Exchange rate type not visible
I want to maintain my own currency convertion method in BW ,we can do this in T-code RSCUR
I have maintaned my Exchange rate type in the table TCURR and then use this as the Exchange rate type in T-code RSCUR but when I press F4 ifor Exchange rate type in RSCUR I am unable to see my value
Pls help me out
priya
Dear Maya,
I guess this is because exchange rate types are stored in a separate table TCURV. In TCURR you just have exchange rates.
Could you please check if your exchange rate type is stored in this table as intended?
Greetings,
Stefan
Similar Messages
-
Mass update exchange rate type (not rate) in open sales orders
Hi all,
Our requirement is to update the exchange rate type at sales order header (VBAK-KURST) for all open sales orders with a new type created. (Z001). This field does not appear in MASS transaction for sales orders despite being present in the structure MASSSDHEAD.
This field cannot be located even in VA02 transaction (I am not sure if standard SAP masks or shows this field at header; I also can't find any transaction variants assigned).
Can anyone suggest how this field can be updated for sales orders either individually or in mass mode.
Regards,
KC
SAP SDYou are correct in indicating that Exchange rate type field is not seen in Header data of sales order. I checked screen layouts for various screens for sales order data and this field is not suppressed. The only reason could be that this field is not used in sales order screens
If you are interested, you could also check in the following way
1. Go to SE11, enter database table as VBAK
2. Once inside data dictionary table, click where used list button, select programs and screens and execute
3. click continue (don't select background)
4. now you would have list of programs and screens, this table is used
5. now start another session and go to transaction SE51
6. indicate program name as SAPMV45A and screen numbers as listed in step 4. you can check all screen numbers to see whether Exchange rate type field is listed in sales order layout.
7. Of particular interest would be screen number 4311 as this contains Financial accounting data & 4303 Billing data
8. you can check screen layout for screen 4311 & 4303. you would see Exchange rate type field is not indicated.
9. in case you could find this field in any screen, you could ask your ABAP consultant to add this field in the layout screen.
Hope this answers your question -
Exchange Rate Type not working during plan assessment in T Code KSUB
Hello Experts
We had different exchange rate types created for different plan versions. We had Exchange Rate Type Z1 for Plan Version 01.
We had maintained the same in Planning settings for the fiscal year 2011.
We had created a new plan assessment cycle with version 1.
Now when we execute assessment cycle it is not using the exchange rate from 01/01/2011. Instead it is selecting the rate from 01/01/2010.
Is there something wrong when we copied fiscal year 2011 from 2010 for version 01.
Request your inputs and help on this.
Thanks
Satya AlapatiHi Ajay
Thanks for the information.
We had not maintained the value date for any of our versions since we keep changing the rates for every period and wish to have the system pick the latest rate for the period.
It has been the case in earlier years also.
Thanks
Satya -
Exchange rate type not defined for country
Hi All,
I have noticed an error message during testing of postings using tax codes. The error message nbr is FF802 (Exchange rate type is not defined for country XX). When we are testing postings on accounts for which tax code is ignored (not relevant) it is ok. Could you please let me know where exactly we have settings and how it is related to the tax codes ? I have never seen that connection previously.
Thanks,
Points will be rewarded afterwards.
TomaszHi Tomasz,
The exchange rate types are defined at country level in General Settings and the company codes with that country can access that. Normally the exchange rate types are defined as M, P, B and G. M is for average rate and is used in FI, while P is for planning in CO.
Regd
Bharat -
Alternate Exchange Rate Type Not Picked while converting from Document Currency to Group Currency
Hello Gurus,
We have setup an alternate Exchange Rate type MNB for rate M for the postings happening in Hungary. Local currency is HUF. Group currency is USD.
If the document currency is, lets say, EUR, latest MNB rate is correctly picked up (EUR to HUF) and postings are correctly converted into local currency (HUF).
Although, for the same document, when a group currency is being calculated (EUR to USD), exchange rate type M is being picked up. Same happens if document currency is HUF. Even then, the conversion is based on exchange rate type M.
