Exchange Server 2010 with SP3 Management Tools

Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site.  If you want to connect to Remote Powershell, this service must be running.  Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

Similar Messages

  • How to install Exchange Server 2010 with the name of my existing Domain Controller.

    I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
    abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)

    Hi,
    From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
    What's more, here is a helpful blog about Exchange 2010 installation for your reference.
    HOWTO Install Exchange 2010 - Step by Step
    http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

    Dear all,
    first of all thanks for reading this topic :-)
    In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
    We are using Outlook Anywhere, Active Sync and OWA.
    Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
    Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
    To install the mailbox role, I think this will not affect anything.
    Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
    Any help would be appreciated!
    Jennie

    Hi Jennie,
    Below are the steps if you are not planning to upgrade.
    1) Install new Exchange2010-SP3 Server all roles Please check
    this
    2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
    this
    3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
    For OAB, Autodiscover, EWS please check steps 5,6,7in this
    For setting OWA and ECP URLs please check
    this.
    4) Move few mailboxes as a test and check. If no errors move the rest.
    5) Move your OAB generation server to the new server. Please check
    this
    6) Move you public folder contents to the new server you have. Please check
    this
    7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
    8)
    Add the new server as the source server and in the current send connector and remove the old server from the send connector.
    Shutdown the server for a couple of days and monitor. So you will know if you missed something.
    Uninstall Exchange2010 from the add remove programs.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Exchange server 2010 DAG configuration

    Dear Boss,
    I would like to configure Exchange server 2010 with DAG . I have test lab . i would like to tell my test LAB setup .
    One domain controller win-2008 X 64 Ent 
    Two Exchange server 2010  ( Role - Client Access, Mailbox) Each Server  Two Network Cards with Different Classes  
    IP  192.168.44.50 , 51
    IP  10.0.0.10 , 20
    One Exchange server 2010 ( Role - Hub Transport )
    IP 192.168.44.53
    Pls tell me how can i create DAG 
    Note:- i would like to test below steps 
    1. Exchange server1 may be down or network link down how server 2 to work automatically without any disturbance 
    2. Exchange server2 may be down or network link down down how server 1 to work automatically without any disturbance 
    3. Hub transport server maybe down how it can be work ?
    Regards
    Subash

    Hi Suriya,
    To create a DAG, simply use the below commands from Exchange Management Shell:
    New-DatabaseAvailabilityGroup -Name "DAGNAME" -WitnessServer HUBSERVERNAME
    Add-DatabaseAvailabilityGroupServer –Identity DAGNAME -MailboxServer ExchangeServer1
    Add-DatabaseAvailabilityGroupServer –Identity DAGNAME -MailboxServer ExchangeServer2
    New-MailboxDatabase -Name DB1 -Server
    ExchangeServer1
    Add-MailboxDatabaseCopy -Identity DB1 -MailboxServer
    ExchangeServer2
    You can run your tests now, by restarting any of the servers, and you should be able to see the DB1 will automatically failover & failback between the nodes with out any intervention.
    for the HUB transport you must have another server to achieve high availability, so you can install the HUB role on a different server or add it to one of your existing servers.
    Mohammad Saeed | MCSE 2003 | MCTS: Lync, OCS, Exchange

  • Exchange Server 2010 DAG requirement

    Hi i am configuring Exchange server 2010 with DAG. i read that Enterprise level OS must have needed for MS-Exchange DAG
    but i have 4 Windows Server 2012 standard. can i configure my DAG setup on it?
    It will be like 4 hyperv
    DAG Node 1 – Windows Server 2012 standard.(MS-Exchange 2010)
    DAG Node 2 – Windows Server 2012 standard.(MS-Exchange 2010)
    Domain Controller – Windows Server 2012 standard.
    FSW Server – Windows Server 2012 standard.
    Is it right environment setup for DAG?

    Hello,
    For Exchange 2010 DAG installation you need:
    1. Windows 2012 Standard or Datacenter.
    2. Windows 2008 R2 Enterprise or Datacenter.
    Each node of DAG must have the same version of OS, both version and edition.
    Your setup will be fully supported.
    Hope it helps,
    Adam
    http://www.codetwo.com/?sts=3470 If this post helps resolve your issue, please click the 'Mark as Answer' or 'Helpful' button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

  • How to install and configure Exchange Server 2010 DR (disaster recovery) on Windows server 2012.

