Exchange Server 2010 - Authentication fails with DC
I have implemented Windows Server 2008 R2 Active Directory on Server: DC1
I have Implemented Exchange Server 2010 SP2 on Server: EMLSERVER
Previously MDeamon 5.5 was using for Messaging Services.
Manager told me he want only email server to be available after office hours.
For Exchange Server 2010 we have to power on two servers AD and EXCH.
For This reason i install AD on Exchange Server 2010 and Transfer all Roles from DC1 to EMLSERVER.
Now EMLSERVER is our AD and EXCH, and DC1 is our ADC.
To check this configuration i power off current ADC old DC (DC1).
when i try to test OWA, it was not working, and i get HTTP 500 Error, i try to troubleshoot it and finally after enabling Form Based Authentication Service HTTP 500 error has been resolved and i get OWA Page there when i try to Authenticate with Username
and Password i have got HTTP 400 error and i am sucked now.
Can anyone suggest what should i do now.
The Requirement is that I have to provide a solution that is equivalent to MDeamon 5.5, where Company have just one DC which is use for authentication and group policy on Windows and another server which is MDeamon email server.
After office hours they power off DC and just email server is power on.
Therefore new solution must fulfill the same requirement, and in this scenario I have to put DC and Email together so that there is no power overhead.
1- Yes new DC which is together with Exchange is Global Catalog.
2- All Microsoft Exchange services are running.
3- There is no smart card authentication, there is just User/Pass require to authenticate.
4- Old DC/ Current ADC has been powered off after verifying transfer of all AD roles.
5- Previously I have installed DC on DC1 server and Exchange 2010 on EMLSERVER and it was working fine.
Similar Messages
-
Exchange server 2010 backup fails
My exchange server backup keep failing
the exchange server 2010 two node dag
netbackup 7.6
I have contacted Symantec support. They believed it's Exchange server problem as "Vssadin list writers"
show Microsoft Exchange writer Retryable error
Any help?Hi,
Please try to restart Information Store service for testing.
Also try to refer following blogs:
Troubleshooting Exchange 2007 VSS Backups
http://blogs.technet.com/b/exchange/archive/2008/08/25/3406172.aspx
Exchange and VSS -- My Exchange writer is in a failed retryable state
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
Thanks
Mavis Huang
TechNet Community Support -
Exchange Server 2010 SP3 Installation with UM Language Pack Error
Hi All,
Kindly help me in this issue, When I Install Exchange Server 2010 SP3, I faced an error in UM role setup as the below,
and when i searched on it i found solution like "Download the UM language packs and tried to install directly" so i downloaded "UMLanguagePack.en-US" from the below URL:
http://www.microsoft.com/en-eg/download/details.aspx?id=36769
and when i tried to install it, i faced the below error:
also i searched on this error and i found solution in registry as the below:
Try remove registry key for the above error :
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\<Your Version >\UnifiedMessagingRole\LanguagePacks"
and after i did it, i found first error be solved and the second error still the same as the below:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just
this role, or remove the role using Control Panel.
Is there a solution on this issue please i wanna solve it As soon as possible?
Thanks in advance,I solved the below error by editing in registry:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just this role, or remove the role using Control Panel.
Solution:
Open regedit (Start -> run), navigate to the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14
Under each role, UnifiedMessagingRole, have a look for an action and watermark entry, Delete these 2 keys, and retry. it solve this error, and You can now run the installation again of your "UMLanguagePack.en-US". and its done and installed now.
After "UMLanguagePack.en-US" Installation, i tried to continue installation of Exchange Server 2010 SP3, but I faced the same first error in UM role setup as the below,
What can i Do? please help urgently. -
DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail
Hi,
It could be a coincidence, but ever since installing Update rollup 4 onto DPM 2012 R2, (which was at UR3 I believe) I haven't been able to complete an Exchange express full backup or consistency check with verification using Eseutil checked. If I have the
eseutil check enabled I get the following error:
Type: Consistency check
Status: Failed
Description: Data consistency verification check failed for LOGS of Exchange Mailbox Database Mailbox Database 2011112513 on SERVER.xxx. (ID 30146 Details: The process cannot access the file because it is being used by another process (0x80070020))
Disabling the eseutil verification allows it to succeed, but I'm not happy to continue with that for too long.
