Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

Hi, all
I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
Thank you.
Nile

Hi,
How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
Please check the application log on the problematic Exchange server and see whether there are any related event error.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Similar Messages

Exchange Server 2013 Management Pack - not reporting Operations Manager 2012

Hi,
We've installed the Exchange 2013 Management Pack into SCOM2012 but nothing seems to be reporting back. There nothing in Organization Status or Server Health.
The Agent is installed on the Exchange Server. There are Event ID's on the Exchange server of 20070; 21006 & 21016
The server itself is showing as Healthy under Agent Managed.
Is there any other configuration that needs to be done on either SCOM or the Exchange Server?
Thanks
Stephen

Hi Stephen,
Have you figured out how to get the management pack working on your environment?
While I was doing some maintenance on exchange, I've restarted the server and then restarted SCOM monitoring agent service and it worked.
I know that this isn't a fix but it's how to got it working...
Hope this help

Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!

Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Windows client monitoring Management packs for SCOM 2012

Hello All,
Please provide the link for windows client monitor management pack for SCOM 2012 SP1 ,if there is any available .
I have got one link for this but it is for SCOM 2007 .
Regards
Richa KM

http://www.microsoft.com/en-us/download/details.aspx?id=15700
Yes you can download from this link and you can import it in scom 2012 sp1.although it is for scom 2007

Microsoft Intune Management Pack for SCOM 2012 R2

Hi,
Is Management Pack of Microsoft Intune available to monitor the Intune Alerts and view the Intune dashboard ?
Is any API available of Intune for SCOM to view the Dashboard etc..?
Shailendra Dev

Hi
Nope, there is no Management pack available. You can check the Management pack here
http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx it is the most accurate list. For checking Intune Status check this Dashboard
http://status.manage.microsoft.com/StatusPage/ServiceDashboard
Cheers,
Stefan
Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

Exchange server 2013 Installation issue

Dear Experts,
Thanks in advance...
I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
Dell Laptop Intel I5 1.7 GHZ
RAM -8GB
Vmware workstation 9.
Steps I followed
Created a VM inside Vmware and Installed windows 2012 Std. Edition
Memory assigned to VM is 1 GB
All prerequisites completed and tried to Install Exchange server 2013 SP1
During installation it asked me to select the role to Install and I selected Mailbox server role and CAS
Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error setup could not completed .
Please find the logs for your reference.............
04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
[04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
[04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
[04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
[04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
[04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
[04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
[04/13/2015 08:41:13.0567] [0] Starting file's copying...
[04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
[04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
[04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
[04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
[04/13/2015 08:42:55.0484] [0] File's copying finished.
[04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
[04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
[04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
See the Exchange setup log for more information on this error.
[04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
[04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
[04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.'.
[04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
[04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
[04/13/2015 08:43:32.0739] [0] The following roles are installed:
[04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
[04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
[04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
[04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
[04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
[04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
[04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0536] [0] Applying default role selection state
[04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
[04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
[04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
[04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
[04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
[04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
[04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
[04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
[04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
[04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
[04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
[04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
[04/13/2015 08:46:30.0221] [0] Finished loading screen
Regards
Biswajeet

Hi,
Please find the DC Health check report.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = EX-13
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Connectivity
         ......................... EX-13 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Advertising
         ......................... EX-13 passed test Advertising
      Starting test: FrsEvent
         ......................... EX-13 passed test FrsEvent
      Starting test: DFSREvent
         ......................... EX-13 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... EX-13 passed test SysVolCheck
      Starting test: KccEvent
         ......................... EX-13 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... EX-13 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... EX-13 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... EX-13 passed test NCSecDesc
      Starting test: NetLogons
         ......................... EX-13 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... EX-13 passed test ObjectsReplicated
      Starting test: Replications
         ......................... EX-13 passed test Replications
      Starting test: RidManager
         ......................... EX-13 passed test RidManager
      Starting test: Services
         ......................... EX-13 passed test Services
      Starting test: SystemLog
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:37
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:49
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:02:02
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         ......................... EX-13 failed test SystemLog
      Starting test: VerifyReferences
         ......................... EX-13 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : NETMAGIC
      Starting test: CheckSDRefDom
         ......................... NETMAGIC passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... NETMAGIC passed test CrossRefValidation
   Running enterprise tests on : NETMAGIC.IN
      Starting test: LocatorCheck
         ......................... NETMAGIC.IN passed test LocatorCheck
      Starting test: Intersite
         ......................... NETMAGIC.IN passed test Intersite
Regards
Biswajeet

Exchange Server 2013 installer will not start or complete

Hello,
I am trying to MS Exchange Server onto a Windows Server 2012R2 with Active Directory network. I had started an installation process and it shot out a list of pre-requisites that server need before it can attempt to install. I fulfilled every pre-requisite.
Rebooted the server. Now whenever I attempt another installation process again. It starts, gathers information, and quits with event log:
Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 15.0.516.32. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MS Exchange Server is not listed in Programs and Features to even remove, is it a faulty Microsoft Installer? I have already rebooted numerous times to no avail.
EDIT: Here's a copy of the MSI log, I couldn't find anything to indicate what's going wrong myself, http://pastebin.com/LwCAimuF

