Exchange Server 2013 Management Pack - not reporting Operations Manager 2012

Hi,
We've installed the Exchange 2013 Management Pack into SCOM2012 but nothing seems to be reporting back. There nothing in Organization Status or Server Health.
The Agent is installed on the Exchange Server. There are Event ID's on the Exchange server of 20070; 21006 & 21016
The server itself is showing as Healthy under Agent Managed.
Is there any other configuration that needs to be done on either SCOM or the Exchange Server?
Thanks
Stephen

Hi Stephen,
Have you figured out how to get the management pack working on your environment?
While I was doing some maintenance on exchange, I've restarted the server and then restarted SCOM monitoring agent service and it worked.
I know that this isn't a fix but it's how to got it working...
Hope this help

Similar Messages

Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

Hi, all
I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
Thank you.
Nile

Hi,
How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
Please check the application log on the problematic Exchange server and see whether there are any related event error.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange Server 2013 installer will not start or complete

Hello,
I am trying to MS Exchange Server onto a Windows Server 2012R2 with Active Directory network. I had started an installation process and it shot out a list of pre-requisites that server need before it can attempt to install. I fulfilled every pre-requisite.
Rebooted the server. Now whenever I attempt another installation process again. It starts, gathers information, and quits with event log:
Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 15.0.516.32. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MS Exchange Server is not listed in Programs and Features to even remove, is it a faulty Microsoft Installer? I have already rebooted numerous times to no avail.
EDIT: Here's a copy of the MSI log, I couldn't find anything to indicate what's going wrong myself, http://pastebin.com/LwCAimuF

Hi,
I've downloaded (as per instructions above):
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Again, the installer repeats the same behavior as before, right now I am running a repair tool on .Net repair tool.
New log http://pastebin.com/SDynMaDe
Edit: Looks like there's long list of issues trying to fulfill Exchange Pre Requisite.
Windows Management Framework 4.0
http://www.microsoft.com/en-us/download/details.aspx?id=40855
"The certificate for the signer of the message is invalid or not found"
It would probably be best to re-install Windows Server again

Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!

Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange server 2013 Installation issue

Dear Experts,
Thanks in advance...
I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
Dell Laptop Intel I5 1.7 GHZ
RAM -8GB
Vmware workstation 9.
Steps I followed
Created a VM inside Vmware and Installed windows 2012 Std. Edition
Memory assigned to VM is 1 GB
All prerequisites completed and tried to Install Exchange server 2013 SP1
During installation it asked me to select the role to Install and I selected Mailbox server role and CAS
Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error setup could not completed .
Please find the logs for your reference.............
04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
[04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
[04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
[04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
[04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
[04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
[04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
[04/13/2015 08:41:13.0567] [0] Starting file's copying...
[04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
[04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
[04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
[04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
[04/13/2015 08:42:55.0484] [0] File's copying finished.
[04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
[04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
[04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
See the Exchange setup log for more information on this error.
[04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
[04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
[04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.'.
[04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
[04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
[04/13/2015 08:43:32.0739] [0] The following roles are installed:
[04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
[04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
[04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
[04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
[04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
[04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
[04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0536] [0] Applying default role selection state
[04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
[04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
[04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
[04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
[04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
[04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
[04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
[04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
[04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
[04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
[04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
[04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
[04/13/2015 08:46:30.0221] [0] Finished loading screen
Regards
Biswajeet

Hi,
Please find the DC Health check report.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = EX-13
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Connectivity
         ......................... EX-13 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\EX-13
      Starting test: Advertising
         ......................... EX-13 passed test Advertising
      Starting test: FrsEvent
         ......................... EX-13 passed test FrsEvent
      Starting test: DFSREvent
         ......................... EX-13 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... EX-13 passed test SysVolCheck
      Starting test: KccEvent
         ......................... EX-13 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... EX-13 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... EX-13 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... EX-13 passed test NCSecDesc
      Starting test: NetLogons
         ......................... EX-13 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... EX-13 passed test ObjectsReplicated
      Starting test: Replications
         ......................... EX-13 passed test Replications
      Starting test: RidManager
         ......................... EX-13 passed test RidManager
      Starting test: Services
         ......................... EX-13 passed test Services
      Starting test: SystemLog
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:37
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:01:49
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         An error event occurred. EventID: 0x0000272C
            Time Generated: 04/14/2015   18:02:02
            Event String:
            DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
m32\dcdiag.exe).
         ......................... EX-13 failed test SystemLog
      Starting test: VerifyReferences
         ......................... EX-13 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : NETMAGIC
      Starting test: CheckSDRefDom
         ......................... NETMAGIC passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... NETMAGIC passed test CrossRefValidation
   Running enterprise tests on : NETMAGIC.IN
      Starting test: LocatorCheck
         ......................... NETMAGIC.IN passed test LocatorCheck
      Starting test: Intersite
         ......................... NETMAGIC.IN passed test Intersite
Regards
Biswajeet

Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

Hi All
We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
Kind Regards
Please note that I have previously posted this in another forum but was advised to post here in this forum.

