Exchange server 2010 exchange server 2013 sp1 2 servers one domain

Scenario : Existing Server - Small Business Server 2011 with exchange 2010 \ Additional server on domain server 2012 r2 with exchange 2013 sp1 \ exchange 2013 sp1 installed on the second server but the exchange toolbox snap in fails, EAC login credentials
will not log on, and the shell tries to log onto the exchange 2013 with access denied error but then logs into the existing 2010 exchange server. Any suggestions on how to get these two installs of exchange to play nicely? reasoning is to eventually migrate
everything over to the new exchange.

Hi,
Based on my experience, here are some troubleshooting:
1. Check if all your Exchange 2013 services are working properly.
2. Check if the login account is a member of Exchange management group. You can try another admin account.
3. Check your event log and find if there is any error.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Migrate from Exchange Server 2010 sp3 to 2013 sp1

I have one Exchange Server 2010 SP3 server (300 mailboxes) installed on Windows Server 2008 R2 SP1 with three major roles on it (CAS, MB and HT) - typical installation. Edge Transport server is not installed thus for controlling of mail flow
Symantec Messaging Gateway Virtual Appliance is used as Smart Host. UM server is not installed either. I set up test domain environment where I installed one domain controller (Windows Server 2008 R2 SP1) and one Exchange Server 2010 SP3 (Windows
Server 2008 R2 SP1) at first place and yesterday I did everything necessary to install Exchange Server 2013 SP1 on new test virtual server running Windows Server 2012 R2 which I successfully did.
Now in test domain I have two Exchange Servers (2010 SP3 and 2013 SP1). Is there any 100% reliable documentation with all actions that had to be taken in order to successfully migrate Exchange Server 2010 SP3 to 2013 SP1? I would want to know what
needs to be done not only for my scenario but also for other scenarios (DAG, CAS array, Edge, UM, multiple HT servers . . .) since I am interested in digging deep into Exchange Server 2013.

Hi BoxiKG,
In addition to the above mentioned, and this for your reference:
Upgrade from Exchange 2010 to Exchange 2013
http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
Best regards,
Eric

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
Saidireddy

Hi
your little question, could have a big big answer, or answers ;)
To complete your question, ai will try
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
Depends on you to read, learn and ask , punctually about one issue/problem/request
I recommend you to bing the net
http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Lync Server 2010迁移升级Lync Server 2013时Lync Server控制面板无法打开Lync Server 2013

Lync Server 控制面板打开Lync Server 2010正常，打开Lync Server 2013报错未授权：授权失败。前端服务器日志显示如下：
日志名称:          Lync Server
来源:            LS Remote PowerShell
日期:            2014/4/1 10:40:41
事件 ID:         35005
任务类别:          (3500)
级别:
错误
关键字:
经典
用户:
暂缺
计算机:           lync13fe01.byd.com
描述:
远程 PowerShell
无法从存储中读取 RBAC 角色信息。
远程 PowerShell
在尝试读取用户的 RBAC 角色信息时遇到问题。Retry failed。异常: SqlConnectionException。失败原因:
用户 'DL\LYNC13fe01$' 登录失败。。堆栈跟踪:
在 Microsoft.Rtc.Management.Store.Sql.XdsSqlConnection.ReadDocItems(ICollection`1 key)
在 Microsoft.Rtc.Management.ScopeFramework.AnchoredXmlReader.Read(ICollection`1 key)
在 Microsoft.Rtc.Management.WritableConfig.AnchoredXmlSchemaCache.get_Item(ScopeClass scopeClass)
在 Microsoft.Rtc.Management.Authorization.OcsRunspaceConfiguration.GetRolesFromStore(ManagementConnection connection)
原因:
发生失败可能是由于读取管理存储时出现某个权限问题。
解决方法:
确保服务器是加入域的计算机且能够查询 Active Directory。
事件 Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Remote PowerShell" />
    <EventID Qualifiers="52652">35005</EventID>
    <Level>2</Level>
    <Task>3500</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-01T02:40:41.000000000Z" />
    <EventRecordID>7400</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>lync13fe01.byd.com</Computer>
    <Security />
</System>
<EventData>
    <Data>Retry failed</Data>
    <Data>SqlConnectionException</Data>
    <Data>用户
'DL\LYNC13fe01$' 登录失败。</Data>
    <Data>
在 Microsoft.Rtc.Management.Store.Sql.XdsSqlConnection.ReadDocItems(ICollection`1 key)
在 Microsoft.Rtc.Management.ScopeFramework.AnchoredXmlReader.Read(ICollection`1 key)
在 Microsoft.Rtc.Management.WritableConfig.AnchoredXmlSchemaCache.get_Item(ScopeClass scopeClass)
在 Microsoft.Rtc.Management.Authorization.OcsRunspaceConfiguration.GetRolesFromStore(ManagementConnection connection)</Data>
</EventData>
</Event>

