"Exchange Server 2003" Public folder access within OWA

Hello,
I can connect to my exchange server 2003 (I know I have to upgrade) with OWA through an alias (webmail). After connecting in OWA, when I click a button in the navigation bar (contact, rules, ...), it's working OK except for public folders. When I click on
public folders button, IE open a new window with this URL https://<netbios server name>/public instead of https://webmail/public. I googled around and found a thread explaining how this problem can be address by modifying navbar.js. But in my situation
navbar.js and every other files located in ..\exchweb\control doesn't seem to be access anymore, they have been replaced by those here ..\exchweb\6.5.7651.60. There is no navbar.js in this folder but a vw_navbar.js. I can't find the code I have to modify like
in navbar.js to to address the problem.
Thanks for your help.
Chris

Hi Chris,
This symptom can be caused if we enabled any redirection on /Public virtual directory. You can check the /Public settings and configuration files to remove the redirection. We can also reset the reset the default virtual directories as the KB introduced:
http://support.microsoft.com/kb/883380
Best Regards,
Tracy

Similar Messages

Exchange Server 2010 public folder - Events show in SharePoint 2010 Calendar

I want to fetch items to SharePoint 2010 Calendar from Exchange Server 2010 Public Folder Calendar called Event. How can I achieve this ?

May be you can directly fetch whole public folder in sharepoint server
http://www.amrein.com/apps/page.asp?Q=5778
If this helped you resolve your issue, please mark it Answered

Exchange server 2003 public folders

Hi Microsoft,
I am trying to decommission an Exchange 2003 server. It has public folders on it. How do I tell if they are the master replica?
Kind Regards,
Jerome Green

as long as you don't remove anything you will be save.
check these articles
http://www.petenetlive.com/KB/Article/0000426.htm
http://www.msexchange.org/articles-tutorials/exchange-server-2003/migration-deployment/PFMIGRATE.html
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
http://careexchange.in/moving-public-folders-from-exchange-2003-to-exchange-2010/
hope this will help -
Where Technology Meets Talent

Exchange Server 2010 Public Folder Error!

I found that no one can sent email to our mail-enable public folder. there's a warning like below
Delivery has failed to these recipients or groups:
([email protected]) <[email protected]>
There's a problem with the recipient's mailbox. Please try resending the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: EXCHUB02.domain.com
[email protected]
#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionNotFound:16.18969:B8000000,
17.27161:0000000054000000000000000000000000000000, 255.23226:2B0A0000, 255.27962:44000000, 255.17082:BFF9FFFF, 0.25697:00000000, 4.21921:BFF9FFFF, 255.27962:FA000000, 255.1494:35000000, 255.26426:96000000, 4.18236:BFF9FFFF, 4.7974:BFF9FFFF, 255.1750:43000000,
0.26849:43000000, 255.21817:BFF9FFFF". ##
Original message headers:
Received: from EXCMAIL02.domain.com ([fe80::7c57:574e:f764:e8f7]) by
exchub02.domain.com ([::1]) with mapi; Mon, 7 Apr 2014 15:47:55 +0700
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: "Admin" <[email protected]>
To: <[email protected]>
Subject: sdasd
Thread-Topic: sdasd
Thread-Index: Ac9SPhG67LrxITcEQjufincOJHZGwg==
Date: Mon, 7 Apr 2014 15:47:55 +0700
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
Did you guys know what happen to my public folder? cause i can't find the right solution for my problem.

