Exchange rate pop-up for facility assignment

Dear Expert ,
     Now I found something abnormal when I try to post the TR transaction with foreign currency (Different currency with Facility) and need to assign it to Facility by the information belows,
     - Create TR transaction with USD currency and assign it to Facility then the transaction pop-up exchange rate for entering manually  but when I create TR transaciton with another currency such as JPY , HKD the system not pop-up the screen for entering to me.
      Could u suggest the solution or point-check to me to clarify this problem.
Thank you very much.
Pongrapee K.

Hi
System only give exchange rate pop-up when your transaction currency is different from your facility currency.
if facility and transaction currency is same then there will be no pop-up but if both are different then system will give pop-up of exchange rate.Reason for this is that system will convert you transaction amount in facility  currency and then compare it with available amount.
Regards
Narinder Pal Verma
+91-9818882409

Similar Messages

  • Exchange Rate Type Specific for ICB

    Hi fiends,
    In our company, we're currently using exchange rate type USDX (it was defined in OBBS, where the exchange rate type "M" is assigned to "USDX" (which we're updating on a daily basis).
    However, for the ICB (intercompany business process) I don't wanto to use the exchange rate type USDX, I want to use the exchange rate type ICB, which we will maintain on a periodic basis.
    What customzing should I activate to enable the system to distinguish when to use the the ICB exchange rate type (for ICB PO's)?
    I don't can't default the exchange rate type in the document type level (OBA7), because we use the same document type for ICB and non-ICB PO's.
    Thanks in advance.
    Alex.

    Hi Alex,
    You should update the OB22 and assigned the parallel currencies with the right Exchange rate. Instead of assign USDX or M, you might choose another ExRteType for this inrco comapany.
    Regards
    Pedro

  • Exchange rate translation logic for FI and CO

    Dear FI gurus
    I have question about exchange rate setting.
    - Controlling area currency: USD
    - Object currency/Company code currency: JPY
    - Transaction currency : JPY
    - Inverted exchange rate indicator : deactivated.
    (So, exchange rate is maintained by each country's subsidiary)
    In this case, according to SAP's help,
    - Controlling area currency: Converted from Transacton currency(EUR) to Controlling area currency(USD)
    - Object currency: Converted from Controlling area currency(USD) to Transaction currency(JPY)
    This means that if transaction currency is JPY100, object currency is NOT JPY100, right?
    (Because cross rate reference is deactivated and JPY->USD and USD->JPY is different rate)
    On the other hand, in FI(OB22), I setup Group Currency which is USD.
    In FI, translation logic can be selected whether "From transaction currency" or "From first local currency".
    But still different logic from CO side.
    So, it seems GL and Controlling area has different translation logic.
    How normally global companies manage it?
    Yoshi

    Dear Yoshi-san,
    For a global company, e.g. COMPANY ABC (head office in the USA) has different legal entities in different countries (Japan, Singapore) where the local currencies are different. In my opinion below set up is normal.
    Controlling Area ABC
                    Assuming all companies (ABC, DEF, GHI) are assigned to controlling area ABC.
    Controlling area currency (for controlling area ABC) : USD
    COMPANY ABC (Head office)
             Company code currency : USD
             Object currency : USD
        2. COMPANY DEF (Japan entity)
            Company code currency : JPY
            Object currency : JPY
        3. COMPANY GHI (Singapore entity)
            Company code currency : SGD
            Object currency : SGD
    Let say for Japan entity, a document of JPY100 (transaction currency or document currency) has been posted. The amount in company code currency is JPY100; amount in object currency will be JPY100; amount in controlling area currency will be USD0.99. (maintain exchange rate table: 100 JPY = 0.99 USD).
    If another document of EUR100 (transaction currency or document currency) has been posted. Then the amount in company code currency is JPY 13,800 (maintain exchange rate table 1 EUR = 138 JPY; amount in object currency will be JPY 13,800; amount in controlling area currency will be USD136. (maintain exchange rate table: 1 EUR = 1.36 USD).
    As for the third document of USD100 (transaction currency or document currency) has been posted. Then the amount in company code currency is JPY 10,100 (maintain exchange rate table 1 USD = 101 JPY; amount in object currency will be JPY 10,100; amount in controlling area currency will also be USD100, no translation is required.
    Kind regards,
    John Chin

  • Exchange rate in GR for imports

    All SAP Gurus,
    When we make PO for imported material, we can define exchange rate.
    After that when go for GR (MIGO), system pick up which exchange rate (exchange rate maintained in PO or current exchange rate)?
    Regards,

    Hi,
    In PO if u tick indicator Besides Exchange rate - Fixed then GRN will be take place at that exchange rate.
    Otherwise GRN will be posted at the rate maintained in t-code OB08
    Rgds,
    Saurabh

  • How can i get updated exchange rate from website for my currency convertor

    i found a website but it provides this service in XML and i don't know how can i use this in my j2me application.
    anybody knew this ....thanks

    You do not have the original footage anywhere?
    If not your going to have to use Streamclip or another product to convert to DV then export out for the web.
    Getting it off DVD
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    Ready for the web
    http://danslagle.com/mac/iMovie/qt_plugins/3001.shtml

