Exchange rate window pumps up when trying to generating customer receivables aging

Hey guys, thanks for your help for last two issues. I learned a lot.
I just got another wired issue. This time when I tried to run customer receivables aging, the exchange rates and indexes window keeps pumping up(as shown in attachment). Has anyone of you encountered this before? How can I fixed this?
So far this only happens when I tried to access customer receivables aging. I didn't have any problem to access other features and invoices.

Thank you so much Jun. Actually I found the communication string you sent me last week.
Problem solved! Thanks for your help

Similar Messages

I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

Keep getting error 7 (windows error 1114) when trying to open i Tunes. If i follow given advice to uninstall i tunes / reinstall - will I lose all my library/purchases etc. As u can see i am preety computer illiterate - but i got this far. Advice please!

keep getting error7 ( windows error 1114) when trying to open i tunes. If i uninstall/reinstall will i lose my library/purchases etc. Sorry not very computer literate so easy instructions appreciated.

See Troubleshooting issues with iTunes for Windows updates. Your library should be safe, but you ought to back it up anyway.
tt2

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

Error when trying to generate a report using BEX Quesry in Crystal Reoprts

HI Experts,
As per the SAP NOTE we did FP 2.6 Unicode Transports and then SP3 transports. Transports are imported with min Errors.
Now *when am trying to generate a report using BEX Quesry in Crystal Reoprts* am getting error
"Database Connector Error: BAPI Error #:0
Error occurred when starting the parser: timeout during allocate /CPIC-CALL: 'ThSAPCMRCV' "
*When trying to Generate using OLAP CUBE Report Wizard. AM getting Error*
" READING OLAP META DATA FAILED."
Thanks,
Bharath

This is not really the correct forum to be posting Reports issues. However, if I were to guess, your issue is likely related to the known issues related to installing FMw11R1 on machines which had IPv6 enabled. In most cases, disabling IPv6 would correct the problem, however some issues were not resolved even after disabling IPv6 post-install. I would recommend patching to WLS 10.3.6 and FMw 11.1.1.6 as these versions include fixes for all of those issues as far as I recall.
Consider referring to this MyOracleSupport document if you have access:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

Got error when trying to generate Java proxy jar file for webservice

Hi,
I am having a warning message when trying to generate java proxy jar file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United Airlines
got an enterprise weblogic license deal with BEA, any help will be highly appreciated.
Thanks!!!
Naichen
[ModifyPNRWSContract.wsdl]

Hi Naichen,
I was able to successfully run both the autotype and clientgen Ant task, on the
WSDL you provided. The code behind those Ant tasks are pretty much what the WebLogic
Web Services test page run. Are you using WLS 8.1 SP2? If not, you might want
to try with that version.
Regards,
Mike Wooten
"Naichen Liu" <[email protected]> wrote:
>
>
>
Hi,
I am having a warning message when trying to generate java proxy jar
file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this
service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following
exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United
Airlines
got an enterprise weblogic license deal with BEA, any help will be highly
appreciated.
Thanks!!!
Naichen

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
anyone have any idea

Hi
Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
Daryl

NI Configurator 4.1 - Crash when trying to create custom tab

For some reason I have problems when trying to create custom tab in NI Configurator 4.1.
Every time the result is same: Error - NIFCONF_ERROR_APPLICATION_EXCEPTION - Parameter is incorrect...
Any help in this?
br. Jouko

ANNOUNCEMENT:
We have just released a new version 4.1.1, which has fixed this issue.
Get download and update through the link below:
http://joule.ni.com/nidu/cds/view/p/id/3320/lang/en
Thanks.
Chris

Exchange rate fields get failed when uploading data

Hi,
I have a problem when uploading purchasing data (2LIS_02_SCL) from R/3 to BW. Basically the exchange rate value is right in the PSA but NOT in the cube.
I just wondering what did they do when transfering the exchange rate data from PSA to cube. I have already checked the transfer rules and update rules, but no logic in there. So the logic should be ONLY pass the value, but somehow different value coming up.
Maybe you can have different think about this ?
FYI, I have already transfered global settings and exchange rates from R/3 to the BW. Is there any settings that I missed ?
Very appreciate of your help.
Thanks a lot
Martin Darmawi

Hi Roberto,
Thanks for your answer.
I think it has aggregation behaviour.
Do you know how I can avoid aggregation behaviour for a keyfigure ? Because I can't edit aggregation field and I tried to change the exception aggregation field with First Value, No Aggregation and Avarage value but it does not work.
Please let me know what you think.
Thanks and Appreciate for your help,
-Martin Darmawi-

