Exchange Server 2007 : Attachment Size Problem

Dear Support Team,
My company has used Exchange Server 2007, Our Attachment policy is limit 10 MB. Our user send the attachment size 7 MB to Company B that it's the same policy.
But user in company B cannot received attachment, it's exceed.
I check EventID in my site. 
- Received is 7 MB
- Transfer is more than 10 MB
Why? Please help to clarify and suggest how do I set the new policy.
Thanks in advance.

Hi MasterBird,
It is hard to say how ??% per attachment increased, it's according to the encapsulation.
I have tested on my real Outlook, (47KB->51KB), (535KB->539KB), (575KB->579KB).
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Similar Messages

  • Exchange server 2007 Service Pack problems SBS 2008

    I am Running Exchange server 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2 but it fails both windows update and manually. Can anyone first advise me what version I'm currently running?
    Help / about form Exchange Management Console displays:
    Version 08.01.0436.000
    And running repair on Exchange server from programs and features displays 2007 SP1 setup. So I believe SP2 to be next I have also ran SP3 but this fails.
    Here is the end lines from a log:
    [03/05/2014 08:54:13] [0] Setup will run the task 'uninstall-msipackage'
    [03/05/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [03/05/2014 08:54:13] [1] Beginning processing.
    [03/05/2014 08:54:13] [1] Property 'PackageName' is 'EXCHANGESERVER.msi'.
    [03/05/2014 08:54:13] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
    [03/05/2014 09:09:01] [1] [ERROR] Unexpected Error
    [03/05/2014 09:09:01] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is 'Could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.  
    Verify that you have sufficient access to that key, or contact your support personnel. '.
    [03/05/2014 09:09:01] [1] [ERROR] Fatal error during installation
    [03/05/2014 09:09:01] [1] Ending processing.
    [07/05/2014 19:45:17] [0] End of Setup
    There is a registry key to match this and The administrator account used for setup has access to it i believe??? What does this log mean?

    Hi,
    This error indicated that your account missed registry permissions on: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\ 7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613
    Please check whether you have permission. You can also check whether the key have permissions inherited from the Parent Key or not.
    After changing the permission, please run the setup again.
    Best Regards.

  • I have problems to connect iCal 6.0 (Mountain Lion) with Exchange Server 2007

    I used ICal with Exchange Server 2007 without problems with Lion. After I adopted Mountain it has been impossible to use ICal and I have obliged to use Outlook because It was not possible to connect ICal with Server.
    I reinstalled Mountain and rebuilt Outlook data base, canceled cache and so on but without results. How cn I do?

    I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
    Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out.

  • Backup Issue of exchange server 2007 mailbox store

    Dears
    Exchange server 2007 with CCR clustering
    I have got a problem with the backup of one of my mailbox store. Its going till the last and giveing the final error as follows:-
    V-79-57344-65247 - A failure occurred reading an object.
    Also the warning as follows:-
    Backup- \\mailserver.domain\Microsoft Information Store\First Storage Group
    WARNING: "\\mailserver.domain\Microsoft Information Store\First Storage Group\Database" is a corrupt file. This file cannot verify.
    Backup V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes.
    Does it mean my information store is really a corrupted file. It has been properly monted and logs are genearting.
    Even when I checked the last full backedup log file from the management shell it clearly shows the backing up is properly happened on the log files.
    When I checked the event log of Exchnage server I can see these logs:-
    Event ID 401, 403 errors
    The size of the problem store is 308 GB.
    One of the other store with 46 GB is backing up without any issue

    Hi,
    If you have a space issue with the Exchange server, you can upgrade drives on active node and passive node one by one. It is not recommended to upgrade them at the same time.
    For more information about upgrading Exchange 2007 CCR active node or passive node, here are some helpful threads for your reference.
    Upgrade hard drives on passive node. Process and procedure
    http://social.technet.microsoft.com/Forums/exchange/en-US/08b9e893-87c9-48c3-bab2-91027cc09949/upgrade-hard-drives-on-passive-node-process-and-procedure?forum=exchangesvravailabilityandisasterrecoverylegacy
    Upgrading hard drives in exchange server
    http://social.technet.microsoft.com/Forums/exchange/en-US/0e4514f9-76da-44d2-9dec-a3be5add79b1/upgrading-hard-drives-in-exchange-server?forum=exchangesvravailabilityandisasterrecoverylegacy
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Exchange server 2007 automatic transfert

    Hi all,
    I have a strange problem with my Exchange server 2007 : since several days, all my incoming and outcoming mails from Exchange server are automatically transfered to my admin mailbox.
    The messages are like "Microsoft Exchange from ..." and I have the original message attached to the email.
    I don't find where to disable this option and how it activate alone ... :/
    Anyone know this problem ?
    Best regards,
    Billy
    Billy LAILLE

    Hi Ed,
    Ok you were right.
    Journaling was activated for my mailbox under Transport Hub.
    Thanks a lot for you help,
    Billy
    Billy LAILLE

