Exchange server 2013 setup encounter error
anyone pls help me, i'm ready setup few time still facing same error.
Error:
The following error was generated when "$error.Clear();
if ($RoleCustomerFeedbackEnabled -ne $null)
$organizationConfig = get-OrganizationConfig;
if ($organizationConfig.CustomerFeedbackEnabled -ne $False)
Set-ExchangeServer -Identity $RoleFqdnOrName -CustomerFeedbackEnabled $RoleCustomerFeedbackEnabled;
" was run: "Property CustomerFeedbackEnabled can't be set on this object because it requires the object to have version 0.1 (8.0.535.0) or later. The object's current version is 0.0 (6.5.6500.0).".
Hi,
First, please make sure you have installed all the required prerequisites. For Exchange 2013 prerequisites, please refer to this
article.
Then please verify if there is a legacy server via ADSIEDIT. If there is a legacy object, please delete this legacy object. In registry editor, remove the watermark key and action key from the following path and then reinitiate the setup to check the result.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v15\HubTranportRole
If the issue persists, to narrow down the issue, I recommend you check the setup log for related error message.
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Similar Messages
-
Exchange Server 2013 setup / coexistance Exchange 2010
So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.
My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation. Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.
[06/12/2014 20:05:19.0860] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
[06/12/2014 20:05:19.0876] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
[06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
[06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
[06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
[06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
[06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
[06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
[06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
[06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
[06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
[06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
[06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
[06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
[06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
[06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
[06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[06/12/2014 20:05:44.0830] [0] Applying default role selection state
[06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
[06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.Hi,
Let's try the following resolutions:
1. Check if the discovery SearchMailbox is present on Exchange 2010 when you run the Exchange 2013 Install.
2. Reinstall your Exchange 2013 server:
Open ADSIEDIT, CN=Configuration, DC=your domain ->CN=Services ->CN=Microsoft Exchange ->CN=First Organization ->CN=Administrative Groups ->Cn=Exchange Administrative Group ->CN=Servers ->CN=Server name
After remove the exchange server, please reinstall your exchange server to test the result.
Thanks,
Angela Shi
TechNet Community Support -
Exchange Server 2013 Toolbox MMC Error ConsoleInitialize.ps1 not recognised
Hello, after installing and configuring Exchange 2013 during a migration from 2010 (with both versions still running), I am now receiving a ConsoleInitialize.ps1 System.Management.Automation.RemoteException exception when trying to run the Management Toolbox
(I am really after the Queue Viewer).
This is the same when trying to connect locally on the server and remotely on a client computer with Management Tools installed - I can use EMC without any errors locally or remotely.
I have tried various fixes found around the net, including:
Changing the Identity of the Classic and DefaultAppPools in IIS and resetting - from LocalSystem to ApplicationPoolIdentity
Adding the roles to Exchange Organisation Management in AD
Disabling SSL on the Powershell virtual Directory and setting auth to anonymous
I have not tried recreating the Powershell virtual directory as mentioned on a few sites, as I have not been able to test that in the lab, and I am not sure how it affects the powershell session that I am doing it from.
The only thing that I can think that could be an issue is that Ex2010 is still up and running, could it be that Management Tools is looking at the old server, instead of the new?
Can anyone point me in the right direction with this one?
I can post more info if required.
Thank you.
Xpost here: http://serverfault.com/questions/666054/exchange-server-2013-toolbox-mmc-error-consoleinitialize-ps1-not-recognisedHi,
If the EMS and EMC work properly, I think the powershell cannot be the problem. Is it possible to build up a new Exchange 2013 Server in test environment and make a replacement of
the ConsoleInitialize.ps1 file?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Upgrade Exchange server 2013 to CU7 error
Dear Microsoft Team
I have Exchange server 2013 SP1 and upgrade it to CU5 it is working normal
But wen I try to Upgrade it to CU7 I got this error massage
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Best Regards
Rawa ZanganaHi Rawa Zangana,
According to the error message, it seems that the Global Catalog not reachable from DC.
Please perform following steps.
1. Port 3268 listened on DC.
2. Enable Global Catalog role on all DCs.
3. Restart Exchange Server 2013 CU5.
4. Check whether Event 2080 found on all DCs, Event 2080 means that AD connectivity works fine.
5. Repeat CU7 installation.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Exchange Server 2013 CU3 Installation Error - Fresh Installation
Hi All,
I am trying to install Exchange 2013 CU3 on Windows Server 2012 Datacenter Edition. This is New Server Forest build.
Forest Function Level and Domain functional Level is Windows Server 2008 R2
As part of this Fresh installation, I have tried to install CAS Server Role first on the server.
I have full admin (Schema,Entp, Domain) Previliges and installed MS recomended pre-requesities successfully.
Set the Powershell Execution policy as unrestricted.
But, When i run setup file using GUI option. I am getting the below error. I would like to know whether this is ignorable for installation or how to fix the issue.