Hi,
I find your post on Office forum:
http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
About "And are they dependent on the Office Service Pack?", I will give the answer.
Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
If you want to know more about the Exchange new features, please see Exchange Team Blog.
Find blog about SP1 for your reference:
http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

New Exchange Server 2013 in a Exchange 2007 Org, can't get cu's to install

Hi,
We have an Exchange Server 2007 in our organization. I installed an Exchange Server 2013 but could not get the CU3 to install, would throw exceptions. I tried CU2 and it got a lot further but failed to start a service near the end. Don't ask for specifics
as I got frustrated and blew this machine away and installed a fresh VM. I read that you can install the CU's as if they are a fresh installation. I tried this but it fails saying "the Exchange server is in an inconsistant stet....recover". There
IS no Exchange server yet!!
What am I doing wrong? I used the command line for CU3, like: setup /mode:install /roles:ca,mb,mt /IAccept blah blah blah. I didn't set powershell execution policy, not sure if that was it. Are there switches I am missing? I want to see if I can install
the Exchange CU3 right from the get-go.
HeLp!

Hi,
According to the error message, this issue may occur if the previous Exchange installation or un-install failed to complete. This situation leaves the Exchange server
object in Active Directory and prevents a new installation.
We can try:
1. Install ADSI Edit.
2. Launch ADSI Edit. To do this, click Start, click Run, type adsiedit.msc in the text box, and then click OK.
3. Locate the Exchange server object by going to the following location: CN=Configuration, DC= Domain Name, DC=com, CN=Services, CN=Microsoft Exchange, CN=<Organization
Name>, CN=Administrative Groups, CN= <Exchange Administrative Group>, CN=Servers, CN=<Server Name>.
4. Delete the server object.
5. Remove the Exchange server's machine account from Security groups Exchange Servers and Exchange Install Domain Servers.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Get list of User Mailboxes in Exchange server 2013 by using EWS managed API

Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users log in name.
i know the command in Powershell to get list, but i need this using code[ ews managed API].
How can i achieve this ?
Please share your ideas

Hi Glen,
i follow your suggested links i wrote below code ,
here i am getting error
The term 'Get-Users' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
SecureString password = new SecureString();
string str_password = "EIS2014!@#";
string username = "[email protected]";
foreach (char x in str_password) { password.AppendChar(x); }
PSCredential credential = new PSCredential(username, password);
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://ExchangeServer.admin.com/powershell"), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", credential);
//connectionInfo.AuthenticationMechanism = AuthenticationMechanism.Basic;
Runspace runspace = RunspaceFactory.CreateRunspace(connectionInfo);
PowerShell powershell = PowerShell.Create();
PSCommand command = new PSCommand();
command.AddCommand("Get-Users");
command.AddParameter("ResultSize", 50);
powershell.Commands = command;
runspace.Open();
powershell.Runspace = runspace;
var aa = powershell.Invoke();
Please help me.

Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please advice

The Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Exchange Server 2013 Toolbox MMC Error ConsoleInitialize.ps1 not recognised

Hello, after installing and configuring Exchange 2013 during a migration from 2010 (with both versions still running), I am now receiving a ConsoleInitialize.ps1 System.Management.Automation.RemoteException exception when trying to run the Management Toolbox
(I am really after the Queue Viewer).
This is the same when trying to connect locally on the server and remotely on a client computer with Management Tools installed - I can use EMC without any errors locally or remotely.
I have tried various fixes found around the net, including:
Changing the Identity of the Classic and DefaultAppPools in IIS and resetting - from LocalSystem to ApplicationPoolIdentity
Adding the roles to Exchange Organisation Management in AD
Disabling SSL on the Powershell virtual Directory and setting auth to anonymous
I have not tried recreating the Powershell virtual directory as mentioned on a few sites, as I have not been able to test that in the lab, and I am not sure how it affects the powershell session that I am doing it from.
The only thing that I can think that could be an issue is that Ex2010 is still up and running, could it be that Management Tools is looking at the old server, instead of the new?
Can anyone point me in the right direction with this one?
I can post more info if required.
Thank you.
Xpost here: http://serverfault.com/questions/666054/exchange-server-2013-toolbox-mmc-error-consoleinitialize-ps1-not-recognised

Hi,
If the EMS and EMC work properly, I think the powershell cannot be the problem. Is it possible to build up a new Exchange 2013 Server in test environment and make a replacement of
the ConsoleInitialize.ps1 file?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

Hello,
Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
http://www.microsoft.com/en-us/download/details.aspx?id=41394