Windows 8 crashes when trying to connect to a Remote Desktop or a VPN

Hello,
When trying to perform a connection to a remote desktop or a VPN the application crashes (either MSTSC.exe or Explorer.exe). I've noticed this happens when credentials are about to be asked (same happens when trying to access a restricted folder on a network
machine).
Useful PC specs:
- i7 3770k, 16GB Ram, GTX460 (2x-SLI) (Intel HD 4000 on board)
> All latest drivers and Windows updates installed.
> Ran Memory Diagnostic. No errors.
Event Log:
Faulting application name: mstsc.exe, version: 6.2.9200.16384, time stamp: 0x50108ae1
Faulting module name: DUI70.dll, version: 6.2.9200.16384, time stamp: 0x50108e6a
Exception code: 0xc0000005
Fault offset: 0x00000000000027ee
Faulting process ID: 0x994
Faulting application start time: 0x01cdf16f9b46e882
Faulting application path: C:\WINDOWS\system32\mstsc.exe
Faulting module path: C:\WINDOWS\system32\DUI70.dll
Report ID: dadcc27c-5d62-11e2-bf13-bc5ff4390e7a
Faulting package full name:
Faulting package-relative application ID:
WinDbg: (RDP Crash dump with procdump)
Loading unloaded module list
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(994.1118): Access violation - code c0000005 (first/second chance not available)
dui70!DirectUI::Element::_SetValue+0xe:
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
0:000> .ecxr
rax=000007fec5cbbd80 rbx=000000989f3afa28 rcx=0000000000000000
rdx=000007fec5cbbd80 rsi=00000000fffffffd rdi=00000098a3e805b0
rip=000007fec5be27ee rsp=000000989f23a8b0 rbp=0000000000000000
r8=0000000000000001 r9=000000989f3afa28 r10=0000000000000000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=00000098a1d29401
iopl=0 nv up ei pl nz na pe nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010200
dui70!DirectUI::Element::_SetValue+0xe:
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
0:000> !analyze -v
* Exception Analysis *
GetPageUrlData failed, server returned HTTP status 404
URL requested: http://watson.microsoft.com/StageOne/mstsc_exe/6_2_9200_16384/50108ae1/dui70_dll/6_2_9200_16384/50108e6a/c0000005/000027ee.htm?Retriage=1
FAULTING_IP:
dui70!DirectUI::Element::_SetValue+e
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx]
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 000007fec5be27ee (dui70!DirectUI::Element::_SetValue+0x000000000000000e)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
DEFAULT_BUCKET_ID: NULL_POINTER_READ
PROCESS_NAME: mstsc.exe
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 0000000000000000
READ_ADDRESS: 0000000000000000
FOLLOWUP_IP:
dui70!DirectUI::Element::_SetValue+e
000007fe`c5be27ee 488b01 mov rax,qword ptr [rcx]
MOD_LIST: <ANALYSIS/>
NTGLOBALFLAG: 0
APPLICATION_VERIFIER_FLAGS: 0
FAULTING_THREAD: 0000000000001118
PRIMARY_PROBLEM_CLASS: NULL_POINTER_READ
BUGCHECK_STR: APPLICATION_FAULT_NULL_POINTER_READ
LAST_CONTROL_TRANSFER: from 000007fec5be7db8 to 000007fec5be27ee
STACK_TEXT:
00000098`9f23a8b0 000007fe`c5be7db8 : 00000098`9f23a950 00000098`00000004 00000098`9f23a954 00000098`9f3afa28 : dui70!DirectUI::Element::_SetValue+0xe
00000098`9f23a930 000007fe`b5378a73 : 00000098`a3f11208 00000098`9f23aa70 000007fe`b5418c58 000007fe`c4dc20f5 : dui70!DirectUI::Element::SetLayoutPos+0x98
00000098`9f23a970 000007fe`b53a5f7e : 00000098`a3f154d0 000007fe`b533bd54 00000098`a3ea80e0 00000000`00000000 : authui!UserList::_OnEnumerationSyncReply+0x689
00000098`9f23af80 000007fe`b5332670 : 00000098`a3f111f0 000007fe`b53212d1 00000098`a3f153a0 00000000`00000001 : authui!CCredDialog::UIJobEvent+0x15e
00000098`9f23afc0 000007fe`b533cf1b : 00000000`00000000 00000000`00000000 00000000`00000000 000007fe`cae3545f : authui!CEnumerationSyncReplyJob::DeferredExecute+0x20
00000098`9f23b000 000007fe`b533cfbc : 00000098`a3f111f0 00000000`00000001 00000000`00000000 00000098`0000029e : authui!CDeferredUIThreadJob::Do+0x37
00000098`9f23b030 000007fe`b53a7f42 : 00000098`a1d29350 00000000`000e0602 00000000`00000002 00000000`000e0602 : authui!CCredentialJobQueue::_ProcessJobs+0x69
00000098`9f23b070 000007fe`b53a7e76 : 00000000`00000000 00000000`00000000 00000000`00008003 00000000`00000000 : authui!CCredDialog::DialogProc+0xa2
00000098`9f23b0d0 000007fe`c86ab3b9 : 00000000`00000001 00000098`9f23b241 00000000`00008003 00000000`00000000 : authui!CCredDialog::s_DialogProc+0x66
00000098`9f23b100 000007fe`c86ab108 : 00000098`9f9522d0 00000000`00000000 00000000`00008003 00000000`00000000 : user32!UserCallDlgProcCheckWow+0x135
00000098`9f23b1d0 000007fe`c86ab02e : 00000000`00000000 00000000`000e0602 00000000`00008003 000007fe`c4dc120b : user32!DefDlgProcWorker+0xb8
00000098`9f23b2a0 000007fe`c869171e : 00000000`00000001 00000000`00000000 00000000`00000000 00000000`00000000 : user32!DefDlgProcW+0x56
00000098`9f23b2e0 000007fe`c86914d7 : 00000098`9f9522d0 00000098`9f23b4e0 000007f7`f30de800 000007fe`cae31b95 : user32!UserCallWinProcCheckWow+0x13a
00000098`9f23b3a0 000007fe`c86be067 : 00000098`9f9522d0 00000098`9f9522d0 00000098`9f9522d0 00000000`00000001 : user32!DispatchMessageWorker+0x1a7
00000098`9f23b420 000007fe`c86bc641 : 00000098`9f9522d0 00000098`9f9522d0 00000000`00000000 00000000`0000c000 : user32!IsDialogMessageW+0x242
00000098`9f23b4b0 000007fe`c86bb8a3 : 00000000`00000000 00000000`000909fc 000007fe`b53a7e10 00000098`9f3a6cd0 : user32!DialogBox2+0xfc
00000098`9f23b540 000007fe`c86bb936 : 000007fe`b5320000 00000000`000909fc 000007fe`b53a7e10 000007fe`b53a7df8 : user32!InternalDialogBox+0x113
00000098`9f23b5a0 000007fe`c86bbc1b : 00000000`00000000 000007fe`b5320000 00000098`9f3a6cd0 00000098`9f3a6cd0 : user32!DialogBoxIndirectParamAorW+0x56
00000098`9f23b5e0 000007fe`b53a7c91 : 00000000`00000000 00000000`00000000 00000098`9f3a6cd0 00000098`9f3a6cd0 : user32!DialogBoxIndirectParamW+0x1b
00000098`9f23b620 000007fe`b539d0d0 : 00000098`a1d29350 00000000`00000000 00000098`9f3ec310 000007fe`b7d77987 : authui!CCredDialog::Dialog+0x151
00000098`9f23b670 000007fe`b7d6d268 : 10458c33`00000029 00000098`9f23b800 00000098`9f3ebac0 000007fe`b7d6d370 : authui!CCredUI::CredUIPromptForWindowsCredentialsW+0x1dc