  • Exchange Rate Difference in PO with cost center assignment

    Hi All,
    In case of exchange rate difference in a PO with a cost center assignment the system Do not post the difference in the exchange rate difference account (maintained under transaction type - KDM - in T-code OBYC). However if the PO is a normal material PO it posts the exchange rate difference to the exchange rate difference account.
    I want the exchange rate difference to be posted to the exchange rate difference accout for PO's with cost center assigned as well.
    I have searched for SAP notes and found that note # 980402 & 1102481 provides a solution for this issue - but it seems both the notes are valid for 4.6 and 6 release only. We are on ECC 5.0
    I have also checked note # 1136145 for this and implemented in the system successfully without any luck.
    Can some one please help me with a solution for this issue.
    Thanks and regards,
    Ankur

    Even I have implemented this note in our 4.6C system for account assigned POs, but no luck. Please let me know if are successful.
    Thanks
    Neel

  • Exchange rate not reflecting in PO created thru bapi for foreign currency!

    hi friends,
    am creating PO thru BAPI_PO_CREATE1...in the input file, i have given currency as USD and Exchange rate as 0.5, but in the created PO, i am able to see only 1 as the exchange rate...i even tried changing it using BAPI_PO_CHANGE, but no luck..but in case of local currency, which is EUR, am able to translate from the file whatever the value as exchange rate of the PO...this problem only comes if it's a foreign currency..am i missing something? pl advice
    Regards,
    Muthu

    Hai,
    Try like this:
    If you are populating Header conditions you must divide it by 10 as following:
    wa_hdrcond-cond_value = wa_hdrcond-cond_value / 10.
    If you are populating Item level conditions you must follow as:
    IF wa_itmcond-currency IS INITIAL OR
         wa_itmcond-currency EQ '%'.
        wa_itmcond-cond_value = wa_itmcond-cond_value / 10.
      ENDIF. 
    This will solve your problem. In the BAPI, it multiplies exchange rate by 10 for the header conditions.
    Where as Item condition value(exchange rate) is multiplied by 10 when it satifies the above conditions.
    So we must follow the same criteria as we did above.

  • Exchange Rate Type For MIRO

    Hi, expert
    My customer has a specific requirement. For AP, use exchange rate type B, for AR use exchange rate type G. The easist way is to set in the document type  (Table T003), but this table is cross company code. Here only one company code need it.
    So my proposal are following:
    FI direct posting:
       AR and AP exchange rate are substituted by a user exit.  In the substitution, the field BKPF-KURSF should be release for substitution, change the table GB01
    SD invoice posting:
      Set Exchange rate type G in the customer master of sales area, then the AR is posted with exchange rate type G. The substitution in FI is not effective in SD invoice posting.
    MM LIV posting:
    During MIRO , the substitution in FI don't work here.  and other User Exit not work.
    Is there any other method to make sure the exchange rate type change to B in the MIRO?
    Thanks!

    Please check SAP Note : 518114

  • Utilizing different exchange rate type for same currency combination

    Hello Gurus,
    I wanted to get your opinion/experience in handling the following scenario.
    We have company codes in different countries operating using different local currencies. There is alternate exchange rate type  EURX defined for Exchange rate type M for many currency combinations due to business requirements. One country with local currency EUR is utilizing EURX SEK - EUR exchange rate combination.
    Other country with local currency HUF is making use of exchange rate type MNB as an alternate exchange rate. In one of its transaction, where VAT is being calculated on its foreign transaction, HUF company is trying to seek rate of MNB SEK- EUR where country currency is SEK and document currency is EUR.
    But since on the 'translation ratios for currency translation' table EURX being the alternate currency for that particular combination, even when we set MNB SEK EUR exchange rate, the system is obviously picks up EURX rate.
    Has anyone come across similar scenario where different countries trying to get different exchange rate types for the same combination of currency? and If so, how would that be possibly handled through config or using something custom?
    Thanks all for your replies in advance.
    Regards,
    Sagar K.

    Hi Sagar,
    In tcode OBBS, if Alt.exchange rate is used for any currency pair, then that rate is used ( EURX in this case).
    All countries in EMU region uses EURX ( which is mostly fixed after introduction of EUR).
    If the company is in different countries in Europe, then mostly EUR is used as Alt. exchange rate. which uses EUR as reference currency.
    Ther is no country specific settings in std. sap for a currency pair.
    Cheers,

  • Can I assign exchange rate when use MRKO?

    Dear all:
    I have met one question.
    When I use MRKO to settle consignment stock withdraw, how can I assign exchange rate I do really need?
    Thank you.

    Sorry, I am not  meant where to maintian exchange rate .
    I want to assign the exchange rate date  when Use MRKO.
    Ex: when I transfer  the consignment  stock  into our own stock(mvt. 201 K or 411 k) on 4/30 , and the vendor send their invocie on 5/6 .When I use MRKO , the exchange rate is reference to 5/6 , not 4/30 . I want to know where can I configure and let the MRKO's exchange rate date is the stock GI date .
    Thank you.