    We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
    Pls suggest step by step.
    Pankaj Kumar

    Hi,
    Here is an article which may help you for your reference.
    Deploying High Availability and Site Resilience
    https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
    Besides, there is a related thread here.
    https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
    Hope this is helpful to you.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • Exchange Server 2010 SP3 Installation with UM Language Pack Error

    Hi All,
    Kindly help me in this issue, When I Install Exchange Server 2010 SP3, I faced an error in UM role setup as the below,
    and when i searched on it i found solution like "Download the UM language packs and tried to install directly" so i downloaded "UMLanguagePack.en-US" from the below URL:
    http://www.microsoft.com/en-eg/download/details.aspx?id=36769
    and when i tried to install it, i faced the below error:
    also i searched on this error and i found solution in registry as the below:
    Try remove registry key for the above error :
    "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\<Your Version >\UnifiedMessagingRole\LanguagePacks"
    and after i did it, i found first error be solved and the second error still the same as the below:
    Error:
    A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just
    this role, or remove the role using Control Panel.
    Is there a solution on this issue please i wanna solve it As soon as possible?
    Thanks in advance,

    I solved the below error by editing in registry:
    Error:
    A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just this role, or remove the role using Control Panel.
    Solution:
    Open regedit (Start -> run), navigate to the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14
    Under each role, UnifiedMessagingRole, have a look for an action and watermark entry, Delete these 2 keys, and retry. it solve this error, and You can now run the installation again of your "UMLanguagePack.en-US". and its done and installed now.
    After "UMLanguagePack.en-US" Installation, i tried to continue installation of Exchange Server 2010 SP3, but I faced the same first error in UM role setup as the below,
    What can i Do? please help urgently.

  • When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

    Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
    now, so I’m posting here in order to share this among others.
    Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
    Symptoms
    E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
    “#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
    user wasn’t found.> #SMTP#”
    Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
    “Log Name: Application
    Source: MSExchange Store Driver
    Event ID: 1020
    Level: Error
    Description:
    The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
    Cause
    In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
    Group) remains with a Servers container, but no servers inside it.
    During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
    Resolution
    To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
    Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
    2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
    at your own risk.
    1.      
    Start the ADSI Edit MMC Snap-in. Click Start, then
    Run, and type adsiedit.msc, and then click OK.
    2.      
    Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
    CN=Configuration,DC=DNSDomainName,DC=com.
    3.      
    Expand CN=Services, and then CN=Microsoft Exchange, and then expand
    CN=YourOrganizationName.
    4.      
    You will see an empty Administrative Group. Expand the
    CN=YourAdministrativeGroupName.
    5.      
    Expand CN=Servers.
    6.      
    Verify there are no server objects listed under the
    CN=Servers container.
    7.      
    Right click on the empty CN=Servers container and choose
    Delete.
    8.      
    Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
    Applies to
    Exchange Server 2010, Standard Edition
    Exchange Server 2010, Enterprise Edition
    Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
    | E-mail: [email protected]

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • Exchange Server 2010 SP3 Databases are not mounting after the recovery process

    Hi,
    We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
    same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
    with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
    An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
    it.
    I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
    For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
    Please help me with your valid comments to solve and mount the database and close the issue for ever.
    With Regards
    Jay

    Jared is correct that in essence the message is saying the DB cannot be found.
    When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
    When you restored into the recovery site do you have AD restored into that site as well?
    For the recovery server are you using iSCSI storage for it as well?   If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
    and test/recovery server?
    I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB.  If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
    http://www.lucid8.com/product/digiscope.asp using a free DEMO license.  If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
    DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Problems installing Mailbox role on Exchange Server 2010 SP3

