Exchange Server 2013 Installation error

Hi Support,
I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>CD\
C:\>E:
E:\>cd pradeep\Ex Setup 2013
E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
erms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
    Prerequisite Analysis                                     FAILED
     A reboot from a previous installation is pending. Please restart the system
 and then rerun Setup.
     For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.RebootPending.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
E:\pradeep\EX Setup 2013>

Hi ,
Please have a look in to the error message 
  "A reboot from a previous installation is pending. Please restart the system
 and then rerun Setup."
Reboot the server and try again .
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

  • Exchange Server 2013 installation error at Step 10/15

    I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
    Windows Server 2012, have already install on it:
    AD CD
    DNS
    IIS
    Exchange 2013 Prerequisites for Win.Server 2012 like described here
    http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
    And the (winner) error message is:
    Exchange Server component Mailbox role: Client Access service failed.
    Error: Error:
    The following error was generated when "$error.Clear();
    Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
              if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
                Install-AuthCertificate -DomainController $RoleDomainController
            " was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
    I search online for a solution and I found many others with same problem but any solution yet. :(
    If anyone can help me I am able to dedicate him my next ode.
    Thank you,
    Adrian

    I am experiencing the same problem except that mine is definitely NOT a domain controller.  The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
    "...Could not grant Network Service access to the certificate"
    Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities.  Granting rights to the certificate during the Setup process is the root of the problem.
    Here is the complete error comment:
    The following error was generated when "$error.Clear();
              Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
              if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
                Install-AuthCertificate -DomainController $RoleDomainController
            " was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.".

  • Exchange server 2013 Installation issue

    Dear Experts,
    Thanks in advance...
    I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
    Dell Laptop Intel I5 1.7 GHZ
    RAM -8GB
    Vmware workstation 9.
    Steps I followed
    Created a VM inside Vmware and Installed windows 2012 Std. Edition
    Memory assigned to VM is 1 GB
    All prerequisites completed and tried to Install Exchange server 2013 SP1
    During installation it asked me to select the  role to Install and I selected Mailbox server role and CAS
    Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error  setup could not completed .
    Please find the logs for your reference.............
    04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
    [04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
    [04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
    [04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
    [04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
    [04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
    [04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
    [04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
    [04/13/2015 08:41:13.0567] [0] Starting file's copying...
    [04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
    [04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
    [04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
    [04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
    [04/13/2015 08:42:55.0484] [0] File's copying finished.
    [04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
    [04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
    [04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable. 
    See the Exchange setup log for more information on this error.
    [04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
    [04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
    [04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.'.
    [04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
    [04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
    [04/13/2015 08:43:32.0739] [0] The following roles are installed:
    [04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
    [04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
    [04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
    [04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
    [04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
    [04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0536] [0] Applying default role selection state
    [04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
    [04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
    [04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
    [04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
    [04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
    [04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
    [04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
    [04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
    [04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
    [04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
    [04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
    [04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
    [04/13/2015 08:46:30.0221] [0] Finished loading screen
    Regards
    Biswajeet

    Hi,
    Please find the DC Health check report.
    Microsoft Windows [Version 6.2.9200]
    (c) 2012 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = EX-13
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Connectivity
             ......................... EX-13 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Advertising
             ......................... EX-13 passed test Advertising
          Starting test: FrsEvent
             ......................... EX-13 passed test FrsEvent
          Starting test: DFSREvent
             ......................... EX-13 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... EX-13 passed test SysVolCheck
          Starting test: KccEvent
             ......................... EX-13 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... EX-13 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... EX-13 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... EX-13 passed test NCSecDesc
          Starting test: NetLogons
             ......................... EX-13 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... EX-13 passed test ObjectsReplicated
          Starting test: Replications
             ......................... EX-13 passed test Replications
          Starting test: RidManager
             ......................... EX-13 passed test RidManager
          Starting test: Services
             ......................... EX-13 passed test Services
          Starting test: SystemLog
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:37
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:49
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:02:02
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             ......................... EX-13 failed test SystemLog
          Starting test: VerifyReferences
             ......................... EX-13 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : NETMAGIC
          Starting test: CheckSDRefDom
             ......................... NETMAGIC passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... NETMAGIC passed test CrossRefValidation
       Running enterprise tests on : NETMAGIC.IN
          Starting test: LocatorCheck
             ......................... NETMAGIC.IN passed test LocatorCheck
          Starting test: Intersite
             ......................... NETMAGIC.IN passed test Intersite
    Regards
    Biswajeet