Hi,
This forum is only English Supported.
Did you use the same account to open Lync Server 2013 control panel with Lync Server 2010 Control Panel?
If not, please check the account that is assigned to the CsAdministrator role.
On your Lync Server 2013 Front End Server, open IIS, expand Lync Server Internal Web Site. Click cscp, then click Browse *:443 in Actions panel to check if you can open Lync Server 2013 Control Panel.
Check your Domain Controller is available. You can ping it on Lync Server 2013 Front End Server.
Lisa Zheng
TechNet Community Support

Renaming Project Server 2010 database server

Hi all,
We have Project Server 2010 + SQL Server 2008 R2, but we need to upgrade DB to cluster SQL Server 2012 Enterprise Edition
SP1 CU7.
Is it ok if we rename Project Server DB server , for example from DBSER05 to DBSRVCL07\APPDB ?

As you planning to upgrade SQL server from 2008 r2 to sql server 2012 enterprise edition SP1 CU7.
In this case you have to create your farm from scratch. You have to Create your APP server and FE server all together from scratch and then you have to give your new DB server name DBSRVCL07\APPDB while creating farm.Once you run the configuration
wizard their you have to specify the NEW DB name DBSRVCL07\APPDB it will create Sharepoint config and content.
then you can restore your current project server DBs on new DB cluster server DBSRVCL07\APPDB and create project WEB APP where you can point restored project server DBs.
It means it would be all together back up and restore on new hardware.
i am just guessing if you think you will only upgrade Sql server, create cluster and rename proejct server DB server name in the existing farm that will not work.
Only approach is take back up and restore onto new infrastructure.
http://azlav.umtblog.com/2011/06/07/project-server-2010-database-restore-part-i/
if we rename Project Server DB server , for example from DBSER05 to DBSRVCL07\APPDB-- If you will only rename project
server DB server name then it wont work as project server also uses sharepoint config and content DB which are setting on old DB server name(we give db server name while running wizard) and it will throw errors.
kirtesh

What is the order for upgrading exchange server 2013 SP1 servers to CU7?

Hi All
I am planning to upgrade my exchange server 2013 SP1CU4 to CU7 . As per my understanding , we always proceed with the CAS servers and then the Mailbox Servers during up-gradation.
But I am confused now , since I have seen articles stating , that the Mailbox servers has to be upgraded first and then the CAS servers in exchange 2013.
What will be the correct order . My environment consists of 2 Mailbox servers in DAG and 2 CAS servers (Exchange server 2013 SP1)
Thanks in Advance .
Joyso Senior Messaging Admin

