Exchange Rollup 7 SP3 Setup Prematurely Ended

Hello Everyone,
I am trying to install exchange rollup 7 sp3 on our Exchange 2010 server. It is currently setup on Windows Server 2008 R2 Enterprise edition x64. I Couldnt post the fill windowsupdate log file so just pasted anything that looks important.
When installing from windows update i receive an the following error code 80070643
I ran the windowsupdate.log file through a 3rd party tool and here is what it gave me:
1
2014-12-15 19:08:25
AGENT
WARNING: failed to access the auth cab, fatal error 0x80070003
2
2014-12-15 19:08:25
AGENT
WARNING: Invalid service in the backup data store; cleaning up
3
2014-12-15 19:08:25
AGENT
WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
4
2014-12-15 19:08:25
AGENT
WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
5
2014-12-15 19:10:35
AGENT
* WARNING: Online service registration/service ID resolution failed, hr=0x8024A005
6
2014-12-15 19:10:35
AGENT
* WARNING: Exit code = 0x8024A005
7
2014-12-15 19:10:35
AGENT
WARNING: WU client failed Searching for update with error 0x8024a005
8
2014-12-15 19:10:35
AU
# WARNING: Search callback failed, result = 0x8024A005
9
2014-12-15 19:10:35
AU
# WARNING: Failed to find updates with error code 8024A005
10
2014-12-15 19:10:38
PT
WARNING: Cached cookie has expired or new PID is available
11
2014-12-15 19:15:24
DTASTOR
WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/06/4418367_58b6396367cff62f838d6ac831f1ce2e9985ae81.cab for file WLY5Y2fP9i+DjWrIMfHOLpmFroE= when file
has not been previously added to the datastore
12
2014-12-15 19:15:24
DTASTOR
WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/updt/2011/04/windows6.1-kb982018-v3-x64_7853a1c9c63611e17cd2c923704bf2e924bdfe7b.msu for file eFOhycY2EeF80skjcEvy6SS9/ns=
when file has not been previously added to the datastore
tastore
454
2014-12-15 19:15:28
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
459
2014-12-15 19:18:51
AGENT
WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point
460
2014-12-15 19:18:51
AGENT
WARNING: LoadLibrary failed for srclient.dll with hr:8007007e
461
2014-12-15 19:21:58
HANDLER
: WARNING: First failure for update {8A89B318-0B37-4630-A38B-216EBC10F7B7}, transaction error = 0x8024200b, MSI
result = 0x80070643, MSI action = CA_SAVEDATA_STOP_SERVICES
462
2014-12-15 19:21:58
AU
# WARNING: Install failed, error = 0x80070643 / 0x80070643
463
2014-12-15 19:21:58
HANDLER
: WARNING: Operation failed at update 0, Exit code = 0x8024200B
464
2014-12-15 19:21:58
AU
# WARNING: Install call completed, reboot required = No, error = 0x00000000
465
2014-12-15 19:21:58
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
466
2014-12-15 20:31:08
AU
WARNING: ApproveUpdatesInternal failed with hr:8024000c
467
2014-12-15 20:31:08
WUAPP
WARNING: IAutoUpdateClient::ApproveUpdates failed with hr:8024000c
468
2014-12-15 20:31:08
WUAPP
FATAL: ElevatedApproveUpdates failed for 1 updates, hr=8024000C
469
2014-12-15 20:31:08
WUAPP
FATAL: Failed to begin install for 1 updates, error code 8024000C
470
2014-12-15 20:32:10
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
471
2014-12-15 20:32:15
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
472
2014-12-15 20:32:20
AU
WARNING: Returning due to error from GetDownloadProgressUx, error = 0x8024000C
473
2014-12-15 20:32:20
AU
WARNING: GetInteractiveInstallProgress failed, error = 0x8024000C
474
2014-12-15 20:32:20
WUAPP
WARNING: Call to GetInteractiveInstallProgress failed, hr=8024000C
