Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!

Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

  • Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

    Hi, all
    I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
    but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
    Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
    Thank you.
    Nile

    Hi,
    How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
    Please check the application log on the problematic Exchange server and see whether there are any related event error.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

    Hello,
    Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
    Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
    http://www.microsoft.com/en-us/download/details.aspx?id=41394

    (1)  I had to roll it back:
    The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors.  It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem.  Rolling
    back the update and rebooting the server seemed to resolve the issue.
    Issues reported before the general mailflow stopping for everyone:
    Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
    A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
    (2)   
    ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
    OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
    When he tries to open an e-mail, he gets an error message.
    If he tries to mark an e-mail unread, he gets a different message.
    Thanks Ben

  • Exchange server 2013 services need to restart automatically at certain period of time how do i schedule

    Hi All,
    Need to restart exchange server 2013 services automatically at a certain period of time is there a script to schedule to automate can you please help me step by step process.
    Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
    Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

    You can create a PS1 file and run it in a scheduled task.
    The PS1 files will need to have this.
    Restart-Service MSExchangeTransport
    Restart-Service MSexchangeIS
    etc...
    How to add a Scheduled task is given in this link.
    http://www.mikepfeiffer.net/2010/02/creating-scheduled-tasks-for-exchange-2010-powershell-scripts/

  • Performing Exchange Server patching & service pack for mailbox server without losing some data during the rollback ?

    People,
    I'd like to know how can I safely apply the Exchange Server service pack or cumulative update to the Mailbox Server role (no DAG) without losing some email during the downtime and rolling back the snapshot ?
    Can I do the following:
    1. Stop all of the Exchange Server services.
    2. Disconnect the vNIC in Mailbox server
    3. Take VM snapshot
    4. Apply the Exchange Server service Pack / Cumulative Update or Windows Update
    5. Reboot
    6. Reconnect the vNIC, if the server back online again with no issue, commit / delete the snapshot, if not, then disconnect the vNIC followed by roll back.
    would that be make sense or supported from both Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?
    If yu have any other suggestion, please let me know here.
    Thanks in advance.

    Hey AlbertWT,
    I'll start off by saying that I wouldn't do it.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 virtualization: Exchange 2013 Help):
    Some hypervisors include features for taking snapshots of virtual machines. Virtual machine snapshots capture the state of a virtual machine while it's running. This feature enables you to take multiple snapshots of a virtual machine and then revert the virtual machine to any of the previous states by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that maintains state data, such as Exchange. As a result, making virtual machine snapshots of an Exchange guest virtual machine isn't supported.
    Even if we ignore the support statement on snapshots this is still not a good idea.  Here are some things to consider.
    1) Cumulative updates for Exchange make changes to the Active Directory Schema.  Rolling back the snapshot on the Mailbox server will not roll back the changes to AD, which could cause functional and supportability issues.  See this link to give you an idea of how there are AD schema updates in every Exchange CU and service pack: Exchange 2013 Active Directory schema changes: Exchange 2013 Help
    2) It is possible for email to come in during the time that you're testing the update, and if you need to roll back you would need a plan to get that email back.  Third party services could work, or you could prevent email from coming into your environment completely during that time, but those are not ideal solutions.
    A far better solution would be to create a lab environment that is isolated from production.  You could either take clones of your Exchange and AD VMs and put them into a network fenced environment, or create a lab and import your AD structure so it matches production.  I think this is a far better way to test than trying to rely on snapshots in production.
    Hope that helps!
    Matt

  • FYI: TrendMicro antivirus prevents Transport Service from starting after installing Echange Server 2013 Service Pack 1

    I installed Exchange Server 2013 SP1 in my test environment. After that mail flow between internal and external mail servers completely stopped. In the end I discovered that Transport Service on both of the mailbox servers refused to start (or, to be more
    exact, stopped shortly after starting).
    The following events appeared in the System event log:
    Event ID 1052 (error)
    Source: MSExchange Extensibility
    Message: Failed to create agent factory for the agent 'ScanMail SMTP Receive Agent' with error 'Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll'
    due to error 'type not found'.'. Please verify the corresponding transport agent assembly and dependencies with correct version are installed.
    Event ID 16023 (error)
    Source: MSExchangeTransport
    Message: Microsoft Exchange couldn't start transport agents. The Microsoft Exchange Transport service will be stopped. Exception details: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
    Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'. : Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
    Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'.
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
       at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
    Event ID 701 (informational)
    Source: MSExchangeTransport
    Message: The service will be stopped. Reason: Microsoft.Exchange.Transport.TransportComponentLoadFailedException: Loading of component 'SmtpReceiveAgents' failed. ---> Microsoft.Exchange.Transport.TransportComponentLoadFailedException: The agent component
    failed to load. ---> Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to
    error 'type not found'.
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
       at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
       at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
       at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.RunADOperation(ADOperation adOperation, Int32 retryCount)
       at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.TryRunADOperation(ADOperation adOperation, Int32 retryCount)
       at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
       at Microsoft.Exchange.Transport.Components.Activate()
    The reason for that behavior was TrendMicro ScanMail for Exchange 11. Seems that it was unable to work with the new SP properly and prevented the entire Transport Service from starting. Uninstallation of the antivirus eliminated the issue.

