Exchange Server 2013 installer will not start or complete

Hello,
I am trying to MS Exchange Server onto a Windows Server 2012R2 with Active Directory network. I had started an installation process and it shot out a list of pre-requisites that server need before it can attempt to install. I fulfilled every pre-requisite.
Rebooted the server. Now whenever I attempt another installation process again. It starts, gathers information, and quits with event log:
Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 15.0.516.32. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MS Exchange Server is not listed in Programs and Features to even remove, is it a faulty Microsoft Installer? I have already rebooted numerous times to no avail.
EDIT: Here's a copy of the MSI log, I couldn't find anything to indicate what's going wrong myself, http://pastebin.com/LwCAimuF

Hi,
I've downloaded (as per instructions above):
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Again, the installer repeats the same behavior as before, right now I am running a repair tool on .Net repair tool.
New log http://pastebin.com/SDynMaDe
Edit: Looks like there's long list of issues trying to fulfill Exchange Pre Requisite.
Windows Management Framework 4.0
http://www.microsoft.com/en-us/download/details.aspx?id=40855
"The certificate for the signer of the message is invalid or not found"
It would probably be best to re-install Windows Server again

Similar Messages

Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please advice

The Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Exchange server 2013 Installation issue

Dear Experts,
Thanks in advance...
I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
Dell Laptop Intel I5 1.7 GHZ
RAM -8GB
Vmware workstation 9.
Steps I followed
Created a VM inside Vmware and Installed windows 2012 Std. Edition
Memory assigned to VM is 1 GB
All prerequisites completed and tried to Install Exchange server 2013 SP1
During installation it asked me to select the role to Install and I selected Mailbox server role and CAS
Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error setup could not completed .
Please find the logs for your reference.............
04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
[04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
[04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
[04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
[04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
[04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
[04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
[04/13/2015 08:41:13.0567] [0] Starting file's copying...
[04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
[04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
[04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
[04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
[04/13/2015 08:42:55.0484] [0] File's copying finished.
[04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
[04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
[04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
See the Exchange setup log for more information on this error.
[04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
[04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
[04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.'.
[04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
[04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
[04/13/2015 08:43:32.0739] [0] The following roles are installed:
[04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
[04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
[04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
[04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
[04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
[04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
[04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0536] [0] Applying default role selection state
[04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
[04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
[04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
[04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
[04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
[04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
[04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
[04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
[04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
[04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
[04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
[04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
[04/13/2015 08:46:30.0221] [0] Finished loading screen
Regards
Biswajeet

Hi,
Please find the DC Health check report.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = EX-13
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Connectivity
         ......................... EX-13 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Advertising
         ......................... EX-13 passed test Advertising
      Starting test: FrsEvent
         ......................... EX-13 passed test FrsEvent
      Starting test: DFSREvent
         ......................... EX-13 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... EX-13 passed test SysVolCheck
      Starting test: KccEvent
         ......................... EX-13 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... EX-13 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... EX-13 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... EX-13 passed test NCSecDesc
      Starting test: NetLogons
         ......................... EX-13 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... EX-13 passed test ObjectsReplicated
      Starting test: Replications
         ......................... EX-13 passed test Replications
      Starting test: RidManager
         ......................... EX-13 passed test RidManager
      Starting test: Services
         ......................... EX-13 passed test Services
      Starting test: SystemLog
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:37
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:49
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:02:02
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         ......................... EX-13 failed test SystemLog
      Starting test: VerifyReferences
         ......................... EX-13 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : NETMAGIC
      Starting test: CheckSDRefDom
         ......................... NETMAGIC passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... NETMAGIC passed test CrossRefValidation
   Running enterprise tests on : NETMAGIC.IN
      Starting test: LocatorCheck
         ......................... NETMAGIC.IN passed test LocatorCheck
      Starting test: Intersite
         ......................... NETMAGIC.IN passed test Intersite
Regards
Biswajeet