Is this a normal SAP behavior? How to prevent/correct this? This is also throwing off balances when we check in FAGLB03 or BSEG values in local and group currencies. In OB22, we have local currency1 and local currency 2 setup with exchange rate type M and we may not want to make any changes there as it is setup at global level.
Do we need to run any valuations after the fact? if so, how?
Thank you for your inputs in advance.
Regards,
SagarHi,
You mentioned that "in OB22, we have local currency1 and local currency 2 setup with exchange rate type M". Then, I'm wondering how MNB is picked up for the first local curr. conversion to HUF? It should be 'M' instead. There must be some settings in your instance for such behavior. Can you check that?
Actually, Group Curr. conversion happens with the rate defined for 2nd Loc.Curr.in OB22 which is 'M' in your case. Therefore, all the transactions are converted with M instead of MNB.
Since you can't change OB22 per global co.policy, the exch.rate defined in OBA7 will overrule OB22. However, you've to make sure it's set up for all doc.types which are affected and posted in different curr. than HUF.
As a workaround, another thought would be to maintain the same conversion rate for both exch.rate types MNB & M, for eg. HUF > USD rate is the same both exch.rate type MNB & M. This way, you ensure all transactions are posted with correct exch.rate irrespective of whatever rate type is used.
From business, & global org. perspective, I'm sure they are sending the 'M' exch.rates to all their sister concerns monthly, so they would like to consolidate results as per standard rate in their system. Then, why ,as a local company, would you like to fiddle with standard process? It's a management decision, please run them through again before going ahead.
Thanks,
Nirav -
ERROR in MIRO : An exchange rate type is not defined for country IN
Experts:
When I try to enter the invoice received from the vendor, I am getting the following message.
An exchange rate type is not defined for country IN
Message no. FF802
Can anyone provide me a solution for this?
Thanks,
VijaiThis is the explanation given in note 974619 for the above error message
Summary
Symptom
When you post an FI document, the system issues error message FF 801 or FF 802.
Other terms
Plants abroad, FF 801, FF802
Reason and Prerequisites
You use the 'Plants abroad' function.
See Note 882132 for more information about this.
Solution
If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
- Country currency (Field WAERS)
- Exchange rate type (Field KURST)
- Net discount base (Field XSKFN)
- Net tax base (Field XMWSN)
You must maintain the fields 'Country currency' and 'Exchange rate type'.
Otherwise, the system issues error message FF 801 or FF 802.
thanks
G. Lakshmipathi -
Exchange rate type M not picked in FB60 foreign currency entry
Hi
My local currency is USD. I have defined exchange rate for ' USD and EUR ' for exchange type M and type EURX.
In FB60, system picks the exchange rate defined for exc. type EURX, but I want it to pick exch. type M.
Also i have set exch type M in docu type KR. Still it does not pick exc type M.
Pl advise
Thanks
kamalaI am thinking that most likely you have specified EURX as Alt. ERT (alternate exchange rate type) for exchange rate type M for the currency pair USD:EUR in IMG node 'Define Translation Ratios for Currency Translation" (T Code OBBS). Remove it and retest FB60; it should pick the M rate.
-
Exchange rate type P not getting picked up while executing KSUB-Plan Assess
Hi,
We have Exchange rate type "P" maintained in SPRO in Maintain versions for the Fiscal Year 2010, but even then when I execute KSUB, it posts with Exchange rate type M.
Has anyone faced this issue? We want it to pick up P and not M.
Regards,
SAPFICOHi, set it here IMG-Controlling-Cost Center Accounting-Planning-Basic Settings for Planning-Define versions-Maintain Settings of Version in Controlling Area then Setting for each f. year , double click on current f.year
-
Selling Exchange rate type is not picking while billing
Hi,
We have maintained Exchange rate type B for selling and the same was assigned in customer master as well as the RV document type. While raising sale order system is picking the B rate from OB08 table, but at the time of billing system is taking the M rate. Where do i set a control to pickup only B rate? Can anybody help me on this.
govind.Hi,
Ideally at the time of billing, exchange rate type is picked up from the document type (RV in your case). However if the rate is picked up for standard exchange rate type, check if there is user exit being called for exchange rate type.