Error:
Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for
'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
Note: Server OS hardening policy has been applied in this server as per company security policy and Symantec A/V also installed in this server.
Regards
ManojHi,
Same Error for Mailbox Server also.
Stopped the Symantec AV Service and Tried. But result is same.
02/18/2014 06:39:06.0018] [0] Active Directory session settings for 'Get-OrganizationRelationship' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred
Domain Controllers: '{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:06.0050] [0] User specified parameters:
[02/18/2014 06:39:06.0050] [0] Beginning processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0157] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:07.0391] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:07.0469] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0610] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] Ending processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0766] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0015] [0] Active Directory session settings for 'Get-AcceptedDomain' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred Domain Controllers:
'{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:08.0015] [0] User specified parameters:
[02/18/2014 06:39:08.0015] [0] Beginning processing Get-AcceptedDomain
[02/18/2014 06:39:08.0078] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:08.0078] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:08.0140] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0202] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] Ending processing Get-AcceptedDomain
[02/18/2014 06:39:08.0327] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0327] [0] While running the On-Promises test, either Get-AcceptedDomains or Get-OrganizationRelationship return a null value.
[02/18/2014 06:39:08.0717] [0] Finished loading screen WelcomePage.
[02/18/2014 06:45:23.0242] [0] Finished loading screen EULAPage.
[02/18/2014 06:45:26.0908] [0] Finished loading screen RecommendedSettingsPage.
[02/18/2014 06:45:30.0012] [0] Setup is determining what organization-level operations to perform. -
Exchange server 2013 showing some error on event Log ( "DCOM" and "MSExchangeMapiMailboxAppPool" )
Error : DCOM was unable to communicate with the computer ADCB.ABCD.net using any of the configured protocols; requested by PID 2bec (c:\windows\system32\inetsrv\w3wp.exe).
Error: A process serving application pool 'MSExchangeMapiMailboxAppPool' suffered a fatal communication error with the Windows Process Activation Service. The process id was '2412'. The data field contains the error number.
Please suggestHi Parvez,
According to the error message, I understand that the Event error 10009 is received on DC. Please correct me if there is any misunderstand.
To solve this issue, please follow the steps below:
a. Please ensure that the remote computer is online.
b. This problem maybe the result of a firewall blocking the connection.
c. Other reasons for the problem might be found in the Extended RPC error information that is available in Event Viewer.
More details in the following article:
Event ID 10009 — COM Remote Service Availability
http://technet.microsoft.com/en-us/library/cc774368(WS.10).aspx
If the Remote server contains some 32 bit Applications, please make sure that each Application Pool in IIS, under "Advanced Settings" has "Enable 32 bit Application" set to "True".
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Installation error for Exchange Server-2013
I am trying to install exchange server-2013 on my Windows server-2012
machine. I have configured per-requisite applications and develop the server environment with active directory roles.
At my readiness check option, it shows the following error:-
"An unsupported operating system was detected . Exchange server-2013 client access and mailbox server roles support windows server -2008R2 SP1 or later and windows server-2012".
I am not using any V-machine or option. So how do i resolve the issue to install the Exchange server-2013? Please help me.
Regard
Azad
Azadur Sarker 6, Seaford street Stoke-on-Trent, ST4 2EUHi I found after promoting the exchange server as a Domain controller re-installing AD prep and running extending Schema completed successfully , I'm now able to get rid of exchange cmdlet logs event id and can successfully see and connect through the
exchange 2013 management shell
"Get-Exchangeserver"
However still not able to connect to https://localhost/eac and when i re-run setup
01-28-2014 21:10:16.0804] [0] Starting Microsoft Exchange Server 2013 Setup
[01-28-2014 21:10:16.0804] [0] **********************************************
[01-28-2014 21:10:16.0804] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[01-28-2014 21:10:16.0804] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[01-28-2014 21:10:16.0804] [0] Setup version: 15.0.516.32.
[01-28-2014 21:10:16.0804] [0] Logged on user: TESTLAB\Administrator.
[01-28-2014 21:10:16.0867] [0] Command Line Parameter Name='sourcedir', Value='D:\'.
[01-28-2014 21:10:16.0867] [0] Command Line Parameter Name='mode', Value='Install'.
[01-28-2014 21:10:16.0882] [0] RuntimeAssembly was started with the following command: '/sourcedir:D: /mode:Install'.
[01-28-2014 21:10:17.0085] [0] The following roles are installed: BridgeheadRole AdminToolsRole
[01-28-2014 21:10:17.0726] [0] Setup is choosing the domain controller to use
[01-28-2014 21:10:17.0820] [0] The MSExchangeADTopology has a persisted domain controller: Exch2013.Testlab.labyyz.testnet.rim.net
[01-28-2014 21:10:18.0023] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use Exch2013.Testlab.labyyz.testnet.rim.net
[01-28-2014 21:10:18.0023] [0] Setup is choosing a global catalog...
[01-28-2014 21:10:18.0023] [0] Setup has chosen the global catalog server Exch2013.Testlab.labyyz.testnet.rim.net.
