Exchange Server 2013 - Shared mailbox audit

Is shared mailbox auditing possible in exchange 2013? I want to see which users deleted/moved.. specific mails. I turned on mailbox auditing but when I want to access the data I receive:
There is no audit log of the mailbox associated with this user. The log is removed.

Hi Nick,
The
Mailbox audit logging is available in Exchange 2013. By using mailbox audit logging, you can log mailbox access by mailbox owners, delegates (including administrators with full access permissions to mailboxes), and administrators.
Please run the following command to check the Audit logging settings for the problematic user:
Get-Mailbox -Identity Shared1 | FL Identity,*Audit*
We can run the following command to enable and set Audit Logging for a mailbox:
Set-Mailbox -Identity Shared1 -AuditEnabled $True -AuditDelegate Update,Move,MoveToDeletedItems,SoftDelete,HardDelete,FolderBind,SendAs,SendOnBehalf,Create -AuditOwner Update,Move,MoveToDeletedItems,SoftDelete,HardDelete
Then we can do some operation in Shared mailbox, and use the
Search-MailboxAuditLog cmdlet to synchronously search mailbox audit log entries for a single mailbox. Additionally, we can use the
Auditing tab in the EAC to run a non-owner mailbox access report or export entries from the mailbox audit log.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Exchange server 2013 supported mailbox databases and public folder databases

I want to know about Exchange server 2013 SP1 Standard and Enterprise version support how many Mailbox databases and Public folder Databases? Total Mailbox and Public folder databases supported information.
I Know as below but not clear:
1) Exchange server 2013 SP1 Sandard edition support 5 Databases, It's include Public folder databases, total=5 or 5 mailbox databases+5 public folder databases=10 databases
2) Exchange server 2013 SP1 Enterprise edition support 100 Databases, It's include Public folder databases, total=100 or 100 mailbox databases+100 public folder databases=200 databases
kindly let me know. Thanks.
Babu

Hi Babu,
Please check this link too.
http://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspxhttp://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspx
Thanks & Regards S.Nithyanandham

Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2

Hi Team,
Need urgent help in resolution of following error:
Environment Details: VMware ESXi 5.5 (vMotion)
Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
Prerequisites: Installed
Error: Installation gives Error at Step 10 during installation of Mailbox Service
Error Details Below:
Error:
The following error was generated when "$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
$WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
if ((get-service wsbexchange).Status -eq "Running")
Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
Exchange /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
" was run: "Process execution failed with exit code 1.".

Resolved ! :)
Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
Thanks to all.

Best practice on mailbox database size & we need how many server for deployment exchange server 2013

Dear all,
We have an server that runs Microsoft exchange server 2007 with the following specification:
4 servers: Hub&CAS1 & Hub&CAS2 & Mailbox1 & Mailbox2
Operating System : Microsoft Windows Server 2003 R2 Enterprise x64
6 mailbox databases
1500 Mailboxes
We need to upgrade our exchange server from 2007 to 2013 to fulfill the following requirment:
I want to upgrade the exchange server 2007 to exchange server 2013 and implement the following details:
1500 mailboxes
10GB or 15GB mailbox quota for each user
How many
servers and databases are
required for this migration<ins cite="mailto:Mohammad%20Ashouri" datetime="2014-05-18T22:41"></ins>?
Number of the servers:
Number of the databases:
Size of each database:
Many thanks.

You will also need to check server role requirement in exchange 2013. Please go through this link to calculate the server role requirement : http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
2TB is recommended maximum database size for Exchange 2013 databases.
Here is the complete checklist to upgrade from exchange 2007 to 2013 : http://technet.microsoft.com/en-us/library/ff805032%28v=exchg.150%29.aspx
Meanwhile, to reduce the risks and time consumed during the completion of migration process, you can have a look at this proficient application(http://www.exchangemigrationtool.com/) that would also be
a good approach for 1500 users. It will help you to ensure the data security during the migration between exchange 2007 and 2013.