00000098`9f23b700 000007fe`b7d6d503 : 00000098`00000003 00000000`00000000 00000098`9f23ba10 00000098`9f3ebac0 : credui!CredUIPromptForWindowsCredentialsWorker+0x310
00000098`9f23b850 000007fe`ac10c4fd : 00000098`9f3ebac0 00000098`9f23baa0 00000098`9f23ba10 00000098`9f23ba28 : credui!CredUIPromptForWindowsCredentialsW+0x17b
00000098`9f23b8f0 000007fe`ac0a0a85 : 00000000`00000000 00000098`00000000 00000000`00000000 00000000`00000000 : mstscax!CTscCredentialsQueryUi::PromptForCredentialsNew+0x159
00000098`9f23b9c0 000007fe`ac09e8e8 : 00000098`9f362f38 00000000`00000000 00000000`00000000 00000098`a0fed860 : mstscax!CTscCredsAssistant::PromptForTsCredentials+0x4e5
00000098`9f23d050 000007fe`ac0a13f7 : 00000098`9f351050 00000000`00000000 00000000`00000000 00000098`a0f24d50 : mstscax!CTscCredsAssistant::AcquireTsCredentials+0x8f4
00000098`9f23d770 000007fe`ac0716fb : 00000098`a0f24d50 00000098`a0f24d50 00000000`00000000 00000000`00000000 : mstscax!CTscCredsAssistant::OnSecurityLayerNegotiationComplete+0x1af
00000098`9f23e000 000007fe`ac179428 : 00000098`00000002 00000098`a0f5fee0 00000098`a0f5fee0 00000000`00000001 : mstscax!CUI::OnSecurityLayerNegotiationComplete+0x11f
00000098`9f23e060 000007fe`ac179594 : 00000098`a0f1c540 00000000`00000000 00000000`00000000 00000000`00000000 : mstscax!CTSThread::RunQueueEvent+0x104
00000098`9f23e0b0 000007fe`ac17baf2 : 00000098`a0f1c540 000007fe`c8691742 00000098`a0f1bf30 00000000`00000000 : mstscax!CTSThread::RunAllQueueEvents+0xcc
00000098`9f23e110 000007fe`ac17bb28 : 00000098`a0f1bf30 00000000`00000000 00000000`00000000 00000000`00000000 : mstscax!CTSThread::OnNotifyThreadEventQueue+0xa6
00000098`9f23e150 000007fe`abefb451 : 00000000`00000000 00000000`00000000 000061f5`6df98991 ffffffff`ffffffff : mstscax!CTSThread::OnNotifyThreadMessage+0x20
00000098`9f23e180 000007fe`c869171e : 000007fe`c8691742 00000000`00000000 00000000`00035090 00000098`9f919f70 : mstscax!PAL_System_Win32_ThreadWndProc+0x19
00000098`9f23e1b0 000007fe`c86914d7 : 00000098`9f94fb70 00000098`9f23e320 000007f7`f30de800 000007fe`abefb438 : user32!UserCallWinProcCheckWow+0x13a
00000098`9f23e270 000007fe`c86bc6c4 : 00000098`9f950eb0 00000098`9f950eb0 00000000`00000001 00000000`0000c000 : user32!DispatchMessageWorker+0x1a7
00000098`9f23e2f0 000007fe`c86bb8a3 : 00000000`00000000 00000000`000909fc 000007f7`f331d518 000007fe`c81931b2 : user32!DialogBox2+0x219
00000098`9f23e380 000007fe`c86bb936 : 000007f7`f32c0000 00000000`000909fc 000007f7`f331d518 00000000`000909fc : user32!InternalDialogBox+0x113
00000098`9f23e3e0 000007fe`c86bbbe9 : 000007f7`f32c0000 00000098`9f23e4e0 00000000`000909fc 00000000`00000000 : user32!DialogBoxIndirectParamAorW+0x56
00000098`9f23e420 000007f7`f331d788 : 00000000`000909fc 00000098`9f23e570 00000098`9f23e4e0 ffffffff`ffffffff : user32!DialogBoxParamW+0x69
00000098`9f23e460 000007f7`f331ce9e : 00000098`a0efedc0 000007f7`f32c7ab0 000007f7`f333b420 00000000`00000000 : mstsc!CDlgBase::CreateModalDialog+0x168