[01-28-2014 21:10:18.0023] [0] Setup will use the domain controller 'Exch2013.Testlab.labyyz.testnet.rim.net'.
[01-28-2014 21:10:18.0023] [0] Setup will use the global catalog 'Exch2013.Testlab.labyyz.testnet.rim.net'.
[01-28-2014 21:10:18.0023] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0038] [0] Exchange organization container for the organization is 'CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0054] [0] Setup will search for an Exchange Server object for the local machine with name 'EXCH2013'.
[01-28-2014 21:10:18.0210] [0] Exchange Server object found : 'CN=EXCH2013,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0210] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[01-28-2014 21:10:18.0210] [0] The following datacenter roles are unpacked:
[01-28-2014 21:10:18.0210] [0] The following roles are installed: BridgeheadRole AdminToolsRole
[01-28-2014 21:10:18.0210] [0] The local server has some Exchange files installed.
[01-28-2014 21:10:18.0226] [0] Server Name=EXCH2013
[01-28-2014 21:10:18.0242] [0] Setup will use the path 'D:\' for installing Exchange.
[01-28-2014 21:10:18.0257] [0] Setup will discover the installed roles from server object 'CN=EXCH2013,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=TestLab,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Testlab,DC=labyyz,DC=testnet,DC=rim,DC=net'.
[01-28-2014 21:10:18.0257] [0] 'BridgeheadRole' is installed on the server object.
[01-28-2014 21:10:18.0257] [0] The installation mode is set to: 'Install'.
[01-28-2014 21:10:39.0632] [0] An Exchange organization with name 'TestLab' was found in this forest.
[01-28-2014 21:10:39.0632] [0] Active Directory Initialization status : 'True'.
[01-28-2014 21:10:39.0632] [0] Schema Update Required Status : 'False'.
[01-28-2014 21:10:39.0632] [0] Organization Configuration Update Required Status : 'False'.
[01-28-2014 21:10:39.0632] [0] Domain Configuration Update Required Status : 'False'.
[01-28-2014 21:10:39.0632] [0] The locally installed version is 15.0.516.32.
[01-28-2014 21:10:39.0632] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[01-28-2014 21:10:39.0664] [0] Applying default role selection state
[01-28-2014 21:10:39.0710] [0] Setup is determining what organization-level operations to perform.
[01-28-2014 21:10:39.0710] [0] Because the value was specified, setup is setting the argument OrganizationName to the value TestLab.
[01-28-2014 21:10:39.0710] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[01-28-2014 21:10:39.0710] [0] InstallModeDataHandler has 0 DataHandlers
[01-28-2014 21:10:39.0710] [0] RootDataHandler has 1 DataHandlers
[01-28-2014 21:10:40.0273] [0] Finished loading screen IncompleteInstallationDetectedPage.
[01-28-2014 21:11:08.0117] [0] Setup is determining what organization-level operations to perform.
[01-28-2014 21:11:08.0117] [0] Because the value was specified, setup is setting the argument OrganizationName to the value TestLab.
[01-28-2014 21:11:08.0117] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[01-28-2014 21:11:08.0117] [0] InstallModeDataHandler has 0 DataHandlers
[01-28-2014 21:11:08.0117] [0] RootDataHandler has 1 DataHandlers
[01-28-2014 21:11:08.0335] [0] Finished loading screen SetupProgressPage.
[01-28-2014 21:15:30.0513] [0] End of Setup
[01-28-2014 21:15:30.0513] [0] ********************************************** -
Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013
Hi all to every techies ....
I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated ,
The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER
Thank you all
Neil PatricHi,
To understand more about the issue, I’d like to confirm the detail error when the installation failed.
As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
2. Installing the Exchange Server 2013 pre-requisites on the server
3. Running Exchange Server 2013 setup
For more information, you can refer to the following article:
http://exchangeserverpro.com/how-to-install-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1
Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspxI think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}} -
Exchange Server 2013 Installation error
Hi Support,
I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>CD\
C:\>E:
E:\>cd pradeep\Ex Setup 2013
E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
erms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis FAILED
A reboot from a previous installation is pending. Please restart the system
and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.RebootPending.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
E:\pradeep\EX Setup 2013>Hi ,
Please have a look in to the error message
"A reboot from a previous installation is pending. Please restart the system
and then rerun Setup."
Reboot the server and try again .
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Exchange Server 2013 installation error at Step 10/15
I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
Windows Server 2012, have already install on it:
AD CD
DNS
IIS
Exchange 2013 Prerequisites for Win.Server 2012 like described here
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
And the (winner) error message is:
Exchange Server component Mailbox role: Client Access service failed.
Error: Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
I search online for a solution and I found many others with same problem but any solution yet. :(
If anyone can help me I am able to dedicate him my next ode.
Thank you,
AdrianI am experiencing the same problem except that mine is definitely NOT a domain controller. The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
"...Could not grant Network Service access to the certificate"
Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities. Granting rights to the certificate during the Setup process is the root of the problem.