475
2014-12-15 20:32:26
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
476
2014-12-15 20:32:28
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
477
2014-12-15 20:32:28
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
478
2014-12-15 20:32:28
AGENT
WARNING: failed to calculate prior restore point time with error 0x80070002; setting restore point
479
2014-12-15 20:32:28
AGENT
WARNING: LoadLibrary failed for srclient.dll with hr:8007007e
480
2014-12-15 20:37:18
HANDLER
: WARNING: First failure for update {8A89B318-0B37-4630-A38B-216EBC10F7B7}, transaction error = 0x8024200b, MSI
result = 0x80070643, MSI action = CA_SAVEDATA_STOP_SERVICES
481
2014-12-15 20:37:18
AU
# WARNING: Install failed, error = 0x80070643 / 0x80070643
482
2014-12-15 20:37:18
HANDLER
: WARNING: Operation failed at update 0, Exit code = 0x8024200B
483
2014-12-15 20:37:18
AU
# WARNING: Install call completed, reboot required = No, error = 0x00000000
484
2014-12-15 20:37:18
WUAPP
WARNING: Couldn't retrieve featured update notifications, hr=0, lcid=00000409
485
2014-12-15 21:49:50
COMAPI
WARNING: Received service shutdown/self-update notification.
486
2014-12-15 23:01:33
COMAPI
WARNING: Received service shutdown/self-update notification.
507
2014-12-16 15:06:42
COMAPI
WARNING: Received service shutdown/self-update notification.
I then downloaded the update rollup 7 for exchange server 2010 sp3 msi file and ran it in verbose mode . I downloaded the winodws sdk and used wilogutl.exe to examine the log files. It gave me 6 different errors
Errors Found For Log File C:\cailogs\exchangerollup7sp3.log
======================================================
6 Non-Ignored Errors
======================================================
Believed Error Found:
MSI (s) (B8!E0) [21:14:00:878]: Creating MSIHANDLE (22) of type 790531 for thread 6624
CAQuietExec: Error 0x80070001: CAQuietExec Failed
MSI (s) (B8!E0) [21:14:00:878]: Closing MSIHANDLE (22) of type 790531 for thread 6624
CustomAction CA_SAVEDATA_STOP_SERVICES returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B8:A4) [21:14:00:878]: Closing MSIHANDLE (20) of type 790536 for thread 6940
Action ended 21:14:00: InstallExecute. Return value 3.
Proposed Solution To Error:
A standard action or custom action caused the failure.
Believed Error Found:
MSI (s) (B8:1C) [21:14:02:112]: Transforming table InstallExecuteSequence.
MSI (s) (B8:1C) [21:14:02:112]: Transforming table InstallExecuteSequence.
MSI (s) (B8:1C) [21:14:02:112]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038
Action ended 21:14:02: INSTALL. Return value 3.
Summary for log file C:\cailogs\exchangerollup7sp3.log
======================================================
MSI Version : 5.0.7601
Date & Time :
Command Line:
User : (none)
Admin Rights: Yes
Client Priviledge Details: MSI (c) (38:40) [21:09:39:329]: Running product '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}' with elevated privileges: Product is assigned.
Server Priviledge Details: MSI (s) (B8:1C) [21:13:57:613]: Product {4934D1EA-BE46-48B1-8847-F1AF20E892C1} is managed.
MSI (s) (B8:1C) [21:13:57:613]: Running product '{4934D1EA-BE46-48B1-8847-F1AF20E892C1}' with elevated privileges: Product is assigned.
======================================================
Believed Error Found:
MSI (s) (B8!E0) [21:14:00:878]: Creating MSIHANDLE (22) of type 790531 for thread 6624
CAQuietExec: Error 0x80070001: CAQuietExec Failed
