Exchange server 2010 console not opening, inialization failed

hi,
exchange server 2010 console not opening, inialization failed when i have upgraded service pack to sp1.
please suggest asap or u can reach me @
[email protected]
[email protected]
+918750003544

Even I found the same issue once, and then I realised that the SP and RU should be same in exchange sever and the machine where the issue is.
Could you please check the same if that machine has the same Sp and RU, if not, please upgrade the same? I bet it will start working
Regards,
ASP20
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Similar Messages

Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
Marty

I recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

KB953804 for delegatesentitemsstyle in Outlook 2003 in combination with Exchange Server 2010 SP1 not working.

KB953804 Full title "Hotfix for An e-mail message does not appear in a user's mailbox if the e-mail message was sent on behalf of the user by a delegate in Outlook 2003."
We have this working for ok Outlook 2003 SP3 in combination with Exchange Server 2003 SP2. Now for mailboxes that are moved to our new Exchange 2010 environment the hotfix stopped working. The sent items get stuck in the outbox of the delegate instead
of moving to the user in whose name the mail was sent. It does not matter if the user mailbox is on 2003 or 2010 as long as the delegated user is on Exchange 2010 SP1 it fails. We use Outlook 2003 SP3 in online mode. Does anyone know how to fix this
or maybe someone knows an alternative way to move the mails to the sent items with Exchange2010 SP1.

Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu

Application server control console not opening

Hi all,
I have installed oracle XE,oracle application server10.1.3.1.0 and Oracle Business Intelligence. But now when i try to Application server control page i get a http 404 error. I have also changed the default-web-site.xml file and set its ohs-routing to "true". Even then it is not working. Moreover i do not find any services for application service in the windows services. Please help me solve this. It is very important and urgnent.
Thanks in advance..

Hi,
I assume this is OAS 1013x.
Be default the em application is enabled only for home.
+ check the status of the application with opmnctl status -app
+ Ensure that the ascontrol application is deployed in the container and its up. If not deploy it and check whether <web-app application="ascontrol" name="ascontrol" load-on-startup="true" root="/em" /> is added in default-web-site.xml
Hope this helps
Thanks
Priya

Exchange Server 2010 SP3 Databases are not mounting after the recovery process

Hi,
We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
it.
I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
Please help me with your valid comments to solve and mount the database and close the issue for ever.
With Regards
Jay

Jared is correct that in essence the message is saying the DB cannot be found.
When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
When you restored into the recovery site do you have AD restored into that site as well?
For the recovery server are you using iSCSI storage for it as well? If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
and test/recovery server?
I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB. If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
http://www.lucid8.com/product/digiscope.asp using a free DEMO license. If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Event logs fails to start on Exchange Server 2010

My Exchange server 2010 R2 SP1 Enterprise single server is down. All exchange services fail to start. It appears like the Microsoft Exchange Active Directory Topology service isn't starting which is a dependency for all other services.
The error I get when trying to start this service is:
Windows could not start the Microsoft Exchange Active Directory Topology on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code
-2147024882
To make matters worse, the event viewer is not starting either.
When trying to start the Windows Event Log, I get the error:
Windows could not start the Windows Event Log service on Local Computer. Displays Error code 5
This is running on a Windows Server 2008 R2 SP1 Standard box.
Any assistance is appreciated.

When trying to start the Windows Event Log, I get the error:
Windows could not start the Windows Event Log service on Local Computer. Displays Error code 5
Hi,
Based on this error, this problem happens if any of the following conditions are true:
The built-in security group EventLog does not have permissions on the folder %SystemRoot%\System32\winevt\Logs
The Local Service account does not have default permissions on the following registry key: HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability
To solve this problem, we need to restore the default permissions in the list below on %SystemRoot%\System32\winevt\logs.
Authenticated user - List folder/read data, Read attributes, Read Extended attributes, Read permissions
Administrators - Full control
SYSTEM - Full control
EventLog - Full control
Please try the following methods:
Method 1
To restore the default permissions on folder %SystemRoot%\System32\winevt\logs, follow these steps.
Right-click on %SystemRoot%\System32\winevt\logs and select Properties.
Select the Security tab.
Click Edit button and click the Add button in the permissions dialog box.
In Select users, computers, or Groups dialog box ensure that under object types Built in Security Principals and the location as local computer name is selected.
Enter the object name as "NT SERVICE\EventLog" without quotes. And click OK. This group should have full control on the folder.
Once EventLog group is added add the rest of the groups with above mentioned permissions.
Method 2
Identify a Windows Server 2008 machine with default permissions.
Click Start, and then type cmd in the Start Search box.
In the search results list, right-click Command Prompt, and then click Run as Administrator.
When you are prompted by User Account Control, click Continue.
Type the command CD %SystemRoot%\SYSTEM32.
Once the working directory is changed to %SystemRoot%\SYSTEM32 type the command icacls winevt\* /save acl /T.
This will save a file named ACL in %SystemRoot%\SYSTEM32. Copy this file to the C: drive on the problem computer.
On the problem computer, open command prompt with administrator privileges (refer to previous steps 1-3).
Change the working directory to %SystemRoot%\SYSTEM32.
Execute the command icacls winevt\ /restore acl.
Default permissions on the registry key HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability should be:
CREATOR OWNER - Full control
SYSTEM - Full control
LOCAL SERVICE - Query Value, Set Value, Create Subkey, Notify and Delete
Administrators - Full control
Users - Read
To set the permission on this registry key:
Click the Start menu, select Run and type Regedit.
Go to the location HKLM\Software\Microsoft\Windows\CurrentVersion\Reliability.
From the Edit menu click Permissions.
Add the permissions for the accounts as listed above.
In addition, Exchange 2010 SP1 and SP2 are end of support.
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?alpha=exchange%20server%202010&Filter=FilterNO
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
Mailbox All Database Services - Default-First-Site-Name
Mailbox Database Service - Management - test.local
Mailbox Database Service - PublicFolders - test.local
Mailbox Database Service - Users - test.local
Mailbox Many Database Service - Default-First-Site-Name
OfflineAddressBook Service - Default-First-Site-Name
Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
log on Exchange server itself.