Here is the complete error comment:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.". -
Exchange Server 2013 Missing file on ISO install Error Code 1603
Hi all, a mystery needs solving any suggestions much appreciated:
We are trying to install Exchange Server 2013 on Windows 2012 server.
The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
All preparation and requisites in place.
During Stage 2 Copying files, we receive an error code 1603 and installation halts.
The error states:
Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
Verify that the file exists and that you can access it.'.
We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
We have tried both Mailbox/Client Access and Mailbox only installations.
The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
Any ideas anyone, could we source a different ISO or copy of the file or ?????
Many thanks in advanceHad the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
a CSS and not as a TXT.)
I reran the install and it completed without issue. -
Trying to install Exchange Server 2013 and receive this error.
Hello,
I have a computer running Windows Server 2012 R2 Standard. I have completed all the prerequisites to install Exchange Server 2013. It all was going good until the install started. Then I received the below error. Does anyone have any suggestions? I am new
to Exchange Server so would thank and appreciate any help I could get to resolve this issue.
Thank You,
Stan
Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
" was run: "Microsoft.Exchange.Management.Tasks.InvalidWKObjectException: The well-known object entry B:32:A7D2016C83F003458132789EEB127B84:CN=Exchange Servers\0ADEL:16cd035a-6201-492f-b85f-1e28cc9f9ee0,CN=Deleted Objects,DC=MULTIAXCNC,DC=local on
the otherWellKnownObjects attribute in the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=MULTIAXCNC,DC=local points to an invalid DN or a deleted object. Remove the entry, and then rerun the task.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription, GroupTypeFlags groupType, Boolean createAsRoleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".Here is the error I am getting and the last setup log I can find. Any help how to get past the error would be helpful.
Thank You,
Stan
Error
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.AddAccessRuleCryptographicException: Could not grant Network Service access to the certificate with thumbprint 845C42A131A8A73487400A91491182FB95B81612
because a cryptographic exception was thrown. ---> System.Security.Cryptography.CryptographicException: Access is denied.
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.CAPIAddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.AddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, String websiteName, Boolean requireSsl, ITopologyConfigurationSession dataSession, Server server,
List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Setup Log Below
# Default Install steps for ClientAccessRole.
# Programmatically generated on 7/5/2014 10:58:24 PM.
# Variable Declarations
$RoleAllRoles = 'BridgeheadRole,GatewayRole,ClientAccessRole,MailboxRole,UnifiedMessagingRole,FrontendTransportRole,AdminToolsRole,MonitoringRole,CentralAdminRole,CentralAdminDatabaseRole,CentralAdminFrontEndRole,LanguagePacksRole,CafeRole,FfoWebServiceRole,OSPRole'
$RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Bin'
$RoleCustomerFeedbackEnabled = $True
$RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Datacenter'
$RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDomainController = 'MULTIAX2012.MULTIAXCNC.local'
$RoleExternalCASServerDomain = $null
$RoleFqdnOrName = 'MULTIAX2012.MULTIAXCNC.local'
$RoleInstallationMode = 'Install'
$RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V15\'
$RoleInvocationID = '20140705-2258240578829153548'
$RoleIsAdminToolsRoleInstalled = $True
$RoleIsBridgeheadRoleInstalled = $True
$RoleIsDatacenter = $False
$RoleIsDatacenterDedicated = $False
$RoleIsFfo = $False
$RoleIsPartnerHosted = $False
$RoleLanguagePacksPath = 'C:\Exchange\'
$RoleLoggedOnUser = 'MULTIAXCNC\Administrator'
$RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Logging'
$RoleNetBIOSName = 'MULTIAX2012'
$RoleNoSelfSignedCertificates = $False
$RolePreviousVersion = $null
$RoleProductPlatform = 'amd64'
$RoleRoleName = 'ClientAccessRole'
$RoleRoles = 'BridgeheadRole,AdminToolsRole'
$RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
$RoleTargetVersion = '15.00.0913.022'
$RoleUpdatesDir = $null
# Component tasks
# Tasks for 'All Roles Common First' component
# [ID = AllRolesCommonFirst___3e69ba31a53e4c29a2d6bffcf78cc614, Wt = 5, isFatal = True] "Starting the WMI service."
7/5/2014 10:58:24 PM:
if (Get-Service winmgmt* | ?{ $_.Name -ieq "winmgmt" })
Set-Service winmgmt -StartupType Automatic
Start-SetupService -ServiceName winmgmt
# [ID = AllRolesCommonFirst___56139ce4432346ecb7936afae4c3a9cc, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
& $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoleName.Replace('Role','')
# [ID = AllRolesCommonFirst___edc23bc11a4e4119a6a4ee802ff1ea49, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
if ($RoleRoles)
& $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoles.Replace('Role','').Split(',')
# [ID = AllRolesCommonFirst___62f13a063b2846a5ab20765bb7a3fc51, Wt = 5, isFatal = True] "Starting the Remote Registry service."