  • User-Exit to modify exchange rate type for Accouting document

    Hi,
    My requirement is as follows.
    I am creating an incoming invoices which in turn creates an accounting document.
    The document currency for the accouting document is different from the Company code currency. In such a case, the "Exchange rate type" provided in the customization of the "Accouting doc type" is picked up and the exchange rate is determined for the conversion.
    I need some user-exit/badi/bte where I can override default  "Exchange rate type" for my accouting document.
    Regards,
    Abhishek

    Provide the exchange rate in the BAPI to create the incoming invoice document.

  • Exchange rate difference in MIGO and MIRO

    Dear Experts,
    Our local currency is INR.
    We have created PO and MIGO on 31.03.2015 with exchange rate 62.5908 without tick on fixed exchange rate in PO. OB08  is  also same on 31.03.2015. But at the time of MIRO system showing error massage for configure KDM even if i put exchange rate manually (62.5908) in MIRO.
                        GR/IR  Dr         62.5908
                               To Vendor        NIL 
                        Total                  63.5908
    I have also made down payment to this in UDS
    Local Curr(INR)
    Doc. Curr (USD)
    Ex. Rate
    PO No.
           32,081,541.24
               505,002.42
                   63.52750
    5500200091
           93,721,425.00
           1,494,998.00
                   62.69000
    Please advice how can i debug exchange rate 63.5908. if i assign GL on KDM then system will debit this difference in that GL
    Thanks in advance. Your suggestions will be highly appreciated.
    Best Regards,

    Hi Monika
    Please also exchange how you have set up the treatment of exchange rate differences for your company code for LIV under the path:
    IMG>Materials Management>Logistics Invoice verification> Incoming Invoice>Configure how exchange rate differences are treated
    Check if you have N or X maintained here. If you have any of this config, you will need to maintain the GL Account in KDM as well
    Regards
    Sanil Bhandari

  • Residual items are created with the current exchange rate

    Hello,
    When a residual item is created due to a short payment for an invoice, the residual item is created with the exchange rate that is in effect on that day.  Is it possible to assign the exchange rate equal to the rate that existed on the original invoice.
    Thanks in advance for you ideas.
    Karla

    Hi,
    You can use transaction FB05 for doing the clearing there you would be able to input the exchange rate you need for clearing the AP/AR/GL items.
    But the exchange rate at the time of making/receiving the payment or at the time of clearing is what should be applied.
    Regards
    K.R

  • Wrong Exchange rate in PO

    Hi All
    While creating PO system automatically picking the exchange rate 44.17 (indirect quote) for Euro, which is maintained in OB08 under exchange rate type EURX. But in OB08 we have also maintained EUR exchange rate under exchange rate type "M" for current date i.e. 66.73.
    We want system to pick up exchange rate maintained under exchange rate type M & not maintained under exchange rate type EURX.
    While crating the PO system is picking up the EUR exchange rate maintained under EURX i.e. 44.17
    Is there any where we have to maintain OB08 so that system will pick up exchange rate maintained under exch. rate type M i.e. 66.73?
    Thanks
    Sonal

    Hi,
    Pls. find below the details,
    First you need to assign exchange rate for EUR vs INR in OB08 transaction.
    Pls. refere exchange rate type as M
    and maintain EUR to INR as well as INR to EUR in "M".
    Pls. don't check "Exchange rate fixed" in the P.O..
    Now, you can create the purcahse order and see.
    Hope, it will solve your problem.
    Pls. award points if found suitable.
    Regards
    Rifaie.M

  • Selling Exchange rate type is not picking while billing

    Hi,
    We have maintained Exchange rate type B for selling and the same was assigned in customer master as well as the RV document type. While raising sale order system is picking the B rate from OB08 table, but at the time of billing system is taking the M rate. Where do i set a control to pickup only B rate? Can anybody help me on this.
    govind.

    Hi,
    Ideally at the time of billing, exchange rate type is picked up from the document type (RV in your case). However if the rate is picked up for standard exchange rate type, check if there is user exit being called for exchange rate type.
    Thanks,
    Aman

Maybe you are looking for

  • How can i translate a pdf document in japanese language to english language

    how can i translate a pdf document in japanese language to english language

  • Problem editing hosts file in Snow Leopard

    I am having trouble editing my hosts file in Snow Leopard. Well, I can edit it fine, but the changes seem to give no effect whatsoever. My hosts file looks like so: # Host Database # localhost is used to configure the loopback interface # when the sy

  • SubContract Process

    Hi I Guid me about below Process. I have a Subcontract Vendor,I have to give a Component to Subcontract Vendor directly,With out issuing a material to him (Means with out 541). How can i do this in SAP? Thanks Sam

  • Text attachments converted to htm in email

    Hello SDNers, I've used SOFM text attachments several times before, but this time round the client is using htm as default mail format (4.7/620 system). The problem is that all attachments are converted to HTML documents, EVEN if I specify TXT. Doubl

  • CS6 hanging at measuring memory

    Greetings. We have set up a new lab here on campus with 11 machines running CS6 for our art department. Currently those machines are W7 32bit with an I5 processor and 4gb of memory. They are brand new machines with a fresh image and install of CS6. A