Hi There,
Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
Also is Agent proxy enabled ?
Also is the Action account of the Agents System or Domain account ?
Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
Gautam.75801

Exchange Server 2010 - OWA, ECP, EWS not working

Hello,
I am evaluating exchange server 2010. I was able to install it, but now the admin websites will not render in IIS. OWA, ECP, etc. I especially want Outlook Anywhere to work. I can admin through the windows admin interface so that's not a concern.
I want users to access their email through the web as well. I checked permissions but could have them wrong. Any help is appreciated.
Thanks
John Grace

There are about twenty different types of 403 error. To see which one is happening here, you'd need to look at the IIS log files, and get the status subcode, which is the number after the 403 in the logged line.
The most common, though, is 403.4, which means 'SSL Required'. What happens if you go to
https://servername (i.e. https instead of http).
Another one is 403.6, which means that IIS has been configured to only allow access to a certain range of IP address, and the one you're trying to access it from isn't one of them.
OWA For SmartPhone

Exchange Server 2010: Incoming mail not delivered

I have an Exchange Server 2010 Standard with all recent patches and updates.
-It has been in service for 3 years without any issues.
-There is plenty of hard drive space for the logs and the data (over 100GB in each)
-The current size of the mail database is 150GB
-There is no registry entry in place limiting the size of the database ([url="http://technet.microsoft.com/en-us/library/bb232092.aspx"]Database Size Limit in GB as outlined here[/url]
Starting a few days ago, incoming mail is reaching the server but not being delivered to user mailboxes. Internal mail works fine when this happens. Looking at the Queue Viewer doesn't show anything abnormal. The Submission Queue shows nothing.
It is only after I reboot the Exchange Server that the Submission queue will show all the messages waiting to be delivered and they will all be delivered successfully after the reboot. The event logs do not show any error messages.
The server will continue to run fine for a few hours and then the problem starts all over again.
What could be causing this?

Any 3rd party antivirus/anti-spam software installed on the server? If so, disable and test.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange server 2010 backup fails

My exchange server backup keep failing
the exchange server 2010 two node dag
netbackup 7.6
I have contacted Symantec support. They believed it's Exchange server problem as "Vssadin list writers"
show Microsoft Exchange writer Retryable error
Any help?

Hi,
Please try to restart Information Store service for testing.
Also try to refer following blogs:
Troubleshooting Exchange 2007 VSS Backups
http://blogs.technet.com/b/exchange/archive/2008/08/25/3406172.aspx
Exchange and VSS -- My Exchange writer is in a failed retryable state
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
Thanks
Mavis Huang
TechNet Community Support

Exchange Server 2010 - Authentication fails with DC

I have implemented Windows Server 2008 R2 Active Directory on Server: DC1
I have Implemented Exchange Server 2010 SP2 on Server: EMLSERVER
Previously MDeamon 5.5 was using for Messaging Services.
Manager told me he want only email server to be available after office hours.
For Exchange Server 2010 we have to power on two servers AD and EXCH.
For This reason i install AD on Exchange Server 2010 and Transfer all Roles from DC1 to EMLSERVER.
Now EMLSERVER is our AD and EXCH, and DC1 is our ADC.
To check this configuration i power off current ADC old DC (DC1).
when i try to test OWA, it was not working, and i get HTTP 500 Error, i try to troubleshoot it and finally after enabling Form Based Authentication Service HTTP 500 error has been resolved and i get OWA Page there when i try to Authenticate with Username
and Password i have got HTTP 400 error and i am sucked now.
Can anyone suggest what should i do now.

The Requirement is that I have to provide a solution that is equivalent to MDeamon 5.5, where Company have just one DC which is use for authentication and group policy on Windows and another server which is MDeamon email server.
After office hours they power off DC and just email server is power on.
Therefore new solution must fulfill the same requirement, and in this scenario I have to put DC and Email together so that there is no power overhead.
1- Yes new DC which is together with Exchange is Global Catalog.
2- All Microsoft Exchange services are running.
3- There is no smart card authentication, there is just User/Pass require to authenticate.
4- Old DC/ Current ADC has been powered off after verifying transfer of all AD roles.
5- Previously I have installed DC on DC1 server and Exchange 2010 on EMLSERVER and it was working fine.