Exchange Server 2013: Installation fails

Migrating SBS 2008 to Windows Server 2012 R2 (no virtualization) and Exchange Server 2013 SP1
(1) ADprep on SBS 2008 went fine
(2) Installed necessary feature for Exchange (website “Part 1: Step-by-Step Exchange 2007 to 2013 Migration”)
A) the first time I installed Exchange 2013, the setup succeeded, however there were several ecp/WinRM errors.
B) restored Windows Server 2012 R2 to the state (2). Removed from AD (ADSI Edit)
… CN=Services; CN=Exchange; CN=First Organization; CN=Exchange Administrator Group; CN=Servers
delete new Win 2012 server
Run Exchange setup again:
The following error was generated when "$error.Clear();
if ($RoleStartTransportService)
start-SetupService -ServiceName MSExchangeTransport -MaxWaitTimeForRunningState 0:0:40
" was run: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
Checked:
- IPv6 is enabled, but was setup correctly after installing ADDS role)
- Administrators (Group) is a member of the Exch. Trusted Subsystem
Probably there is an AD problem, after the restoration (B) (bare metal) of the Win 2012 server.
Please help!
Fulco

Hi
the error states that the MSExchangeTransport service failed to start. Can you manually try starting the service and then run the setup again?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exchange Server 2013 Installation error

Hi Support,
I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>CD\
C:\>E:
E:\>cd pradeep\Ex Setup 2013
E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
erms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis FAILED
A reboot from a previous installation is pending. Please restart the system
and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.RebootPending.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
E:\pradeep\EX Setup 2013>

Hi ,
Please have a look in to the error message
"A reboot from a previous installation is pending. Please restart the system
and then rerun Setup."
Reboot the server and try again .
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Exchange Server 2013 installation error at Step 10/15

I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
Windows Server 2012, have already install on it:
AD CD
DNS
IIS
Exchange 2013 Prerequisites for Win.Server 2012 like described here
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
And the (winner) error message is:
Exchange Server component Mailbox role: Client Access service failed.
Error: Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
I search online for a solution and I found many others with same problem but any solution yet. :(
If anyone can help me I am able to dedicate him my next ode.
Thank you,
Adrian

I am experiencing the same problem except that mine is definitely NOT a domain controller. The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
"...Could not grant Network Service access to the certificate"
Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities. Granting rights to the certificate during the Setup process is the root of the problem.
Here is the complete error comment:
The following error was generated when "$error.Clear();
          Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.".

Adobe AIR Application Installation will not start

I purchased a program called Video Alchemy which requires Adobe AIR to run but the installation window will not display and the installation does not start.
The Adobe AIR log install log file can be found here https://dl.dropboxusercontent.com/u/59423416/Install.log
Here is a link to the VideoAlchemy.exe install file https://dl.dropboxusercontent.com/u/59423416/VideoAlchemy.exe
Can anyone help me to get this program to install?

Thanks for the reply and solution MrSykes.
I uninstalled adobe AIR and ran a file and registry cleaner to delete any left over files and installs.
Then installed the v.15 Adobe AIR beta as recommended.
The cleaners I used (ccleaner & jv16 power tools) did find some temporary install files and remnants of the Video Alchemy install.
Tried the install again and still no installation window displays.
I'm running Windows 7 on my PC and even changed the installation file compatibility to Windows XP service pack 2 to no avail.
Funny that it installed fine on my notebook with Adobe AIR latest version running Windows 7.
I'm watching task manager as I'm attempting the install and videoalchemy.exe has some cpu usage then drops to zero activity.
Then Adobe AIR application Installer starts up then cycles to zero cpu activity.
I'm stumped on this one :-(
Thanks again for investing the time on my behalf.
Regards
Stephen

Exchange server 2013 Standard will support for Exchange cal Enterprise???

Hi,
We have Purchased Exchange Server 2013 STD Edition and Exchange server CALs are Enterprise.
is it compatable for this...
can u give reply for this...

Hello Sashys,
Here’s full explanation:
http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx. You should have at least standard CAL for each of your users. Enterprise CAL's are an add-on to the standard license, that provides additional
features. Moreover both types of CAL's can be used with either Exchange server 2013 Standard or Exchange server Enterprise.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

Microsoft Exchange RPC Client Access will not start.

