Exchange Rate Type For MIRO

Hi, expert
My customer has a specific requirement. For AP, use exchange rate type B, for AR use exchange rate type G. The easist way is to set in the document type  (Table T003), but this table is cross company code. Here only one company code need it.
So my proposal are following:
FI direct posting:
   AR and AP exchange rate are substituted by a user exit.  In the substitution, the field BKPF-KURSF should be release for substitution, change the table GB01
SD invoice posting:
  Set Exchange rate type G in the customer master of sales area, then the AR is posted with exchange rate type G. The substitution in FI is not effective in SD invoice posting.
MM LIV posting:
During MIRO , the substitution in FI don't work here.  and other User Exit not work.
Is there any other method to make sure the exchange rate type change to B in the MIRO?
Thanks!

Please check SAP Note : 518114

Similar Messages

  • Exchange rate type for version - error message GP541 during confirmation

    Hi FICO Experts,
    I bumped into a problem during confirmation in CO15. (I would like to get the SFG by mvt 101 and consume the raw material by 261).
    The error messase I get is:
    Maintain the exchange rate type for version 000 in 2009
    Message no. GP541
    Diagnosis
    You want to use plan version 000 with controlling area 1000 in fiscal year 2009.
    You have not specified an exchange rate type for this plan version for fiscal year 2009. Since the update of all currencies in 2009 is active in the control indicators of the controlling area, currency conversions are possible and sometimes also needed.
    It is therefore necessary to specify an exchange rate type for plan version 000 in year 2009.
    System Response
    The system will not accept your entry.
    Procedure
    1. Please maintain plan version 000 first using the function 'Change Plan Version', or
    2. correct your typing error.
    I'd like to ask you to please help to resolve this issue.
    Thanks,
    Csaba

    go to Maintain Version at SPRO-Controlling-General Controlling-Organization->Maintan Version and do what ever it says. Provide Exchange rate type P or M would resolve your issue

  • Different Exchange Rate Type for Vendors and Customers Invoices

    Dear Friends,
    We have configured different exchange rate types for Accounts Payable and Accounts Receivable thru T Code OB07. What are the additional Config steps required to ensure that the respective buying and selling rates will apply to Accounts Payables and Receivables. We do not want to stipulate the exchange rate types in Document Types as this special exchange rates are applicable only for one of the Company Codes.
    Would appreciate your help in this regard.
    Regards,

    Hi,
    Then you can use a different document type for those company codes and can default the exchange rate type there.
    OR,
    The alternative wya is to use the substitution in OBBH/ GGB1 for those company codes with exit programming.
    Regards,
    SDNer

  • Using Diffrent Exchange rate Type for Payroll

    Hi All experts,
    We wish to use a different exchange rate type for Payroll currency conversion. As we all know that the Payroll driver uses the currency coversion rate M and is hardcoded in the standard Programmes.
    Now please suggest me whether it is possible in any means to use different currency conversion rate for Payroll?
    Also we have explored the Global payroll, but the same has been not yet released for all customers, can I use it as it provides with the option of choosing exchange rate type on a particular date and have standard excahnge protection IT.
    Awaiting guidance from u all....
    Thanks in advance
    Regards
    learner

    Hi,
    No i want system to pick diffrent exchange rate so i want to change exchange rate type for 1st Local Currency.
    But that area is greyed out. Is there any system setting where i can maintain diffrent Exchange rate type for 1st Local Currency instead of "M". or is there any other way out that system will pick up diffrent exchange rate.
    Problem is that two entities are operating in different market having same local currency but conversion rate for Foreign currency will be diffrent e.g. Local Currency EUR Exchange rate between EUR -USD in France 1.20 and Exchange rate between EUR-USD in Germany 1.25.
    Is there any wayout to deal with such situation.
    Please suggest.
    Regards,
    Manish

  • Diffrent Exchange rate type for 1st Local Currency

    Hello,
    I have following problem:
    E.g.
    One company code in Germany having Local Currency as EUR and Another Company Code in France having Same Local Currency as EUR.
    If i am posting transaction say on 12/09/2008 in USD for both company code and Exchange rate in Two Countries are as follows:
    Germany  -EUR to USD -1.25 on -12/09/2008 EXRTTY: M
    France     -EUR to USD -1.50 on -12/09/2008 EXRTTY: M
    By default system picks up "M" exhchange Rate Type [EXRTTY]. And we cannot change exchange rate type for Currency "10" Local Currency.
    Please help me how take care of such situation.
    Regards,
    Manish