  • Exchange Server 2013 installer will not start or complete

    Hello,
    I am trying to MS Exchange Server onto a Windows Server 2012R2 with Active Directory network. I had started an installation process and it shot out a list of pre-requisites that server need before it can attempt to install. I fulfilled every pre-requisite.
    Rebooted the server. Now whenever I attempt another installation process again. It starts, gathers information, and quits with event log:
    Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 15.0.516.32. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
    MS Exchange Server is not listed in Programs and Features to even remove, is it a faulty Microsoft Installer? I have already rebooted numerous times to no avail.
    EDIT: Here's a copy of the MSI log, I couldn't find anything to indicate what's going wrong myself, http://pastebin.com/LwCAimuF

    Hi,
    I've downloaded (as per instructions above):
    Microsoft Exchange Server 2013 Service Pack 1 (SP1)
    http://www.microsoft.com/en-us/download/details.aspx?id=41994
    Again, the installer repeats the same behavior as before, right now I am running a repair tool on .Net repair tool.
    New log http://pastebin.com/SDynMaDe
    Edit: Looks like there's long list of issues trying to fulfill Exchange Pre Requisite.
    Windows Management Framework 4.0
    http://www.microsoft.com/en-us/download/details.aspx?id=40855
    "The certificate for the signer of the message is invalid or not found"
    It would probably be best to re-install Windows Server again

  • Exchange Server 2013: Installation fails

    Migrating SBS 2008 to Windows Server 2012 R2 (no virtualization) and Exchange Server 2013 SP1
    (1) ADprep on SBS 2008 went fine
    (2) Installed necessary feature for Exchange (website “Part 1: Step-by-Step Exchange 2007 to 2013 Migration”)
    A) the first time I installed Exchange 2013, the setup succeeded, however there were several ecp/WinRM errors.
    B) restored Windows Server 2012 R2 to the state (2). Removed from AD (ADSI Edit)
    … CN=Services; CN=Exchange; CN=First Organization; CN=Exchange Administrator Group; CN=Servers 
    delete new Win 2012 server
    Run Exchange setup again:
    The following error was generated when "$error.Clear();
    if ($RoleStartTransportService)
    start-SetupService -ServiceName MSExchangeTransport -MaxWaitTimeForRunningState 0:0:40
            " was run: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
    Checked:
    - IPv6 is enabled, but was setup correctly after installing ADDS role)
    - Administrators (Group) is a member of the Exch. Trusted Subsystem
    Probably there is an AD problem, after the restoration (B) (bare metal) of the Win 2012 server.
    Please help!
    Fulco

    Hi
    the error states that the MSExchangeTransport service failed to start. Can you manually try starting the service and then run the setup again?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Problem In Exchange Server 2013 Installation

    i am Trying to install exchange server for Lab Purpose and it start normal install ,and it stuck in step 8 of 15 at 98% and give error FMS Initialization
    So kindly Give me Proper solution,i have un install each and every things Like DC and agains do the same process but still give problem in 8 of 15 in 98% with FMS.i check on net too but not get a proper solution for its.
    regard Abdul Nasir Afridi

    I think
    Jean-Paul van Ravensberg describes exactly this problem and the solution for it.
    First, uninstall Exchange (from "Programs and Features" in Control Panel). Then, restart and repeat the Exchange 2013 installation without the the malware protection - by default, it is set to be installed, and you need to choose "Yes":

  • Exchange Server 2013 - SChannel errors KB2992611

    Hi,
    At a customer we have Exchange 2013 setup on a Windows Server 2012 R2 virtual machine.
    Last weekend we installed the latest patches and since then we are experiencing some errors regarding TLS. The System Eventlog is full of events from SChannel with ID 36887 saying: "A fatal alert received from the remote endpoint. The TLS Protocol defined
    fatal alert code is 40." 
    When I search the internet I immediately found this topic: http://support2.microsoft.com/kb/2992611/en-us stating it had something to do with KB2992611 being installed.
    This stated that I should download the update KB3018238. But I can't seem to download this KB for Windows Server 2012 R2. I searched the internet, the Microsoft Update Catalog, etc.
    Any ideas on where I could find this KB for 2012 R2?
    Many thanks in advance!
    Best regards,
    Bert