Thanks,
Aman -
Currency Conversion type not visible in the query
Hi ,
I created one currency type conversion Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visibleHi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query, select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore -
Different Exchange rate type is picked while creating PO
Hi All,
We are maintaining daily exchange rates under exchange rate type "M" for currency GBP to INR. We have also maintained exchange rate type "ZCIG" but we are not maintaining daily exchange rates under this exchange rate type.
Still system is promting us to maintain the exchange rate under exchange rate type ZCIG instead of "M" while creating Purchase order. Becoz of this error i could not save the PO.
Please guide me on this issue.
Thanks
SonalHello,
Could you please let me know how you have solved this problem.
I want a particular exchange rates for a particular vendor posting.
Thanks,
Srini -
How to change exchange rate type for specific pricing condition type
Hello every one,
I have a requirement for billing ie VF01.
currently all the exchange rate are being calculated with exchange rate type 'M' by default.
but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
Please any body can help me with the exit and code which i can use.
I have checked exits SDVFX008.
but how to change exchange rate with type 'E' only for two conditions.
as changing exchange rate at document header will change exchange rate for all condition type.You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
Link to refer for selective runtime analysis - Runtime Analysis for VOFM
Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure. -
Hello all,
While releasing the billing document to accounting, getting the error:
'An exchange rate type is not defined for country US'.
In customer master, have maintained Exchange rate as 'M'.
where do we maintain the exchange rate type for country.
Thanks
Gauravjit.HI Gauravjit,
Try this:
SPRO-F5- General Settings-Currencies-Define Translation ratos for currency translaction
Reward if it helps
regards
Srini -
Using an Exchange Rate Type other than 'M' in a Purchase Order
I use several exchange rate types in SAP for various currency positions, specificially with pricing.
As a result, when I create a Purchase Order I want to use a different Exchange Rate Type, instead of the standard 'M'. I have seen the rates can be placed directly in the Purchase Order, but I would like the system to look up the required rate using a specific exchange rate type.
Can anyone provide any suggestions or guidance based on prior experiences ?
thanks
gino ruggieroDear Gino Ruggiero,
The MM functionality always uses the "M" rate.
Not able to release Purchase doc.
Regards,
Naveen. -
HOw to see currency pairs in Exchange rate type
Hi,
Can anyone tell me how to see currency pairs in an exchange rate type?
ThanksHi,
I am not sure this is a right solution. But I have some inputs on your requirements:
1. For traveller cheques you may create a new payment method and do the required configuration for automatic payment program. Don't generate any payment medium while running APP.
2. For currency notes (cash payment) I am not sure how it works. But probably it is possible by creating an account (account ID) for a particular house bank and use that (house bank & account id) for making payment.
Per my knowledge we have never used payment method cash (currency notes) in APP. But logically it would work by create a new payment method and doing the required config for APP.
Please update if you found a better way to do this.
thanks & regards,
Kumar
Maybe you are looking for
-
2 people sent e-mails to me today and I did not receive them. They both were replies to my e-mail (both different). I am running 10.7.5. I searched everywhere and nothing. Not on iCloud either. This happened a few years ago and never noticed it a
-
I have no idea what to do. I stick with CS5 because it does what I need and does not lock me into a financial arrangement over which I have do not have control. My software is registered. I have used and updated it without problems since I bought it
-
My internal speakers are not working, but my computers says they are
I get no sound with or without headphones it. I have gone into settings and made sure that I have selected internal speakers as the output device, and that they are not muted. Everything in the settings indicates that the sound is working fine, but
-
Hi, I am installed AIA FP 2.2.1 so BSR is automatically installed with it. Afterwards i installed OSR 10.1.3.1. As per the AIA docs i have changed bsrConfig.properties to point to OSR registry. registry.url=http://myAPPServer/registry I was to publis
-
Multiple BW Reports in one crystal report
Hi All, I'm very new to crystal reports. My next project is on Crystal reports. I have a bw web report with 6 repots included in the web report. Is it possible to inlcude 6 reports in a crystal report........i had seen the subreport option in crystal