    Hi,
    No i want system to pick diffrent exchange rate so i want to change exchange rate type for 1st Local Currency.
    But that area is greyed out. Is there any system setting where i can maintain diffrent Exchange rate type for 1st Local Currency instead of "M". or is there any other way out that system will pick up diffrent exchange rate.
    Problem is that two entities are operating in different market having same local currency but conversion rate for Foreign currency will be diffrent e.g. Local Currency EUR Exchange rate between EUR -USD in France 1.20 and Exchange rate between EUR-USD in Germany 1.25.
    Is there any wayout to deal with such situation.
    Please suggest.
    Regards,
    Manish

  • Custom Exchange Rate Type for Purchase Order

    Hi
    Our Financial Team doesn't want to change the Exchange Rates on a daily basis, but for place purchase orders with our overseas vendors we need the daily spot rate loaded in the system. 
    Is there way to configure a different exchange Rate type ?  and use this Exchange Rate Type for Purchase Order to use instead of Default type "M"?
    Thanks...

    Found a soluntion ...
    I have coded userexit EXIT_SAPLMEKO_001 component LMEKO001, to fill in Exchange Rate type in the Communication Structure "e_komk-kurst".
    Update Exchange Rate Type "ZCUS" under SPRO and updated exchanges in TCURR table for this type.  Then, everything else works like a charm.

  • Utilizing different exchange rate type for same currency combination

    Hello Gurus,
    I wanted to get your opinion/experience in handling the following scenario.
    We have company codes in different countries operating using different local currencies. There is alternate exchange rate type  EURX defined for Exchange rate type M for many currency combinations due to business requirements. One country with local currency EUR is utilizing EURX SEK - EUR exchange rate combination.
    Other country with local currency HUF is making use of exchange rate type MNB as an alternate exchange rate. In one of its transaction, where VAT is being calculated on its foreign transaction, HUF company is trying to seek rate of MNB SEK- EUR where country currency is SEK and document currency is EUR.
    But since on the 'translation ratios for currency translation' table EURX being the alternate currency for that particular combination, even when we set MNB SEK EUR exchange rate, the system is obviously picks up EURX rate.
    Has anyone come across similar scenario where different countries trying to get different exchange rate types for the same combination of currency? and If so, how would that be possibly handled through config or using something custom?
    Thanks all for your replies in advance.
    Regards,
    Sagar K.

    Hi Sagar,
    In tcode OBBS, if Alt.exchange rate is used for any currency pair, then that rate is used ( EURX in this case).
    All countries in EMU region uses EURX ( which is mostly fixed after introduction of EUR).
    If the company is in different countries in Europe, then mostly EUR is used as Alt. exchange rate. which uses EUR as reference currency.
    Ther is no country specific settings in std. sap for a currency pair.
    Cheers,

  • Exchange rate type for posting to Controlling

    Hi
    We are using Currency type as 20 in Controlling Area. We have several Company Codes and each have different currency.
    While posting entry from FI to CO , the system always take exchange rate type as M.
    Please let me know whether we can assign some other exchange rate type for actual transactions.
    Thanks
    Gaurav Jain

    Hi
    Goto TCode OBA7 and select your document type (usually SA ) and enter in Field "Ex.rate type for forgn crncy docs" your required exchange type.
    Cheers
    Srinivas

  • Different exchange rate type for PO

    Hi,
    I have a requirement, where I need to take a different exchange rate type for one particular PO document type.
    I have already maintained exchange rate type Z in Tcurr table.
    I should enable system to pick this exchange rate for PO wich are created from a PO document type
    Same exchange rate should be picked for GR and IR as well.
    If I overwrite the PO exchange rate in PO header, GR and IR are picked default M exchange rate type.
    If I maintain Z exchange rate for doc type WE and RE, the same would taken for all POs GR/IR.
    I should make it available only for a PO document type and relevent GR/IRs.
    Can you please advise how we can achieve this.
    Your help in this regard is much appreciated.
    Thanks,

    Any Advise.