    I am in the process of installing Exchange Server 2010 SP3 on a Windows Server 2012 server in order to migrate our existing Exchange 2003 server. Everything went well with the installation process until I went to add the Mailbox server role, which is giving
    me the following error (from the log file):
    [05/03/2013 21:58:09.0090] [1] Executing: 
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
    [05/03/2013 21:58:09.0105] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'TAM-FS2.tacomaartmuseum.org', Preferred Global Catalog: 'TAM-FS2.tacomaartmuseum.org', Preferred Domain
    Controllers: '{ TAM-FS2.tacomaartmuseum.org }'
    [05/03/2013 21:58:09.0105] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
    [05/03/2013 21:58:09.0276] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" 
    [05/03/2013 21:58:09.0344] [2] Process standard output: 
    [05/03/2013 21:58:09.0344] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
    [05/03/2013 21:58:09.0347] [2] [ERROR] Unexpected Error
    [05/03/2013 21:58:09.0347] [2] [ERROR] Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0350] [2] Ending processing Start-SetupProcess
    [05/03/2013 21:58:09.0350] [1] The following 1 error(s) occurred during task execution:
    [05/03/2013 21:58:09.0350] [1] 0.  ErrorRecord: Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0350] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0351] [1] [ERROR] The following error was generated when "$error.Clear(); 
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
            " was run: "Process execution failed with exit code 87.".
    [05/03/2013 21:58:09.0351] [1] [ERROR] Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0351] [1] [ERROR-REFERENCE] Id=MailboxComponent___13A8A6B7DE0A4fe3BEB5CB1D86105DA3 Component=EXCHANGE14:\Current\Release\PIM Storage\Content Indexing
    [05/03/2013 21:58:09.0351] [1] Setup is stopping now because of one or more critical errors.
    [05/03/2013 21:58:09.0351] [1] Finished executing component tasks.
    [05/03/2013 21:58:09.0393] [1] Ending processing Install-MailboxRole
    I've searched all over but can't seem to find any reference to "exit code 87" - does anyone have any ideas?
    Thanks,
    Matt

    Error 87 -with these details below - and a fix. The situation that got me here by the way was an incomplete install that was uninstalled, then installed again.
    [02/24/2014 06:49:06.0967] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'xxxxxxxxxxxxxxx', Preferred Global Catalog: 'xxxxxxxxxxxxxxxxxxxxxxxx', Preferred Domain Controllers:
    '{ xxxxxxxxxxxxxxxxxxxxxxx }'
    [02/24/2014 06:49:06.0967] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
    [02/24/2014 06:49:06.0967] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
    [02/24/2014 06:49:07.0592] [2] Process standard output:
    [02/24/2014 06:49:07.0592] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
    [02/24/2014 06:49:07.0592] [2] [ERROR] Unexpected Error
    [02/24/2014 06:49:07.0592] [2] [ERROR] Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0592] [2] Ending processing Start-SetupProcess
    [02/24/2014 06:49:07.0592] [1] The following 1 error(s) occurred during task execution:
    [02/24/2014 06:49:07.0592] [1] 0.  ErrorRecord: Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0592] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0608] [1] [ERROR] The following error was generated when "$error.Clear();
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
            " was run: "Process execution failed with exit code 87.".
    [02/24/2014 06:49:07.0608] [1] [ERROR] Process execution failed with exit code 87.
    I found I could fix this by removing the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Microsoft-Exchange-Troubleshooters/Operational
    and everything underneath it.
    My guess is that wevtutil didn't like adding an event log where it already existed but was slightly different in setup (no idea how, exactly).
    After 24 hours I'll try post again - giving things time to make sure they are actually working.

  • Exchange Server 2010 SP3 test environment - email flow to/from internet

    Today I set up test environment for Exchange Server 2010 SP3 - domain controller running Windows Server 2008 R2 SP1, Exchange Server 2010 SP3 on Windows Server 2008 R2 SP1 and client computer running Windows 7 Pro SP1 x64 with Outlook Pro 2010 x64. These
    machines are VMs on vSphere 5.0 cluster made of 4 esxi 5.0 hosts.
    I have three years of experience in working with Exchange Server 2010 in my production environment but until recently I have not had enough resources to build a test environment. Does "testing" Exchange Server 2010 infrastructure have
    a real life purpose considering the fact that only internal email flow is possible since authoritative SMTP accepted domain is not hosted anywhere thus not visible to outside world. This limited email flow combined with absence of possibility to test
    ActiveSync, Outlook Anywhere, OWA from WAN, . . . really hurt and make Exchange Server rare technology that can not be tested completely before introducing something new into the production. Services that are not possible to test from the outside world are
    useless and whole point of Exchange-like technologies is availability from anywhere and from whatever device.