  • Provisiong of users from OIM to Exchange Server 2007

    Hi,
    I am trying to Provisioning the users from OIM 9.1.0.1 to Exchange server 2007. For this i used Exchange Server Connector 9.1.1.1.0. By using AD_Base_connector 9.1.1.0.0 i can
    provisioned the user details. But while provisioning to the Exchange server 2007 i am getting the following error
    ERROR [XELLERATE.WEBAPP],Class/Method: tcLookupFieldAct ion/lookupByColumn encounter some problems: lookup Error in OIM
    And i am unable to get the LookUp detais for the MailBox in Design Console as well as in the ScheduleTasks in OIM Admin Console..
    Can anybody help me in solving this issue.
    Thanks & Regards
    SRI

    Hi suren,
    i am using the Remote Manager. I enabled logs in log.properties in both OIM server and Remote Manager.
    I am observing the following message in Remote Manager command prompt.
    DEBUG,30 Mar 2010 01:12:44,437,[XELLERATE.REMOTEMANAGER],Class/Method: RMISSLCli
    entSocketFactory/createSocket left.
    and i am getting the error in Weblogic server command prompt.
    Running ISADAM
    Target Class = java.lang.String
    Running GETATTRIBUTEHASH
    Target Class = com.thortech.xl.util.adapters.tcUtilHashTableOperations
    Running Set User Attributes
    ERROR,30 Mar 2010 01:13:39,484,[XELLERATE.WEBAPP],Class/Method: tcLookupFieldAct
    ion/lookupByColumn encounter some problems: lookup Error
    can u help me in resolving this issue.
    Thanks in Advance,
    SRI

  • MimeMessage.reply() issue with MS Exchange Server 2007 Emails

    I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
    Also, if the message passes validation, positive notification is sent back to the sender.
    Both processes use the method: javax.mail.Message.reply()It's coded as:
    MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
    javax.mail.SendFailedException: No recipient addresses
         at javax.mail.Transport.send0(Transport.java:110)
         at javax.mail.Transport.send(Transport.java:80)
         at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
         at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
         at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
    MS Exchange 2003 works fine
    From: [email protected]
    To: [email protected]
    Subject: Re: Report
    In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
    From: [email protected]
    Subject: Re: Reports
    In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
    Thanks,
    LaelW

    When the original message is accessed using IMAP, the reply method uses the information in the
    IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
    in the ENVELOPE, then the From address.
    Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
    header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
    It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
    The ENVELOPE data will follow this syntax:
    envelope     = "(" env-date SP env-subject SP env-from SP
              env-sender SP env-reply-to SP env-to SP env-cc SP
              env-bcc SP env-in-reply-to SP env-message-id ")"
    So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
    fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
    IMAP provider to fall back to the Sender field if the From field is missing.

  • HELP - Exchange Server 2007 Transport Rule Issue

    Hi all,
    sorry if here is not the place to put my question but I did not find another forum, so if anyone can help me I appreciate.
    - I have an Exchange Server 2007 SP3 environment with 1 MBX Server and 3 CAS/HUB Servers.
    - I have created a Transport Rule that said:
    "all emails that have @test.com in BCC field are dropped off except one group can send" .
    The issue is the rule doesn´t work.
    Anyone can help me, please?
    Thanks in advance.
    Luiz

    The Exchange previous versions forums are here: 
    http://social.technet.microsoft.com/Forums/en-US/category/exchangeserverlegacy
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Exchange Server 2007 shows email as "Receive" but not "Deliver"

    Hi Guys
    We have Exchange Server 2007 inside of a SBS 2008 set up.
    One specific email from a regular sender wasn't received by the recipient. The recipient is used to receiving messages from this sender and the email is not hiding within Outlook.
    Exchange 2007 mail tracker shows the email was received, but that's it. Nothing has happened to the email after that. Normally we'd see a "Deliver" report, or possibly a "Fail", but always something to show the email has been actioned
    in some way.
    The queues are all empty.
    So, this one email has disappeared into the ether of Exchange! So far as I can see, this is the only email with only a "Receive" notification. All others have something else immediately following the Receive.
    The Server has GFI anti-spam installed, but that hasn't seen the email either, because emails are collected by Exchange before being passed to GFI. In this instance it hasn't been passed, or returned to the sender as undeliverable. It just seems
    to have been eaten.
    Would anyone have any sensible suggestions on where to start kicking this email back into life?