MSI (s) (B8!E0) [21:14:00:878]: Closing MSIHANDLE (22) of type 790531 for thread 6624
CustomAction CA_SAVEDATA_STOP_SERVICES returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B8:A4) [21:14:00:878]: Closing MSIHANDLE (20) of type 790536 for thread 6940
Action ended 21:14:00: InstallExecute. Return value 3.
Proposed Solution To Error:
A standard action or custom action caused the failure.
Proposed Solution To Error:
A standard action or custom action caused the failure.
Believed Error Found:
MSI (s) (B8:D8) [21:14:02:191]: Destroying RemoteAPI object.
MSI (s) (B8:8C) [21:14:02:191]: Custom Action Manager thread ending.
MSI (c) (38:40) [21:14:02:206]: Back from server. Return value: 1603
MSI (c) (38:40) [21:14:02:206]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (38:40) [21:14:02:206]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.
Action ended 21:14:02: ExecuteAction. Return value 3.
Proposed Solution To Error:
A standard action or custom action caused the failure.
Believed Error Found:
MSI (c) (38:58) [21:14:02:237]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 5 pixels
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
Action 21:14:02: FatalError. Dialog created
Action ended 21:33:53: FatalError. Return value 2.
Proposed Solution To Error:
User canceled action.
Believed Error Found:
MSI (c) (38:58) [21:14:02:237]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 5 pixels
The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
Action 21:14:02: FatalError. Dialog created
Action ended 21:33:53: FatalError. Return value 2.
Action ended 21:33:53: INSTALL. Return value 3.
Proposed Solution To Error:
A standard action or custom action caused the failure.
Believed Error Found:
MSI (c) (38:40) [21:33:53:195]: Windows Installer reconfigured the product. Product Name: Microsoft Exchange Server. Product Version: 14.3.123.4. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603.
MSI (c) (38:40) [21:33:53:211]: Grabbed execution mutex.
MSI (c) (38:40) [21:33:53:211]: Cleaning up uninstalled install packages, if any exist
MSI (c) (38:40) [21:33:53:226]: MainEngineThread is returning 1603
Proposed Solution To Error:
Fatal error during installation.
0 Ignored Errors
======================================================
Believed Error Found:
No Error Found!
Proposed Solution To Error:
No Solution Needed!
Policies Set For Log File C:\cailogs\exchangerollup7sp3.log
======================================================
Machine Policies
======================================================
AllowLockDownBrowse : ?
AllowLockdownMedia : ?
AllowLockdownPatch : 0
AlwaysInstallElevated : 0
Debug : 0
DisableBrowse : ?
DisableMSI : 1
DisablePatch : 0
DisableRollback : 0
DisableUserInstalls : 0
EnableAdminTSRemote : ?
EnableUserControl : ?
LimitSystemRestoreCheckpointing: 0
Logging : ?
SafeForScripting : ?
TransformsSecure : ?
DisableLUAPatching : 0
DisablePatchUninstall : ?
DisableFlyWeightPatching : 0
EnforceUpgradeComponentRules: 0
MaxPatchCacheSize : 10
User Policies
======================================================
AlwaysInstallElevated : 0
DisableMedia : ?
DisableRollback : 0
SearchOrder : ?
TransformsAtSource : ?
I do not have network policy server setup.
I have disabled certificate revocation list from internet options
I have added all the windows update sites to the trusted domains list
I have spent over 10 hours trying to figure out what is going on here. Could someone please help me? I thank you in advanced and all input is accepted.