Please check out the below thread related to your query.
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/c1fab3bd-589d-4c7c-8807-2eda93d11c27/
Hope it helps

Migrate Exchange Server 2010 Public Folder shared calendars to Exchange Server 2013

Dear All,
I have an question about calendars under public folder migrating to new exchange server 2013. When completed the PF migration progress, will it also migrate calendars under sub-folder under PF to new PF mailbox?
For example: in exchange 2010 PF:
In exchange 2013
\Public Folder\sales\A1_calendar
--->
\ Public Folder\sales\A2_calendar
---> ?
\Public Folder\sales\A3_calendar
---> ?
\Public Folder\sales\A4_calendar
---> ?
Thanks in advance.
Regards,
Willis Wong

Hi Willis,
This forum is for general questions and feedback related to Outlook. Since your question is more related to Exchange server, I'd recommend you post a new question in the Exchange forum for further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Exchange 2013 Public Folder Calendars in OWA

Hello,
I have a Public Folder calendar that I need to publish via OWA in Exchange 2013. I understand that you cannot view any public folder that is not mail enabled in OWA. If I make this specific calendar mail enabled will I be able to view the calendar
in OWA? I think I still have to convert this to a shared mailbox. If that is the case, what are the best steps to perform that?

Hi,
Yes I agree with Ed Crowley. In Exchange 2013 Cumulative Update 1, Microsoft have allowed to display public folders. However, two major restrictions exist. First, OWA can only display modern public folders. In other words, you have to complete your
migration to Exchange 2013 and then execute a public folder migration before OWA can be used. No access is possible to legacy public folders. Second, OWA can only display “mail public folders”, or public folders that contain “mail and post items” (as they
are referred to by Outlook). Other folders (calendars, contacts, tasks, notes, InfoPath, and journal items) are unsupported.
Regards,
Santhosh,
www.jijitechnologies.com

A problem with Win 7 Pro, Outlook Web Access based on Exchange Server 2003, and two different domains

Dear Microsoft Support,
As mentioned in the title,
I have two domains. One is Domain A at HQ. The other one is Domain A at branch office. A laptop having Win 7 Pro OS is a client of Domain A. The Domain A has Exchange Server 2003. Users of Domain B get connected to Exchange Server for email services. In
all clients of the Domain B, IP address of the email server added in C:\Windows\System 32\drivers\etc\host file.
Whereas in the clients of Domain A it was not done, because all the servers including the email server belong to the Domain A.
Now, a user with Domain A's client (it is a laptop) came to Branch office and wanted to access the Outlook (using Outlook Web Access). since there is no IP address added in the Host file of the laptop, connectivity to email is not possible. When I try to
add the IP address, I was not able to do so due to Domain A's security reasons.
So, let me know, is there a way out to add the IP address in the host file of the Domain A's client.
Thanks in advance.
Ravi Sekhar Modukuru

I would suggest adding the mailserver address in Domain B's DNS. Would that be possible?
I agree. The correct solution in this case (since it appears you already have a two-way Domain Trust in place) is to properly configure DNS in Domain 'B' to be a secondary of Domain 'A' and completely eliminate the need to maintain the HOSTS file.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Microsoft Exchange Server 2003 and Windows 8 Compatibility

Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?

If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
AFAIR Outlook 2013 can't work with Exchange 2003.
Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization

Exchange server 2013 public ip

hello,
can any be help me on "how to assign public IP to exchange server to configure webmail access".. please
Mohammed Altaf Ahmed

Hi,
Rich's suggestion is pretty helpful. Public IP address is required to represent an Exchange server on the Internet. The router or Firewall will translate the public IP address to the internal one and forward communications from the internet to the Exchange
server.
Here is a related article for your reference, please refer to the "IP Addressing" topic.
Planning for Your First Exchange Server:
http://www.msexchange.org/articles-tutorials/exchange-server-2003/planning-architecture/Planning-First-Exchange-Server.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange Server 2003 Email setup on IPHONE and IPOD Touch

Hi we have Exchange Server 2003 (SP2) on Windows Standard Server 2003 and we can access OWA from any browser and also am able to setup Exchange server Emails on Blackberry device without any problem but when I try to setup on IPHONE or IPOD touch I get error message saying Can not connet to server. I tried to get the answer on google and seems like it should work but seems like I need to some other settings on exchange server to setup exchange server email on Iphone or Ipod. Any idea what could be the issue.

Sorry I forgot to tell you that I tried without Exchange also.
I tested my activsync Connectivity test from https://testexchangeconnectivity.com/ and it fails at SSL. (Port 80 and 443 shows open and passed) In our server we bought SSL scertificate last year from godaddy and installed as I thought it requires but later on I removed as I was not able to setup iphone. So I don't know what could be the exact problem.

Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

DPM 2010 - Exchange Server 2003 Re-Directed Restore

Hello people. I am looking for some help. We currently have DPM 2010 on Windows 2008 R2 backing up Exchange Server 2003 SP2 on Windows 2003. We are trying to migrate our existing Exchange server DBs (physical server) to another Exchange Server 2003(VMware
VM) in the same domain and site. We are trying not to go the P2V route if at all possible. The existing Exchange DBs are about 1.3TB in size. The existing server has 4 Storage Groups, with a total of about 20 mailbox stores. We are trying to
get the data migrated within a 48 hour window, which at this point eliminates moving the mailboxes to the new server using Exchange task - Move Mailbox. I am also thinking RSG would not be a good option for us as the existing mailbox server will remain operational
until all the data has been migrated to the new server.
Is anyone out there aware of a document that walks through the process of doing a re-directed restore of Exchange Server 2003 DBs, backed up using DPM 2010? If a redirected restore can be done, how does AD get updated to reflect the new HomeServer for users'
mailboxes? Can the DBs simply be restored as raw files to the new server and be successfully mounted?
Thank you in advance for your support.
TD
TD

Hello people. I am looking for some help. We currently have DPM 2010 on Windows 2008 R2 backing up Exchange Server 2003 SP2 on Windows 2003. We are trying to migrate our existing Exchange server DBs (physical server) to another Exchange Server 2003(VMware
VM) in the same domain and site. We are trying not to go the P2V route if at all possible. The existing Exchange DBs are about 1.3TB in size. The existing server has 4 Storage Groups, with a total of about 20 mailbox stores. We are trying to
get the data migrated within a 48 hour window, which at this point eliminates moving the mailboxes to the new server using Exchange task - Move Mailbox. I am also thinking RSG would not be a good option for us as the existing mailbox server will remain operational
until all the data has been migrated to the new server.
Is anyone out there aware of a document that walks through the process of doing a re-directed restore of Exchange Server 2003 DBs, backed up using DPM 2010? If a redirected restore can be done, how does AD get updated to reflect the new HomeServer for users'
mailboxes? Can the DBs simply be restored as raw files to the new server and be successfully mounted?
Thank you in advance for your support.
TD
TD

Upgrading Exchange Server 2003 to 2010 to 2013 is worth???

Hello there, I am planning to upgrade about 30 users from exchange server 2003 to 2010 and finally to 2013. Is it worth to upgrade in this way because this steps are hard and very time consuming. What if, if I just copy all the user mailboxes directly to
exchange server 2013 and configure 2013 as a new exchange server and decommission old exchange server 2003?
How to copy user mailboxes to fresh exchange server 2013?
Please help me out.
Thankx

Yes, Export the PST from User Mailbox and Import it into Exchange 2013 Mailbox. But the problem is, you can't install Exchange 2013 in your current Exchange 2003 environment.
Only option is to install Exchange 2010 first and migrate all the users to Exchange 2010. Also Replicate the Public Folders too(If you are using)
Decommission Exchange 2003 entirely. Install Exchange 2013 SP1 and Migrate the User to Exchange 2013.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Iphone 3G, Exchange Server 2003 and NOT sending "Read Mail" receipts

I have a 3G Iphone that syncs with Exchange Server 2003. I do NOT want people to see when I read or delete their emails so I have my Outlook account set up that way. It works from my desktop, however, my Iphone still triggers notifications saying whether I read a message or deleted without reading. I haven't found a way to change this on the phone - has anyone else?
Sorry to repost this question, but the first back in March never got any replies, so support suggested I try again. Thanks!

http://davmail.sourceforge.net/osximapmailsetup.html
http://davmail.sourceforge.net/faq.html
http://davmail.sourceforge.net/macosxsetup.html

"Exchange Server 2003" Public folder access within OWA

Similar Messages

Maybe you are looking for