Exchange Server 2013 CU7 Upgrade Failed

I am trying to upgrade Exchange Server 2013 SP1 to CU7 but after complete 46% of Mailbox Role Transport Service the Upgrade Failed and automatically rebooted the server. After restart its showing memory dump. How can we solved it.

Hi livesayed,
According to your description, we cannot get the key of this question.
Would you please help to collect related event log or setup log? It’s more helpful for further troubleshooting.
Besides, I find an similar thread about Exchange 2013 CU2 upgrade to CU3 Failed at Front End Transport Service, for your reference:
https://social.technet.microsoft.com/Forums/office/en-US/32e06b5b-76bb-45d0-bf99-0b83c3182199/exchange-2013-cu2-upgrade-to-cu3-failed-at-front-end-transport-service?forum=exchangesvrdeploy
Best Regards,
Allen Wang

Similar Messages

Exchange Server 2013 on Srvr2012r2 fails on preinstall

During the preinstall of the Exchange server 2013 on virtual Server 2012r2 the installation fails at the second step of the preinstall. I tried the wizard and it also fails station the user does not have the correct rights.
This was probably caused by myself. When I first installed the Exchange I did not install the client and mailbox items. When I found out this was an error I uninstalled it and tried to reinstall.
Bonnie Whalon

hi Bwhalon.. your both the commands are incorrect..
1. it misses a parameter required somwhere
2. the role service which you have asked to install is incorrect..may be mistyped
ok now you can use below two way ...
1. Command...
Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45,
Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service,
Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
take from http://technet.microsoft.com/en-us/library/bb691354%28v=exchg.150%29.aspx
after this you can start the install
2. Graphical install : check below links .. this is step by step procedure
http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
Let me know if this helps...
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Exchange Server 2013 CU7 Installation Issue