Hi Joyso,
The Microsoft recommendation regarding the order in which the Exchange 2013 server roles should be installed or Upgraded is Mailbox and then CAS.
It makes sense as the CAS Role is a stateless server and all major components are held by the Mailbox Role.
Until a 2013 mailbox server comes online, the CAS server is pretty much useless. Hence, the recommended installation order in 2013 is the reverse of 2010 – Mailbox role first & then CAS
Note: If your DAG have more nodes, you need first upgrade all non-PAM nodes and then upgrade PAM node.
Some References:
The recommendation from the Product Group is to install Exchange 2013 Preview Mailbox Role first, and then the
CAS role.
If you're separating your server roles, we recommend installing the Mailbox server role first.
Upgrade your Exchange 2013 server roles in the required order. First, upgrade Mailbox servers
and then upgrade Client Access servers. -Upgrade DAG Mailbox servers
Exchange 2013 Server Roles Installation Order – Mailbox First:
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Installing Exchange server 2010 on Server 2012

I understand that SP3 supports Server 2012.
Looking at the size of the extracted files on SP3 this is not a slipstreamed later version of Exchange right?
Am I also right in thinking, I just need to:-
- Update the schema and Domain prep it
- Use the Exchange 2010 with SP1 disk to complete base install and then apply SP3
Does that sound about right?

Hi,
Apart from the suggestions above, before you decide to install Exchange 2010, please make sure you meet the Exchange 2010 installation prerequisites. For more details about Exchange 2010 prerequisites, you can refer to the following article.
http://technet.microsoft.com/en-gb/library/bb691354(v=exchg.141).aspx
And here is a related article about how to prepare Active Directory and domains for installing Exchange Server 2010 which may help you.
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Hope this helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

How to install Exchange Server 2010 with the name of my existing Domain Controller.

I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)

Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Decommissioning Exchange 2010 Casarray (contains 2013 Mailbox Servers?)

I'm in the process of decommissioning exchange 2010. I went to remove the 2010 casarray and see that my 2013 mailbox servers are a part of the array? Can I still remove the array? Do I leave it?

Hi,
Please have a look in to the below mentioned article especially the reply from Off2work
http://social.technet.microsoft.com/Forums/office/en-US/c10550fa-b735-48ee-ad52-a75f0176e1de/cas-array-in-exchange-2013?forum=exchangesvrdeploy
As an additional info , as per my knowledge there is no use of cas array in exchange 2013 and at the same time exchange 2013 servers will not make use of it even though if it is an member of an casarray in exchange 2010.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Error moving mailbox from 2003 Exchange to 2010 Exchange

