Exchange Server 2013: Installation fails
Migrating SBS 2008 to Windows Server 2012 R2 (no virtualization) and Exchange Server 2013 SP1
(1) ADprep on SBS 2008 went fine
(2) Installed necessary feature for Exchange (website “Part 1: Step-by-Step Exchange 2007 to 2013 Migration”)
A) the first time I installed Exchange 2013, the setup succeeded, however there were several ecp/WinRM errors.
B) restored Windows Server 2012 R2 to the state (2). Removed from AD (ADSI Edit)
… CN=Services; CN=Exchange; CN=First Organization; CN=Exchange Administrator Group; CN=Servers
delete new Win 2012 server
Run Exchange setup again:
The following error was generated when "$error.Clear();
if ($RoleStartTransportService)
start-SetupService -ServiceName MSExchangeTransport -MaxWaitTimeForRunningState 0:0:40
" was run: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
Checked:
- IPv6 is enabled, but was setup correctly after installing ADDS role)
- Administrators (Group) is a member of the Exch. Trusted Subsystem
Probably there is an AD problem, after the restoration (B) (bare metal) of the Win 2012 server.
Please help!
Fulco
Hi
the error states that the MSExchangeTransport service failed to start. Can you manually try starting the service and then run the setup again?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
Exchange Server 2013: Installation failed while installing Mailbox role.
Hi,
Mailbox role installation failed. I tried to remove and reinstall so many times but it still fails. (but the uninstall is complete)
Below is log from the lastest installation. Could you please help to veify the problem.
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog
-Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".Hi,
See if deleting the account SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} in ADUC (you should find it in the Users Container) and then rerun
setup.exe /preparead helps you solve your problem.
Martina Miskovic -
Exchange server 2013 Installation issue
Dear Experts,
Thanks in advance...
I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
Dell Laptop Intel I5 1.7 GHZ
RAM -8GB
Vmware workstation 9.
Steps I followed
Created a VM inside Vmware and Installed windows 2012 Std. Edition
Memory assigned to VM is 1 GB
All prerequisites completed and tried to Install Exchange server 2013 SP1
During installation it asked me to select the role to Install and I selected Mailbox server role and CAS
Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error setup could not completed .
Please find the logs for your reference.............
04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
[04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
[04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
[04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
[04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
[04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
[04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
[04/13/2015 08:41:13.0567] [0] Starting file's copying...
[04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
[04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
[04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
[04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
[04/13/2015 08:42:55.0484] [0] File's copying finished.
[04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
[04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
[04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
See the Exchange setup log for more information on this error.
[04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
[04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
[04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.'.
[04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
[04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
[04/13/2015 08:43:32.0739] [0] The following roles are installed:
[04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
[04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
[04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
[04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
[04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
[04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
[04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0536] [0] Applying default role selection state
[04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
[04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
[04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
[04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
[04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
[04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
[04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
[04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
[04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
[04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
[04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
[04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
[04/13/2015 08:46:30.0221] [0] Finished loading screen
Regards
BiswajeetHi,
Please find the DC Health check report.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = EX-13
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\EX-13
Starting test: Connectivity
......................... EX-13 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\EX-13
Starting test: Advertising
......................... EX-13 passed test Advertising
Starting test: FrsEvent
......................... EX-13 passed test FrsEvent
Starting test: DFSREvent
......................... EX-13 passed test DFSREvent
Starting test: SysVolCheck
......................... EX-13 passed test SysVolCheck
Starting test: KccEvent
......................... EX-13 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... EX-13 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... EX-13 passed test MachineAccount
Starting test: NCSecDesc
......................... EX-13 passed test NCSecDesc
Starting test: NetLogons
......................... EX-13 passed test NetLogons
Starting test: ObjectsReplicated
......................... EX-13 passed test ObjectsReplicated
Starting test: Replications
......................... EX-13 passed test Replications
Starting test: RidManager
......................... EX-13 passed test RidManager
Starting test: Services
......................... EX-13 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000272C
Time Generated: 04/14/2015 18:01:37
Event String:
DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
ing any of the configured protocols; requested by PID 4e4 (C:\Windows\syste
m32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 04/14/2015 18:01:49
Event String:
DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
ing any of the configured protocols; requested by PID 4e4 (C:\Windows\syste
m32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 04/14/2015 18:02:02
Event String:
DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
ing any of the configured protocols; requested by PID 4e4 (C:\Windows\syste
m32\dcdiag.exe).