I've had this running for many years and this is the first real issue with exchange, its a single stand alone exchange database.
Any ideas?
Thanks,
AndreasAndreas,
the error is stating that something else has a handle to a file or files during the ESEUtil check. Typically this is AV. I have also seen where the Exchange limits are exceeded and that causes the issue.
Please ensure you have the DPM AV exclusions for the DPM server and I would advise the DPMRA.exe on the PS. You can also trying disabling or removing AV as a test.
DPM AV exclusions -
http://technet.microsoft.com/en-us/library/hh757911.aspx
You may also want to test using eseutil against the logs outside DPM and see if that fails with similar issue. Let us know. Thanks
Regards, A.Nadar, This posting is provided "AS IS" with no warranties, and confers no rights. -
Exchange server 2010 SP3 Fails to install
I have just installed Exchange sp3 and has failed at the CAS update this has left a few connectivity issues.
Extract from the log file
[1] The following 1 error(s) occurred during task execution:
[1] 0. ErrorRecord: The virtual directory 'Autodiscover' already exists under 'CALLAN-server.local/Default Web Site'.
Parameter name: VirtualDirectoryName
[1] 0. ErrorRecord: System.ArgumentException: The virtual directory 'Autodiscover' already exists under server.local/Default Web Site'.
Parameter name: VirtualDirectoryName
[1] [ERROR] The following error was generated when "$error.Clear();
Update-AutodiscoverVirtualDirectoryVersion -DomainController $RoleDomainController;
$existingVDirs = get-AutodiscoverVirtualDirectory -Server $RoleFqdnOrName -DomainController $RoleDomainController;
if ($existingVDirs -ne $null)
$existingVDirs | set-AutodiscoverVirtualDirectory -WSSecurityAuthentication:$true -DomainController $RoleDomainController;
else
new-AutodiscoverVirtualDirectory -WSSecurityAuthentication:$true -DomainController $RoleDomainController;
" was run: "The virtual directory 'Autodiscover' already exists under server.local/Default Web Site'.
Parameter name: VirtualDirectoryName".
[1] [ERROR] The virtual directory 'Autodiscover' already exists under 'CALLAN-server.local/Default Web Site'.
Parameter name: VirtualDirectoryName
[1] [ERROR-REFERENCE] Id=ServicesComponent___a8409d9e1e024948a9cf2805368de7dd Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[1] Setup is stopping now because of one or more critical errors.
[1] Finished executing component tasks.
1] Ending processing Install-ClientAccessRole
Hope someone can help I have been at this for quite some time
Thanks in advanceThis explains something, when you run Get-AutodiscoverVirtualDirectory it gives nothing so looks like SP3 installer is also not able to find and trying to create a new autodiscover virtual directory but fails saying its already there.
If you try to run Remove-AutodiscoverVirtualDirectory or New-AutodiscoverVirtualDirectory those would give errors too.
I believe if you go to IIS - > Default Web Site -> Autodiscover you should be able to see it there but looks like it is in inconsistent state.
You won't be able to reset the Autodiscover virtual directory by following Resetting
Autodiscover Virtual Directory but worth trying it.