    Actually, you can just disable the agents until TrendMicro releases a patch and then enable them again:
    http://community.trendmicro.com/...
    BTW, a similar problem (high CPU utilization and services not starting) is hitting the AVG package:
    http://forums.avg.com/..
    Step by Step Screencasts and Video Tutorials

  • Is there a way to sync Pre-MS Exchange Server 2007 (Service Pack 1) Calendar?

    Hello all,
    I think my company must be using Pre-Microsoft Exchange Server 2007 with Service Pack 1 for our exchange server, because
    I can only set up company Exchange account on MS Entourage, not the new Outlook
    I can only set up the same exchange account only on iPad and iPhone (able to view in Mail, Calendar, Contacts & Reminders)
    But
    I am unable to use Lion's Mail, iCal and Address Book to see my Exchange account
    For the moment, I am not really concern about mail and addresses,
    but can I see my Exchange calendar on my desktop iCal? How do I set it up?
    I guess the most obvious and straight forward way, for now, is to view on my iPad :-)  But it is really funny that the iDevices are backward compatible but yet Lion OS cannot...
    Thanks and cheers.

    Hi,
    Yes it will work, it says enterprise because it works there as well.
    Thanks
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Exchange Server 2013 Management Pack - not reporting Operations Manager 2012

    Hi,
    We've installed the Exchange 2013 Management Pack into SCOM2012 but nothing seems to be reporting back. There nothing in Organization Status or Server Health.
    The Agent is installed on the Exchange Server. There are Event ID's on the Exchange server of 20070; 21006 & 21016
    The server itself is showing as Healthy under Agent Managed.
    Is there any other configuration that needs to be done on either SCOM or the Exchange Server?
    Thanks
    Stephen

    Hi Stephen, 
    Have you figured out how to get the management pack working on your environment?
    While I was doing some maintenance on exchange, I've restarted the server and then restarted SCOM monitoring agent service and it worked.
    I know that this isn't a fix but it's how to got it working...
    Hope this help

  • Update Rollup 7 for Exchange Server 2010 Service Pack 3 (KB2961522)

    This rollups will not install and has caused multiple issues on the Windows SBS 2011.
    The issues are as follows:
    All Exchange and related services were stopped and had to be manually restarted.
    The update fails for multiple reasons, changes every time.
    I am no longer able to perform ANY updates without some sort of error code.
    All Domain client computers now report Security Status as Critical, Servers as not available.
    DNS does not appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
    Running BPA shows no major issues
    I can no longer run the WSUS server cleanup. I get a Connection Error and have to reset the node, but it soon fails again.
    Shared folders may take quite a bit of time to open.
    Any help would be greatly appreciated. I do have an open ticket with Microsoft and although this is rated critical I am not getting any resolution. The only thing that MS support managed to do was bring the server down for an additional day and corrupt my
    EDB files so that they had to be rebuilt. 

    Hi,
    à
    All Exchange and related services were stopped and had to be manually restarted.
    While the update was installed, it will automatically stop Exchange and IIS services. You may need to restart
    manually.
    àThe update fails
    for multiple reasons, changes every time.
    à
    I am no longer able to perform ANY updates without some sort of error code.
    Would you please let me know any of those
    update-failed reasons? Meanwhile, please let me know some error code that you can get when can’t perform updates. Meanwhile, please refer to installation suggestions and tips in following article when install this update rollup.
    Exchange
    2010 SP3 Update Rollup 7 released and installation tips
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    àAll Domain client
    computers now report Security Status as Critical, Servers as not available.
    àDNS does not
    appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
    Please check if ping the SBS server successfully from the problematic client computer via server name and ip
    address. In the SBS 2011, can you access
    internet successfully? In addition, please select a client computer as a test machine, re-join it to the SBS network, then check if Security Status still report as Critical. Please also run Fix my network wizard in SBS console. Any find?
    Meanwhile, please refer to following article and check if can help you to
    repair Windows Server Update Services.
    Repair Windows Server Update Services
    By the way, did you have a good backup for the server?
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • SBS 2011 - Update Rollup 6 for Exchange Server 2010 Service Pack 2