BlackBerry Not showing e-mail subfolders configured on my Exchange Server 2010

Salutations Good People,
I recently activated my Blackberry Curve 8520 with my BlackBerry Entreprise Server which is synced with Ms Exchange server 2010, the problem is that on my Curve i can only see emails sent to my Inbox but any emails under my Exchange Mailbox subfolders are not being displayed on my Curve although the actual subfolder are shown on my Curve but inside them there is always empty, Please assist
Kindest Regards
Benjie

Hi benjrix
To receive emails that arrive in subfolders, you will have to enable folder redirection. The following article will show you how to configure folder redirection for your BlackBerry® smartphone.
KB04297 - How to configure folder redirection to receive email messages delivered to folders other t...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed

Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
Voon

Thank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :)

Trouble Connecting iPad and iPhone to Exchange Server 2010

Exchange Server 2010.
I have found some online instructions for connecting iPhones and iPods (or iPads) to Exchange Server 2010 using activesync. I enter all the information as I understand it (the same info used to successful connect Droids), and I do not get an error
until I try to sync (retrieve mail) the first time. Then it says, "The connection to the server failed."
In the instructions I follwed it has this statement, "Before we get started, please be sure your administartor has purchased you an Activesync license and assigned to
your email address." What the heck does this mean and how can I accomplish it? I know activesync is working. So why do I need a "license"?
Any help will be appreciated.
Doug Pruiett Good News Jail & Prison Ministry Richmond, Virginia www.goodnewsjail.org

When I tested with the Microsoft Remote Connectivity Tester, it failed on the last step:
ExRCA is testing Exchange ActiveSync.
The Exchange ActiveSync test failed.
Test Steps
Attempting to resolve the host name mail.goodnewsjail.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 74.94.213.106
Testing TCP port 443 on host mail.goodnewsjail.org to ensure it's listening and open.
The port was opened successfully.
Testing the SSL certificate to make sure it's valid.
The certificate passed all validation requirements.
Test Steps
ExRCA is attempting to obtain the SSL certificate from remote server mail.goodnewsjail.org on port 443.
ExRCA successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=mail.goodnewsjail.org, OU=Domain Control Validated, Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona,
C=US.
Validating the certificate name.
The certificate name was validated successfully.
Additional Details
Host name mail.goodnewsjail.org was found in the Certificate Subject Common name.
Validating certificate trust for Windows Mobile devices.
The certificate is trusted and all certificates are present in the chain.
Test Steps
ExRCA is attempting to build certificate chains for certificate CN=mail.goodnewsjail.org, OU=Domain Control Validated.
One or more certificate chains were constructed successfully.
Additional Details
A total of 1 chains were built. The highest quality chain ends in root certificate OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US.
Analyzing the certificate chains for compatibility problems with Windows Phone devices.
Potential compatibility problems were identified with some versions of Windows Phone.
<label for="testSelectWizard_ctl12_ctl06_ctl02_ctl02_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
The certificate is only trusted on Windows Mobile 6.0 and later versions. Devices running Windows Mobile 5.0 and 5.0 with the Messaging and Security Feature Pack won't be able to sync. Root = OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy
Group, Inc.", C=US.
ExRCA is analyzing intermediate certificates sent by the remote server.
All intermediate certificates are present and valid.
Additional Details
All intermediate certificates were present and valid.
Testing the certificate date to confirm the certificate is valid.
Date validation passed. The certificate hasn't expired.
Additional Details
The certificate is valid. NotBefore = 2/19/2013 3:16:45 PM, NotAfter = 4/13/2016 1:07:13 AM
Checking the IIS configuration for client certificate authentication.
Client certificate authentication wasn't detected.
Additional Details
Accept/Require Client Certificates isn't configured.
Testing HTTP Authentication Methods for URL https://mail.goodnewsjail.org/Microsoft-Server-ActiveSync/.
The HTTP authentication methods are correct.
Additional Details
ExRCA found all expected authentication methods and no disallowed methods. Methods found: Basic
An ActiveSync session is being attempted with the server.
Errors were encountered while testing the Exchange ActiveSync session.
Test Steps
Doug Pruiett Good News Jail & Prison Ministry Richmond, Virginia www.goodnewsjail.org

Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

Hi
Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange Active Manager Server instances are created.
Will any can tell me why i am not getting any instance for MSExchange Active Manager on Exchange Server 2010 SP1.
Thanks
Sandeep Gupta
Sandeep Gupta

We are getting the below error on HUB/CAS server past 4 days continuosly.
Event ID- 106
Source - MSExchange Common
Description -
Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
categoryName)
Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
Could some one help me on the same.
Above steps can be follow to avoid this error???
Thanks in Advance.

Exchange server 2010 console not opening, inialization failed

Similar Messages

Maybe you are looking for