(1) I had to roll it back:
The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors. It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem. Rolling
back the update and rebooting the server seemed to resolve the issue.
Issues reported before the general mailflow stopping for everyone:
Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
(2)
ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
When he tries to open an e-mail, he gets an error message.
If he tries to mark an e-mail unread, he gets a different message.
Thanks Ben

Not able to install Exchange Server 2013 on Windows Server 2012

I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
thanks :

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Exchange Server 2013: incoming messages are not delivered into user mailboxes occasionally

Exchange Server 2013 CU1, two mailbox servers (DAG, only one mail database), two CAS servers (NLB cluster). Two Sendmail/CentOS-based SMTP relays route mail between Exchange servers and Internet (incoming mail is routed to NLB cluster name).
Usually mail flow is OK: messages are sent and received normally. However, I've got several complains from different users. They state that occasionally they don't receive messages that were sent to them from outside. Tomorrow morning I've decided to
investigate the issue.
So, we have a message sent from Gmail account that was not delivered in user mailbox. It was received and routed to Exchange by Sendmail host:
Jun 27 22:06:37 MX01 sendmail[12169]: r5RG6HC8012166: to=<USER_ADDRESS>, delay=00:00:19, xdelay=00:00:19, mailer=smtp, pri=124702, relay=NLB-FQDN [NLB-IP], dsn=2.0.0, stat=Sent (<CAHgK_sjEkj41htuVsutMP3XhgR5RRDs8-EgSC-UfHoaiHWFj=A@mail.gmail.com>
[InternalId=13069585481819] Queued mail for delivery)
Running Get-MessageTrackingLog applet on the mailbox servers displayed the followed log entries for the message:
DB Server #1:
    22:11:18 HAREDIRECT
    22:11:18 RECEIVE
    22:11:18 AGENTINFO
DB Server #2:
    22:11:18 HARECEIVE
    22:12:44 HADISCARD
So, we can see that the message was placed into shadow queues, but was NOT delivered into mailbox (no DELIVER status entries). Also pay attention to the timing. Time on all the servers is in sync, but Sendmail timestamp is 22:06, and Exchange timestamps
are 5 minutes behind it.
Today a message sent to the same address from the same Google mailbox was received by Exchange and placed into user mailbox with no glitches.
We use Exchange antispam system activated on Exchange mailbox servers. Spam is never dropped silently. It is either returned to sender (SCL 9) or placed into quarantine mailbox (SCL 6 and above). I'm pretty sure that the lost message was not in the quarantine
mailbox this morning, and the sender didn't receive any NDRs.
Any ideas what to investigate next?

Hi,
Do you mean the emails are placed in the Shadow Redundancy queue?
Shadow Redundancy
http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

How to get list of Users[MailBoxes] in Exchange Server 2013 by using EWS Managed API

Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users login name.
I was created Full Access permissions of all users to Admin user account, to access each user Mailbox programatically
i need the list of Mailboxes in exchange server .
MailBox mailbox = new MailBox("user");
Please share your ideas

Hi,
We can run the following command in Exchange Management Shell to get all user mailboxes name and export it to a .csv file:
Get-Mailbox -ResultSize Unlimited | Select Name,Alias,RecipientTypeDetails | Export-Csv c:\Users.csv
If you want to retrieve the list of users by using EWS Managed API, I suggest you can ask a question in Exchange Development forum for more suggestion:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
Regards,
Winnie Liang
TechNet Community Support

Exchange Server 2013 Database not showing in ECP after removal of Exchange Server 2010

I recently complete the migration of my Exchange 2010 server to Exchange 2013. I then proceeded to uninstall the 2010 server using setup.com /m:uninstall. At the end of the process I received an error that it did not complete the uninstall.
I checked the server and Exchanged 2010 was removed. When I checked ECP on 2013 it still showed the old 2010 server listed. I used ADSI edit and manually removed the old sever.
Now when I log into 2013 ECP I only see the one serve but when I go into databases, none are listed. I check under the server itself and it shows the database that it is using but it is not listed under the database tab.
If I do a search under the database tab I can find it and adds it to the list. I can then open and view details.
My issue is, after I log out and then back in, I have to run the search to find the database again. In ideas on how to have it show up in the list like it did before I removed the 2010 Exchange server?
Thank you,

Hi,
From your description, I recommend you verify the following things for troubleshooting:
1. Please make sure that AD replication is completely by checking the user object's homeMDB attribute. This value should contain the DN value of the Exchange Server 2013 mailbox database.
2. Wait 30 minutes for the cache on the Exchange Server 2013 Client Access Server to clear or restart the MSExchangeOWAAppPool on the Exchange Server 2013 Client Access Server.
For more information, here is a kb for your reference.
Exchange 2013 Redirects to Exchange 2010 for OWA and ECP
http://support.microsoft.com/kb/2931385
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Exchange Server 2013 Management Pack - not reporting Operations Manager 2012

Similar Messages

Maybe you are looking for