......................... EX-13 failed test SystemLog
Starting test: VerifyReferences
......................... EX-13 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : NETMAGIC
Starting test: CheckSDRefDom
......................... NETMAGIC passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... NETMAGIC passed test CrossRefValidation
Running enterprise tests on : NETMAGIC.IN
Starting test: LocatorCheck
......................... NETMAGIC.IN passed test LocatorCheck
Starting test: Intersite
......................... NETMAGIC.IN passed test Intersite
Regards
Biswajeet -
Exchange Server 2013 Installation error
Hi Support,
I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>CD\
C:\>E:
E:\>cd pradeep\Ex Setup 2013
E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
erms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis FAILED
A reboot from a previous installation is pending. Please restart the system
and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.RebootPending.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
E:\pradeep\EX Setup 2013>Hi ,
Please have a look in to the error message
"A reboot from a previous installation is pending. Please restart the system
and then rerun Setup."
Reboot the server and try again .
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Exchange Server 2013 installation error at Step 10/15
I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
Windows Server 2012, have already install on it:
AD CD
DNS
IIS
Exchange 2013 Prerequisites for Win.Server 2012 like described here
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
And the (winner) error message is:
Exchange Server component Mailbox role: Client Access service failed.
Error: Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
I search online for a solution and I found many others with same problem but any solution yet. :(
If anyone can help me I am able to dedicate him my next ode.
Thank you,
AdrianI am experiencing the same problem except that mine is definitely NOT a domain controller. The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
"...Could not grant Network Service access to the certificate"
Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities. Granting rights to the certificate during the Setup process is the root of the problem.
Here is the complete error comment:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.". -
Exchange Server 2013 installer will not start or complete
Hello,
I am trying to MS Exchange Server onto a Windows Server 2012R2 with Active Directory network. I had started an installation process and it shot out a list of pre-requisites that server need before it can attempt to install. I fulfilled every pre-requisite.
Rebooted the server. Now whenever I attempt another installation process again. It starts, gathers information, and quits with event log:
Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 15.0.516.32. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MS Exchange Server is not listed in Programs and Features to even remove, is it a faulty Microsoft Installer? I have already rebooted numerous times to no avail.
EDIT: Here's a copy of the MSI log, I couldn't find anything to indicate what's going wrong myself, http://pastebin.com/LwCAimuFHi,
I've downloaded (as per instructions above):
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Again, the installer repeats the same behavior as before, right now I am running a repair tool on .Net repair tool.
New log http://pastebin.com/SDynMaDe
Edit: Looks like there's long list of issues trying to fulfill Exchange Pre Requisite.
Windows Management Framework 4.0
http://www.microsoft.com/en-us/download/details.aspx?id=40855
"The certificate for the signer of the message is invalid or not found"
It would probably be best to re-install Windows Server again -
Problem In Exchange Server 2013 Installation
i am Trying to install exchange server for Lab Purpose and it start normal install ,and it stuck in step 8 of 15 at 98% and give error FMS Initialization
So kindly Give me Proper solution,i have un install each and every things Like DC and agains do the same process but still give problem in 8 of 15 in 98% with FMS.i check on net too but not get a proper solution for its.
regard Abdul Nasir AfridiI think
Jean-Paul van Ravensberg describes exactly this problem and the solution for it.
First, uninstall Exchange (from "Programs and Features" in Control Panel). Then, restart and repeat the Exchange 2013 installation without the the malware protection - by default, it is set to be installed, and you need to choose "Yes": -
Need information about Exchange server 2013 CU5
Hello,
Can anyone implemented Exchange Server 2013 CU5. I need feedback about this patch. Basically i will going to deploy this patch after getting best feedback.
