:
    Condition VPRS: Error in converting exchange rate from USD to INR
    Message no. V1208
    Diagnosis
    An error has occurred during currency conversion.
    The following causes are possible:
    There is no valid exchange rate
    The calculation procedure was incorrect
    Procedure
    Check whether there is a valid exchange rate from VPRS to USD in Customizing, in the chapter "Define conversion factors for currency conversion", and supplement it as necessary.
    If you do not have the authorization to do this yourself, contact your system administrator.
    so expecting the solution for the same
    Thanks & Regards,
    SPT

    Hi,
    you have to maintain conversion rate from USD to INR in FI, img, sap netweaver, general setting,currencies, currency conversion rates
    maintain conversion rate and revert back
    regards,
    sadanandam kasarla
    Edited by: Sadanandam Kasarla on Mar 5, 2009 11:20 AM

  • Business Place for document  could not be determined

    Hi,
    When I am posting Remittance challan I am getting this following error,
    "Business Place for document  could not be determined".
    Could any body please help me to solve this problem.
    I maintained the following settings in system
    1. T-Code: J_1IEWTNUMGR
    UN04     SC04     194C     02
    2. T-Code: J_1IEWTNUM
    02     02
    3. T-Code: J_1IEWTNO
    Maintained Number ranges
    I posted vendor document and I gave Business place and Section code also. Even After all the settings I am getting this problem. Please let me know is there any steps I missed are any thing I have to maintain in system.
    Best Regards
    Raj

    Hi Pavan,
    Thanks for you replay. I checked in table, data available in the table J_1IEWTNUMGR against Company code, Business place and Off Key.
    One more question is whether we need to give Business place or Section code while creating TDS challan using J1INCHLN. It will appear like "Business Place/Section Code" in the screen. If I select from drop down It is taking Section code. Is it possible to change the logic from Section code to Business place.
    Thanks & Regards
    Raju.

  • The attributes for user could not be determined --

    Hi,
    Our is extended classic scenario:srm5.0 & ECC6.0
    we are getting the following error in the org plan:
    "The attributes for user could not be determined "
    The error is occuring , when we log into the web browser.
    we also have a error in the org plan, under the user at the check tab,"No attribute found for scenario BBP".
    when we run the BBP_ATTR_CHECK & BBP_BP_OM_Integrate, we have no errors...
    Thanks in advance,
    RK.

    Hi All,
    Thanks for your support...
    I check the T-code:BBP_ATTR_CHECK & BBP_BP_OM_INTEGRATE.
    I also checked the attributes for the CP are ok,still i had the error appearing in the WEB.
    The solution:
    The CP has been deleted from the org plan.
    Once again,we generated the users from USERS_GEN and assign CP to the org plan again at the same.Now the Attributes error is gone.... and the issue is resolved.
    Thanks and Regards,
    RK.

  • Error while J1INCHLN - Business Place for document  could not be determined

    Dear All Experts,
    I am getting below error while running J1INCHLN Business Place for document could not be determined. For updating Business Place & Section Code I am running J1INPP Update Business Place information in FI document.
    So I am getting error Document is incomplete.
    Further I decided to update this in BSEG manually from SE16N. I am getting two errors :
    1 ) Entry XX does not exist in T059Q ( Check Entry)
    2 ) Entry C1 does not exist in T059Q ( Check Entry)
    I have posted TDS to with these Tax Codes and same maintained in Vendor Master as well. But I am not getting these entries IN T059Q.
    I got way to maintain via View Maintainence. But I would like to know the significance of these details.
    Experts guidance will be helpful.
    Regards,
    Revati Joshi.

    Dear Expert,
    You might have not maintained a number range intervals for Remittance Challan for current year,
    Step-1:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Maintain Number Groups -- Provide your company code, Section Code, Official W/H Tax Key and Number Group - 001
    Step-2:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Assign Number Ranges to Number Groups --- Provide Number Group - 001 and Internal Number Range - 01
    Step-3:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans ---Maintain Number Ranges --- Select Maintain Groups button and select the 001 Check box and menu -- interval -- maintain and provide company code, and then select insert interval button and provide Calendar Year and Intervals
    after configuring this steps, try posting the documents by entering business place and section code in the accounting document and Create Remittance Challan in T-Code: J1INCHLC - Create Remittance Challan  and next for Bank Challan T-Code: J1INBANK - Enter Bank Challan and next for printing Withholding Tax Certificate T-Code: J1INCCERT - Print 
    Try this steps.. it will met your requirement..
    Regards,
    GOPI KRISHNA YANDRA
    SAP FI/CO CONSULTANT