Hi Scott,
Please verify whether you have installed KB2506143:
https://support.microsoft.com/kb/2506143 .
If it is the case, please try to uninstall this KB.
Thanks
Mavis Huang
TechNet Community Support

Similar Messages

Exchange 2010 SP3 Update Rollup 6 breaks first OWA login (timezone selection) on SBS 2011

The Exchange 2010 SP3 Update Rollup 6 broke the OWA for Users who access OWA for the first time and have to set a timezone. They get this error:
Request
Url: https://xxxxx:443/owa/languageselection.aspx
User: xxxxxx
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxx
SMTP Address: xxxxxx
OWA version: 14.3.195.1
Exception
Exception type: System.ArgumentNullException
Exception message: Value cannot be null. Parameter name: value
Call stack
Microsoft.Exchange.Clients.Owa.Core.Utilities.RenderDirectionEnhancedValue(TextWriter output, String value, Boolean isRtl)
Microsoft.Exchange.Clients.Owa.Core.LanguageSelection.RenderTimeZoneSelection()
ASP.languageselection_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
System.Web.UI.Page.Render(HtmlTextWriter writer)
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
This Server is an SBS2011.
The update broke nothing on a "normal" 2008R2 with exchange 2010.
Uninstalling RU6 helped but thats obviously not the desired way.
Removing the RenderTimeZoneSelection() call from languageselection.aspx obviously helped but then there is no timezone dropdown displayed anymore. The timezone dropdown is working normaly in other places like ecp. Afaik this error occours only in the languageselection.aspx
file which is displayed for "new" OWA users. (Users without a timezone set)
my workaround was to set the language and timezone for these mailboxes via exchange shell.

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

Hi there,
I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
Our current Exchange environment consists of the following:
1 x CAS/HT Server
2 x Mailbox Server (members of a DAG)
The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
The Execution Policies on our Exchange servers are set as follows:
– CAS/HT Server:
Scope ExecutionPolicy
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine Unrestricted
– Mailbox Servers:
Scope ExecutionPolicy
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine RemoteSigned
Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
I would be very grateful if you (or any of the kind readers) could help me with following questions:
1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
ii. Install SP3 followed by RU 5 on the first mailbox server
iii. Install SP3 followed by RU 5 on the second mailbox server
Many thanks,
M

Hi Amit,
Many thanks for the swift reply.
That's correct. We didn't set the Powershell execution policy via Group Policy. We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
The mailbox servers' execution policies have not been changed and are set to those values by default.
I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

Exchange 2010 SP3 Rollup Update 6

Our Exchange environment is currently on Exchange 2010 SP3 RU3 and the Forefront Protection 2010 for Exchange server version is 11.0.713.0 (Rollup 3).
We planning to upgrade Exchange servers and install Exchange 2010 SP3 RU6, question which I have is it Mandatory to upgrade the Forefront Protection 2010 for Exchange server version is 11.0.727.0 (Rollup 4) before we install Exchange 2010 SP3 RU6 on the
Exchange servers.
Thanks,
AJ

Thanks Adam for the prompt response and yes I recall these cmdlets to disable and there is a similar cmdlet to enable it. Also after Exchange 2010 SP2 after some RU there is no need to disable FPE before installing RU however it is recommended to disable
it.
If you refer the comments section mentioned in the blog below it talks about it:-
http://blogs.technet.com/b/exchange/archive/2014/05/27/released-update-rollup-6-for-exchange-2010-service-pack-3.aspx
If you read the comment posted by James Knoch posted on this blog which is as below,
SP3 & the Rollup Updates are not supposed to require you to disable Forefront anymore, but it doesn't hurt to be safe and disable/enable it anyways. Make sure you are running Forefront Rollup 4 (http://support.microsoft.com/kb/2619883)
& the latest security update (http://www.microsoft.com/en-us/download/details.aspx?id=41836).
Above stated confused me a bit, is it mandatory to upgrade Forefront or it is NOT.
Thanks,
AJ

Exchange 2007 SP3 latest update rollup

I would like to install the latest update rollup for Exchange 2007 SP3. I was reading and found Update Rollup 12, is this the latest version? No other update rollups are installed.
I did the SP3 update by installing on the hub transport first, then the 2 mailbox stores.

Hi,
Update Rollup 13 for Exchange 2007 SP3 has been released on 25th February 2014.
Rollup 13 for Microsoft Exchange 2007 SP3 can be downloaded here:
Update Rollup 13 for Exchange Server 2007 Service Pack 3 (KB2917522)
Informations about changes you can find here:
Description of Update Rollup 13 for Exchange Server 2007 Service Pack 3
One thing we need to take into consideration is the order to apply update on our Exchange servers, it should be the following:
1. CAS (if you have multiple sites, internet facing sites first)
2. Hub
3. MBX
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 SP3 Rollup 8 and Rollup 7