A few days ago all my outlook clients were disconnected. Looking into it and the Microsoft Exchange RPC Client Access service had died. Tried several restarts of the system but the service will not go into a running state. It always says
Starting. But it is actually terminating and restarting. In the system log get Event 7031 - "The Microsoft Exchange RPC Client Access service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be
taken in 5000 milliseconds: Restart the service." I can't find anything else on the error in any log file. Some other info not sure if this related or not. The contentIndex are corrupt and will not rebuild. Get a state of "Failed"
with an error message of "The database has been dismounted." Also at time the system is very sluggish. Mostly right after a reboot for an hour or two. Details about the system are; Running Exchange 2013 SP1 on server 2012 R2. All
roles on one machine. About 20 mailboxes. Database is about 40gig. No VM, just a normal server. plenty of diskspace, memory and CPU. The system has been running fine for about a year. Also, mobile devices and OWA work fine. Mail flow
is fine. Outlook just can't connect.
Tried restoring the databases and logs from before the problem started but that did not help.
Not sure what to try from here.
Thanks

Hi,
Please check whether an unavailable Public Folder database is pointed to in your Exchange 2013 mailbox database as the default public folder database setting.
If there is no legacy public folder database and you are working in a pure Exchange 2013 environment, please remove the default public folder database setting on each Exchange 2013 Mailbox database that points to the deleted public folder database object
in ADSI Edit:
1. Open ADSIEdit, Connect to the Configuration container.
2. Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.
3. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
4. In the right hand pane you will see a list of databases. Right-click the listed database object -> Properties.
5. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database, please clear the value.
6. Click OK.
7. Check the rest of the databases to make sure that they are not populated in the same way.
For more information about this, please refer to:
http://support2.microsoft.com/kb/2962915/en-us
Regards,
Winnie Liang
TechNet Community Support

Problem In Exchange Server 2013 Installation

i am Trying to install exchange server for Lab Purpose and it start normal install ,and it stuck in step 8 of 15 at 98% and give error FMS Initialization
So kindly Give me Proper solution,i have un install each and every things Like DC and agains do the same process but still give problem in 8 of 15 in 98% with FMS.i check on net too but not get a proper solution for its.
regard Abdul Nasir Afridi

I think
Jean-Paul van Ravensberg describes exactly this problem and the solution for it.
First, uninstall Exchange (from "Programs and Features" in Control Panel). Then, restart and repeat the Exchange 2013 installation without the the malware protection - by default, it is set to be installed, and you need to choose "Yes":

Exchange 2007 Information store will not start

Exchange was working fine until the server was rebooted.
Running SBS 2008.
When manually trying to start the information store service receive message " Windows could not start the Microsoft exchange information store service on local computer." Error 1067 the process terminated unexpectedly
I have also run the database recovery tools.
Some logs are shown below.
Microsoft Exchange Warning
The following warning(s) were reported while loading topology information:
get-MailboxDatabase
Completed
Warning:
ERROR: Could not connect to the Microsoft Exchange Information Store service on server SBSERVER.domain.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server SBSERVER.domain.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords.
Warning:
ERROR: Could not connect to the Microsoft Exchange Information Store service on server SBSERVER.domain.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server SBSERVER.domain.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords.
Warning:
ERROR: Could not connect to the Microsoft Exchange Information Store service on server SBSERVER.domain.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server SBSERVER.domain.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords.
get-PublicFolderDatabase
Completed
Warning:
ERROR: Could not connect to the Microsoft Exchange Information Store service on server SBSERVER.domain.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server SBSERVER.domain.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords.