7/5/2014 10:58:25 PM:Start-SetupService -ServiceName RemoteRegistry
# [ID = AllRolesCommonFirst___00573a17b6e34c26842a6646830d57fa, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:25 PM:Set-LocalPermissions
# [ID = AllRolesCommonFirst___77668249568048d3812fb7cdba08c58b, Wt = 1, isFatal = False] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF");
$mflFilePath = ($RoleInstallPath + "bin\en\Exchange.MFL");
compile-moffile -MofFilePath:$mofFilePath;
compile-moffile -MofFilePath:$mflFilePath;
# [ID = AllRolesCommonFirst___f557448f44964e5eaa5dba792a3c4f09, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCByPortRule)
# [ID = AllRolesCommonFirst___84a0f0e2c2f44db2b537e9696c26fc3e, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCEPMapByPortRule)
# Tasks for 'ClientAccess Permissions Configuration' component
# [ID = ClientAccessLocalPermissionsComponent___6246589bb8494a3580c22c26e18451d1, Wt = 1, isFatal = True] "Setting folder or registry permissions for the Mailbox role: Client Access service. "
7/5/2014 10:59:35 PM:Set-LocalPermissions -Feature:"ClientAccess"
# Tasks for 'Exchange 2003 Registry Configuration' component
# [ID = LegacyRegistryMarkersComponent___7d6dadc1069b42ac93eadd1143c04a1a, Wt = 1, isFatal = True] "Installing/Removing registry values used by Exchange 2003 components"
7/5/2014 11:00:01 PM:set-ExsetdataRegistryMarkers
# Tasks for 'Client Access Perf Counters' component
# [ID = ClientAccessPerfCountersComponent___deb99c54869843b68426390615283ab7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:01 PM:new-PerfCounters -DefinitionFileName OwaInstallSingleCounters.xml
# [ID = ClientAccessPerfCountersComponent___ca78563ec1f1468982d1a2e59c6001bd, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:15 PM:new-PerfCounters -DefinitionFileName EcpPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69a559428fb42029ca3261e795b216d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:21 PM:new-PerfCounters -DefinitionFileName RwsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___c335490f948a4b16b5e2d2ce5f1eb9e7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:26 PM:new-PerfCounters -DefinitionFileName InfoworkerAvailabilityPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5af856aa00ae485ca206c5cdd13e9128, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:31 PM:new-PerfCounters -DefinitionFileName InfoworkerSharingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___86121d1b951e43fb934f1f1d573362eb, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:35 PM:new-PerfCounters -DefinitionFileName ThrottlingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___ea5896b92c494834b1a93c4620fcaef4, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:42 PM:new-PerfCounters -DefinitionFileName MiddleTierStoragePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___dab6f03bdf5141efb7b017c3009fb9e6, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:48 PM:new-PerfCounters -DefinitionFileName ActiveManagerClientPerfmon.xml
# [ID = ClientAccessPerfCountersComponent___5471455db0ef4610bf68fe7ad9417e19, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:53 PM:new-PerfCounters -DefinitionFileName RmsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___81ad52cb2950483196b52371b4d992c8, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:58 PM:new-PerfCounters -DefinitionFileName InfoworkerMailTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___072bf6737f1c42a0a8847ce35cf8a0c7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:03 PM:new-PerfCounters -DefinitionFileName InfoworkerUserPhotosPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___50b64611f7444bb49d50e00c206d2c13, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:08 PM:new-PerfCounters -DefinitionFileName AirSyncCounters.xml
# [ID = ClientAccessPerfCountersComponent___f2620ff8c3754396a8ea7d77257e2895, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:14 PM:new-PerfCounters -DefinitionFileName ClientAccessRulesPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4ef0f16c017840a583ace9f062300207, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:19 PM:new-PerfCounters -DefinitionFileName Imap4Counters.xml
# [ID = ClientAccessPerfCountersComponent___135fb06dadd9403a83ceebb290638efe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:24 PM:new-PerfCounters -DefinitionFileName Pop3Counters.xml
# [ID = ClientAccessPerfCountersComponent___312e8d44e92b45e0809f9d3d5dc2cfc0, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:29 PM:new-PerfCounters -DefinitionFileName WsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3c333497697041cb854190ec31c17b18, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:48 PM:new-PerfCounters -DefinitionFileName UMClientAccessCounters.xml
# [ID = ClientAccessPerfCountersComponent___ba015b97cc0b4beba7b25b6cb297fcac, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:54 PM:new-PerfCounters -DefinitionFileName AutodiscoverPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3daffea50d5a4318aab4aa737e508146, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:59 PM:new-PerfCounters -DefinitionFileName OAuthCounters.xml
# [ID = ClientAccessPerfCountersComponent___c71073d7f1ab4c119af83efb513b3a9d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:04 PM:new-PerfCounters -DefinitionFileName InfoWorkerMessageTrackingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___abdaf0bf21f4473b88819ee85cada219, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:10 PM:new-PerfCounters -DefinitionFileName RpcClientAccessPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___9f160f3e42984edfa25b62424ebc05b5, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName RpcClientAccessServerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___e55cb179521a4dacbeaa588c6948cf14, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName AddressBookServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___064a7856cf7c4b0399c85cf4f3bc2f1c, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:20 PM:new-PerfCounters -DefinitionFileName RpcEntryPointsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___42325F33-A961-41FE-B6B5-5CFB3AA9820A, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:22 PM:new-PerfCounters -DefinitionFileName MapiHttpEmsmdbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4C04D747-3B5C-400A-980F-45504324EF42, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:28 PM:new-PerfCounters -DefinitionFileName MapiHttpNspiPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5ab36fffacd04975bb1bc681a214bf71, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:33 PM:new-PerfCounters -DefinitionFileName ThrottlingServiceClientPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6ca23933132d44b39d6586cb3f9f8f21, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:39 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6602c41b35254405bed412fab7d527fe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:44 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerMdbPerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___74e45a45ea8c449092a10929ae24ba4b, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:50 PM:new-PerfCounters -DefinitionFileName MlbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___a3bcb686add64cf296c8616d387d0323, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:55 PM:new-PerfCounters -DefinitionFileName MlbMultiInstancePerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___c00c15c4ef6f479b9f5deb852d8eda7d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:01 PM:new-PerfCounters -DefinitionFileName ProvisioningPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___fe1a2a7c828f4b57abc2e50dc09baddf, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:06 PM:new-PerfCounters -DefinitionFileName GalsyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___35D14CB8B01949818832943A391D77B9, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName BackSyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69599d235234effb6d2740f3c52f7e1, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName AdminAuditPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___09bd11b57f6445e890391a507262cf32, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName InfoworkerMultiMailboxSearchPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___324687361E1C473A834C22A66104679f, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName ProvisioningCachePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___98C36FFEC7944065889DB24067CFD3EE, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:21 PM:new-PerfCounters -DefinitionFileName OABRequestHandlerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___1F5A7B68C95B42568E02FAA15A05EF17, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:26 PM:new-PerfCounters -DefinitionFileName DlpPolicyTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___995DEA7A1AC5467C89939F5F8CE5F2AF, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:31 PM:new-PerfCounters -DefinitionFileName ConfigurationCachePerformanceCounters.xml
# Tasks for 'Client Access Configuration' component
# [ID = ClientAccessComponent___d5119205104847bcb275cb63b65160b6, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:35 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Owa\Bin\Microsoft.Exchange.Clients.Owa.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___954344d74d8849e9ae7123b91761ed9d, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:57 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Sync\Bin\Microsoft.Exchange.AirSyncHandler.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___6632d6c1d5054563942db4f180976238, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:01 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\AutoDiscover\Bin\Microsoft.Exchange.AutoDiscover.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___390b4ffddd484dcb9edc01dd725e020a, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:07 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\exchweb\ews\bin\Microsoft.Exchange.Services.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___178a10624c88445093855c4ede7e9b9c, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:
. "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";
Set-NtlmLoopbackCheck $false
# [ID = ClientAccessComponent___14a6761e144e428b93c62249acc814fe, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:install-ClientAccessIisWebServiceExtensions
# [ID = ClientAccessComponent___28fdfe8bec984e809cdeef6d4d59bf4e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:43 PM:
if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
restart-service MSExchangeServiceHost
# [ID = ClientAccessComponent___7816256880dc4be0baf5b005b2af8cd3, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if (get-service MSExchangeProtectedServiceHost* | where {$_.name -eq "MSExchangeProtectedServiceHost"})
restart-service MSExchangeProtectedServiceHost
# [ID = ClientAccessComponent___e95499b43bd1484dbc03098fb1b4e592, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:set-ExchangeServerRole -Identity $RoleFqdnOrName -IsClientAccessServer:$true -DomainController $RoleDomainController
# [ID = ClientAccessComponent___f4c48e196e374cf3af269b1cea0602c8, Wt = 1, isFatal = True] "Installing/Removing the WebReady Document Viewing service."