Error:
The following error was generated when "$error.Clear();
            if ($RoleProductPlatform -eq "amd64")
                try
                    # Need to configure the ETL traces before the fast service is installed. This will ensure that when the service comes up
                    # it will have the necessary trace session setting available to read from the registry
                    $fastPerfEtlTraceFolderPath = Join-Path -Path $RoleBinPath -ChildPath "\Search\Ceres\Diagnostics\ETLTraces"
                    $fastDiagnosticTracingRegKeyPath = 'HKLM:\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing'
                    if(-not(Test-Path -Path $fastPerfEtlTraceFolderPath))
                        $null = New-Item $fastPerfEtlTraceFolderPath -Type 'Directory' -Force
                    if (-not(Test-Path -Path $fastDiagnosticTracingRegKeyPath))
                        $null = New-Item -Path $fastDiagnosticTracingRegKeyPath -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'TracingPath' -PropertyType 'string' -Value $fastPerfEtlTraceFolderPath
-Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'TracingFileName' -PropertyType 'string' -Value 'DocumentProcessingTrace'
-Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'DocumentParserSuccessLogMessage' -PropertyType 'Dword' -Value 1 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'DocumentParserLoggingNoInitialisation' -PropertyType 'Dword' -Value 1 -Force
                    # Max trace folder size 50 * 100 = 5GB
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'MaxTraceFileSize' -PropertyType 'Dword' -Value 50 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'MaxTraceFileCount' -PropertyType 'Dword' -Value 100 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'UseGeneralSwitch' -PropertyType 'Dword' -Value 1 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'GeneralSwitch' -PropertyType 'Dword' -Value 1 -Force
                catch
                    # ETl tracing is not critical. Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while trying to Configure the FAST ETL traces. Exception: " + $_.Exception.Message);
                try
                    $fastFusionRegKeyPath = 'HKLM:\SOFTWARE\Microsoft\Office Server\16.0\Search\FlightControl'
                    if (Test-Path -Path $fastFusionRegKeyPath)
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_new_enabled' -Force -ErrorAction SilentlyContinue
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_old_enabled' -Force -ErrorAction SilentlyContinue
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_compare_outputs' -Force -ErrorAction SilentlyContinue
                catch
                    # Removing new fusion keys is not critical. Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while trying to remove the fast new fusion reg keys. Exception: " + $_.Exception.Message);
                $fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
                $command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
                $dataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";
                # Remove previous SearchFoundation configuration
                &$command -action u -silent;
                try
                    if ([System.IO.Directory]::Exists($dataFolderPath))
                        [System.IO.Directory]::Delete($dataFolderPath, $true);
                catch
                    $deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath + " - " + $_.Exception.Message;
                    Write-ExchangeSetupLog -Error $deleteErrorMsg;
                # Re-add the SearchFoundation configuration
                try
                    # the BasePort value MUST be kept in sync with dev\Search\src\OperatorSchema\SearchConfig.cs
                    &$command -action i -baseport 3800 -dataFolder $dataFolderPath -silent;
                catch
                    $errorMsg = "Failure configuring SearchFoundation through installconfig.ps1 - " + $_.Exception.Message;
                    Write-ExchangeSetupLog -Error $errorMsg;
                    # Clean up the failed configuration attempt.
                    &$command -action u -silent;
                    try
                        if ([System.IO.Directory]::Exists($dataFolderPath))
                            [System.IO.Directory]::Delete($dataFolderPath, $true);
                    catch
                        $deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath + "
- " + $_.Exception.Message;
                        Write-ExchangeSetupLog -Error $deleteErrorMsg;
                # Set the PowerShell Snap-in's public key tokens
                try
                    $PowerShellSnapinsPath = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\";
                    $FastSnapinNames = @("EnginePSSnapin", "HostControllerPSSnapIn", "InteractionEnginePSSnapIn", "JunoPSSnapin",
"SearchCorePSSnapIn");
                    $officePublicKey = "71E9BCE111E9429C";
                    $exchangePublicKey = "31bf3856ad364e35";
                    foreach ($fastSnapinName in $FastSnapinNames)
                        $fastSnapinPath = $PowerShellSnapinsPath + $fastSnapinName;
                        $assemblyNameProperty = Get-ItemProperty -Path $fastSnapinPath -Name "AssemblyName" -ErrorAction SilentlyContinue;
                        if ($assemblyNameProperty -ne $null -and (-not [string]::IsNullOrEmpty($assemblyNameProperty.AssemblyName)))
                            $newAssemblyName = $assemblyNameProperty.AssemblyName -ireplace ($officePublicKey, $exchangePublicKey);
                            Set-ItemProperty -Path $fastSnapinPath -Name "AssemblyName" -Value $newAssemblyName;
                catch
                    # Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while configuring Search Foundation PowerShell Snapin. Exception: " + $_.Exception.Message);
        " was run: "System.Exception: Failure configuring SearchFoundation through installconfig.ps1 - Error occurred while configuring Search Foundation for Exchange.System.ServiceModel.EndpointNotFoundException:
Could not connect to net.tcp://exchange.domain.com:3803/Management/InteractionEngine. The connection attempt lasted for a time span of 00:00:02.0470060. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.0.0:3803.
---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.0.0:3803
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Ceres.CoreServices.Admin.INodeOperationsManagementAgent.AddNamedNode(String node)
   at Microsoft.Ceres.Exchange.PostSetup.NodeManager.DeployInterationEngineNode()
   at Microsoft.Ceres.Exchange.PostSetup.DeploymentManager.Install(String installDirectory, String dataDirectoryPath, Int32 basePort, String logFile, Boolean singleNode, String systemName, Boolean attachedMode)
   at CallSite.Target(Closure , CallSite , RuntimeType , Object , Object , Object , Object , Object , Object , Boolean )
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Al

Hi,
Agree with ED.
The key message is “Could not connect to net.tcp://exchange.domain.com:3803/Management/InteractionEngine.
The connection attempt lasted for a time span of 00:00:02.0470060. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.0.0:3803”
You need to check why it’s block. Any firewall or the port is listened by other processes.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Error on install: exchange server 2013 cu7 install over the top of sp1

Running the update from elevated command prompt. Just finished two sets of windows updates and rebooted both times. Checked for updates and no more available. Run setup with accept policy command and receive this error just after the prerequisite check.
I've read that you just have to let the service finish but I've retried a few times with no luck.
Setup can't continue with the upgrade because the SFService (10544) has ope
n files. Close the process, and then restart Setup.

Hi Jon,
please try the following Exchange PowerShell command:
Set-ServerComponentState -Identity yourserver -Component PopProxy -Requester HealthAPI -State Active
Sounds like Your imap Proxy is bad.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

Hi,
From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
http://support2.microsoft.com/kb/2997209
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

What is the order for upgrading exchange server 2013 SP1 servers to CU7?