I'm waiting for your feedback.
Thanks,
ParvezHello,
Since the Exchange Server 2013 CU5 just be released, there is no detailed technet article or exchange team blog to verify some issues during installation. But I see a MCC who update a member in a DAG, there is no problem. If there are some issues, you
can check the setup logs or event logs.
Based on my known, if your environment meets exchange server 2013 prerequisites, and you follow the exchange server 2013 installation process, there should be problem.
I recommend you deploy the patch on test environment firstly, and then apply it on production environment.
Cara Chen
TechNet Community Support -
Connecting to Exchange Server 2013 using IMAP command gives authenication error
Hello All,
My application (it is a C# code) connects to Microsoft exchange server 2013 using POP3 and IMAP, processes the emails, marks as read and move to particular folder if it is processed successfully else to an different folder. In this sometimes,
I am getting authentication failed error from IMAP however same mail is processed when it is executed next time. Few times it is processed with out error. I am not sure what is causing this issue.We are connecting to IMAP using tcpIMAP command.
This is the same application which we used with exchange server 2010 now we are upgrading to exchange server 2013. I have verified that the setting of exchange 2010 and 2013 are the same.
To verify the IMAP command I created a sample application using C# which will try to connect to IMAP service and log in to exchange server 2013; it fails to authenticate the user after connecting for few times and then it starts to authenticate
successfully then again fails for few times and then authenticates. I am not sure why this is happening.
Please suggest how can I resolve this.
Thank you, SanthaSince I've upgraded to Snow Leopard I've also moved from Entourage 2008 to Mail, iCal & Addressbook with the new Exchange support.
My company exchange server is Exchange 2007.
Mail works fine except the occasional Mail crash.
iCal worked fine the first two days and then it came with an error the it cannot connect to the Exchange server and asks me to type my email address again. Doesn't work so I need to put my exchange calendar in iCal in offline. But now there is no syncing with the Echange server.
This only occurs when I add a meeting request in iCal.
My Exchange administrator has reset my mailbox on the Exchange server.
This helped for about 4 hours. Now it's the same problem.
I have a feeling the when you setup your exchange account in Mail it uses different settings for Mail and iCal with the autoconfig.
Anybody has a solution? My Exchange admin cannot find any problems on his side. Do I need to make changes on my iCal client or do we need to wait for OS 10.6.1 ? -
Exchange Server 2013 SP1 Standard: Installation failing can't progress
I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of racket
do they think they're running?).
The error message:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
Yet, I see no PushNotifications virtual directory or anything remotely related to that on IIS or in the inetpub folders and files. If I try to resume the set-up after this error I get:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The AD configuration for virtual directory 'PushNotifications' already exists in 'CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local', please remove this AD configuration manually.
Parameter name: VirtualDirectoryName".
And I have to remove this config using ADSI Edit, which just returns me to the first error.1. Prodution
2. Just 1 DC for 1 site.
3. Setup.EXE
4. Matches SP1 version numbers
5. That's just what was made available to me via MSPP, the installer doesn't see any updates?
6. Here is the log files:
[03/23/2015 22:06:52.0940] [1] Setup failed previously while performing the action Install. Looking for the failed task with ID ClientAccessComponent___75f8c93d15314369983d33ec0742e189.
[03/23/2015 22:06:52.0941] [1] 131 tasks were found to run.
[03/23/2015 22:06:52.0941] [1] Processing component 'Client Access Configuration' (Configuring Mailbox role: Client Access service.).
[03/23/2015 22:06:52.0941] [1] Executing:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
[03/23/2015 22:06:52.0955] [2] Active Directory session settings for 'New-PushNotificationsVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'SVR01.OFFICE.local', Preferred Global Catalog: 'SVR01.OFFICE.local', Preferred Domain Controllers: '{ SVR01.OFFICE.local }'
[03/23/2015 22:06:52.0956] [2] User specified parameters: -Role:'Mailbox' -DomainController:'SVR01.OFFICE.local'
[03/23/2015 22:06:52.0956] [2] Beginning processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:52.0999] [2] Searching objects "SVR02.OFFICE.local" of type "Server" under the root "$null".