    I set up Internet Send Connector (by default this type of send connector uses DNS MX records to route email automatically). Having sent an email to my gmail account I did not receive it and in transport logs I saw that mx record was found successfully
    but there is the following line:
    2014-08-05T20:39:51.942Z,Internet Connector,08D17F000FE36010,1,,2a00:1450:4013:c01::1b:25,*,,"Failed to connect. Error Code: 10051, Error Message: A socket operation was attempted to an unreachable network 2a00:1450:4013:c01::1b:25"
    I tried also to send an email to my production email address (we have Symantec Messaging Gateway which is used as a smart host (antispam,antimalware,content filter appliance)) but then error is:
    2014-08-05T20:50:08.395Z,Internet Connector,08D17F000FE36019,1,,91.238.7.10:25,*,,"Failed to connect. Error Code: 10061, Error Message: No connection could be made because the target machine actively refused it 91.238.7.10:25"
    Telnet from test exchange to 91.238.7.10 on port 25 also is not working.

  • SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

    Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
    Mailbox All Database Services - Default-First-Site-Name
    Mailbox Database Service - Management - test.local
    Mailbox Database Service - PublicFolders - test.local
    Mailbox Database Service - Users - test.local
    Mailbox Many Database Service - Default-First-Site-Name
    OfflineAddressBook Service - Default-First-Site-Name
    Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
    log on Exchange server itself.

    Hi There,
    Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
    Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
    Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
    Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
    Also is Agent proxy enabled ?
    Also is the Action account of the Agents System or Domain account ?
    Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
    Gautam.75801

  • Migrate from Exchange Server 2010 sp3 to 2013 sp1

    I have one Exchange Server 2010 SP3 server (300 mailboxes) installed on Windows Server 2008 R2 SP1 with three major roles on it (CAS, MB and HT) - typical installation. Edge Transport server is not installed thus for controlling of mail flow
    Symantec Messaging Gateway Virtual Appliance is used as Smart Host. UM server is not installed either. I set up test domain environment where I installed one domain controller (Windows Server 2008 R2 SP1) and one Exchange Server 2010 SP3 (Windows
    Server 2008 R2 SP1) at first place and yesterday I did everything necessary to install Exchange Server 2013 SP1 on new test virtual server running Windows Server 2012 R2 which I successfully did.
    Now in test domain I have two Exchange Servers (2010 SP3 and 2013 SP1). Is there any 100% reliable documentation with all actions that had to be taken in order to successfully migrate Exchange Server 2010 SP3 to 2013 SP1? I would want to know what
    needs to be done not only for my scenario but also for other scenarios (DAG, CAS array, Edge, UM, multiple HT servers . . .) since I am interested in digging deep into Exchange Server 2013.
     

    Hi BoxiKG,
    In addition to the above mentioned, and this for your reference:
    Upgrade from Exchange 2010 to Exchange 2013
    http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
    Best regards,
    Eric

  • Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

    Hello Guys
    I have a mailflow issue, hoping someone can help with detail description, below is the setup
    Exchange server 2010 SP3 with all roles in one server
    Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
    to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
    server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
    queue ..
    Can someone please provide detailed solution what needs to be configured?
    MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

    Hi,
    1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
    2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
    3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
    4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
    I think I need to create a receive connector in the 2013 to receive from 2010 ?
    No need ,by design  exchange 2013 cas server default frontend receive connector will be having an
    entire ipv4 and ipv6 segment and anonymous connection is checked by default.
    I think I also need to create a send and receive connector for 2013 users to each other?
    No need , an intra organisation send connector and the default receive connectors in exchange will be used
    for internal mail flow between the exchange 2013 users.
    Please reply me if you have any queries .
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

Maybe you are looking for