00000098`9f23e500 000007f7`f32e2604 : 00000098`a0efedc0 00000098`9f23ead0 000007f7`f32c7ab0 00000000`00000000 : mstsc!CDlgBase::DoModal+0x12
00000098`9f23e540 000007f7`f32dbd6b : 00000098`9f4ec3e0 00000098`9f4ec3e0 000007f7`f32c7ab0 000007f7`f333b420 : mstsc!CDefaultContWndExt::OnConnectionIssued+0xec
00000098`9f23e9d0 000007f7`f3302bd9 : 000007f7`f32cbb00 000007f7`f32cbb00 00000000`00000000 00000098`a0f1f350 : mstsc!CContainerWnd::StartConnection+0x4d7
00000098`9f23ee70 000007f7`f3301feb : 00000000`000909fc 00000000`00000111 00000000`000c09be 00000000`00000001 : mstsc!CMainDlg::DialogBoxProc+0xbb9
00000098`9f23f1b0 000007fe`c86ab3b9 : 00000000`00000001 00000098`9f23f331 00000000`00000111 00000000`00000000 : mstsc!CMainDlg::StaticDialogBoxProc+0x63
00000098`9f23f1f0 000007fe`c86ab108 : 00000098`9f919f70 00000000`00000000 00000000`00000111 00000000`00000001 : user32!UserCallDlgProcCheckWow+0x135
00000098`9f23f2c0 000007fe`c86ab02e : 00000000`000c09be 00000098`9f23f500 00000000`00000111 000007fe`cae31b95 : user32!DefDlgProcWorker+0xb8
00000098`9f23f390 000007fe`c869171e : 00000000`00000001 00000000`00000000 00000000`00000000 000007fe`c8be1535 : user32!DefDlgProcW+0x56
00000098`9f23f3d0 000007fe`c86d22f9 : 00000000`000c09be 00000000`00000111 00000000`80000000 00000000`00000000 : user32!UserCallWinProcCheckWow+0x13a
00000098`9f23f490 000007fe`c869487a : 00000000`00000000 00000000`00000000 00000000`00000001 00000098`9f919f70 : user32!SendMessageWorker+0xa72
00000098`9f23f540 000007fe`c86bbdd3 : 00000000`00090a12 00000098`9f919f70 00000000`000909fc 00000000`000909fc : user32!SendMessageW+0x10a
00000098`9f23f5a0 000007f7`f3312409 : 00000098`a0ef0080 00000098`a0ef0080 00000000`00000000 00000000`03260475 : user32!IsDialogMessageW+0x40b
00000098`9f23f630 000007f7`f3312a07 : 000007f7`f32c0000 00000098`9f312374 000007f7`f333b420 000007f7`00000000 : mstsc!TSCMain+0x695
00000098`9f23f6e0 000007f7`f33319c9 : 00000098`9f313100 00000000`00000000 00000000`00000000 00000000`00000000 : mstsc!WinMain+0x42f
00000098`9f23f750 000007fe`c8fe167e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : mstsc!ATL::AtlWinModuleTerm+0x375
00000098`9f23f810 000007fe`cae53501 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0x1a
00000098`9f23f840 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x1d
STACK_COMMAND: ~0s; .ecxr ; kb
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: dui70!DirectUI::Element::_SetValue+e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: dui70
IMAGE_NAME: dui70.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 50108e6a
FAILURE_BUCKET_ID: NULL_POINTER_READ_c0000005_dui70.dll!DirectUI::Element::_SetValue
BUCKET_ID: X64_APPLICATION_FAULT_NULL_POINTER_READ_dui70!DirectUI::Element::_SetValue+e
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/mstsc_exe/6_2_9200_16384/50108ae1/dui70_dll/6_2_9200_16384/50108e6a/c0000005/000027ee.htm?Retriage=1
Followup: MachineOwner
Any ideas what could be the problem and how to resolve this?