Hi
I have a customer with a Small Business Server 2010 with Exchange 2010 SP3.
The Customer installed updates on the server 10/12/2014 where Rollup 8 for Exchange was included.
After that the Customer has a lot of problems with connection from Outlook to Exchange and they phoned us.
We have looked on the problem and found a Microsoft article about rollup 8 where they said DO NOT INSTALL
We ran Windows Update again on the 13/12/2014 where Rollup 7 was installed
The customers still has problems with connection from Outlook.
One of the errors:
From: Systemadministrator
Sent: 15. december 2014 10:54
Subject: Unable to be delivered: Test
This message did not reach one or all of the recipients.
      Subject:     Test
      Sent:15-12-2014 10:54
Unable to deliver to the following recipient(s):
      MST the 15-12-2014 10:54
            This message could not be sent. Try to send the message again later, or contact the networkadministrator. Error [0x80004005-00000000-00000000].
Another error in Application log:
Log Name:      Application
Source:        MSExchange Common
Date:          16-12-2014 08:09:00
Event ID:      4999
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      <servername>.<domain>.local
Description:
Watson report about to be sent for process id: 9340, with parameters: E12, c-RTL-AMD64, 14.03.0224.001, M.E.RpcClientAccess.Service, M.E.RpcClientAccess.Handler, M.E.R.H.ViewCache.IsRowWithinUnreadCache, System.IndexOutOfRangeException, 8e38, 14.03.0224.001.
ErrorReportingEnabled: False
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Common" />
    <EventID Qualifiers="16388">4999</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-16T07:09:00.000000000Z" />
    <EventRecordID>174679</EventRecordID>
    <Channel>Application</Channel>
    <Computer><servername>.<domain>.local</Computer>
    <Security />
</System>
<EventData>
    <Data>9340</Data>
    <Data>E12</Data>
    <Data>c-RTL-AMD64</Data>
    <Data>14.03.0224.001</Data>
    <Data>M.E.RpcClientAccess.Service</Data>
    <Data>M.E.RpcClientAccess.Handler</Data>
    <Data>M.E.R.H.ViewCache.IsRowWithinUnreadCache</Data>
    <Data>System.IndexOutOfRangeException</Data>
    <Data>8e38</Data>
    <Data>14.03.0224.001</Data>
    <Data>False</Data>
    <Data>
    </Data>
</EventData>
</Event>
What to do ?
Best Regards
John B

Hi John,
Please type
outlook /safe in RUN to start Outlook in safe mode and then check if this issue still exists. Meanwhile, please run Exchange Best Practices Analyzer and check if find relevant issues.
à
This message could not be sent. Try to send the message again later, or contact the networkadministrator.
Error [0x80004005-00000000-00000000].
The issue typically occurs if send messages to a large number of recipients.
When this issue occurred, did you check if send message successfully via OWA?
à
We have looked on the problem and found a Microsoft article about rollup 8 where they said DO NOT INSTALL
Did you mean this article:
Exchange releases: December 2014?
à
We ran Windows Update again on the 13/12/2014 where Rollup 7 was installed
From the Event ID 4999, I noticed that point to
14.03.0224.001, it should mean the old Exchange Server 2010 SP3 Update Rollup 8. From above
mentioned article (Exchange releases: December 2014),
Exchange Server 2010 SP3 Update Rollup 8 has been re-released to the Microsoft download center resolving a regression discovered in the initial release. The update RU8 package
corrects the issue which impacted users connecting to Exchange from Outlook. The updated RU8 package is version number 14.03.0224.002. Just a confirmation, did you
reinstall that re-released Exchange Server 2010 SP3 Update Rollup 8? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Primavera p6 professional R8.2 setup wizard ended prematurely because of an error.

i want to install primavera p6 professional R8.2 in my machine after selecting standalone option i am getting following error.
"Primavera p6 professional R8.2 setup wizard ended prematurely because of an error.your system has not been modified"
can any one help on this.