If not,
- Go to IIS and remove the autodiscover
- Create one by following Create an Autodiscover Virtual Directory
- Go to CMD prompt and run the IISReset
- Run Get- AutodiscoverVirtualDirectory and make sure you see it
- Run the SP3 upgrade
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Exchange Server 2010 autodisovery fail
Hi
we have set up new exchange server recently, after we configured client side , we found that global address book can not update properly, we have try manually update from both client side and server side, it doesn't help, however the outlook web account
is all good to run, further i found when we setup client side outlook, if we UN-select "use cached exchange mode" , it works well, also we run test E-mail Auto Configuration. and it shows tls=no,spa=no,failed(0x800CCC0D). i feel like some miss configure
on the server.any solution for that?Hi Kulolo,
Please verify the email account type, Hotmail, Exchange or IMAP etc?
For the error code 0x800ccc0d, please follow the troubleshooting steps in KB below:
Error occurs when you send or receive an email message in Outlook or Outlook Express
http://support.microsoft.com/kb/813514/en-us
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx -
Exchange Server 2010 - DAG - Physical and Virtual
Hi All,
we are trying to configure Exchange Server 2010 SP1 DAG with TWO Servers, we are getting the error sector size on log file header was mismatch
1) Physical Server - when we check the sector size on log file - 512 bytes (RAID5)
2) Virtual Server - when we check the sector size on log file - 4096 bytes
is there any workaround to solve this issue or do i need to re-install the physical server with 4096 sector size..
When i check the Volume details on both machine
1)
Bytes Per Sector : 512
Bytes Per Physical Sector : <Not Supported>
Bytes Per Cluster : 4096
Bytes Per FileRecord Segment : 1024
2)
Bytes Per Sector : 512
Bytes Per Physical Sector : 4096
Bytes Per Cluster : 4096
Bytes Per FileRecord Segment : 1024
MCITPHi Jared,
I've got a question regarding your answer.
We have an existing Exchange 2010 DAG configuration with 3 mailbox servers in NL and 3 in the UK.
2 for normal databases at each site and 1 for Archive databases at each site.
The current Mailbox servers for the Archive databases are Hyper V 2008 R2 based VM's with a passthrough for storing the databases.
We now want add 1 new Mailbox server for storing archive databases at each site and add them to the DAG.
Can we use Windows 2012 Hyper-V hosts and create the new VM's with 4k sectorsize vhdx files for the new mailbox servers ?
Regards
Misha Verhoeven -
Event logs fails to start on Exchange Server 2010
My Exchange server 2010 R2 SP1 Enterprise single server is down. All exchange services fail to start. It appears like the Microsoft Exchange Active Directory Topology service isn't starting which is a dependency for all other services.
The error I get when trying to start this service is:
Windows could not start the Microsoft Exchange Active Directory Topology on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code
-2147024882
To make matters worse, the event viewer is not starting either.
When trying to start the Windows Event Log, I get the error:
Windows could not start the Windows Event Log service on Local Computer. Displays Error code 5
This is running on a Windows Server 2008 R2 SP1 Standard box.
Any assistance is appreciated.When trying to start the Windows Event Log, I get the error:
Windows could not start the Windows Event Log service on Local Computer. Displays Error code 5
Hi,
Based on this error, this problem happens if any of the following conditions are true:
The built-in security group EventLog does not have permissions on the folder %SystemRoot%\System32\winevt\Logs
The Local Service account does not have default permissions on the following registry key: HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability
To solve this problem, we need to restore the default permissions in the list below on %SystemRoot%\System32\winevt\logs.
Authenticated user - List folder/read data, Read attributes, Read Extended attributes, Read permissions
Administrators - Full control
SYSTEM - Full control
EventLog - Full control
Please try the following methods:
Method 1
To restore the default permissions on folder %SystemRoot%\System32\winevt\logs, follow these steps.
Right-click on %SystemRoot%\System32\winevt\logs and select Properties.
Select the Security tab.
Click Edit button and click the Add button in the permissions dialog box.
In Select users, computers, or Groups dialog box ensure that under object types Built in Security Principals and the location as local computer name is selected.
Enter the object name as "NT SERVICE\EventLog" without quotes. And click OK. This group should have full control on the folder.