Hi,
I've downloaded (as per instructions above):
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Again, the installer repeats the same behavior as before, right now I am running a repair tool on .Net repair tool.
New log http://pastebin.com/SDynMaDe
Edit: Looks like there's long list of issues trying to fulfill Exchange Pre Requisite.
Windows Management Framework 4.0
http://www.microsoft.com/en-us/download/details.aspx?id=40855
"The certificate for the signer of the message is invalid or not found"
It would probably be best to re-install Windows Server again

Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

Hi All
We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
Kind Regards
Please note that I have previously posted this in another forum but was advised to post here in this forum.

Hi,
I find your post on Office forum:
http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
About "And are they dependent on the Office Service Pack?", I will give the answer.
Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
If you want to know more about the Exchange new features, please see Exchange Team Blog.
Find blog about SP1 for your reference:
http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013

Hi all to every techies ....
I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated ,
The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER
Thank you all
Neil Patric

Hi,
To understand more about the issue, I’d like to confirm the detail error when the installation failed.
As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
2. Installing the Exchange Server 2013 pre-requisites on the server
3. Running Exchange Server 2013 setup
For more information, you can refer to the following article:
http://exchangeserverpro.com/how-to-install-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support

Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2

Hi Team,
Need urgent help in resolution of following error:
Environment Details: VMware ESXi 5.5 (vMotion)
Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
Prerequisites: Installed
Error: Installation gives Error at Step 10 during installation of Mailbox Service
Error Details Below:
Error:
The following error was generated when "$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
$WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
if ((get-service wsbexchange).Status -eq "Running")
Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
Exchange /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
" was run: "Process execution failed with exit code 1.".

Resolved ! :)
Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
Thanks to all.

Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?

Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years. However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
level, or as a (sophisticated) user. I have never tried to deploy either from scratch before. My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
software as Windows XP back when it was new. And even NetWare once.
When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements. For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
storage. There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
and phones, a secure file store, and not much else. If Exchange didn't need it, I would not need to install Active Directory, for example. We have no direct need for its services.
So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else. And it appears
I ought to be able to do it without virtualizing any of it. However, I have spent the last three or four days fighting one mysterious issue after another. I had Remote Access VPN working and fairly stable very quickly (although it takes a very
long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me. But I've always been able to get it back after scrounging through the
logs to find out what is bothering it. I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time). At one point I even received a number of e-mails
on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
But then Exchange Server just stopped. There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
the server or remotely).
So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
a single Windows Server 2012 server? And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)? If it can be done, can anyone provide any pointers on what
the pitfalls are that may be causing my problems? I am happy to provide whatever additional information anyone might like to help figure it out.
Thanks!

An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
should be back to normal.

Not able to install Exchange Server 2013 on Windows Server 2012

I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
thanks :

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

How to get list of Users[MailBoxes] in Exchange Server 2013 by using EWS Managed API

Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users login name.
I was created Full Access permissions of all users to Admin user account, to access each user Mailbox programatically
i need the list of Mailboxes in exchange server .
MailBox mailbox = new MailBox("user");
Please share your ideas

Hi,
We can run the following command in Exchange Management Shell to get all user mailboxes name and export it to a .csv file:
Get-Mailbox -ResultSize Unlimited | Select Name,Alias,RecipientTypeDetails | Export-Csv c:\Users.csv
If you want to retrieve the list of users by using EWS Managed API, I suggest you can ask a question in Exchange Development forum for more suggestion:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
Regards,
Winnie Liang
TechNet Community Support

Get list of User Mailboxes in Exchange server 2013 by using EWS managed API

Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users log in name.
i know the command in Powershell to get list, but i need this using code[ ews managed API].
How can i achieve this ?
Please share your ideas

Hi Glen,
i follow your suggested links i wrote below code ,
here i am getting error
The term 'Get-Users' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
SecureString password = new SecureString();
string str_password = "EIS2014!@#";
string username = "[email protected]";
foreach (char x in str_password) { password.AppendChar(x); }
PSCredential credential = new PSCredential(username, password);
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://ExchangeServer.admin.com/powershell"), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", credential);
//connectionInfo.AuthenticationMechanism = AuthenticationMechanism.Basic;
Runspace runspace = RunspaceFactory.CreateRunspace(connectionInfo);
PowerShell powershell = PowerShell.Create();
PSCommand command = new PSCommand();
command.AddCommand("Get-Users");
command.AddParameter("ResultSize", 50);
powershell.Commands = command;
runspace.Open();
powershell.Runspace = runspace;
var aa = powershell.Invoke();
Please help me.

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

Similar Messages

Maybe you are looking for