7/5/2014 11:04:45 PM:Install-TranscodingServiceEx
# [ID = ClientAccessComponent___f50fd59d231140eb9b2405bbed2b93d4, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if ($RoleIsDatacenter -eq $false)
uninstall-FBAService
# [ID = ClientAccessComponent___9fad9d51b3ec4ecdad567ab58e470be7, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if ($RoleIsDatacenter -eq $false)
stop-setupservice -ServiceName MSExchangeFBA
# [ID = ClientAccessComponent___1c7a7da2ab9d41bb8db75522ad28b9db, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
$tpath = "$env:SystemRoot\system32\inetsrv\microsoft.web.administration.dll";
add-type -Path $tpath;
$sm = new-object Microsoft.Web.Administration.ServerManager;
if ($sm.Sites["Exchange Back End"] -eq $null)
$ppath = "$env:SystemDrive\inetpub\wwwroot";
$s = $sm.Sites.Add("Exchange Back End","http", "*:81:", $ppath);
$s.ServerAutoStart = $true;
$sb =$s.Bindings;
$b = $sb.Add("*:444:","https");
$sm.CommitChanges();
# [ID = ClientAccessComponent___a5f211d837784aea931b9ba55c39996d, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
Get-ExchangeServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
# [ID = ClientAccessComponent__SetInstallPathInMrsAppConfig, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
Set-InstallPathInAppConfig -ConfigFileRelativePath "Bin" -ConfigFileName "MsExchangeMailboxReplication.exe.config"
# [ID = ClientAccessComponent___765cc444ba07411aa81d58397b0401fd, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if (!(get-service MSExchangeMailboxReplication* | where {$_.name -eq "MSExchangeMailboxReplication"}))
install-MailboxReplicationService
# [ID = ClientAccessComponent___151b722e327b42a69411df32afdbbcbb, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationFirewallRule)
# [ID = ClientAccessComponent___7d69bb94f08245589e49eb569c6d5f4f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
if (!(get-service MSExchangeMigrationWorkflow* | where {$_.name -eq "MSExchangeMigrationWorkflow"}))
install-MigrationWorkflowService
# [ID = ClientAccessComponent___95f051d9dc5941c4b6014181b6e5ce93, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeABRPCFirewallRule)
# [ID = ClientAccessComponent___959c2d6566984da6b8e0e3235c1c11c2, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangePOPBeByPortRule)
# [ID = ClientAccessComponent___29864e7462374fdb84fc75eec931d8e4, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeIMAP4BeFirewallRule)
# [ID = ClientAccessComponent___052e1b794d0641ada4d6d417061af2a8, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeOWAByPortRule)
# [ID = ClientAccessComponent___975efd8911fd41cca8b17462535d710e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationByPort)
# [ID = ClientAccessComponent___023036e43f004bda9f4f4e0b1e0d233f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Install-ResourceHealthActiveFlags
# [ID = ClientAccessComponent___3a51c2876e2c4643bc892d2665754228, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\PushNotifications\" -ConfigFileName web.config
# [ID = ClientAccessComponent___FCC16AC1FFED43518F8292DBE770C621, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\emsmdb\" -ConfigFileName web.config
# [ID = ClientAccessComponent___E9C71786D02E40CBB1403E2E1A4B0758, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\nspi\" -ConfigFileName web.config
# [ID = ClientAccessComponent___abcab6b91ac844848c58b4ee66fcbea6, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
."$RoleInstallPath\Scripts\Install-OutlookServiceVirtualDirectory.ps1";
# [ID = ClientAccessComponent___9D94915F-B12D-4579-93EE-36B6DF42CF4A, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
$MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
$MapiMailboxClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\emsmdb");
$clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiMailboxAppPool_CLRConfig.config");
Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiMailboxAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiMailboxClientAccessPath`" /applicationPool:MSExchangeMapiMailboxAppPool /path:`"/mapi/emsmdb`""
-IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___B551AAAC-0F36-428B-B1BB-3B9AFDC9EAEF, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:50 PM:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
$MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
$MapiAddressBookClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\nspi");
$clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiAddressBookAppPool_CLRConfig.config");
Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiAddressBookAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiAddressBookClientAccessPath`" /applicationPool:MSExchangeMapiAddressBookAppPool /path:`"/mapi/nspi`""
-IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___178FD1A31B5949A0B4A819E39311B1FD, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
$ExchangeLabsRegKey = 'HKLM:\SOFTWARE\Microsoft\ExchangeLabs'
$E4eCertificateDistinguishedNameRegValueName = 'E4eCertificateDistinguishedName'
if ($RoleDatacenterE4eCertificateDistinguishedName -ne $null)
New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eCertificateDistinguishedNameRegValueName -Value $RoleDatacenterE4eCertificateDistinguishedName -Force
Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. value: $RoleDatacenterE4eCertificateDistinguishedName"
else
Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. Value is null."
$E4eServiceUrlRegValueName = 'E4eServiceUrl'
if ($RoleDatacenterE4eServiceUrl -ne $null)
New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eServiceUrlRegValueName -Value $RoleDatacenterE4eServiceUrl -Force
Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. value: $RoleDatacenterE4eServiceUrl"
else
Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. Value is null."