    Hi,
    Depending on my research, KB3018238 is for Windows Server 2008 R2 and Windows Server 2012. KB2992611 only add the new cipher suites to Windows Server 2008 R2 and Windows Server 2012. KB3018238 is used to remove the new cipher.
    For your question, I want to double confirm whether client failed connect to Exchange server with error. Please post relevant error, it’s more helpful for further troubleshooting.
    Please check if the cipher suits used by the server and client are matched. Besides, There have a few Schannel updates in the last couple months, for example KB3011780. We can install it in Windows Server 2012 R2 for test.
    Thanks,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Lync Server 2013 Installation Error

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Is the Lync deployment in Azure as well? If so please check this
    blog by Guy Bachar. Look for "Houston, we have a problem" 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Lync Sorted blog

  • Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

    Hello,
    I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's.  I have worked every error resolution I can find, but I can't get past this error.
    Error:
    The following error was generated when "$error.Clear();
    install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
    " was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
    Any assistance is appreciated.

    Are you running the installation from an ISO-file?
    If so, then copy the files (preferably
    Exchange 2013 w. SP1) to the local disk
    and run the install with elevated privileges.
    Martina Miskovic

  • Exchange Server 2013: Installation failed while installing Mailbox role.

    Hi,
    Mailbox role installation failed. I tried to remove and reinstall so many times but it still fails. (but the uninstall is complete)
    Below is log from the lastest installation. Could you please help to veify the problem.
    Error:
    The following error was generated when "$error.Clear();
    if ($RoleIsDatacenter -ne $true)
    if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
    $sysMbx = $null;
    $name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
    $dispName = "Microsoft Exchange";
    Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
    $mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
    if ($mbxs.Length -eq 0)
    Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
    $dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
          if ($dbs.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
    $arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
    if ($arbUsers.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
    $sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
    else
    if ($mbxs[0].DisplayName -ne $dispName )
    Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
    Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
    $sysMbx = $mbxs[0];
    # Set the Organization Capabilities needed for this mailbox
    if ($sysMbx -ne $null)
    # We need 1 GB for uploading large OAB files to the organization mailbox
    Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
    set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
    else
    Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
    else
    Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
    " was run: "Database is mandatory on UserMailbox.".
    Error:
    The following error was generated when "$error.Clear();
    if ($RoleIsDatacenter -ne $true)
    if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
    $sysMbx = $null;
    $name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
    $dispName = "Microsoft Exchange";
    Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
    $mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
    if ($mbxs.Length -eq 0)
                Write-ExchangeSetupLog
    -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
    $dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
    if ($dbs.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
    $arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
    if ($arbUsers.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
    $sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
    else
    if ($mbxs[0].DisplayName -ne $dispName )
    Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
    Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
    $sysMbx = $mbxs[0];
    # Set the Organization Capabilities needed for this mailbox
    if ($sysMbx -ne $null)
    # We need 1 GB for uploading large OAB files to the organization mailbox
    Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
    set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
    else
    Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
    else
    Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
    " was run: "Database is mandatory on UserMailbox. Property Name: Database".

    Hi,
    See if deleting the account SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} in ADUC (you should find it in the Users Container) and then rerun
    setup.exe /preparead helps you solve your problem.
    Martina Miskovic

  • Exchange server 2013 roles error

    Hello,
    After successfully installed Microsoft Exchange 2013 coexistence with Exchange 2007, I run into many problems. I am getting event ID 1023:Microsoft-Windows-Perflib: Windows cannot load the extensible counter DLL MSExchangeIS. The first four bytes (DWORD)
    of the Data section contains the windows error code.
    Event ID 6003: MSExchange Common: ConnectitityLog: Failed to create log directory: Access is denied to path. What kind of access permission do I give to the file directory?
    Jimmy
    Jimmy

    Hello,
    For event id 1023, here is the article for your reference.
    Event ID 1023 -Performance Library Availability
    http://technet.microsoft.com/en-us/library/cc727009(v=ws.10).aspx
    If the event persists, I suggest you post the event id to windows server forum.
    http://social.technet.microsoft.com/Forums/en-US/winserver8gen/threads
    For event id 6003, please make sure that the path of the log directory does not contain any directory with read-only permissions.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Exchange Server 2010 Installation Error

    I am installing Exchange 2010 on a fresh Windows 2008 Server, and done with all the Prerequisites. but still i am getting this error...
    I have Added These commands also to powershell.
    Import-Module ServerManager
    Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
    Still m not able to instal.
    HELP:
    mohit

    Hello,
    Please follow the Willard's suggestion.
    Besides, please use dcdiag command-line tool to check if DC server run normally.
    Please use telnet command-line tool to check 389 /3268 is opened on firewall.
    Please restart Microsoft Exchange Active Directory Topology Service to check the result.
    Cara Chen
    TechNet Community Support