    Hi Simon
    Apologies for the late response, but I only get to this client once a month.
    1. Did the sender get NDR? ~ No
    2. Let the receiver check the email via OWA and see
    whether the email is available. ~ Still not available
    3. Use MFCMAPI to check the user mailbox, can you
    find the missing email? ~ I haven't yet worked out what is MFCMAPI or how to use it to check, but I suspect that as the Exchange email tracker doesn't have any actions after "Receive" that it cannot have sent the email on to the user's mailbox or rejected
    the email as non-deliverable.
    The client isn't too willing to expend too much effort
    / cost on this issue which does appear to be a one-off glitch, but I am interested in resolving it for myself as I haven't heard of this problem before.
    Thanks for the interest,
    Michael D

  • Exchange server 2007 SP3

    Dear all,
    Presently we are using exchange server 2007 Sp3 along with windows 2008 x64 Domain controller it's working fine . But we have some issue related with
    Message Size restriction when I changed maximum msg size sent and receive  this option will applied to the mail box user taking long time how can i update this option immediately  to the end users ?
    Best Regards
    Subash 

    Hi,
    After you configure the mailbox size restriction for a mailbox, the configured limits are enforced after a period of time, but do not take effect immediately. Restarting the Microsoft Exchange Information Store service causes the configured limits to take
    effect immediately.
    Please restart the Microsoft Exchange Information Store service to check result.
    Here is a related article about this issue for your reference.
    http://technet.microsoft.com/en-us/library/bb684892(v=exchg.80).aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Exchange Server 2007 OWA users can receive email but can't send

    Hi,
    I have an Exchange server 2007 in an SBS 2008 environment with POP3 connector configured and working fine , smtp send mail connector configured. 
    Now users can connect to OWA, receive email but cant not send.
    smtp connector works fine from Outlook client. Tried to track the emails from exchange server management console and I get the
    SEND DELIVER SUBMIT TRANSFER.
    The emails go to the sent items folder, but it never reach the recipients.
    Have been troubleshooting for a while without succes. Any help will be most appreciated.
    Regards
    Faisal

    POP3 is a single mailbox client mail retrieval protocol, not a mail transport protocol. 
    Any attempt to use it as a mail transport protocol is a great big kludge. 
    Exchange is designed to connect to the Internet using SMTP.
    No version of Exchange has a POP3 connector.
    I recommend that you post this in the SBS Forum:  http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Exchange server 2007 stop receiving emails

    i have a strange issue with our exchange 2007 server, and i hope any one can help me, each day i have one of our exchange servers can't receive emails, and all emails sent to users in this servers are queued in the sending email server, and i have to manually
    restart the Microsoft exchange transport service in this server so that it's able to receive emails, i found an error in the server that always repeated with different parameters
    the error is
    Error ID: 4999
    Error Source: MSExchange Common
    Watson report about to be sent to dw20.exe for process id: 3508, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000.  ErrorReportingEnabled:
    False
    i receive the same error each time the server stop responds but the parameters is changed each time (Process ID number always changed) like below
    Watson report about to be sent to dw20.exe for process id: 3644, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000.  ErrorReportingEnabled:
    False
    i hope any one can help me solving this problem
    the server is windows server 2008
    Exchange 2007 SP2 Server Rollup 5
    McAfee Enterprise Antivirus is in the box
    Backup Exec Agent is in the box Also
    a lot of transport rules applied to our exchange organization
    Mahmoud Sabry IT System Engineer

    Hi
    As per the information and details provided by you, Exchange server 2007 stop receiving emails, then please follow these steps: -
    If you do have a 60 GB partition on the C: drive, one of the first signs of trouble is when the free space on C: drops below 2GB. Exchange 2007 stops receiving external
    emails. This is caused by a condition known as Back Pressure.
    Please check the following: -
    Check the nslook up for correct MX record.
    Run the exbpa and llok for any recent changes.
    Check for the device in perimeter network which accepts connections on port 25 FW or any other anti spam device).
    Try to run a telnet session from the firwall and then out side and drop email on the server.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • Migration of Unity users from MS Exchange server 2007 to 2010

    Hi,
    I am having Unity 7.0 with MS Exchange server 2007,now want to transfer the users and Unity mailboxes to MS Exchange server 2010. Want to know the procedure. Can anyone help me out?

    The way you're doing it has two very high hurdles.
    First, you have to get the data out of an offline server and into Office 365.  That's hardly a trivial task.  If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
    Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007.

    Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.

    I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
    Windows and all their applications. It didn't solve the problem!
    What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
    My next step is to send the customer a new ADSL modem/router to try.
    I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
    In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.

  • Mail / Calendar with Exchange Server 2007

    Hi all,
    We have a problem with Apple Mail and Calendar (Mountain Lion) connected to an Exchange Server 2007.
    Apple Mail for no reason doesn't show the available data on the server. At first all goes right but after a few hours the data get corrupt. Folders disappear, mails aren't shown, ... The folders and mails are there in the server. I can check that with Outlook for Mac or on a collegues machine on Windows.
    I tried:
    - deleting the mail cache and mail data and restart
    - removing the accounts and setting them up again
    - creating a new user and trying mail in that user
    None of those solved my problem.
    Apple Calendar doesn't sync its data correctly. Example:
    I create an event in calendar A. From that event I onvite calendar B to join the event. So far, so good. Everything just syncs fine. Then for some reason I delete the event from calendar A. In the server the event is still there. I checked in Outlook. This error is reproducable.
    I tried:
    - naming the user to <WORKGROUP>\<user>
    - deleting the calendar cache and calendar data
    None of those solved my problem.
    Can anybody help me with this?

    Hi and Welcome to the Forums!
    The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
    Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for