# [ID = ClientAccessComponent___240c7e5d07f941cfbe69a692dc33a31a, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
."$RoleInstallPath\Scripts\ConfigureCafeResponseHeaders.ps1";
CreateCustomHeadersNodeForBackend 'autodiscover'
CreateCustomHeadersNodeForBackend 'ecp'
CreateCustomHeadersNodeForBackend 'ews'
CreateCustomHeadersNodeForBackend 'oab'
CreateCustomHeadersNodeForBackend 'owa'
CreateCustomHeadersNodeForBackend 'powershell'
CreateCustomHeadersNodeForBackend 'pushnotifications'
CreateCustomHeadersNodeForBackend 'rpcproxy'
CreateCustomHeadersNodeForBackend 'sync'
CreateCustomHeadersNodeForBackend 'mapi\emsmdb'
CreateCustomHeadersNodeForBackend 'mapi\nspi'
CreateCustomHeadersNodeForBackend 'outlookservice'
# [ID = ClientAccessComponent___75f8c93d15314369983d33ec0742e189, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:53 PM:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
# Tasks for 'POP/IMAP Backend Configuration' component
# [ID = PopImapBeComponent___d91be94d83bb4dc28e1fbdf7d94ca60e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:05 PM:
if (!(get-service MSExchangeIMAP4BE* | where {$_.name -eq "MSExchangeIMAP4BE"}))
install-Imap4BeService
# [ID = PopImapBeComponent___e2debc6ecabf457eb6f278096ad5102c, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
if (!(get-service MSExchangePOP3BE* | where {$_.name -eq "MSExchangePOP3BE"}))
install-Pop3BeService
# [ID = PopImapBeComponent___7ee4dbb3fe884d26bb3e060ac68061ee, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Pop3Service.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
$fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___9b86c2af9f364990aa196cb6e69905b6, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Pop3.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___01c604c08fd6402e9de6b3c45e3431c8, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Imap4Service.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
$fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___2528980001a444fcb7097d123e879728, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Imap4.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___bbfdc492aaf748298977cb9b98e00029, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Imap4Container -Name:"IMAP4" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___091c98cfe0f145189c0966717496795e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Pop3Container -Name:"POP3" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___42cb9f4ac2924c27b6ebf60b92a03628, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-ImapSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# [ID = PopImapBeComponent___181f5361a5df4e7ca009f21f26f8c0d5, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-PopSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# Tasks for 'ClientAccessExchangeCertificate' component
# [ID = ClientAccessExchangeCertificate___fb5e9028e669404d94dba90aace8c2f9, Wt = 1, isFatal = True] "Installing Client Access server certificates."
7/5/2014 11:05:07 PM:
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController -
Connecting to Exchange Server 2013 using IMAP command gives authenication error
Hello All,
My application (it is a C# code) connects to Microsoft exchange server 2013 using POP3 and IMAP, processes the emails, marks as read and move to particular folder if it is processed successfully else to an different folder. In this sometimes,
I am getting authentication failed error from IMAP however same mail is processed when it is executed next time. Few times it is processed with out error. I am not sure what is causing this issue.We are connecting to IMAP using tcpIMAP command.
This is the same application which we used with exchange server 2010 now we are upgrading to exchange server 2013. I have verified that the setting of exchange 2010 and 2013 are the same.
To verify the IMAP command I created a sample application using C# which will try to connect to IMAP service and log in to exchange server 2013; it fails to authenticate the user after connecting for few times and then it starts to authenticate
successfully then again fails for few times and then authenticates. I am not sure why this is happening.
Please suggest how can I resolve this.
Thank you, SanthaSince I've upgraded to Snow Leopard I've also moved from Entourage 2008 to Mail, iCal & Addressbook with the new Exchange support.
My company exchange server is Exchange 2007.
Mail works fine except the occasional Mail crash.
iCal worked fine the first two days and then it came with an error the it cannot connect to the Exchange server and asks me to type my email address again. Doesn't work so I need to put my exchange calendar in iCal in offline. But now there is no syncing with the Echange server.
This only occurs when I add a meeting request in iCal.
My Exchange administrator has reset my mailbox on the Exchange server.
This helped for about 4 hours. Now it's the same problem.
I have a feeling the when you setup your exchange account in Mail it uses different settings for Mail and iCal with the autoconfig.
Anybody has a solution? My Exchange admin cannot find any problems on his side. Do I need to make changes on my iCal client or do we need to wait for OS 10.6.1 ?
Maybe you are looking for
-
My HP Photosmart 5510 won't scan photos to file on my Mac running Yosemite
I keep getting an error message that the scan failed every time I try to scan a photo. I've downloaded the latest driver via the Apple App Store. I've restarted both computer and printer. Help! This question was solved. View Solution.
-
Video editing terminology, etc.
OK, so I'm learning FCE with Tom Wolsky's book which I cannot imagine doing without and I'm finding that this forum is teaching me a ton as well. However, I need to better understand terminology & technical aspects of video editing (codec, compressio
-
Hi, In telephone service process if business has to give the services material to the customer through Vendor for one year agrement. Then business collects receives from the customer as a service order & gives payment to Vendor through PO every month
-
Lotus Notes - Recertifying with new certifier on hierarchy move
Documentation says we should specify the old certifier on a hierarchy move and The move request will create a �Name Move Request� in the requests database and must be completed by the new certifier that represents the user's new organization. (Page 1
-
Officejet 4630 e-All-in-One scanner software mac os 10.6.8
Does Officejet 4630 e-All-in-One scanner software for Mac OS 10.6.8 exist and what is the URL to download, Thanks...