Exchange Server 2013 - Error: "A connection could not be completed within 15 secon

Hi All,
Our Environment consists of a single DAG. The dag copy went to failed and suspended state. I was unable to resume it.
When I try to reseed it I get the following Error. 
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: A timeout occurred while communicating with server 'server name" A connection could not be completed within 15 seconds.
Please help me to resolve this.
Thanks,
Vivek 

Hi,
To narrow down the issue, I recommend you use the Test-ReplicationHealth cmdlet to test the health of replication for this affected Mailbox server in DAG. For more details about this command, you can refer to the following article.
Test-ReplicationHealth
http://technet.microsoft.com/en-us/library/bb691314(v=exchg.141).aspx
And please use the Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about this mailbox database copy.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

  • Exchange 2013 SP1 - Error: Your request could not be completed

    When trying to log into the ECP I get an:
    Error
    Your request could not be completed.  Please try again later.   
    When I check the event viewer I get:
    WebHost failed to process a request.
     Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/6837052
     Exception: System.ServiceModel.ServiceActivationException: The service '/ecp/DDI/DDIService.svc' cannot be activated due to an exception during compilation.  The exception message is: This collection already contains an address with scheme http.
     There can be at most one address per scheme in this collection. If your service is being hosted in IIS you can fix the problem by setting 'system.serviceModel/serviceHostingEnvironment/multipleSiteBindingsEnabled' to true or specifying 'system.serviceModel/serviceHostingEnvironment/baseAddressPrefixFilters'.
    Parameter name: item. ---> System.ArgumentException: This collection already contains an address with scheme http.  There can be at most one address per scheme in this collection. If your service is being hosted in IIS you can fix the problem by
    setting 'system.serviceModel/serviceHostingEnvironment/multipleSiteBindingsEnabled' to true or specifying 'system.serviceModel/serviceHostingEnvironment/baseAddressPrefixFilters'.
    Parameter name: item
       at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item)
       at System.Collections.Generic.SynchronizedCollection`1.Add(T item)
       at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses)
       at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses)
       at Microsoft.Exchange.Management.ControlPanel.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses)
       at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity)
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
       --- End of inner exception stack trace ---
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
       at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
     Process Name: w3wp
     Process ID: 11124
    I am trying to create a Send connector and it gets all the way through but then fails at Select Source Server.   There are no source servers listed.   Why does it not pick up itself?    
    As for the error I think this is related to IIS permissions somehow and here is how i have the bindings set:
    Default Web Site:
    http   80  *
    net.msmq   localhost
    msmq.formatname localhost
    net.tcp 808:*
    net.pile )
    https exssrv.cas.local
    443 *    (With the SSL cert being the Microsoft Exchange built in one)
    Exchange Back End 
     http exssrv.cas.local
    81 192.168.1.5
    http exssrv
    80 *
    net.pipe *
    https  exssrv.cas.local 444
    192.168.1.5  (Bound to Microsoft Exchange ssl)
    I am connecting to the site internally from https://exssrv.cas.local/ecp
    Thanks for any suggestions.. I think I am almost there on the install!   Hoping!

    Hi ,
    Thank you for your question.
    This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
    Default Web Site:
    Exchange Back End:
    Then IIS must be restarted.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim

  • Error Message : Object could not be scheduled within the specified time interval

    Post Author: mohamed elkashef
    CA Forum: Publishing
    Dear All when i try to run event for daily reports it sometimes take generation status failed with this error  message : Object could not be scheduled within the specified time interval so  i need to know the reason of failure and how can i fix  this error  thanks a lot 

    Post Author: nvnaresh
    CA Forum: Publishing
    Dear jsanzone,
    I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
    We are using BO XIR2+SP2.
    I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
    We have 3 such reports to be scheduled on the same event.
    Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
    This usually should work fine.
    But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
    Do I need to increase any server parameters?
    Why is this happening randomly?  

  • Error: Your request could not be completed because a failure occurred while the report was being processed.

    Post Author: sagimann
    CA Forum: Deployment
    Hello,
    I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
    My env is:
    Solaris 10 64 bit
    Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
    BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
    Important bouser env:
    ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
    TNS_ADMIN=$ORACLE_HOME/network/admin
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
    I reboot the box, then start BO like so:
    cd /opt/reporting/bobje
    . setup/env.sh
    ./mysqlstartup.sh
    ./startservers
    ./tomcatstartup
    Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
    Error:
    Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
    This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
    May  5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
    pls advise,
    thank you.

    The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
    The explanation, from a comment in the above linked blog post:
    "To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
    Edited by: abirdman on Feb 3, 2012 9:49 PM

  • App Catalog ERROR "The action could not be completed. Try again later" Yellow exclamation mark

    Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
    I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
    I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
    So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log 
    with Description to [email protected]
    Reference number for chat: Chat session ID number 89786521
    Do you have any solution?
    Best regards
    Rufat Jalilov
    Post relates to: Pre 2 p102una (Unlocked NA)

    Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
    I really appreciate the attention rendered by the support services, I just need that everything works fine.
    I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
    I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
    So, I will wait for a few days, will see what's happening.
    Best regards
    Rufat Jalilov

  • Error submitting tasks: Operation could not be completed within the specified time