[03/23/2015 22:06:53.0066] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:53.0068] [2] Processing object "SVR02\PushNotifications".
[03/23/2015 22:06:56.0763] [2] The properties changed on the object '' (CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local) are: "{ MetabasePath[msExchMetabasePath]='IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications', AuthenticationMethodFlags[msExchInternalAuthenticationMethods]='Ntlm, WindowsIntegrated', AuthenticationMethodFlags[msExchExternalAuthenticationMethods]='Ntlm, WindowsIntegrated', Id[distinguishedName]='SVR02\PushNotifications (Exchange Back End)', InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, OrganizationId[msExchOURoot, msExchCU]='' }".
[03/23/2015 22:06:56.0764] [2] Saving object "SVR02\PushNotifications (Exchange Back End)" of type "ADPushNotificationsVirtualDirectory" and state "New".
[03/23/2015 22:06:57.0073] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:57.0587] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:57.0591] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0378] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0378] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0386] [2] Ending processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:58.0388] [1] The following 1 error(s) occurred during task execution:
[03/23/2015 22:06:58.0388] [1] 0. ErrorRecord: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] 0. ErrorRecord: System.InvalidOperationException: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it. ---> System.Runtime.InteropServices.COMException: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
at Microsoft.Web.Administration.Interop.IAppHostAdminManager.GetAdminSection(String bstrSectionName, String bstrPath)
at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, String moduleName, String moduleType, ExchangeVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetLiveIdBasicAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, ADExchangeServiceVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServiceVirtualDirectory`1.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewPushNotificationsVirtualDirectory.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[03/23/2015 22:06:58.0389] [1] [ERROR] The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
[03/23/2015 22:06:58.0389] [1] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0390] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___75f8c93d15314369983d33ec0742e189 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03/23/2015 22:06:58.0390] [1] Setup is stopping now because of one or more critical errors.
[03/23/2015 22:06:58.0390] [1] Finished executing component tasks.
[03/23/2015 22:06:58.0406] [1] Ending processing Install-ClientAccessRole
It says it can not log on with the supplied details, but the account is an Administrator account with full privileges so I can't see why this would be the case. -
Issues trying to recover failed Exchange Server 2013 in a DAG
Having several issues attempting to recover a failed Exchange Server 2013. To start out, the failed server was mounted on a virtual server using hyper-v. The virtual server failed due to some hard drive partition issues and would no longer boot. As there
really was no purpose to having Exchange on a Virtual Server I decided to rename the host to the same name as the virtual server. I reset the name in AD and proceeded to rename the server. Then made sure all the necessary things were installed and proceeded
to do a recovery installation. I neglected to properly delete the old databases belonging to that server. I simply deleted the files off the hard drive instead of doing it properly. I should mention this is a two node plus witness server installation.Now,
it seems I cannot delete the former server in either ECP or command line. I have attempted to clean up the mess with the old databases but there is one that was mounted only on the failed server that I cannot remove. It seems until I can remove that, I cannot
remove the failed server from the DAG and do a recovery install. The steps shown in the tech net articles to remove a failed database have also failed. At this point I am wondering if I should just give up on the server name and do an install on a new server
name or if someone can give me some information on how to clean up the mess, that would be better I am sure. Here is a list of the things I have tried.
https://technet.microsoft.com/en-us/library/dd876880(v=exchg.150).aspx and in this article, the item mentioned is not in ADSIedit.
http://exchangeserverpro.com/unable-remove-failed-server-dag-exchange-server-2010/
http://exchangeserverpro.com/exchange-2013-how-to-remove-dag-member/ This
article describes one of the problems I am having but the solution is not there.
Thanks to any and all who can offer advice.
Ronald C. PopeThank you for your answer. Running that command results in the following:
[PS] C:\Windows\system32>Remove-MailboxDatabase "Mailbox Database 0939719168"
This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, public folder mailboxes or
arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox -Database"Mailbox Database 0939719168". To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of
archive mailboxes in this database, run the command Get-Mailbox -Database "Mailbox Database 0939719168" -Archive. To get a list of all
public folder mailboxes in this database, run the command Get-Mailbox -Database "Mailbox Database 0939719168" -PublicFolder. To get a
list of all arbitration mailboxes in this database, run the command Get-Mailbox -Database "Mailbox Database 0939719168" -Arbitration.