Hi everyone
I am having some trouble moving a mailbox from our Exchange 2003 server and over to our Exchange 2010 server. at this point i have moved 300 users, but this one here is causing some grief. It stops at 10% Any ideas????
23/06/2012 21:35:28 [VMPRIEXCH] 'ad.DNSArrow.co.uk/Admin Accounts/RJ Admin' created move request.
23/06/2012 21:35:28 [VMPRIEXCH] 'ad.DNSArrow.co.uk/Admin Accounts/RJ Admin' allowed a large amount of data loss when moving the mailbox (250 bad items).
23/06/2012 21:35:30 [VMPRIEXCH] The Microsoft Exchange Mailbox Replication service 'VMPRIEXCH.ad.DNSArrow.co.uk' (14.2.247.1 caps:07) is examining the request.
23/06/2012 21:35:30 [VMPRIEXCH] Connected to target mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)', database 'SHAREDMBDB', Mailbox server 'VMPRIEXCH.ad.DNSArrow.co.uk' Version 14.2 (Build 247.0).
23/06/2012 21:35:30 [VMPRIEXCH] Connected to source mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)', database 'EX01\SG2\Mailbox Store SG2 C', Mailbox server 'ex01.ad.DNSArrow.co.uk' Version 6.0 (Build 7654.0).
23/06/2012 21:35:41 [VMPRIEXCH] Request processing started.
23/06/2012 21:35:41 [VMPRIEXCH] Mailbox signature will not be preserved for mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)'. Outlook clients will need to restart to access the moved mailbox.
23/06/2012 21:35:41 [VMPRIEXCH] Source mailbox information before the move:
Regular Items: 189917, 5.272 GB (5,660,371,162 bytes)
Regular Deleted Items: 2491, 135 MB (141,547,842 bytes)
FAI Items: 2490, 0 B (0 bytes)
FAI Deleted Items: 0, 972 B (972 bytes)
23/06/2012 21:35:49 [VMPRIEXCH] Fatal error MapiExceptionNotFound has occurred.
Error details: MapiExceptionNotFound: Unable to GetSearchCriteria. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=48]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=98][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetSearchCriteria [49]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=53]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 29310
Lid: 23998 StoreEc: 0x8004010F
Lid: 29329
Lid: 19729 StoreEc: 0x8004010F
Lid: 23185
Lid: 25233 StoreEc: 0x8004010F
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiContainer.GetSearchCriteria(Restriction& restriction, Byte[][]& entryIds, SearchState& state)
at Microsoft.Exchange.MailboxReplicationService.LocalFolder.Microsoft.Exchange.MailboxReplicationService.IFolder.GetSearchCriteria(RestrictionData& restriction, Byte[][]& entryIds, SearchState& state)
at Microsoft.Exchange.MailboxReplicationService.FolderWrapper.<>c__DisplayClass19.<Microsoft.Exchange.MailboxReplicationService.IFolder.GetSearchCriteria>b__18()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.FolderWrapper.Microsoft.Exchange.MailboxReplicationService.IFolder.GetSearchCriteria(RestrictionData& restriction, Byte[][]& entryIds, SearchState& state)
at Microsoft.Exchange.MailboxReplicationService.FolderRecWrapper.EnsureDataLoaded(IFolder folder, FolderRecDataFlags dataToLoad, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass4`1.<LoadFolders>b__0()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.LoadFolders[TFolderRec](FolderRecDataFlags dataToLoad, PropTag[] additionalPtags, GenericCallDelegate abortDelegate, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.GetFolderMap[TFolderRec](FolderRecDataFlags dataToLoad, PropTag[] additionalPtags, GenericCallDelegate abortDelegate, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.GetSourceFolderMap(GetFolderMapFlags flags, FolderRecDataFlags dataToLoad, GenericCallDelegate abortDelegate)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<CreateFolderHierarchy>b__2d(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CreateFolderHierarchy(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IFolder.GetSearchCriteria
OperationSide: Source
Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)
Search folder: 'MS-OLK-BGPooledSearchFolder28E6C24EFE39F845A1C7309FF139D54F', entryId [len=46, data=00000000ED492DE46CCB2941A6EFC600B0DC8ABD010062EB1CE91779304984F59E79C254E5430000033BC7BF0000], parentId [len=46, data=00000000ED492DE46CCB2941A6EFC600B0DC8ABD010062EB1CE91779304984F59E79C254E54300000015852B0000]
23/06/2012 21:35:50 [VMPRIEXCH] Removing target mailbox 'Primary (c8e0ea6b-eec7-4da0-8ea5-e031a91cc984)' due to an offline move failure.
23/06/2012 21:35:50 [VMPRIEXCH] Relinquishing job.
Regards
Ronnie
Ronnie Jorgensen | MCTS Windows Server 2008

Hi ,
Maybe we can configure BadItemLimit for it .
New-MoveRequest:
http://technet.microsoft.com/en-us/library/dd351123.aspx
More information for your reference.
Can not move Exchange 2003 mailboxes to Exchange 2010:<//span>
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/89902f00-4b84-4f10-b909-121a81241c85/
Wendy Liu
TechNet Community Support
Hi Wendy
BadItemLimit is already set to 250 mails and with accept data loss
New-MoveRequest -Identity 'vquotes' -TargetDatabase "DB06" -BadItemLimit 250 -AcceptLargeDataLoss
So that is not the problem :)
Ronnie Jorgensen | MCTS Windows Server 2008

Mac Mini Server (2010) & Windows Server 2008

Hi,
Would it be possible to boot, install and run Windows Server 2008 on the Mac Mini Server, replacing Snow Leopard Server OS? I assume I need the SuperDrive or similar DVD drive to realize this scenario.
Regards,
sb

Seems possible although I would say one needs some care to ensure that the cooling systems operate as needed.