Issue is still the same.
I did not restore yet I am leaving that as the very last option to try.
these are the errors I get.
Faulting application store.exe, version 8.1.240.5, time stamp 0x474279c0, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791adec, exception code 0xc0000374, fault offset 0x00000000000a6e97, process id 0x262c, application start time 0x01ca140851c0c4ba.
store.exe
8.1.240.5
474279c0
ntdll.dll
6.0.6001.18000
4791adec
c0000374
00000000000a6e97
262c
01ca140851c0c4ba
Log Name:      Application
Source:        MSExchange System Attendant Mailbox
Date:          03/08/2009 08:02:19
Event ID:      4001
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SBSERVER.amhashton.local
Description:
A transient failure has occurred. The problem may resolve itself in awhile. The service will retry in 56 seconds. Diagnostic information:
Cannot open mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SBSERVER/cn=Microsoft System Attendant.
Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SBSERVER/cn=Microsoft System Attendant. ---> Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
    Lid: 10648   dwParam: 0x6D9      Msg: EEInfo: Generating component: 2
    Lid: 14744   dwParam: 0x6D9      Msg: EEInfo: Status: 1753
    Lid: 9624    dwParam: 0x6D9      Msg: EEInfo: Detection location: 501
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: SBSERVER.domain.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -1527653632
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 19778
    Lid: 27970   StoreEc: 0x80040115
    Lid: 17730
    Lid: 25922   StoreEc: 0x80040115
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec, DiagnosticContext diagCtx)
   at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName, Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize)
   at Microsoft.Mapi.ConnectionCache.OpenMapiStore(String mailboxDn, Guid mailboxGuid, Guid mdbGuid, ClientIdentityInfo clientIdentity, String userDnAs, OpenStoreFlag openStoreFlags, CultureInfo cultureInfo, String applicationId)
   at Microsoft.Mapi.ConnectionCache.OpenMailbox(String mailboxDn, Guid mailboxGuid, Guid mdbGuid, WindowsIdentity windowsIdentityAs, String userDnAs, OpenStoreFlag openStoreFlags, CultureInfo cultureInfo, String applicationId)
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags)
   at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsAdmin(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString, Boolean useLocalRpc, Boolean ignoreHomeMdb)
   at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsAdmin(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.Servicelets.SystemAttendantMailbox.Servicelet.Work()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange System Attendant Mailbox" />
    <EventID Qualifiers="49152">4001</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-08-03T07:02:19.000Z" />
    <EventRecordID>66028</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SBSERVER.domain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>56</Data>
    <Data>Cannot open mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SBSERVER/cn=Microsoft System Attendant.</Data>
    <Data>Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SBSERVER/cn=Microsoft System Attendant. ---> Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
    Lid: 10648   dwParam: 0x6D9      Msg: EEInfo: Generating component: 2
    Lid: 14744   dwParam: 0x6D9      Msg: EEInfo: Status: 1753
    Lid: 9624    dwParam: 0x6D9      Msg: EEInfo: Detection location: 501
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: SBSERVER.domain.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -1527653632
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 19778
    Lid: 27970   StoreEc: 0x80040115
    Lid: 17730
    Lid: 25922   StoreEc: 0x80040115
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec, DiagnosticContext diagCtx)
   at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName, Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize)
   at Microsoft.Mapi.ConnectionCache.OpenMapiStore(String mailboxDn, Guid mailboxGuid, Guid mdbGuid, ClientIdentityInfo clientIdentity, String userDnAs, OpenStoreFlag openStoreFlags, CultureInfo cultureInfo, String applicationId)
   at Microsoft.Mapi.ConnectionCache.OpenMailbox(String mailboxDn, Guid mailboxGuid, Guid mdbGuid, WindowsIdentity windowsIdentityAs, String userDnAs, OpenStoreFlag openStoreFlags, CultureInfo cultureInfo, String applicationId)
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)
   at Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags)
   at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsAdmin(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString, Boolean useLocalRpc, Boolean ignoreHomeMdb)
   at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsAdmin(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.Servicelets.SystemAttendantMailbox.Servicelet.Work()</Data>
</EventData>
</Event>
I can send an xml report from exbpa if you like
Thanks

Exchange Server 2013 Management Pack - not reporting Operations Manager 2012

Hi,
We've installed the Exchange 2013 Management Pack into SCOM2012 but nothing seems to be reporting back. There nothing in Organization Status or Server Health.
The Agent is installed on the Exchange Server. There are Event ID's on the Exchange server of 20070; 21006 & 21016
The server itself is showing as Healthy under Agent Managed.
Is there any other configuration that needs to be done on either SCOM or the Exchange Server?
Thanks
Stephen

Hi Stephen,
Have you figured out how to get the management pack working on your environment?
While I was doing some maintenance on exchange, I've restarted the server and then restarted SCOM monitoring agent service and it worked.
I know that this isn't a fix but it's how to got it working...
Hope this help

Apache Server in OSX will not start up

I have installed Darwin Quicktime Streming server on to my iBook and I think it has effected my Web Sharing. I can not start up my web server anymore. MSQL still runs, but I can't start web sharing. I have turn off MYSQL, but still no joy.
I also don't no how to start up the Darwin QTSS, yes sounds silly, but any help would be great..... It is holding me back from doing any Dynamic Web Dev.
Then again saying all that it might not not be anything to do with Darwin QTSS