To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox
<Mailbox ID>. To disable an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox
<Mailbox ID> -Archive. To disable a public folder mailbox so that you can delete the mailbox database, run the command
Disable-Mailbox <Mailbox ID> -PublicFolder. Arbitration mailboxes should be moved to another server; to do this, run
the command New-MoveRequest <parameters>. If this is the last server in the organization, run the command
Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox.
Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan <MailboxPlan ID>
-Database "Mailbox Database 0939719168".
+ CategoryInfo : InvalidOperation: (Mailbox Database 0939719168:DatabaseIdParameter) [Remove-MailboxDatab
ase], AssociatedUserMailboxExistException
+ FullyQualifiedErrorId : [Server=EX01,RequestId=69b60793-fc4f-4dac-beb9-8c9afe381a36,TimeStamp=1/26/2015 6:28:34
PM] 2BA41E0C,Microsoft.Exchange.Management.SystemConfigurationTasks.RemoveMailboxDatabase
+ PSComputerName : ex01.<domain>com
I was able to disable the one mailbox that was listed for the database. I got the following error when attempting the command Get-Mailbox -Database"Mailbox Database 0939719168"
[PS] C:\Windows\system32>Get-MailboxPlan Database "Mailbox Database 0939719168"
Get-MailboxPlan : The term 'Get-MailboxPlan' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
At line:1 char:1
+ Get-MailboxPlan Database "Mailbox Database 0939719168"
+ ~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Get-MailboxPlan:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
the public folder and archive switch simply return a command prompt leading me to believe that there are no public or archive boxes on that database.
Ron -
Exchange Server 2013 on Srvr2012r2 fails on preinstall
During the preinstall of the Exchange server 2013 on virtual Server 2012r2 the installation fails at the second step of the preinstall. I tried the wizard and it also fails station the user does not have the correct rights.
This was probably caused by myself. When I first installed the Exchange I did not install the client and mailbox items. When I found out this was an error I uninstalled it and tried to reinstall.
Bonnie Whalonhi Bwhalon.. your both the commands are incorrect..
1. it misses a parameter required somwhere
2. the role service which you have asked to install is incorrect..may be mistyped
ok now you can use below two way ...
1. Command...
Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45,
Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service,
Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
take from http://technet.microsoft.com/en-us/library/bb691354%28v=exchg.150%29.aspx
after this you can start the install
2. Graphical install : check below links .. this is step by step procedure
http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
Let me know if this helps...
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin -
Installation error for Exchange Server-2013
I am trying to install exchange server-2013 on my Windows server-2012
machine. I have configured per-requisite applications and develop the server environment with active directory roles.
At my readiness check option, it shows the following error:-
"An unsupported operating system was detected . Exchange server-2013 client access and mailbox server roles support windows server -2008R2 SP1 or later and windows server-2012".
I am not using any V-machine or option. So how do i resolve the issue to install the Exchange server-2013? Please help me.
Regard
Azad
Azadur Sarker 6, Seaford street Stoke-on-Trent, ST4 2EUHi I found after promoting the exchange server as a Domain controller re-installing AD prep and running extending Schema completed successfully , I'm now able to get rid of exchange cmdlet logs event id and can successfully see and connect through the
exchange 2013 management shell
"Get-Exchangeserver"
However still not able to connect to https://localhost/eac and when i re-run setup
01-28-2014 21:10:16.0804] [0] Starting Microsoft Exchange Server 2013 Setup
[01-28-2014 21:10:16.0804] [0] **********************************************
[01-28-2014 21:10:16.0804] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[01-28-2014 21:10:16.0804] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[01-28-2014 21:10:16.0804] [0] Setup version: 15.0.516.32.
[01-28-2014 21:10:16.0804] [0] Logged on user: TESTLAB\Administrator.