Hi All
I am planning to upgrade my exchange server 2013 SP1CU4 to CU7 . As per my understanding , we always proceed with the CAS servers and then the Mailbox Servers during up-gradation.
But I am confused now , since I have seen articles stating , that the Mailbox servers has to be upgraded first and then the CAS servers in exchange 2013.
What will be the correct order . My environment consists of 2 Mailbox servers in DAG and 2 CAS servers (Exchange server 2013 SP1)
Thanks in Advance .
Joyso Senior Messaging Admin

Hi Joyso,
The Microsoft recommendation regarding the order in which the Exchange 2013 server roles should be installed or Upgraded is Mailbox and then CAS.
It makes sense as the CAS Role is a stateless server and all major components are held by the Mailbox Role.
Until a 2013 mailbox server comes online, the CAS server is pretty much useless. Hence, the recommended installation order in 2013 is the reverse of 2010 – Mailbox role first & then CAS
Note: If your DAG have more nodes, you need first upgrade all non-PAM nodes and then upgrade PAM node.
Some References:
The recommendation from the Product Group is to install Exchange 2013 Preview Mailbox Role first, and then the
CAS role.
If you're separating your server roles, we recommend installing the Mailbox server role first.
Upgrade your Exchange 2013 server roles in the required order. First, upgrade Mailbox servers
and then upgrade Client Access servers. -Upgrade DAG Mailbox servers
Exchange 2013 Server Roles Installation Order – Mailbox First:
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Upgrade Exchange server 2013 to CU7 error

Dear Microsoft Team
I have Exchange server 2013 SP1 and upgrade it to CU5 it is working normal
But wen I try to Upgrade it to CU7 I got this error massage
Error:
The following error was generated when "$error.Clear();
          $maxWait = New-TimeSpan -Minutes 8
          $timeout = Get-Date;
          $timeout = $timeout.Add($maxWait);
          $currTime = Get-Date;
          $successfullySetConfigDC = $false;
          while($currTime -le $timeout)
            $setSharedCDCErrors = @();
            try
              Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
              $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
              if($successfullySetConfigDC)
                break;
              Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
            catch
              Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
            Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
            Start-Sleep -Seconds 30;
            $currTime = Get-Date;
          if( -not $successfullySetConfigDC)
            Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Best Regards
Rawa Zangana

Hi Rawa Zangana,
According to the error message, it seems that the Global Catalog not reachable from DC.
Please perform following steps.
1. Port 3268 listened on DC.
2. Enable Global Catalog role on all DCs.
3. Restart Exchange Server 2013 CU5.
4. Check whether Event 2080 found on all DCs, Event 2080 means that AD connectivity works fine.
5. Repeat CU7 installation.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Exchange Server 2013: no send/receive after failed CU1- CU2 and machine restore

Hi!
For several reasons, I decided to fully restore my Exchange Server 2013 machine today.
The machine is virtualized on Hyper-V.
I rebooted the server and recovered from backup and Exchange seems to be working fine. However, I cannot receive or send mail. If I try to send a message it goes to the "drafts" folder. OWA and EMC is working. I can not send mail between interna mailboxes
either. Outlook says disconnected.
When running the Exhchange Connectivity Analyzer, I get the following:
- Receive: Connection was successful but no banner was received.
- Send: Successfull. However when trying to send mail to external mailbox it does not reach that mailbox.
Mailflow was working perfectly at the time of the backup.
Help is much appreciated!
UPDATE 1: When telnet on local server i get SMTP banner. But not on other computers in same subnet.

OK. After fiddeling around in ADSIedit and trying to rebuild my Exchange environment I ended ut breaking it completely.
I then restored both my DC (Exchange schema CU2) and my EX (Exchange schema CU1). Scema Versions where the inconsistent as stated.
Then I uninstalled the KB2874216 successfully. After that i tried to Upgrade Exchange to CU2. The Upgrade failed at Mailbox Role: Mailbox Service With error Message:
The following error was generated when "$error.Clear();
          if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
            if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
              $sysMbx = $null;
              $name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
              $dispname = "Microsoft Exchange";
              $mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
              if ( $mbxs.length -eq 0)
                $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                if ($dbs.Length -ne 0)
                  $arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
                  if ($arbUsers.Length -ne 0)
                    $sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
              else
                if ($mbxs[0].DisplayName -ne $dispname )
                   set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
                $sysMbx = $mbxs[0];
              # Set the Organization Capabilities needed for this mailbox
              if ($sysMbx -ne $null)
                  Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
                  set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
                  # No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
                  # This can be remove after BUG(O15#2555914) is fixed.
                  if ($sysMbx.RetentionPolicy -eq $null )
                     $arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
                     set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
              else
                Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
            else
              write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
        " was run: "Database is mandatory on UserMailbox. Property Name: Database".
Seems the problem was corrupted arbitrary system mailboxes from previous Exchange 2010 to Exchange 2013 migration.
The solution for me was to restore the corrupted arbitrary mailboxes using this
LINK. It is for 2010 but Works on 2013.
I am now currently on Exchange CU2 on both my EX server and on my DC. Now I have to check mail flow and will report back.