  • Need information about Exchange server 2013 CU5

    Hello,
    Can anyone implemented Exchange Server 2013 CU5. I need feedback about this patch. Basically i will going to deploy this patch after getting best feedback.
    I'm waiting for your feedback.
    Thanks,
    Parvez

    Hello,
    Since the Exchange Server 2013 CU5 just be released, there is no detailed technet article or exchange team blog to verify some issues during installation. But I see a MCC who update a member in a DAG, there is no problem. If there are some issues, you
    can check the setup logs or event logs.
    Based on my known, if your environment meets exchange server 2013 prerequisites, and you follow the exchange server 2013 installation process, there should be problem.
    I recommend you deploy the patch on test environment firstly, and then apply it on production environment.
    Cara Chen
    TechNet Community Support

  • Installation error for Exchange Server-2013

    I am trying to install exchange server-2013 on my Windows server-2012
    machine. I have configured per-requisite applications and develop the server environment with active directory roles.
    At my readiness check option, it shows the following error:-
    "An unsupported operating system was detected . Exchange server-2013 client access and mailbox server roles support windows server -2008R2 SP1 or later  and windows server-2012".
    I am not using any V-machine or option. So how do i resolve the issue to install the Exchange server-2013? Please help me.
    Regard
    Azad 
    Azadur Sarker 6, Seaford street Stoke-on-Trent, ST4 2EU

    Hi I found after promoting the exchange server as a Domain controller re-installing AD prep and running extending Schema completed successfully , I'm now able to get rid of exchange cmdlet logs event id and can successfully see and connect through  the
    exchange 2013  management shell  
    "Get-Exchangeserver" 
    However still not able to connect to https://localhost/eac and when i re-run setup 
    01-28-2014 21:10:16.0804] [0] Starting Microsoft Exchange Server 2013 Setup
    [01-28-2014 21:10:16.0804] [0] **********************************************
    [01-28-2014 21:10:16.0804] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
    [01-28-2014 21:10:16.0804] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [01-28-2014 21:10:16.0804] [0] Setup version: 15.0.516.32.
    [01-28-2014 21:10:16.0804] [0] Logged on user: TESTLAB\Administrator.
    [01-28-2014 21:10:16.0867] [0] Command Line Parameter Name='sourcedir', Value='D:\'.
    [01-28-2014 21:10:16.0867] [0] Command Line Parameter Name='mode', Value='Install'.
    [01-28-2014 21:10:16.0882] [0] RuntimeAssembly was started with the following command: '/sourcedir:D: /mode:Install'.
    [01-28-2014 21:10:17.0085] [0] The following roles are installed: BridgeheadRole AdminToolsRole 
    [01-28-2014 21:10:17.0726] [0] Setup is choosing the domain controller to use
    [01-28-2014 21:10:17.0820] [0] The MSExchangeADTopology has a persisted domain controller: Exch2013.Testlab.labyyz.testnet.rim.net
    [01-28-2014 21:10:18.0023] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use Exch2013.Testlab.labyyz.testnet.rim.net
    [01-28-2014 21:10:18.0023] [0] Setup is choosing a global catalog...
    [01-28-2014 21:10:18.0023] [0] Setup has chosen the global catalog server Exch2013.Testlab.labyyz.testnet.rim.net.
    [01-28-2014 21:10:18.0023] [0] Setup will use the domain controller 'Exch2013.Testlab.labyyz.testnet.rim.net'.
    [01-28-2014 21:10:18.0023] [0] Setup will use the global catalog 'Exch2013.Testlab.labyyz.testnet.rim.net'.
    [01-28-2014 21:10:18.0023] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
    [01-28-2014 21:10:18.0038] [0] Exchange organization container for the organization is 'CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
    [01-28-2014 21:10:18.0054] [0] Setup will search for an Exchange Server object for the local machine with name 'EXCH2013'.
    [01-28-2014 21:10:18.0210] [0] Exchange Server object found : 'CN=EXCH2013,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
    [01-28-2014 21:10:18.0210] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole 
    [01-28-2014 21:10:18.0210] [0] The following datacenter roles are unpacked: 
    [01-28-2014 21:10:18.0210] [0] The following roles are installed: BridgeheadRole AdminToolsRole 
    [01-28-2014 21:10:18.0210] [0] The local server has some Exchange files installed.
    [01-28-2014 21:10:18.0226] [0] Server Name=EXCH2013
    [01-28-2014 21:10:18.0242] [0] Setup will use the path 'D:\' for installing Exchange.
    [01-28-2014 21:10:18.0257] [0] Setup will discover the installed roles from server object 'CN=EXCH2013,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
    [01-28-2014 21:10:18.0257] [0] 'BridgeheadRole' is installed on the server object.
    [01-28-2014 21:10:18.0257] [0] The installation mode is set to: 'Install'.
    [01-28-2014 21:10:39.0632] [0] An Exchange organization with name 'TestLab' was found in this forest.
    [01-28-2014 21:10:39.0632] [0] Active Directory Initialization status : 'True'.
    [01-28-2014 21:10:39.0632] [0] Schema Update Required Status : 'False'.
    [01-28-2014 21:10:39.0632] [0] Organization Configuration Update Required Status : 'False'.
    [01-28-2014 21:10:39.0632] [0] Domain Configuration Update Required Status : 'False'.
    [01-28-2014 21:10:39.0632] [0] The locally installed version is 15.0.516.32.
    [01-28-2014 21:10:39.0632] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
    [01-28-2014 21:10:39.0664] [0] Applying default role selection state
    [01-28-2014 21:10:39.0710] [0] Setup is determining what organization-level operations to perform.
    [01-28-2014 21:10:39.0710] [0] Because the value was specified, setup is setting the argument OrganizationName to the value TestLab.
    [01-28-2014 21:10:39.0710] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
    [01-28-2014 21:10:39.0710] [0] InstallModeDataHandler has 0 DataHandlers
    [01-28-2014 21:10:39.0710] [0] RootDataHandler has 1 DataHandlers
    [01-28-2014 21:10:40.0273] [0] Finished loading screen IncompleteInstallationDetectedPage.
    [01-28-2014 21:11:08.0117] [0] Setup is determining what organization-level operations to perform.
    [01-28-2014 21:11:08.0117] [0] Because the value was specified, setup is setting the argument OrganizationName to the value TestLab.
    [01-28-2014 21:11:08.0117] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
    [01-28-2014 21:11:08.0117] [0] InstallModeDataHandler has 0 DataHandlers
    [01-28-2014 21:11:08.0117] [0] RootDataHandler has 1 DataHandlers
    [01-28-2014 21:11:08.0335] [0] Finished loading screen SetupProgressPage.
    [01-28-2014 21:15:30.0513] [0] End of Setup
    [01-28-2014 21:15:30.0513] [0] **********************************************

  • Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2

    Hi Team,
    Need urgent help in resolution of following error:
    Environment Details: VMware ESXi 5.5 (vMotion)
    Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
    Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
    OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
    Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
    Prerequisites: Installed
    Error: Installation gives Error at Step 10 during installation of Mailbox Service
    Error Details Below:
    Error:
    The following error was generated when "$error.Clear();
    if ([Environment]::OSVersion.Version.Major -ge 6)
    $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
    $reg= join-path (join-path $env:SystemRoot system32) reg.exe;
    $servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
    if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
    if ((get-service wsbexchange).Status -eq "Running")
    Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
    Exchange /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
    Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
    Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
    Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
    " was run: "Process execution failed with exit code 1.".

    Resolved ! :)
    Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
    As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
    Thanks to all.

Maybe you are looking for

  • Itunes cant play music because of my "audio configuration"

    im confused...this has happened to me b4 but i dont remember what i did. as soon as i open up itunes a window comes up and it says "Itunes has detected a problem with your audio configuration,Audio/video playback may not operate properly" what do i d

  • Information message in infoset query.

    hi all, i have added a field into the infoset query adn im using s_pho_48000513 . my probelm is when ever im opennig the query im getting information message as some selection fields are not available.does any have idea why im getting this message ..

  • Be able to choose only some customer to create a sales order

    Hi experts, Iu2019ve been checking this thread bellow, so that I can solve my trouble, but  Iu2019m still trying to find out if this method can help me solve an issue, BADI CRM_ORDER_AUTH_CHECK When a salesman is going to create a sale order he shoul

  • Read or Receipt Confirmation

    Please help; I don't know how or where to find in Mail...the feature for; "read" mail or "confirmation of receipt" as in Windows Outllook Can I do the same in Mail?

  • Adobe acrobat 11 pro monthly subscription, keep getting license software window

    I am a single subscriber to acrobat 11 pro, every time I open a PDF I get a prompt to license the software, why? windows 7