    I wonder if I have to install this rollup, since the server is already up-to-date using Windows Update? The KB article (http://support.microsoft.com/kb/2746164/en-us) doesn't mention that.
    In this article, under 'Prerequisites' it says you have to "remove all interim updates". What updates are they?
    Simon

    Firstly, I will do an introduction of interim update.
    An interim update is a fix that resolves a problem that is considered critical to the functioning of Exchange. It is built specially for a particular service pack and Rollup. This means internally there could be loads of interim updates for a particular fix.
    If you have multiple problems on a server that requires interim builds, you cannot just add a second interim build. You can only install one interim update per server. You have to get a combined interim build that included both fixes. Currently MS supports
    up to 3 fixes in a combined IU. The good news is that interim builds can be seen in Add/Remove in the control panel so you do not end up checking file versions.
    See more details in the following link: http://blogs.technet.com/b/mlines/archive/2008/12/30/interim-updates.aspx
    That is to say, the interim update is different from Exchange Rollups
    You don't have to unstall anything to apply this Roll Up. Rollup Updates are always important and should be applied. If you are running SP2 for exchange 2010 and if their a rollup available to install for exchange , my suggestion woiuld be to install as it
    will keep your exchange server upto date.

  • A list of files changed for Update Rollup 4 for Exchange Server 2010 Service Pack 3

    Hi.
    Is there a list of files changed for Rollup 4?
    After our RollUp installation, some files in the BIN directory still has the date of 2/5/2013 (SP3, no RollUp4), some has the date of 6/13/2013 (RollUp4)
    Despite RollUp4 looks like to have been installed, Exchange Server still reports it's running "Version 14.3 (Build 123.4)"
    Thanks...

    Hi,
    After you install an update rollup for Exchange 2010, the version of Exchange Server isn't updated to show that the update rollup is installed. This issue occurs because the version number that is displayed by the Exchange Management Console or by other
    administrative mechanisms is obtained from the Exchange Server Object in Active Directory.
    If you want to get the latest version of Exchange server, the article Andy provided is a good way.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange server 2007 Service Pack problems SBS 2008

    I am Running Exchange server 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2 but it fails both windows update and manually. Can anyone first advise me what version I'm currently running?
    Help / about form Exchange Management Console displays:
    Version 08.01.0436.000
    And running repair on Exchange server from programs and features displays 2007 SP1 setup. So I believe SP2 to be next I have also ran SP3 but this fails.
    Here is the end lines from a log:
    [03/05/2014 08:54:13] [0] Setup will run the task 'uninstall-msipackage'
    [03/05/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [03/05/2014 08:54:13] [1] Beginning processing.
    [03/05/2014 08:54:13] [1] Property 'PackageName' is 'EXCHANGESERVER.msi'.
    [03/05/2014 08:54:13] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
    [03/05/2014 09:09:01] [1] [ERROR] Unexpected Error
    [03/05/2014 09:09:01] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is 'Could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.  
    Verify that you have sufficient access to that key, or contact your support personnel. '.
    [03/05/2014 09:09:01] [1] [ERROR] Fatal error during installation
    [03/05/2014 09:09:01] [1] Ending processing.
    [07/05/2014 19:45:17] [0] End of Setup
    There is a registry key to match this and The administrator account used for setup has access to it i believe??? What does this log mean?

    Hi,
    This error indicated that your account missed registry permissions on: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\ 7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613
    Please check whether you have permission. You can also check whether the key have permissions inherited from the Parent Key or not.
    After changing the permission, please run the setup again.
    Best Regards.

  • Decommissioning old Win2k3 DC impact on Exchange Server mail flow and client Outlook connection ?

