Exchange server 2003 restartштп, after DC shutdown

We have Exchange server 2003 and two DC on server 2008 r2 in organization.
When main DC is shutting down, exchange server restarting. There are no scrips\GPO that orders to restart Exchange after shutting down the DC.
What can cause this occurrence? How can I fix it?

Hello,
to work correct with Windows server 2008 r2 DCs it is important that Exchange 2003 SP2 is installed.
Beside this you may create an additional GC in the ESM Recipient update service fo the second GC, so the connection is still available.
We are also running Exchange 2003 with multiple Windows server 2008 R2 machine without any problems.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Similar Messages

Steps to restore a failed exchange server 2003

If I have a recently taken full backup of my failed server what are the steps to restore it.
I mean, After installing OS, then may I have to create the domain or restoring full backup creates domain automatically?

Hi,
Firstly, I’d like to explain, if you want install the Exchange server on the server you have installed OS, I recommend you just add the server into domain and create the domain on another server. Because it’s not recommended to install Exchange sever on
DC:
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
And here are some references about restoring Exchange server:
http://support.microsoft.com/kb/258243
http://www.msexchange.org/articles-tutorials/exchange-server-2003/high-availability-recovery/Exchange-2003-Backup-Restore-NTBACKUP.html
Best regards,
Angela Shi
TechNet Community Support

"Exchange Server 2003" Public folder access within OWA

Hello,
I can connect to my exchange server 2003 (I know I have to upgrade) with OWA through an alias (webmail). After connecting in OWA, when I click a button in the navigation bar (contact, rules, ...), it's working OK except for public folders. When I click on
public folders button, IE open a new window with this URL https://<netbios server name>/public instead of https://webmail/public. I googled around and found a thread explaining how this problem can be address by modifying navbar.js. But in my situation
navbar.js and every other files located in ..\exchweb\control doesn't seem to be access anymore, they have been replaced by those here ..\exchweb\6.5.7651.60. There is no navbar.js in this folder but a vw_navbar.js. I can't find the code I have to modify like
in navbar.js to to address the problem.
Thanks for your help.
Chris

Hi Chris,
This symptom can be caused if we enabled any redirection on /Public virtual directory. You can check the /Public settings and configuration files to remove the redirection. We can also reset the reset the default virtual directories as the KB introduced:
http://support.microsoft.com/kb/883380
Best Regards,
Tracy

Microsoft Exchange Server 2003 and Windows 8 Compatibility

Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?

If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
AFAIR Outlook 2013 can't work with Exchange 2003.
Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization

Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

Iphone 3G, Exchange Server 2003 and NOT sending "Read Mail" receipts

I have a 3G Iphone that syncs with Exchange Server 2003. I do NOT want people to see when I read or delete their emails so I have my Outlook account set up that way. It works from my desktop, however, my Iphone still triggers notifications saying whether I read a message or deleted without reading. I haven't found a way to change this on the phone - has anyone else?
Sorry to repost this question, but the first back in March never got any replies, so support suggested I try again. Thanks!

http://davmail.sourceforge.net/osximapmailsetup.html
http://davmail.sourceforge.net/faq.html
http://davmail.sourceforge.net/macosxsetup.html

A problem with Win 7 Pro, Outlook Web Access based on Exchange Server 2003, and two different domains

Dear Microsoft Support,
As mentioned in the title,
I have two domains. One is Domain A at HQ. The other one is Domain A at branch office. A laptop having Win 7 Pro OS is a client of Domain A. The Domain A has Exchange Server 2003. Users of Domain B get connected to Exchange Server for email services. In
all clients of the Domain B, IP address of the email server added in C:\Windows\System 32\drivers\etc\host file.
Whereas in the clients of Domain A it was not done, because all the servers including the email server belong to the Domain A.
Now, a user with Domain A's client (it is a laptop) came to Branch office and wanted to access the Outlook (using Outlook Web Access). since there is no IP address added in the Host file of the laptop, connectivity to email is not possible. When I try to
add the IP address, I was not able to do so due to Domain A's security reasons.
So, let me know, is there a way out to add the IP address in the host file of the Domain A's client.
Thanks in advance.
Ravi Sekhar Modukuru

I would suggest adding the mailserver address in Domain B's DNS. Would that be possible?
I agree. The correct solution in this case (since it appears you already have a two-way Domain Trust in place) is to properly configure DNS in Domain 'B' to be a secondary of Domain 'A' and completely eliminate the need to maintain the HOSTS file.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Microsoft Exchange Server 2003 Small Business Server

Has anyone been successful syncing email with a MS Exchange Server 2003 Small Business Server?
My IT guy has tunred on IMAP, but still no luck. Just get a warning message that the iPhone cannot connect to the server.
Thanks.

Turning IMAP on is the 1st step. IT will also need to open that port (143) on the firewall.