[01-28-2014 21:10:16.0867] [0] Command Line Parameter Name='sourcedir', Value='D:\'.
[01-28-2014 21:10:16.0867] [0] Command Line Parameter Name='mode', Value='Install'.
[01-28-2014 21:10:16.0882] [0] RuntimeAssembly was started with the following command: '/sourcedir:D: /mode:Install'.
[01-28-2014 21:10:17.0085] [0] The following roles are installed: BridgeheadRole AdminToolsRole
[01-28-2014 21:10:17.0726] [0] Setup is choosing the domain controller to use
[01-28-2014 21:10:17.0820] [0] The MSExchangeADTopology has a persisted domain controller: Exch2013.Testlab.labyyz.testnet.rim.net
[01-28-2014 21:10:18.0023] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use Exch2013.Testlab.labyyz.testnet.rim.net
[01-28-2014 21:10:18.0023] [0] Setup is choosing a global catalog...
[01-28-2014 21:10:18.0023] [0] Setup has chosen the global catalog server Exch2013.Testlab.labyyz.testnet.rim.net.
[01-28-2014 21:10:18.0023] [0] Setup will use the domain controller 'Exch2013.Testlab.labyyz.testnet.rim.net'.
[01-28-2014 21:10:18.0023] [0] Setup will use the global catalog 'Exch2013.Testlab.labyyz.testnet.rim.net'.
[01-28-2014 21:10:18.0023] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0038] [0] Exchange organization container for the organization is 'CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0054] [0] Setup will search for an Exchange Server object for the local machine with name 'EXCH2013'.
[01-28-2014 21:10:18.0210] [0] Exchange Server object found : 'CN=EXCH2013,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0210] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[01-28-2014 21:10:18.0210] [0] The following datacenter roles are unpacked:
[01-28-2014 21:10:18.0210] [0] The following roles are installed: BridgeheadRole AdminToolsRole
[01-28-2014 21:10:18.0210] [0] The local server has some Exchange files installed.
[01-28-2014 21:10:18.0226] [0] Server Name=EXCH2013
[01-28-2014 21:10:18.0242] [0] Setup will use the path 'D:\' for installing Exchange.
[01-28-2014 21:10:18.0257] [0] Setup will discover the installed roles from server object 'CN=EXCH2013,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0257] [0] 'BridgeheadRole' is installed on the server object.
[01-28-2014 21:10:18.0257] [0] The installation mode is set to: 'Install'.
[01-28-2014 21:10:39.0632] [0] An Exchange organization with name 'TestLab' was found in this forest.
[01-28-2014 21:10:39.0632] [0] Active Directory Initialization status : 'True'.
[01-28-2014 21:10:39.0632] [0] Schema Update Required Status : 'False'.
[01-28-2014 21:10:39.0632] [0] Organization Configuration Update Required Status : 'False'.
[01-28-2014 21:10:39.0632] [0] Domain Configuration Update Required Status : 'False'.
[01-28-2014 21:10:39.0632] [0] The locally installed version is 15.0.516.32.
[01-28-2014 21:10:39.0632] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[01-28-2014 21:10:39.0664] [0] Applying default role selection state
[01-28-2014 21:10:39.0710] [0] Setup is determining what organization-level operations to perform.
[01-28-2014 21:10:39.0710] [0] Because the value was specified, setup is setting the argument OrganizationName to the value TestLab.
[01-28-2014 21:10:39.0710] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[01-28-2014 21:10:39.0710] [0] InstallModeDataHandler has 0 DataHandlers
[01-28-2014 21:10:39.0710] [0] RootDataHandler has 1 DataHandlers
[01-28-2014 21:10:40.0273] [0] Finished loading screen IncompleteInstallationDetectedPage.
[01-28-2014 21:11:08.0117] [0] Setup is determining what organization-level operations to perform.
[01-28-2014 21:11:08.0117] [0] Because the value was specified, setup is setting the argument OrganizationName to the value TestLab.