Once EventLog group is added add the rest of the groups with above mentioned permissions.
Method 2
Identify a Windows Server 2008 machine with default permissions.
Click Start, and then type cmd in the Start Search box.
In the search results list, right-click Command Prompt, and then click Run as Administrator.
When you are prompted by User Account Control, click Continue.
Type the command CD %SystemRoot%\SYSTEM32.
Once the working directory is changed to %SystemRoot%\SYSTEM32 type the command icacls winevt\* /save acl /T.
This will save a file named ACL in %SystemRoot%\SYSTEM32. Copy this file to the C: drive on the problem computer.
On the problem computer, open command prompt with administrator privileges (refer to previous steps 1-3).
Change the working directory to %SystemRoot%\SYSTEM32.
Execute the command icacls winevt\ /restore acl.
Default permissions on the registry key HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability should be:
CREATOR OWNER - Full control
SYSTEM - Full control
LOCAL SERVICE - Query Value, Set Value, Create Subkey, Notify and Delete
Administrators - Full control
Users - Read
To set the permission on this registry key:
Click the Start menu, select Run and type Regedit.
Go to the location HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability.
From the Edit menu click Permissions.
Add the permissions for the accounts as listed above.
In addition, Exchange 2010 SP1 and SP2 are end of support.
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?alpha=exchange%20server%202010&Filter=FilterNO
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
MartyI recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010
Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
How to install Exchange Server 2010 with the name of my existing Domain Controller.
I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Need help with Outlook 2013 connecting to Exchange server(2010)
Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
ThanksHi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh -
Why the removed flag will be resumed after re-sync with MS Exchange server (2010)
Dear Sir:
I had a big problem using Lion mail application. I like the program since it's quite simple and useful. But this problem makes me not able to work with Lion mail program continaully.
In Lion mail, I import my office mail account which based on MS Exchange server 2010. I just found some mails (sorry I cannot fina any rule) which ever be flagged, when I try to un-flag them. The flag status will come back after re-sync with mail server. But the status doesn't happen with all mails I had. One thing I can confirm is, the "specific" mail doesn't be marked with any status after I checked them using Outlook application (both Mac Office 2011 or Windows Office 2010). Have you ever received similar feedback? Please help me to resolve this issue ASAP. Thank you.
-JosephWhen the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope = "(" env-date SP env-subject SP env-from SP
env-sender SP env-reply-to SP env-to SP env-cc SP
env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing. -
Exchange server 2010 console not opening, inialization failed
hi,
exchange server 2010 console not opening, inialization failed when i have upgraded service pack to sp1.
please suggest asap or u can reach me @
[email protected]
[email protected]
+918750003544Even I found the same issue once, and then I realised that the SP and RU should be same in exchange sever and the machine where the issue is.
Could you please check the same if that machine has the same Sp and RU, if not, please upgrade the same? I bet it will start working
Regards,
ASP20
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.
Maybe you are looking for
-
In some pc ActionScript not working even after running the .SWF or .EXE, what may be the problem ?
In my flash project i am using ActionScript to get FULLScreen and mouse hide action. I hv already used the AS3 in Adobe Flash CC and AS2 in Adobe Flash CS6. All my files are working well, both .SWF and .EXE (projector..) . But the client is saying i
-
Hi everyone. I have tried everything to uninstall iTunes so I can update it, even downloaded and paid for a suggest program to fix it and nothing (quick annoyed at that). I was trying to follow the steps that have been recommended many times before (
-
How to autheticate user on EBS DB
Hi my requirement is to authenticate user on EBS DB table. user will enter his user name and password in jspx page .i need to authenticate that user with his EBS db credentials public bolean authenticate(String username,String password) //call EBS DB
-
if i have a copy of an old back up file from the mobilesync file in my computer, could i delete the one that is in the file now and replace with an old one to restore from?
-
Is there a fix for the DW Pop-Up menu working in IE 5.5?