Multiple email servers one domain

Probably a silly question.
I'd like to set up two email servers in my domain to receive mail for our company. I want one server to be the main server with all the user accounts and the other to be a back up store and forward server. When mail comes in, and the main server with user accounts is down, then I'd like the store and forward server to collect all email for our users and then forward it on when the main server comes back up.
So, I've set up two servers in my DNS with different preferences in their MX records - server1.mydomain.com with an preference of 10 in it's MX record. server2.mydomain.com with 20 in it's MX record. server1 is where all user accounts are located.
Now presume that server1 is down. Sending servers will query my DNS records, find out server1 is the preferred server discover it's not there and go to server2. If the email received by server2 has a user for this domain that is not located on this server, how does it know where to forward it and how do I set that up so I also don't have an open relay?
Thx.
J.

Bonjour
A iweb site is just a folder (SiteName folder). So you can have several folders in your server.
in iWeb sidebar, you can have several Sites like:
. SiteName1
. SiteName2
. SiteName3
if you publish your iWebsites to the same FTP server
you will have URL like this
SiteName1 ---> http://www.yourdomainname.com/SiteName1/ or http://www.yourdomainname.com/
SiteName2 ---> http://www.yourdomainname.com/SiteName2/
SiteName3 ---> http://www.yourdomainname.com/SiteName3/
You don't need subdomain. but you can use the SiteName folders created by iWeb to make some subdomains
SiteName1 ---> http://www.yourdomainname.com/ (it is not a subdomain)
SiteName2 ---> http://SiteName2.yourdomainname.com/
SiteName3 ---> http://SiteName3.yourdomainname.com/

Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

Hello Guys
I have a mailflow issue, hoping someone can help with detail description, below is the setup
Exchange server 2010 SP3 with all roles in one server
Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
queue ..
Can someone please provide detailed solution what needs to be configured?
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Upgrade Exchange Server 2013 SP1

Hello,
I have two Exchange 2013 SP1 servers with DAG configured. I want to upgrade them with CU8. Kindly advise how to do or is there any step by step document available for upgrading the DAG member server.
Thanks in advance.

yes you need to upgrade one at a time and putting them in maintenance mode
this article has step by step info
http://vanhybrid.com/2013/11/28/script-putting-exchange-server-2013-into-maintenance-mode/
Where Technology Meets Talent

DAG in exchange server 2010 across different sites

hello ;
I want to know the best way to implement DAG for exchange server 2010 across 2 sites in the same domain ,
I have 2 exchanger server in one site in DAG ,with 300 gb database size
but I want to implement exchange server 2010 in a new site within the same domain and this will be my 3rd exchange server and will be a member on my existing DAG in the head office
the new site is linked to my head office using ipvpn connection which is 6 mb , and ADC is there in the new site,
what is the best way to implement the new exchange server in the new site to join the existing DAG .
is there is any problem related to DAG in this scenario ?
what is the best way to implement this scenario ?
Thanks

Hi,
For each AD site, it is recommended to have at least there Exchange roles: CAS, HUB, and MBX roles.
Do you plan to have active users in this new site?
If there are active users in this new site, you can deploy a Three-Member DAG in two AD sites. However, it is recommended to deploy two DAGs in two AD sites and you should have at least two DAG members each AD site. This scenario, two witness servers in
separate site is necessary.
If the new site is only for DR purpose, you can install this new Exchange server and add it to DAG. After that, add database copy to this new server.
Besides that, here are two articles which may help you for your reference.
Database Availability Group Design Examples
http://technet.microsoft.com/en-us/library/dd979781(v=exchg.141).aspx
Understanding Database Availability Groups
http://technet.microsoft.com/en-us/library/dd979799(v=exchg.141).aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange server 2010 exchange server 2013 sp1 2 servers one domain

Similar Messages

Maybe you are looking for