  • Error in J1INCHLN " Business Place for document  could not be determined "

    Dear Gurus,
    While executing T-Code: J1INCHLN am getting the following error after updating all the field:
    Business Place for document  could not be determined
    Message no. 8I707
    Could you please help on this on priority basis.
    Regards
    JS

    Hi ,
    For slove that error
    You can maintain the internal number ranges for tax payment
    challans, with respect to each Section Code, in the Country Version
    India (CIN) Implementation Guide (IMG), by choosing India Localisation
    Menu > Tax Deducted at Source >Extended Withholding Tax > Creation
    ofremittance Challans > Maintain Number groups. This customizing needs
    to be maintained.
    (For direct view maintenance, use Transaction SM30, view name
    J_1IEWTNUMGR_1).
    On the Maintain Table Views: Initial screen, enter the table/ view name J_1IEWTNUMGR_1 and choose the Maintain push button.
    On the Change View Number Groups for Internal Challan Numbers u2013 EWT India: Section Code screen, make the following entries
    Company Code..... Section Code Off------ W/Tax Key-------Number Group
    XXXX-- XXXX 194C---- XXX
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • Error - The attributes for user could not be determined

    When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
    The attributes for user could not be determined
    It does not happen on other transactions (like Sourcing or Issue POs).
    The buyer is in the org. plan and I have checked the attributes and they seem ok.
    What could be the issue ???
    Thanks
    -Bakulesh

    Hi
    <b>Please go through these links -></b>
    The attributes for user could not be determined --
    'Error in writing attributes' when using function tab
    Company code for system missing in user attributes
    BBP_POC not working in SRM 5.0
    Re: urgent: regarding ATTRIBUTES
    Regards
    - Atul

  • WHT Error - Business Place for document  could not be determined

    Hi Gurus,
    I am getting error while creating remitance challan " Message no. 8I707 - Business Place for document  could not be determined "I have check all the configuration related to business place, section code and remittance challan number range and it seems ok.
    would request you to help me to workout this issue.
    Regards,
    Rahane D

    Hi,
    Please refer to this SAP note to find out the exact error in J1INCHLN
    SAP Note 1465529 - CONSULTING NOTE FOR J1INCHLN
    In addition to this please refer to the following link in case you find out that the posted documents have missing Business place updated..
    Re: Subsequent implentation of EWT (Challan and Certificate)
    Regards,
    SAPFICO

  • Tcode J1INCHLN ( WHT)- Business Place for document  could not be determined

    when i do Tcode J1INCHLN , the error message is comming Business Place for document  could not be determined.
    Though i have specified the Business Place/Section Code.
    Please advise

    Dear Tanuj Agarwal,
    Please update the Business place in the customisation in this location
    spro->Financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->South Korea->Business Places->Define Business Place.
    Use the same section code name as the business palce.
    Then you can run the J1INCHLN for that business place
    Please assign points
    Best Regards,

  • The Organizational Data could not be determined. Inform system admin

    Hello All,
    I am able approve PO from EBP, but getting this error 'The Organizational Data could not be determined. Inform system admin' when trying to appove PO from Universal Work List (portal) or when I try to open the work item via Busines Workplace (SAP GUI). Can anybody tell me if there is any config missing? or any suggestions to resolve this issue.
    Any kind of help appreciated and rewarded.
    Thanks,
    Shekar

    Hi Chandra,
    Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
    Regards,
    Ravi G

  • EM Jobs Service is down (fatal).  Reason - "Reason for delay could not be determined"

    Hi all -
    I'm having a problem with my em jobs service.  It's listed as down.  Severity is "Fatal".   For the incident creation DATE it has the following:
    "Reason for delay could not be established."
    Note that it's the DATE column where it ways that the reason could not be established.    Under "message" it has Dec 28, 2013 8:46:29 PM. 
    Target Name
    Target Type
    Severity
    Message
    Incident Creation Date
    Incident Last updated Date
    Escalation Level
    EM Jobs Service
    EM Service
    Dec 28, 2013 8:46:29 PM
    Reason for delay could not be established.
    Jan 27, 2014 7:48:44 PM
    None
    Does anyone have any clue as to why this is happening and/or how to fix it?
    Thanks,
    Tom