    People,
    I'm going to decommission one of the three AD Domain Controllers / Global Catalog during the business hours that is used by the Exchange Server 2010 SP3 due to it is still running Win2k3 (Exchange Management Console > Server Configuration >
    Client Access | System Settings tab, I can see the three DC/GC as follows DC01-VM, DC02-VM, DC03-VM).
    So if one of the DC above in the tab is decommissioned during the business hours, is there any impact or steps that I need to take to avoid any email outage or problem ?
    Let me know what is the correct steps if possible.
    Thanks,
    /* Server Support Specialist */

    You may wish to remove the DC that is going to be decommissioned from the GCs available for use by Exchange.
    In any event that that is the GC that is being used by Exchange during the course of decommission, you will encounter issues.
    Blog: http://theinfraguys.com
    Follow me at Facebook
    The Infra Guys Facebook Page
    Please remember to click Mark as Answer on the answer if it helps you in anyway
    Hi Vincez,
    How do I do that on Exchange Server 2010 SP3 ?
    My understanding is that the DC/GC is detected and used by Exchange when it is on the same AD Site.
    /* Server Support Specialist */

  • Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

    Hi All
    We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
    Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
    What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
    Kind Regards
    Please note that I have previously posted this in another forum but was advised to post here in this forum.

    Hi,
    I find your post on Office forum:
    http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
    The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
    About "And are they dependent on the Office Service Pack?", I will give the answer.
    Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
    For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
    If you want to know more about the Exchange new features, please see Exchange Team Blog.
    Find blog about SP1 for your reference:
    http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Exchange server 2013 Installation issue

    Dear Experts,
    Thanks in advance...
    I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
    Dell Laptop Intel I5 1.7 GHZ
    RAM -8GB
    Vmware workstation 9.
    Steps I followed
    Created a VM inside Vmware and Installed windows 2012 Std. Edition
    Memory assigned to VM is 1 GB
    All prerequisites completed and tried to Install Exchange server 2013 SP1
    During installation it asked me to select the  role to Install and I selected Mailbox server role and CAS
    Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error  setup could not completed .
    Please find the logs for your reference.............
    04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
    [04/13/2015 08:41:02.0303] [0] **********************************************
    [04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
    [04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
    [04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
    [04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
    [04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
    [04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
    [04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
    [04/13/2015 08:41:13.0567] [0] Starting file's copying...
    [04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
    [04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
    [04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
    [04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
    [04/13/2015 08:42:55.0484] [0] File's copying finished.
    [04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
    [04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
    [04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable. 
    See the Exchange setup log for more information on this error.
    [04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
    [04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
    [04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
    [04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server 
    is not available. Error message: Active directory response: The LDAP server is unavailable.'.
    [04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
    [04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
    [04/13/2015 08:43:32.0739] [0] The following roles are installed:
    [04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
    [04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
    [04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
    [04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
    [04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
    [04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
    [04/13/2015 08:43:51.0536] [0] Applying default role selection state
    [04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
    [04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
    [04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
    [04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
    [04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
    [04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
    [04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
    [04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
    [04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
    [04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
    [04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
    [04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
    [04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
    [04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
    [04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
    [04/13/2015 08:46:30.0221] [0] Finished loading screen
    Regards
    Biswajeet

    Hi,
    Please find the DC Health check report.
    Microsoft Windows [Version 6.2.9200]
    (c) 2012 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = EX-13
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Connectivity
             ......................... EX-13 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\EX-13
          Starting test: Advertising
             ......................... EX-13 passed test Advertising
          Starting test: FrsEvent
             ......................... EX-13 passed test FrsEvent
          Starting test: DFSREvent
             ......................... EX-13 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... EX-13 passed test SysVolCheck
          Starting test: KccEvent
             ......................... EX-13 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... EX-13 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... EX-13 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... EX-13 passed test NCSecDesc
          Starting test: NetLogons
             ......................... EX-13 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... EX-13 passed test ObjectsReplicated
          Starting test: Replications
             ......................... EX-13 passed test Replications
          Starting test: RidManager
             ......................... EX-13 passed test RidManager
          Starting test: Services
             ......................... EX-13 passed test Services
          Starting test: SystemLog
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:37
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:01:49
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/14/2015   18:02:02
                Event String:
                DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
    ing any of the configured protocols; requested by PID      4e4 (C:\Windows\syste
    m32\dcdiag.exe).
             ......................... EX-13 failed test SystemLog
          Starting test: VerifyReferences
             ......................... EX-13 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : NETMAGIC
          Starting test: CheckSDRefDom
             ......................... NETMAGIC passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... NETMAGIC passed test CrossRefValidation
       Running enterprise tests on : NETMAGIC.IN
          Starting test: LocatorCheck
             ......................... NETMAGIC.IN passed test LocatorCheck
          Starting test: Intersite
             ......................... NETMAGIC.IN passed test Intersite
    Regards
    Biswajeet

Maybe you are looking for