Exchange Server 2013: incoming messages are not delivered into user mailboxes occasionally

Exchange Server 2013 CU1, two mailbox servers (DAG, only one mail database), two CAS servers (NLB cluster). Two Sendmail/CentOS-based SMTP relays route mail between Exchange servers and Internet (incoming mail is routed to NLB cluster name).
Usually mail flow is OK: messages are sent and received normally. However, I've got several complains from different users. They state that occasionally they don't receive messages that were sent to them from outside. Tomorrow morning I've decided to
investigate the issue.
So, we have a message sent from Gmail account that was not delivered in user mailbox. It was received and routed to Exchange by Sendmail host:
Jun 27 22:06:37 MX01 sendmail[12169]: r5RG6HC8012166: to=<USER_ADDRESS>, delay=00:00:19, xdelay=00:00:19, mailer=smtp, pri=124702, relay=NLB-FQDN [NLB-IP], dsn=2.0.0, stat=Sent (<CAHgK_sjEkj41htuVsutMP3XhgR5RRDs8-EgSC-UfHoaiHWFj=A@mail.gmail.com>
[InternalId=13069585481819] Queued mail for delivery)
Running Get-MessageTrackingLog applet on the mailbox servers displayed the followed log entries for the message:
DB Server #1:
    22:11:18 HAREDIRECT
    22:11:18 RECEIVE
    22:11:18 AGENTINFO
DB Server #2:
    22:11:18 HARECEIVE
    22:12:44 HADISCARD
So, we can see that the message was placed into shadow queues, but was NOT delivered into mailbox (no DELIVER status entries). Also pay attention to the timing. Time on all the servers is in sync, but Sendmail timestamp is 22:06, and Exchange timestamps
are 5 minutes behind it.
Today a message sent to the same address from the same Google mailbox was received by Exchange and placed into user mailbox with no glitches.
We use Exchange antispam system activated on Exchange mailbox servers. Spam is never dropped silently. It is either returned to sender (SCL 9) or placed into quarantine mailbox (SCL 6 and above). I'm pretty sure that the lost message was not in the quarantine
mailbox this morning, and the sender didn't receive any NDRs.
Any ideas what to investigate next?

Hi,
Do you mean the emails are placed in the Shadow Redundancy queue?
Shadow Redundancy
http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

How to get list of Users[MailBoxes] in Exchange Server 2013 by using EWS Managed API

Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users login name.
I was created Full Access permissions of all users to Admin user account, to access each user Mailbox programatically
i need the list of Mailboxes in exchange server .
MailBox mailbox = new MailBox("user");
Please share your ideas

Hi,
We can run the following command in Exchange Management Shell to get all user mailboxes name and export it to a .csv file:
Get-Mailbox -ResultSize Unlimited | Select Name,Alias,RecipientTypeDetails | Export-Csv c:\Users.csv
If you want to retrieve the list of users by using EWS Managed API, I suggest you can ask a question in Exchange Development forum for more suggestion:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
Regards,
Winnie Liang
TechNet Community Support

Exchange Server 2013 to 2010 mailbox proxy is not working

I have exchange server 2013 and exchange server 2010 in co-exist. I have 3 cas server and 3 mbx server 2013 on windows server 2012 standard, 2 hub/cas server and 2 mbx server 2010 on windows server 2008 r2. when I try to access owa of exchange server 2010
mailbox using exchange 2013 url, I am getting the error as "something went wrong. sorry, we can't get that information right now, please try again later. If the problem continues please contact your helpdesk"
Vishal C. Kalal | MCITP: Exchange 2010-2007 | Windows Server 2008

Hi,
To narrow down the cause, I recommend the following troubleshooting:
Check if the issue happens on all users.
Try to directly login OWA 2010 and check if it works well.
Check the IIS log on CAS 2013 server and find the error related to OWA.
Thanks,
Angela Shi
TechNet Community Support

Recover mailbox from Exchange server 2010 information store to exchange server 2013

I have a big issue. I have a correct exchange server 2010 where the active directory is corrupt but the information store is good.
I would like to recover a couple of mailboxes to an exchange server 2013.
Can anyone give me a detailed walk through of how I can accomplish this?
Thank in advance