[01-28-2014 21:11:08.0117] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[01-28-2014 21:11:08.0117] [0] InstallModeDataHandler has 0 DataHandlers
[01-28-2014 21:11:08.0117] [0] RootDataHandler has 1 DataHandlers
[01-28-2014 21:11:08.0335] [0] Finished loading screen SetupProgressPage.
[01-28-2014 21:15:30.0513] [0] End of Setup
[01-28-2014 21:15:30.0513] [0] ********************************************** -
Exchange Server 2013: no send/receive after failed CU1- CU2 and machine restore
Hi!
For several reasons, I decided to fully restore my Exchange Server 2013 machine today.
The machine is virtualized on Hyper-V.
I rebooted the server and recovered from backup and Exchange seems to be working fine. However, I cannot receive or send mail. If I try to send a message it goes to the "drafts" folder. OWA and EMC is working. I can not send mail between interna mailboxes
either. Outlook says disconnected.
When running the Exhchange Connectivity Analyzer, I get the following:
- Receive: Connection was successful but no banner was received.
- Send: Successfull. However when trying to send mail to external mailbox it does not reach that mailbox.
Mailflow was working perfectly at the time of the backup.
Help is much appreciated!
UPDATE 1: When telnet on local server i get SMTP banner. But not on other computers in same subnet.OK. After fiddeling around in ADSIedit and trying to rebuild my Exchange environment I ended ut breaking it completely.
I then restored both my DC (Exchange schema CU2) and my EX (Exchange schema CU1). Scema Versions where the inconsistent as stated.
Then I uninstalled the KB2874216 successfully. After that i tried to Upgrade Exchange to CU2. The Upgrade failed at Mailbox Role: Mailbox Service With error Message:
The following error was generated when "$error.Clear();
if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
$dispname = "Microsoft Exchange";
$mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
if ( $mbxs.length -eq 0)
$dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
$arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
$sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispname )
set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
# No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
# This can be remove after BUG(O15#2555914) is fixed.
if ($sysMbx.RetentionPolicy -eq $null )
$arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
else
write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".
Seems the problem was corrupted arbitrary system mailboxes from previous Exchange 2010 to Exchange 2013 migration.
The solution for me was to restore the corrupted arbitrary mailboxes using this
LINK. It is for 2010 but Works on 2013.
I am now currently on Exchange CU2 on both my EX server and on my DC. Now I have to check mail flow and will report back. -
Exchange Server 2013 CU7 Upgrade Failed
I am trying to upgrade Exchange Server 2013 SP1 to CU7 but after complete 46% of Mailbox Role Transport Service the Upgrade Failed and automatically rebooted the server. After restart its showing memory dump. How can we solved it.
Hi livesayed,
According to your description, we cannot get the key of this question.
Would you please help to collect related event log or setup log? It’s more helpful for further troubleshooting.
Besides, I find an similar thread about Exchange 2013 CU2 upgrade to CU3 Failed at Front End Transport Service, for your reference:
https://social.technet.microsoft.com/Forums/office/en-US/32e06b5b-76bb-45d0-bf99-0b83c3182199/exchange-2013-cu2-upgrade-to-cu3-failed-at-front-end-transport-service?forum=exchangesvrdeploy
Best Regards,
Allen Wang
Maybe you are looking for
-
Got a 5s, love, however I was wondering, the color white seems "yellowish". I was able to get one (AT&T) through Best Buy, and ordered one through Apple. Both phones seems to have the white color issue. I went to the Apple store and compared the scre
-
Keep getting a pop up that claims the iTunes Store is "unavailable". We've been getting that pop up for 3 months now
-
Availability of SAP Automotive and DBM
Hello, We are looking for information regarding the availability of SAP Automotive and SAP DBM in the following countries (Romania, Poland, Slovenia, Slovakia, Hungary, and Russia). Could someone help us understand what the release plan for these pro
-
Text not working in photoshop.
can someone help as my text tool is not working think i might have downloaded a corrupt font but cos ive used that many not sure which one. any help would be apreciated
-
I have a Verizon landline and on one of my phones (a corded phone) I always hear news reports in the background. How do I stop this? Thank you.