Incoming email - Routing rules on exchange server 2003

I am configuring SAP system to receive emails as per note 455140. We currently have only one client and have updated necessary profile parameters including setting SMTP port to 25 for incoming mails. We have specified our enterprise exchange server 2003 as the mail server in SCOT transaction and are able to send out emails from SAP without issues, but cannot receive emails in SAP.
Following note 607108, I am able to receive emails in the SAP system using telnet test (by passing mail server), thereby I believe all relevant configuration settings in SAP system have been correctly maintained. Now, if I try to send an email to SAP user from another SAP system or Microsoft Outlook or Internet, these emails are not being received in SAP. No inbound traces are generated in SAP since the mail has not been received by SAP.
As part of the config, our server admins have set up a rule on mail server to forward specific emails to SAP system. Does anyone have any insight into what might be the issue here? Also, if someone can provide links/directions on how to setup routing rules on exchange server 2003 to forward specific requests to SAP system (I believe this is where our issue is).
Thanks!
Fahad

Hello Markus,
By specific, I meant emails addressed to specific users need to be forwarded to SAP. Instead of specifying *ATcompany.com --> WebASHost:25000, we put in a rule userATcompany.com --> WebASHost:25000
Based on your response, I asked SAP support whether there is such restriction when SU01 email address and exchange email address are same, exchange will not forward to SAP. Below is there response
"SAPconnect like most mail platforms route mails via the email address.
SAP recommends the following:-
UserATClient.SID.company.com
I know that a DNS entry will have to be written for this to be routed
to your Exchange server for relay into SAP.
The only other recommendation is to use the local part of the mail
address to route the mails. This will not require an external DNS
entry but every new user will have to be updated in Exchange.
User.client.sidATcompany.com
There are no other way of correctly routing mails other than these
methods. Thank you."
Now SAP says when email addresses are same and if we put in a rule based on local part of the mail, it should still forward.
Since the issue is through exchange, SAP will not provide further support to resolve this and we cannot go with sub-domains currently due to business requirements.
Any suggestions.
Thanks,
Fahad

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

Can we install Exchange server 2003, 2007 and 2010 on Server 2012 R2 ?

Sir,
I want to know whether Exchange server 2003, 2007 and 2010 can be installed on Server 2012 R2 or not.
Thanks in advance.

You can only install Exchange 2013 SP1 on Server 2012 R2
As far as I know Exchange 2010 SP3 can't be installed on R2 . The other Exchange Servers are too old

Anybody using MBA OSX able to use "Notes" to Sync with the notes located on a exchange server 2003 pls?

My company is using an Exchange Server 2003 and Im using both an Iphone 5s and a MBA OSX.
All Exchange features are seamless on Iphone (mail, contacts, alendar AND NOTES)
On my laptop MBA:
- I used to use Outlook for mAc in which the notes were working but I had to go away from this (issue rebuilding too often and incompatibility with Wrikes etc.)
- so I now use Mail, Ical, Contacts and ... I wish Notes! - but I cant get Notes to pick up the exchange server notes ... no error message just nothing happens (yes the account exchange is set up for all features and Notes is checked) ... Im puzzled - Am I alone experiencing this please?
Thanks community!
Seb

correction: It's SBS 2011 running a strip down version of exchange 2010 ... and my MacBook Air Notes Application wont sync the notes with exchange ... ;-(((

Can't sync IMAP inbox with Exchange Server 2003

Since Lion doesn't work with Exchange Server 2003, I set up an IMAP account in Outlook 2011 via Davmail for myself and a colleague on our laptops. This has worked for my e-mail account (syncs on multiple computers, including one running Exchange directly, and with my iPad's mail client), but not for my colleague.
For some reason, my colleague's inbox receives pushes from the server, but won't send back changes made in Outlook. Messages that have been read remain unread; deleted e-mails go into what is purportedly the server's trash in Outlook 2011, but remain in the inbox on the server. Changes made on the IMAP on the laptop also don't sync to my colleague's iPhone.
Our configuration is the same.
Any ideas? Could it be on the server side?
Thanks!

I feel your pain. I also am a lone Mac user in an entire building full of PC robots, and the IT people haven't got a clue.
I've been trying to get Mac mail working with the Exchange server here, but it's just not happening. I've managed to get Entourage working though, which is far from ideal but significantly better than the web-based version of Outlook that I'd been having to use up till now.
For entourage, then yes - the incoming and outgoing servers are the same. You may need to ask your recalcitrant IT people which port numbers to use, but give it a whirl anyway.
Best of luck,
Boris
UK

Compatibility Exchange Server 2003 SP2 and Domain controllers Windows Server 2008 R2

Hi all, I have this scenario:
- Two Domain Controllers Windows Server 2003 R2 SP2
- Two mail servers Exchange Server 2003 with the following version:
6.5 (Build 7638.2 Service Pack 2)
I want to upgrade my domain controllers to Windows Server 2008 R2.
My question is whether exchange Server 2003 6.5 (Build 7638.2 Service Pack 2) is supported with Domain Controllers Windows Server 2008 R2.
Can you tell me some official Microsoft website where this reflected?
regards
Microsoft Certified IT Professional Server Administrator

Exchange Server 2003 SP2 supports DCs running Windows Server 2008 R2. These DCs should be RWDCs and not RODCs:
Exchange 2003 SP2 will now be supported against writeable Windows Server 2008 R2 Active Directory Servers. Additionally, with the General Availability of Exchange Server 2010, and those looking to standardize on Windows
Server 2008 R2 we have enhanced the supportability of forest and domain functional levels up to Windows Server 2008 R2. This change is effective immediately on Exchange 2003 SP2.
Reference: http://blogs.technet.com/b/exchange/archive/2009/11/30/3408893.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Help to have exchange server 2003

help me i want to have exchange server 2003 for my projet

Hummm... difficult to get Exchange 2003 source or perhaps if you have MSDN subscription....
Blog |
Get Your Exchange Powershell Tip of the Day from here

Exchange server 2003 restartштп, after DC shutdown

Similar Messages

Maybe you are looking for