Hi,
If the typical option is allowing the application to install, then i'd suggest just adding the database side of it manually.
The client application for PPM and EPPM in P6r8.2 and 8.3 is the same application (P6 Professional) and is 'smart' enough to enable/disable features depending on if it detects a PPM or EPPM database.
There should be an Oracle XE installation file in the download that you can install (personally I prefer SQL Server Express but you will need to enable Named Pipes and TCP/IP after it is installed).
I would recommend installing one of these, creating the database manually and then configure the install you have that is pointing to your EPPM database to also point to the PPM database you create after installing OracleXE/SQL Server Express.
Regards
Alex

Exchange 2010 sp3 rollup 7 fails

Exchange 2010 sp3 rollup 7 fails. This is ran at an elevated prompt and the UAC off. This server is also logged in as the domain Administrator account.
The server currently has rollup 4 SP3 installed. I'm wondering if I should uninstall it, reboot then try the Rollup 7 SP3 update?

Hi,
Can you please post the error?
At the same time please check these.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2010 SP3 Rollup 7 not showing right version

I have installed Rollup 7. I can see it in programs installed / updates
but when I check the version number via the shell or console it show the number corresponding to sp3 no rollups
tried to re install rollup7, but it fails

There is:
Update Rollup 8 for Exchange Server 2010 SP2,
and Update Rollup 8 for Exchange Server 2010 SP1
But, as far as I know, there is no Update Rollup 8 for Exchange Server 2010
SP3 yet.
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.
That's correct Idan. Exchange 2010 SP3 RU7 is the latest - released in August this year:
http://blogs.technet.com/b/rmilne/archive/2014/08/26/exchange-2010-sp3-ru7-released.aspx
Just like in Exchange 2003 & 2007 only service packs increment the version # you see in the management console and shell. Check the exsetup file as mentioned in the first post Idan linked.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2010 SP3 Update Rollups

Hi All,
I have a question about installing Update Rollups for Exchange 2010 SP3. After some organizational changes I have to take care of windows updates and our WSUS server. During the last check I found out that there are:
Update Rollup 5,6,7 listed in WSUS for our Exchange which is (CAS, HUB, MB). I've checked also some information about installing Update Rollup but it's not very clear for me. i saw also a problems after installing Update Rollup 6 and also some info from
blogs.technet.com
The release contains fixes for customer reported issues and previously released security bulletins. Update Rollup 7 is
not considered a security release as it contains no new previously unreleased security bulletins. Customers running
any Service Pack 3 Update Rollup for Exchange Server 2010 can move to Update Rollup 7 directly.
So, what is the best way to do it?
- Decline old Update Rollups, Install all other security and critical updates from WSUS, reboot the server, install Update Rollup 7, reboot the server?
Thanks in advance

Hi kondio
Thank you for your question.
Service packs and update rollups are part of the servicing strategy for Exchange 2010. They provide an effective and easy-to-use method to distribute Exchange 2010 fixes and modifications. We recommend that you install the latest service pack and update
rollup to keep the product up-to-date.
I suggest you update manually instead of WSUS.
You can refer to the following link to read about RU:
http://technet.microsoft.com/en-us/library/ff637981(v=exchg.141).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Exchange 2010 SP3 Rollup 8v2 causes client connectivity issues

I installed SP3 Rollup 8v2 this weekend, going from 7. Since then we are having random client connectivity issues. New profiles can't be created, and some users can't access resources when booking meetings. We can do a registry fix to their machines to add
a DS Server, but this is a workaround only. I have uninstalled the Rollup 8v2 and we are still having the issue.
I thought 8v2 was supposed to fix this issue!

Hi,
According to your post, I understand that outlook client cannot connect to Exchange server to configure profile and cannot get list of resources room when upgrade to Exchange 2010 SP3 Rollup 8v2, the temporary solution is that specify the DC in registry.
If I misunderstand your concern, please do not hesitate to let me know.
Is there error message when configure Outlook failed?
Please run Test E-mail AutoConfiguration and Outlook connection status to double confirm the URL and FQDN of Exchange server.
As additional, please run below command to double check the state of Exchange system component:
Get-ServerComponentstate -Identity “servername”
If the state is Inactive, please run below command to active relevant component:
Set-ServerComponentState <Identity> -Component “component name” -Requester HealthAPI -State Active
More details about Server Component States in Exchange, for your reference:
http://blogs.technet.com/b/exchange/archive/2013/09/26/server-component-states-in-exchange-2013.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Cannot connect to OWA after Exchange 2007 SP3 and Rollup 13 install.