Well if your AD is messed up that leaves you in a jam for sure because;
1. Database portability ONLY works within the same organization, so you cannot just install a new 2010 server in a completely different forest and then move the DB in hopes that DB portability will work.
2. As Ed said you should build a new Exchange 2010 server and use portability but it has to be in the same organization.
3. Here is a good article on how to accomplish
http://exchangeserverpro.com/exchange-2010-database-portability-disaster-recovery/
4. Now if you by chance have an AD backup before it went south you could build a separate network with same names etc just keep it isolated from the production server and then restore AD to that environment and you could then use DB portability.
That said if you don't have any other machines to work with then you are in a bit of a pickle and will have to use a 3rd party product to get to that data within the 2010 DB. We make a product that can do this (DigiScope), however if you don't
have any budget to handle its a non-issue.
The only other thing you could consider is to restore your AD from a previous point in time, however BE VERY CAREFUL if you consider this since it could cause more issues then you have now.
BTW if you AD is messed up, where are you putting this new 2013 server?
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Exchange Server 2013 Mailbox - High CPU Usage

Hi,
We are having an issue with our Exchange 2013 Mailbox Server.
The process Microsoft.Exchange.Store.Worker consumes most of the CPU utilization.
Have anyone encountered this issue? How were you able to resolve it?
Thanks

Hi,
According to your description, your database is not active. And to understand more about the issue, I’d like to confirm if there is some user experience slow connection or other performance issue.
However, since in Exchange 2013 single Store Worker Process is only responsible for one database, we can firstly confirm if the specific mailbox database causes the high CPU:
http://msexchangeteam.in/how-to-identify-which-microsoft-exchange-store-worker-process-is-owned-by-mailbox-database-in-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Copy emails (entire mailbox) to another exchange server 2013

Hi,
We are a hosted Exchange server 2013 solution provider, and we want to migrate customer mailboxes (from exchange 2007, 2010) to Exchange 2013 using some API, as we have a web portal for other admin tasks too. Someone told us that we can use EWS Managed API
for this purpose.
Is there any article in this regard, which can help us?
Or, is there any other API which we can use?
Thanks in anticipation.
Regards, David Johnson

Hi,
Glen thanks a lot for your reply. You are always a great help.
We are currently exporting\importing using powershell manually, but there are some difficulties in automating it using a web based app, as we don't want our customers to do any manual changes, while also, from our server, we cannot execute powershell commands
on remote Exchange 2007 servers.
Automating Cross forest migration is also very diificult, as you know that it has many steps, which are hard to automate, and also there is no api for MRS, as we know.
We have seen some migration utilities doing migration using EWS API, like CodeTwo, and also Transend
Migrator. Can you please tell, if you know, how they are doing it.
Thanks.
Regards, David Johnson

Migrate Exchange Server 2010 Public Folder shared calendars to Exchange Server 2013

Dear All,
I have an question about calendars under public folder migrating to new exchange server 2013. When completed the PF migration progress, will it also migrate calendars under sub-folder under PF to new PF mailbox?
For example: in exchange 2010 PF:
In exchange 2013
\Public Folder\sales\A1_calendar
--->
\ Public Folder\sales\A2_calendar
---> ?
\Public Folder\sales\A3_calendar
---> ?
\Public Folder\sales\A4_calendar
---> ?
Thanks in advance.
Regards,
Willis Wong

Hi Willis,
This forum is for general questions and feedback related to Outlook. Since your question is more related to Exchange server, I'd recommend you post a new question in the Exchange forum for further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can i get newly added contacts for a Mailbox User in Exchange Server 2013

Hi all,
I need to synchronize contacts in Exchange Server and Sugar CRM Application, for that
i need to get newly added contacts for a User in Exchange Server 2013 by using EWS Managed API.
I know how get the list of all contacts for a particular user , but in the list how i can find
new contacts ?

Hi Dora,
that's the fun thing:
You add your own property (and it'll be invisible to outlook users, not to worry).
Extended Properties allow you to define custom property on Exchange Items. And it has a
method for setting those too.
Here's a short post doing a very simple intro on using Extended Properties.
Glen's Exchange Blog is a generally useful resource when working with EWS, I'm confident you'll be able to find lots of tips there as well.
Cheers,
Fred
There's no place like 127.0.0.1

Get list of User Mailboxes in Exchange server 2013 by using EWS managed API

Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users log in name.
i know the command in Powershell to get list, but i need this using code[ ews managed API].
How can i achieve this ?
Please share your ideas

Hi Glen,
i follow your suggested links i wrote below code ,
here i am getting error
The term 'Get-Users' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
SecureString password = new SecureString();
string str_password = "EIS2014!@#";
string username = "[email protected]";
foreach (char x in str_password) { password.AppendChar(x); }
PSCredential credential = new PSCredential(username, password);
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://ExchangeServer.admin.com/powershell"), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", credential);
//connectionInfo.AuthenticationMechanism = AuthenticationMechanism.Basic;
Runspace runspace = RunspaceFactory.CreateRunspace(connectionInfo);
PowerShell powershell = PowerShell.Create();
PSCommand command = new PSCommand();
command.AddCommand("Get-Users");
command.AddParameter("ResultSize", 50);
powershell.Commands = command;
runspace.Open();
powershell.Runspace = runspace;
var aa = powershell.Invoke();
Please help me.