    Hi,
    Follow the below steps
    1. Click on Repository Database Target in Cloud Control
    2. Navigate to : Administration -> "Oracle Scheduler" -> Home -> click on "Oracle Scheduler" it will return, "Scheduler Jobs"
    3. Check that the scheduled jobs are running at their correct schedules.  Check if the "EM_JOBS_STEP_SCHED" job is disabled.
    4. Select "EM_JOBS_STEP_SCHED" and click on "Edit job Definition" ensure that the job status is "enabled". Then click apply.
    5. Check the "EM Jobs Service" status , it should now be shown as UP.
    Also
    1. Login to 12c Console, Targets --> All Targets --> EM Jobs Service
    2, click on Monitoring Configuration tab
    3. click on System Configuration
    In the Availability Definition screen, under Key Component column, check all the check boxes
    4. Similarly, in the System Configuration screen, under Key Component column, check all the check boxes
    Wait for 5 minutes and then check the status of the target again.
    Regards,
    Rahul

  • Shipping data could not be determined for the material

    hi all,
    while creating STOs for i get a message that shipping data for the material canoot be determined for the material. the plants are maintained as customers. the shipping tab in item detail in STO order is not appearing. the shipping point is getting dertmined for sales orders from the same plant and material. am also able to ceate STOs between other pair of plants.
    thnx in advance
    saurabh
    Message was edited by:
            saurabh diwakar

    Hi,
    Shipping point is determined by <b>"shipping conditions"</b> + <b>"loading group"</b> + "<b>plant"</b>.
    <b>Shipping conditions</b> are fetched from customer master / or if maintained in the sales doument type they are fetched from there.
    <b>Loading group</b> fetched from material master.
    <b>Plant</b> fetched from CMIR / CMR / MMR.
    You do the shipping point determination using the transaction code <b>"OVL2"</b> If <b>SC or LG or PLANT</b> are deviating from the entries in the customer or material master then also you will not get the shipping point.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • Business Place for document  could not be determined in Withholding Tax

    i have created business place in 6.0 version but when i m taking the reports for TDS remittances challans we have to give business place but its not showing business place can any one answer.

    Hi,
    might be while posting Business Place has not enterd.
    reverse the document and post properly.
    or update in table.
    i faced the same issue.
    SU*
    assigned point if its work.

  • Exchange rate EURX not calculate exchange rates between USD and GBP

    We have set ExRt as following:
    Exrt          Usage       Ref. crcy
    EURX     EMU      EUR
    we have "EMU" flag checked also.
    We are maintaining exchange rates (EURX) for EUR with all others currencies.
    We expected that, if we have a CoCode set in GBP and we post a document in USD, SAP will calculate GBP <->USD from exchange rates EURX(USD/EUR) and EURX(GBP/EUR). It seems to be incorrect because the system is ignoring EURX exchange rates and using "M" GBP-USD exchange rate and this was not expected by us.
    Could you please tell me if it is correct to expect SAP calculates USD-GBP Exchange rates from EURX(USD/GBP) Exrate or I am wrong and I need to maintain "M" exchange rates for USD-GBP.
    Thanks in advance

    Hi,
    Please check the following settings :
    Go to IMG --> General Settings ---> Currencies ---> Check Exchange Rate types
    Select the Exchange Rate Euro and check mark the EMU check box . Save it
    Rgds,
    Suresh

  • Exchange rate fields get failed when uploading data

    Hi,
    I have a problem when uploading purchasing data (2LIS_02_SCL) from R/3 to BW. Basically the exchange rate value is right in the PSA but NOT in the cube.
    I just wondering what did they do when transfering the exchange rate data from PSA to cube. I have already checked the transfer rules and update rules, but no logic in there. So the logic should be ONLY pass the value, but somehow different value coming up.
    Maybe you can have different think about this ?
    FYI, I have already transfered global settings and exchange rates from R/3 to the BW. Is there any settings that I missed ?
    Very appreciate of your help.
    Thanks a lot
    Martin Darmawi

    Hi Roberto,
    Thanks for your answer.
    I think it has aggregation behaviour.
    Do you know how I can avoid aggregation behaviour for a keyfigure ? Because I can't edit aggregation field and I tried to change the exception aggregation field with First Value, No Aggregation and Avarage value but it does not work.
    Please let me know what you think.
    Thanks and Appreciate for your help,
    -Martin Darmawi-

Maybe you are looking for