Hi Guys
Anyway this is the error log from my iBook, any help would be great.
[Sat Apr 8 01:38:26 2006] [warn] module mod_php4.c is already added, skipping
[Sat Apr 8 01:38:26 2006] [crit] (48)Address already in use: make_sock: could not bind to port 80
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/dto.conf
Processing config file: /private/etc/httpd/users/ftpclient.conf
Processing config file: /private/etc/httpd/users/seshan.conf
[Sat Apr 8 09:27:56 2006] [warn] module mod_php4.c is already added, skipping
[Sat Apr 8 09:27:56 2006] [crit] (48)Address already in use: make_sock: could not bind to port 80
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/dto.conf
Processing config file: /private/etc/httpd/users/ftpclient.conf
Processing config file: /private/etc/httpd/users/seshan.conf
[Sat Apr 8 11:41:26 2006] [warn] module mod_php4.c is already added, skipping
[Sat Apr 8 11:41:26 2006] [crit] (48)Address already in use: make_sock: could not bind to port 80

Exchange 2013 Services Will Not Start

Server is a new setup with Server 2012 Standard. Installed Exchange 2013. Got everything up and running correctly.
Installed MySQL in prep for another application that required MySQL. MySQL installed C++ 2010 and required CGI for IIS. E-mail immediately stopped flowing. Restarted the server and now to just get to the log in screen takes 30+ minutes and most of the Exchange
services fail to start.
I removed MySQL and the C++ 2010. Ran a repair on C++2012 and still takes forever to get to the log in screen and the Exchange services are still failing.
Any ideas on what is going on?
Level Date and Time
Source Event ID
Task Category
Error 11/7/2012 2:51:14 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:51:14 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:51:14 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Error 11/7/2012 2:51:14 PM
Service Control Manager 7031
None The Microsoft Exchange Frontend Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:51:06 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:51:06 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:51:06 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Error 11/7/2012 2:51:05 PM
Service Control Manager 7031
None The Microsoft Exchange Throttling service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Information 11/7/2012 2:51:01 PM
Service Control Manager 7036
None The Software Protection service entered the stopped state.
Error 11/7/2012 2:50:57 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:57 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:57 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Information 11/7/2012 2:50:56 PM
Service Control Manager 7036
None The Device Setup Manager service entered the stopped state.
Information 11/7/2012 2:50:56 PM
Service Control Manager 7036
None The Windows Modules Installer service entered the stopped state.
Information 11/7/2012 2:50:51 PM
Service Control Manager 7036
None The Portable Device Enumerator Service service entered the stopped state.
Error 11/7/2012 2:50:48 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:48 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:48 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Error 11/7/2012 2:50:47 PM
Service Control Manager 7031
None The Microsoft Exchange Throttling service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:46 PM
Service Control Manager 7031
None The Microsoft Exchange Mailbox Transport Delivery service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:39 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:39 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:39 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Information 11/7/2012 2:50:31 PM
Service Control Manager 7036
None The Windows Remote Management (WS-Management) service entered the running state.
Error 11/7/2012 2:50:31 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:31 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:31 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Information 11/7/2012 2:50:31 PM
Service Control Manager 7036
None The User Access Logging Service service entered the running state.
Warning 11/7/2012 2:50:31 PM
Microsoft-Windows-WinRM 10154
None "The WinRM service failed to create the following SPNs: WSMAN/mail.XXXXXXX.net; WSMAN/mail.
Additional Data
The error received was 8344: %%8344.
User Action
The SPNs can be created by an administrator using setspn.exe utility."
Information 11/7/2012 2:50:31 PM
Microsoft-Windows-WinRM 10148
None "The WinRM service is listening for WS-Management requests.
User Action
Use the following command to see the specific IPs on which WinRM is listening:
winrm enumerate winrm/config/listener"
Information 11/7/2012 2:50:28 PM
Service Control Manager 7036
None The Software Protection service entered the running state.
Error 11/7/2012 2:50:28 PM
Service Control Manager 7031
None The Microsoft Exchange Throttling service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.

It still applies to Exchange 2013 SP1 and Server 2012 R2.
Thank you so much. You really saved my day!

Exchange Server 2013: Installation failed while installing Mailbox role.

Hi,
Mailbox role installation failed. I tried to remove and reinstall so many times but it still fails. (but the uninstall is complete)
Below is log from the lastest installation. Could you please help to veify the problem.
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog
-Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".

Hi,
See if deleting the account SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} in ADUC (you should find it in the Users Container) and then rerun
setup.exe /preparead helps you solve your problem.
Martina Miskovic

Exchange Server 2013 installer will not start or complete

Similar Messages

Maybe you are looking for