Exchange Server 2013 failing Readiness Checks

Here are the list of errors it reports
Error:
Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
My user is in the Enterprise Admins group.
Error:
The local domain needs to be updated. You must be a member of the 'Domain Admins' group and 'Organization Management' role group, or 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.LocalDomainPrep.aspx
My user is in the Enterprise Admins group and it is also in the Organization Management Role
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
I am
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
I am
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
I am
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
I am
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
I am
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
I am
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
I am
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have been created but have not yet replicated to the local domain. Wait for replication to complete and then run setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
While this is showing up, I do have the Exchange objects availabe on all of my DCs in all of the sites.
Error:
The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
Its currently at 2008 Which is the highest I can make it in my organization at this time.
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
I'm able to communicate with all the DCs from the machine I'm attempting to install exchange on.
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Has anyone encounterd this?
I've run Setup /PrepareSchema and Setup /PrepareAD on the DC in the site Exchange specified.
I have installed all of the Prereqs
Here's an example of my set up
One Forest
AwesomeCompany.net -
There's Two sites
Atlanta-HeadQuarters
Atlanta-DataCenter
and Two Sub Domains
HeadQuarters
DataCenter
Exchange Machine is in Atlanta-DataCenter Site and attached to DataCenter domain.
Exchange requested the /PrepareAD and /PrepareSchema be run on a Domain Controller in the root domain that is in site Atlanta-HeadQuarters.
Any guidance would be appreciated.

Hello,
Just for double confirm, please run “WhoAmI” in CMDlet and see if you are using a local admin account.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange Server 2013: Installation fails

Migrating SBS 2008 to Windows Server 2012 R2 (no virtualization) and Exchange Server 2013 SP1
(1) ADprep on SBS 2008 went fine
(2) Installed necessary feature for Exchange (website “Part 1: Step-by-Step Exchange 2007 to 2013 Migration”)
A) the first time I installed Exchange 2013, the setup succeeded, however there were several ecp/WinRM errors.
B) restored Windows Server 2012 R2 to the state (2). Removed from AD (ADSI Edit)
… CN=Services; CN=Exchange; CN=First Organization; CN=Exchange Administrator Group; CN=Servers
delete new Win 2012 server
Run Exchange setup again:
The following error was generated when "$error.Clear();
if ($RoleStartTransportService)
start-SetupService -ServiceName MSExchangeTransport -MaxWaitTimeForRunningState 0:0:40
" was run: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
Checked:
- IPv6 is enabled, but was setup correctly after installing ADDS role)
- Administrators (Group) is a member of the Exch. Trusted Subsystem
Probably there is an AD problem, after the restoration (B) (bare metal) of the Win 2012 server.
Please help!
Fulco

Hi
the error states that the MSExchangeTransport service failed to start. Can you manually try starting the service and then run the setup again?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exchange Server 2013 SP1 Standard: Installation failing can't progress

I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of racket
do they think they're running?).
The error message:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
Yet, I see no PushNotifications virtual directory or anything remotely related to that on IIS or in the inetpub folders and files. If I try to resume the set-up after this error I get:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The AD configuration for virtual directory 'PushNotifications' already exists in 'CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local', please remove this AD configuration manually.
Parameter name: VirtualDirectoryName".
And I have to remove this config using ADSI Edit, which just returns me to the first error.