Further proof it's something with credentials/authentication. I found a valid workaround, but I think this one's on Microsoft to actually fix.
I opened up Remote Desktop Connection, put in my username and clicked the Save Credentials box. Then I edited all the other settings. Saved the RDP connection to my desktop. Then I edited it with notepad, and added the password value. I found a blog that
provides a program that'll hash the password for you. I used it so I can say its safe:
http://www.remkoweijnen.nl/blog/2007/10/18/how-rdp-passwords-are-encrypted/
I put the hashed password in, saved the file. Then used it to connect and it worked. So by bypassing RDP having to ask for credentials, it didn't crash since it doesn't ask. Kind of inconvenient if you have many computers you have to connect in to. But for
those in a bind this will work for you.
This one worked for me, no update or installation of software before it broke, but had a "wife-poweroutage" (cable taken out) I'm just not in the mood to reinstall for this. But the above fixed it for me. Thank you!

Exchange rate field greyed out when i use custom PO order type

Hi!
Upon creation of PO using SAP standard order type NB, the field exhange rate is editable. While when i used csutom PO order type, it is greyed out. How can we edit this? Where is the configuration of the exchange rate per order type?
If this is configured in IMG please include path, on how exchange rate is configured.
Thanks a lot.

Hi,
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here check the "Field Selection Key" against the PO doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF")
Then go to
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Select the " Field Selection Key" of ur doc type..Just Double click on that
then check for field " Exchange rate "
against that field you can see three options, Reqd.entry Opt. entry Display...
Here tick the field "Opt. entry", So that You can get this field in Change mode in ME21N trx...
Thx
Raju

Exchange Rate Differences function and when to use

The company I am asking about is based in the US, but also has offices and transactions in Canada. Does the Exchange Rate Differences function need to be run at month-end before finalizing the financials, in order to "re-value" the Canadian accounts, such as Accts Receivable, Accts Payable, Fixed Assets, etc. that may not have changed during the last month (no activity during the "current" month)? The financials are expressed in US Currency. Transactions during the month to the various Canadian accounts are "re-valued" at the time of the transaction entry, since the exchange rates are updated every day in the system. We need a clear-cut idea of when the Exchange Rate Differences function should be run.

I would say that you do need to do it. This is very important to ensure your account receivable control account (or payable) is revalued at the end of the month based on the new exchange rate.
I know some companies do not revalue the balances as it is not required. I think, revaluating the balance makes sense as it will give you a true picture of your payable or receivable at the end of the month. This is also a good way of accruing your exchange rate loss/gain.
Vincent

Windows Error 2 when trying to download iTunes 9 - HELP!

Hi,
Not sure of this is a Microsoft error or an Apple but I am trying to download the new iTunes on my Windows Vista computer and I'm getting the following error:
'Apple Application Support was not found
Apple Application Support is required to run iTunes. Please uninstall iTunes and then reinstall again
Error 2 (Windows Error 2)'
When I go into my Programmes, I can see that Apple Application Support is in there? I have tried uninstalling and reinstalling and am still getting the same error.
Has anybody else encountered this and know how to fix?
Thanks!!

HRESULT: 0x8007054f.
... that seems to have been the most popular alphanumeric code in recent days. (Just like katherine's one.)
In general, these ones tend to be caused by underlying problems on the PC that can prevent Windows Updates from installing. So my main strategy with them is to try to fix the Windows Update issues. If we can get Windows Updates flowing again, that generally clears up the iTunes install errors +en passant.+
Head into your Windows Update, and check for any new updates. Do any fail? If so, open your Update History and doubleclick on the failure entries to bring up a small box with alphanumeric error message codes. Are you getting 8000FFFFs? (They often seem to be associated with an iTunes-install 0x8007054f.)
If you're getting 8000FFFFs, try the following Microsoft document:
[Windows Update Error 8000FFFF|http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error- 8000FFFF]
Head back to Windows Update, and see if you can get Updates to install successfully this time. If you can get updates now, stock up on any updates you're behind on. Once you're completely up to date in that regard, try another iTunes install. Does it go through properly this time?

Running this hated Windows 8 and received the following error: Error 7 (Windows Error 32) when trying to re-install itunes. Any ideas or fixes? Thanks!

Recently purchased a new desktop with windows 8 OS. Had no trouble downloading itunes intially and importing library from external hard drive. Old computer tha the external hard drive backed up was windows XP operating system. Then itunes was not working correctly and within a couple uses it would no longer open. Tried reinstalling/repairing and received this message when trying to re-open the program:
Error7 (Windows Error 32)
Very frustrating!! I am really not liking the windows 8 OS. Unfortunately, I know next to nothing about computers and just want to be able to access my music.
Thanks in advance!

The 7 can indicate trouble with one of the other related software components needed by iTunes (like Apple Application Support). So it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and Reinstalling iTunes and other software components for Windows XP

Can I assign the exchange rate data to consignment when I use MRKO

We with the selling on consignment supplier are the foreign currency transactions
The exchange rate was changed between the consignment withdrawal in inventory management and the posting of the consignment invoice.
Then the transfer posting occur between consignment liabilities account and an exchange rate difference account .
The consignment liabilities account is not cleared afterwards.
I want to know how can I configure for the consignment liabilities account is cleared.

The functionality with the clearing of the consingment account
after you posting the invoice isn't available here.
It means if there different exchange rates were used
in the inventory management
and in in the transaction MRKO, the consingment account won't be
cleared in the local currency. You have to do it unfortunately
manually in FI.
The transaction MRKO just posts the invoices with the posting date of
the documents. You have to post manually from the consignment account
to the exchange rate gain/loss account. Sorry about it but this the only
way to do it. Otherwise, the exchange rate will be taken from table RKWA
Check note 393571

Exchange rate window pumps up when trying to generating customer receivables aging

Similar Messages

Maybe you are looking for