Hi,
Our OWA website isn't accessible after we installed SP3 and rollup update 13 for Exchange 2007. When we attempt to visit the OWA URL, all we receive is HTTP 403.4 SSL is required to view this resource. Doug

Hi,
I recommend you follow the steps below for troubleshooting:
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
What's more, here is a thread for your reference.
Exchange 2007 SP3 Rollup 2 installed - OWA stopped working
http://social.technet.microsoft.com/Forums/en-US/8481eb3d-a6ab-42fc-b7ea-fa9a9a625e48/exchange-2007-sp3-rollup-2-installed-owa-stopped-working?forum=exchangesvrdeploylegacy
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Contacts created with Lotus notes are not seen in Exchange 2007 SP3 Rollup 7.

Contacts created with Lotus notes are not seen in Microsoft Exchange 2007 SP3 Rollup 7. the same is seen in Microsoft Exchange 2010 without issues.
when we create a new contact on Microsoft Exchange 2007, the contacts gets created but it is not seen unless we filter the EMC to list the contacts. Microsoft Exchange 2010 does not have any issues.
any help or inputs will be appreciated.
Thanks,
Sid

You shouldn't be using the 2007 EMC or cmdlets to create new objects if you have a more recent release installed in your organization. Use the 2010 software.
If you create the mail-enabled contact with the 2010 EMC or cmdlets do you see it in the 2007 EMC?
When you say the contact "is not seen unless we filter the EMC to list the contacts", does that mean you don't see the contact when you're looking at the "Recipient configuration" container? Is there a default filter on that container? Do you have a limit
on the number of objects shown?
As for the objects created by 3rd-party software (Lotus), are they creating the contacts correctly?
--- Rich Matheisen MCSE&I, Exchange MVP

OWA Page breaks after Installing the Rollup 11 on Exchange 2007 SP3

I have applied the Update Rollup 11 on my Exchange 2007 SP3 and after updating the Rollup I am able to login to OWA but the it has broken the graphics and all the folders with X icon and cant get inside the folder/mail.
We use RSA token for the sign in
I had tried replacing the OWA folder from the backup and it did not helped.
Any suggestions will be really appreciated.
Regards,
Sudheesh Rajan

Hi,
If the problem happens after installing rollup, please uninstall it and then reinstall.
Most of these problem happen if certian dll files reatling to OWA are not registered or missing. To quickly resolve this problem, you can try to apply the latest SP or reinstall CAS server.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Does Outlook "Connection Status" Show Rollup Updates on Exchange 2010 SP3

Hi all,
I've looked for this answer everywhere, and can't seem to find it. When you CTRL right-click on the Outlook taskbar icon, and select "Connection Status", one of the pieces of information displayed is the Version number of the connected Exchange
server.
Does this build number include installed rollup updates, or does it show only the installed Service Pack. For example, if it's an Exchange 2010 SP3 server with RU6 installed, will I see 14.3.195.1
or just 14.3.123.4 (the SP3 build number)? I'm trying to use this information to troubleshoot
client issues, and it'd be helpful to quickly see if certain updates are installed on the Exchange server or not.
Thanks!

Hi,
Just as what mentioned above, connection status displays the Exchange version number.
Start Outlook and connect to the Exchange server if this isn’t done automatically already.
Hold CTRL while clicking on the Outlook icon in the Notification Area
(located in the right bottom area near the time; expand the Notification Area first if the Outlook icon does not show).
From the context menu that pops-up choose: Connection Status…
Scroll the horizontal scrollbar to the right to see the Version column.
(if the dialog is empty, then you are not connected to Exchange)
Here you’ll see a version number.
Best regards,
Belinda Ma
TechNet Community Support

Exchange Rollup 7 SP3 Setup Prematurely Ended

Similar Messages

Maybe you are looking for