1. Prodution
2. Just 1 DC for 1 site.
3. Setup.EXE
4. Matches SP1 version numbers
5. That's just what was made available to me via MSPP, the installer doesn't see any updates?
6. Here is the log files:
[03/23/2015 22:06:52.0940] [1] Setup failed previously while performing the action Install. Looking for the failed task with ID ClientAccessComponent___75f8c93d15314369983d33ec0742e189.
[03/23/2015 22:06:52.0941] [1] 131 tasks were found to run.
[03/23/2015 22:06:52.0941] [1] Processing component 'Client Access Configuration' (Configuring Mailbox role: Client Access service.).
[03/23/2015 22:06:52.0941] [1] Executing:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
[03/23/2015 22:06:52.0955] [2] Active Directory session settings for 'New-PushNotificationsVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'SVR01.OFFICE.local', Preferred Global Catalog: 'SVR01.OFFICE.local', Preferred Domain Controllers: '{ SVR01.OFFICE.local }'
[03/23/2015 22:06:52.0956] [2] User specified parameters: -Role:'Mailbox' -DomainController:'SVR01.OFFICE.local'
[03/23/2015 22:06:52.0956] [2] Beginning processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:52.0999] [2] Searching objects "SVR02.OFFICE.local" of type "Server" under the root "$null".
[03/23/2015 22:06:53.0066] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:53.0068] [2] Processing object "SVR02\PushNotifications".
[03/23/2015 22:06:56.0763] [2] The properties changed on the object '' (CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local) are: "{ MetabasePath[msExchMetabasePath]='IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications', AuthenticationMethodFlags[msExchInternalAuthenticationMethods]='Ntlm, WindowsIntegrated', AuthenticationMethodFlags[msExchExternalAuthenticationMethods]='Ntlm, WindowsIntegrated', Id[distinguishedName]='SVR02\PushNotifications (Exchange Back End)', InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, OrganizationId[msExchOURoot, msExchCU]='' }".
[03/23/2015 22:06:56.0764] [2] Saving object "SVR02\PushNotifications (Exchange Back End)" of type "ADPushNotificationsVirtualDirectory" and state "New".
[03/23/2015 22:06:57.0073] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:57.0587] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:57.0591] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0378] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0378] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0386] [2] Ending processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:58.0388] [1] The following 1 error(s) occurred during task execution:
[03/23/2015 22:06:58.0388] [1] 0. ErrorRecord: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] 0. ErrorRecord: System.InvalidOperationException: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it. ---> System.Runtime.InteropServices.COMException: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
at Microsoft.Web.Administration.Interop.IAppHostAdminManager.GetAdminSection(String bstrSectionName, String bstrPath)
at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, String moduleName, String moduleType, ExchangeVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetLiveIdBasicAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, ADExchangeServiceVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServiceVirtualDirectory`1.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewPushNotificationsVirtualDirectory.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[03/23/2015 22:06:58.0389] [1] [ERROR] The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
[03/23/2015 22:06:58.0389] [1] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0390] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___75f8c93d15314369983d33ec0742e189 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03/23/2015 22:06:58.0390] [1] Setup is stopping now because of one or more critical errors.
[03/23/2015 22:06:58.0390] [1] Finished executing component tasks.
[03/23/2015 22:06:58.0406] [1] Ending processing Install-ClientAccessRole
It says it can not log on with the supplied details, but the account is an Administrator account with full privileges so I can't see why this would be the case.

Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1

Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1
When I manual start MSExchangepop3 Service on CAS It show "The Microsoft Exchange POP3 Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
In event log show POP3 EventID 1018 , 1019 , 1036
It said like this blinding already use (0.0.0.0)
The point is "IF I SET BINDING FOR 995 , MSEXCHANGE POP3 Service will automatic stop"
Does anyone face this issue please?
Thank you

You could check what (if anything) else is running on that port.
From a command prompt, type netstat -ano | find 995
This will give you the Process Identifier (PID) for the process that is running on port 995. Then you can open Task Manager, add PID as an additional column, and find out what that process is.
Hope that helps.

Issues trying to recover failed Exchange Server 2013 in a DAG

Having several issues attempting to recover a failed Exchange Server 2013. To start out, the failed server was mounted on a virtual server using hyper-v. The virtual server failed due to some hard drive partition issues and would no longer boot. As there
really was no purpose to having Exchange on a Virtual Server I decided to rename the host to the same name as the virtual server. I reset the name in AD and proceeded to rename the server. Then made sure all the necessary things were installed and proceeded
to do a recovery installation. I neglected to properly delete the old databases belonging to that server. I simply deleted the files off the hard drive instead of doing it properly. I should mention this is a two node plus witness server installation.Now,
it seems I cannot delete the former server in either ECP or command line. I have attempted to clean up the mess with the old databases but there is one that was mounted only on the failed server that I cannot remove. It seems until I can remove that, I cannot
remove the failed server from the DAG and do a recovery install. The steps shown in the tech net articles to remove a failed database have also failed. At this point I am wondering if I should just give up on the server name and do an install on a new server
name or if someone can give me some information on how to clean up the mess, that would be better I am sure. Here is a list of the things I have tried.
https://technet.microsoft.com/en-us/library/dd876880(v=exchg.150).aspx and in this article, the item mentioned is not in ADSIedit.
http://exchangeserverpro.com/unable-remove-failed-server-dag-exchange-server-2010/
http://exchangeserverpro.com/exchange-2013-how-to-remove-dag-member/ This
article describes one of the problems I am having but the solution is not there.
Thanks to any and all who can offer advice.
Ronald C. Pope