    I've created a Batch Application and I'm having an issue running a job.  Its suppose to synchronize 2 azure blob containers.
    In my JobSplitter, I compare 2 azure blob containers and find the files in the first container that need to be copied over to the second one.  Just figuring out which files to copy over can take about 5 to 6 minutes the first time this is run depending
    on the number of files that need to get copied over.
    Once we have the files that need to be copied, we group them into sets and create a task for each set.
    The exe that the TaskProcessor runs doesn't do anything just yet. All it does is write the arguments sent to it into a file. Nothing major.
    On the last run, about 900 tasks were created. Four of the tasks completed successfully. I can download the output files for them just fine. The next 4 tasks failed with an error.
    Looking in the JobLogs, I see this:
    The job orchestrator finished
    Failed to process job ac8dd4a3-d882-4ec1-847d-48844fa3e1f4: Error submitting tasks: Operation could not be completed
    within the specified time. RequestId:27eab612-c8ce-4e4b-8dfb-00e7024c71ec Time:2015-01-29T00:37:03.5943898Z
    Has anyone seen this before?
    Thanks,
    matt

    This error is usually a transient error, typically related to an internal storage timeout.  We're working on a fix for it.
    In the meantime, if you go into the Batch Apps portal, select the failed job and click Reprocess in the command bar, Batch Apps should re-run the failed tasks and the not-run tasks.  (Note that the tasks that already succeeded will not be re-run, and
    we will not re-run the job splitter to create new tasks.)
    Please let us know if you continue to see this problem or if reprocessing the job doesn't work for you.

  • Error : "Your purchase could not be complete" when gift app :(

    Hello , can you fix this problem for my account . I'm gifting app for my friends but i can't complete . It show me error : "Your purchase could not be complete" .Thank for your support

    Contact iTunes support at the link below.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • HT203433 APP store error " your purchase could not be completed"

    I'm receiving an error " your purchase could not be completed"any asks that I contact support at itunes...( at www.apple.com/support/itunes/ww/. ) this is happening on my laptop on itunes and on my iphone(app and itunes app). Free apps download fine but fee apps get this error. I check my credit card info associated with my itunes account and it looked fine but deleted it and re-entered it. any help?

    If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • File Save for Web = Error: The operation could not be completed.

    Installed photoshop CS6 trial Version 13.0 on Windows 7 Ultimate running in hyper-v virtual machine.  Created a small image and clicked File Save for Web.  This produced the error dialog "Error: The operation could not be completed."
    I tried the following trouble shooting steps:
    1. deleted the preferences
    2. created a new user
    3. re-installed both the operating system and photoshop
    4. looked for permission issues
    5. monitored procmon.exe to look for unusual errors
    I'm not sure what I'm looking for, but it simply does not work.

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • Continue to get error message "backup could not be completed" after purchasing additional storage

    continue to get error message "backup could not be completed" after purchasing additional storage

    Just wanted to update the community on my exciting adventure to fix my ipad;
    I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out!  They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
    Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA

  • Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

    In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

    What version of FCPX ?

  • Hi there, i purchased an app called Top Movies. But when using it on my iPhone to buy movies, it gives me the error 'Your request could not be completed'. Please help.

    Hi there, i purchased an app called Top Movies. But when using it on my iPhone to buy movies, it gives me the error 'Your request could not be completed'. Please help.

    Ok.. I see the app now in iTunes.
    Best thing to do is email the developer of that app.
    You can do that here >  http://www.lymobilesoft.com/contact.html
    Make sure and tell them exactly what the error says: 
    it gives me the error 'Your request could not be completed'.
    Instead of using a third party app, you can download movies directly from the iTunes store.

  • Save for web: Error: The Operation could not be completed

    On Windows 7, under virtualbox on a linux host. All of the other discussions on this question relate to OS X.
    I have reinstalled photoshop, and tried deleting preferences.

    Save for web: Error: The Operation could not be completed
    not much information there or in your append
    supersoaker wrote:
    On Windows 7, under virtualbox on a linux host. All of the other discussions on this question relate to OS X.
    I have reinstalled photoshop, and tried deleting preferences.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM;
    Windows reliability history Photoshop crash reports etc....
    virtualbox on a linux host. does the virtual PC provide any useful information? There an error in your environment you need to find out what the error is.

  • Error:Your Purchase Could Not Be Completed

    I want to buy final cut x pro, last version,  but I got an error:Your Purchase Could Not Be Completed (There was an error in the App Store. Please try again later. (null)
    Additional info
    1. the PC has final cut pro 7.0.3 installed
    2. Im using  another apple Id
    pleaseeee heeelp,
    Final Cut Pro X, OS X Mavericks (10.9.5)

    That cryptic error message might mean that the payment information in your account is invalid. Check with your credit-card issuer to see whether a charge was denied. If not, please sign out of the App Store and sign back in. Try the purchase again.

  • Streaming error the operation could not be completed

    Dear All,
    Please Help me i Above Subject Iam using Airtel Digital Tv Application name is pocket tv firts time is install Application is working good after some days showing error streaming error the operation could not be completed please try again later please let me know what is issued and how can fix this problem.

    I've continued tests on different films, and tried my entire collection. I've found about two dozen that will play fine on the PC, but will not cooperate when streamed to either Apple TV or my iPad. I tried several more tests with the audio, and that turned out not to be a factor -- I could not replicate that on another test.
    I wonder if something in the header of these files is corrupted or a flag is set incorrectly or something along those lines, as the data appears to be fine -- it's just not "handshaking" with my streaming hardware and/or the Apple Home Sharing code that powers it.
    Is there any way for me to "scrub" these files and amend their headers, or get into the file and tinker with that info by hand?

Maybe you are looking for