  • Needs Diff. Exchange rates type for sales trans and Purc Trans

    Hi Gurus,
    My requirement is that for a same foreign currency i need to pick two different rates one for purchase related activites and another for sales related activites. is that possible in standard SAP.
    Example of my scenario:
    My company code currency is INR.
    on 10.09.2007 if i make purchase of goods in USD system picks the rate i maintain for usd from the exchange rate type "M".
    On the same day if i make any sales in USD system is picking it again from the same exchange rate type "M', but i want to pick it from exchange rate type "G".
    Kindly Advice me what to be done.
    Thanks and Regards
    Karthik

    Hi,
    For SD related transactions, you can maintain the exchange rate in Customer Master - Sales Area Data. In Sales Tab you can maintain "Exchange Rate Type" for transactions related to that Customer.
    Probably, for MM you can continue with the standard M.
    Thanks
    Murali.

  • User-Exit to modify exchange rate type for Accouting document

    Hi,
    My requirement is as follows.
    I am creating an incoming invoices which in turn creates an accounting document.
    The document currency for the accouting document is different from the Company code currency. In such a case, the "Exchange rate type" provided in the customization of the "Accouting doc type" is picked up and the exchange rate is determined for the conversion.
    I need some user-exit/badi/bte where I can override default  "Exchange rate type" for my accouting document.
    Regards,
    Abhishek

    Provide the exchange rate in the BAPI to create the incoming invoice document.

  • How to change exchange rate type for specific pricing condition type

    Hello every one,
    I have a requirement for billing ie VF01.
    currently  all the exchange rate are being calculated with exchange rate type 'M' by default.
    but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
    Please any body can help me with the exit and code which i can use.
    I have checked exits SDVFX008.
    but how to change exchange rate with type 'E' only for two conditions.
    as changing exchange rate at document header will change exchange rate for all condition type.

    You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
    Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
    Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
    Link to refer for selective runtime analysis - Runtime Analysis for VOFM
    Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally  we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

  • Exchange rate type for vendor invoice

    Hi,
    How to know which exchange rate type is being considered during postings vendor invoice in foreign currency.
    Company code currency is EUR and I am posting an invoice in USD.
    I checked OB08 and exchange rate with type M does not match with one calculated in FB60.
    I checked document type KR (OBA7) -exchange rate type 'M' is mentioned.
    I checked additional currencies for company code (OB22) - all currencies use exchange rate type 'M'
    So how to check which exchange rate type is being used by system.
    Thanks.

    Hi
    For posting vendor invoice which doc type are you using. If other than KR check that one also in oba7. And for OB08 you have to check for Ex rate M from EUR to USD what is the curr rate.
    Regards
    Mani.S
    Edited by: smanimba1 on Nov 28, 2011 5:49 AM

  • New G/L using an other Exchange Rate Type for Local ledger

    In new G/L ledger we want to use for a Local ledger a different Exchange Rate Type then the standard M.  This is for local reporting to the goverment
    Is this possible and yes where I can make this setting?

    Hi Paul Annotee
    In T.Code: OB22 you can maintain another parallel currency say HARD Currency (40), and make this as identical to your local reporting currency... for this new currency you can maintain a different Exchange Rate Type
    Regards

  • Use an alternative Exchange Rate Type for activity actual price

    Dear All,
    I try to use an alternative Exchange Rate (not M)  in controlling area version "0", I need to use a custom currency exchange rate like in planned price (here I create a new planned version with exchange rate "N").
    I find same notes and it seems that standard Sap use only Exchange Rate "M" for actual price but I notice that for example in transaction KB21N (activity allocation) system shows in additional info exchange rate "N" (input in version "0").
    Is not possibile to use other Exchange Rate for actual price, activity allocation, for confirmed activity in production order?
    Controlling area has currency type 30 (group currency EUR), this company has MXN.
    Thanks in advance for your support
    Daria

    In KB21N (activity allocation), system uses the exchange rate type you have maintained in controlling area version plan settings (transaction OKEQN). Activity allocation during the month always happen at the planned price maintained in KP26 at the exchange rate specified in plan version. During actual price calculation and revaluation during month end, it calculates actual activity price at (uses M rate to convert to controlling area currency) and revaluates consumption.
    I think you cannot use other exchange rate, see the coding in include LKSPIF00 that is used in KSII where currency type is hard coded to M, if this is plan price calculation it's picking tka07-kurst.
    Best Regards,
    Venkata Ganesh Perumalla

Maybe you are looking for