Thank you for your answer. Running that command results in the following:
[PS] C:\Windows\system32>Remove-MailboxDatabase "Mailbox Database 0939719168"
This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, public folder mailboxes or
arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox -Database"Mailbox Database 0939719168". To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of
archive mailboxes in this database, run the command Get-Mailbox -Database "Mailbox Database 0939719168" -Archive. To get a list of all
public folder mailboxes in this database, run the command Get-Mailbox -Database "Mailbox Database 0939719168" -PublicFolder. To get a
list of all arbitration mailboxes in this database, run the command Get-Mailbox -Database "Mailbox Database 0939719168" -Arbitration.
To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox
<Mailbox ID>. To disable an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox
<Mailbox ID> -Archive. To disable a public folder mailbox so that you can delete the mailbox database, run the command
Disable-Mailbox <Mailbox ID> -PublicFolder. Arbitration mailboxes should be moved to another server; to do this, run
the command New-MoveRequest <parameters>. If this is the last server in the organization, run the command
Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox.
Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan <MailboxPlan ID>
-Database "Mailbox Database 0939719168".
    + CategoryInfo          : InvalidOperation: (Mailbox Database 0939719168:DatabaseIdParameter) [Remove-MailboxDatab
   ase], AssociatedUserMailboxExistException
    + FullyQualifiedErrorId : [Server=EX01,RequestId=69b60793-fc4f-4dac-beb9-8c9afe381a36,TimeStamp=1/26/2015 6:28:34
   PM] 2BA41E0C,Microsoft.Exchange.Management.SystemConfigurationTasks.RemoveMailboxDatabase
    + PSComputerName        : ex01.<domain>com
I was able to disable the one mailbox that was listed for the database. I got the following error when attempting the command Get-Mailbox -Database"Mailbox Database 0939719168"
[PS] C:\Windows\system32>Get-MailboxPlan Database "Mailbox Database 0939719168"
Get-MailboxPlan : The term 'Get-MailboxPlan' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
At line:1 char:1
+ Get-MailboxPlan Database "Mailbox Database 0939719168"
+ ~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Get-MailboxPlan:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
the public folder and archive switch simply return a command prompt leading me to believe that there are no public or archive boxes on that database.
Ron

Upgrade Exchange Server 2013 SP1

Hello,
I have two Exchange 2013 SP1 servers with DAG configured. I want to upgrade them with CU8. Kindly advise how to do or is there any step by step document available for upgrading the DAG member server.
Thanks in advance.

yes you need to upgrade one at a time and putting them in maintenance mode
this article has step by step info
http://vanhybrid.com/2013/11/28/script-putting-exchange-server-2013-into-maintenance-mode/
Where Technology Meets Talent

Exchange server 2013 upgrade

Hi Guys,
My current version is "Microsoft Exchange Server 2013 RTM" and I would like to upgrade it to CU1. But I could
see that this is a major upgrade and it would cause some AD permission changes and schema update. I also have an RD server and also a SharePoint server connected to the same AD. So, I'm a bit hesitant to do the upgrade an I fear that the permission changes
would cause access problems to the users in RD server and SharePoint server.
Could someone shed some light on this? Also, would there be any issues with this CU1 update? Could someone share the steps to perform this upgrade? The Mailserver and ClientAccess roles are configured on the same machine.

Hi Nash Burns,
According to the Exchange Team Blog (http://blogs.technet.com/b/exchange/archive/2013/04/02/released-exchange-server-2013-rtm-cumulative-update-1.aspx),
CU1 grants Exchange Servers to make changes on msExchActiveSyncDevices class on
inetOrgPerson objects.
Another change in CU1 is about Monitoring Mailboxes.
Before CU1, Monitoring Mailbox are created in default "<domain root>/Users" container. With CU1, Monitoring Mailboxes will be created in the "Exchange System Objects/Monitoring Mailboxes" container.
In my organization, CU1 update didn't change any permissions on my RDS servers.
One question : why don't you apply directely SP1?

Exchange Server 2013 CU7 Upgrade Failed

Similar Messages

Maybe you are looking for