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

Exchange Server 2013 SP1 Standard: Installation failing can't progress

I'm trying to install Exchange Server 2013 and I keep getting this error and I am unable to progress, I can't find any support on the issue and frankly I don't want to/can't afford to spend $500 to ask Microsoft for technical support (what kind of racket
do they think they're running?).
The error message:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
Yet, I see no PushNotifications virtual directory or anything remotely related to that on IIS or in the inetpub folders and files. If I try to resume the set-up after this error I get:
Error:
The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The AD configuration for virtual directory 'PushNotifications' already exists in 'CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local', please remove this AD configuration manually.
Parameter name: VirtualDirectoryName".
And I have to remove this config using ADSI Edit, which just returns me to the first error.

1. Prodution
2. Just 1 DC for 1 site.
3. Setup.EXE
4. Matches SP1 version numbers
5. That's just what was made available to me via MSPP, the installer doesn't see any updates?
6. Here is the log files:
[03/23/2015 22:06:52.0940] [1] Setup failed previously while performing the action Install. Looking for the failed task with ID ClientAccessComponent___75f8c93d15314369983d33ec0742e189.
[03/23/2015 22:06:52.0941] [1] 131 tasks were found to run.
[03/23/2015 22:06:52.0941] [1] Processing component 'Client Access Configuration' (Configuring Mailbox role: Client Access service.).
[03/23/2015 22:06:52.0941] [1] Executing:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
[03/23/2015 22:06:52.0955] [2] Active Directory session settings for 'New-PushNotificationsVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'SVR01.OFFICE.local', Preferred Global Catalog: 'SVR01.OFFICE.local', Preferred Domain Controllers: '{ SVR01.OFFICE.local }'
[03/23/2015 22:06:52.0956] [2] User specified parameters: -Role:'Mailbox' -DomainController:'SVR01.OFFICE.local'
[03/23/2015 22:06:52.0956] [2] Beginning processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:52.0999] [2] Searching objects "SVR02.OFFICE.local" of type "Server" under the root "$null".
[03/23/2015 22:06:53.0066] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:53.0068] [2] Processing object "SVR02\PushNotifications".
[03/23/2015 22:06:56.0763] [2] The properties changed on the object '' (CN=PushNotifications (Exchange Back End),CN=HTTP,CN=Protocols,CN=SVR02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=OFFICE,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=OFFICE,DC=local) are: "{ MetabasePath[msExchMetabasePath]='IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications', AuthenticationMethodFlags[msExchInternalAuthenticationMethods]='Ntlm, WindowsIntegrated', AuthenticationMethodFlags[msExchExternalAuthenticationMethods]='Ntlm, WindowsIntegrated', Id[distinguishedName]='SVR02\PushNotifications (Exchange Back End)', InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ 'Ntlm', 'WindowsIntegrated' }, OrganizationId[msExchOURoot, msExchCU]='' }".
[03/23/2015 22:06:56.0764] [2] Saving object "SVR02\PushNotifications (Exchange Back End)" of type "ADPushNotificationsVirtualDirectory" and state "New".
[03/23/2015 22:06:57.0073] [2] Previous operation run on domain controller 'SVR01.OFFICE.local'.
[03/23/2015 22:06:57.0587] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:57.0591] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0378] [2] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0378] [2] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0386] [2] Ending processing New-PushNotificationsVirtualDirectory
[03/23/2015 22:06:58.0388] [1] The following 1 error(s) occurred during task execution:
[03/23/2015 22:06:58.0388] [1] 0. ErrorRecord: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] 0. ErrorRecord: System.InvalidOperationException: The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it. ---> System.Runtime.InteropServices.COMException: Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
at Microsoft.Web.Administration.Interop.IAppHostAdminManager.GetAdminSection(String bstrSectionName, String bstrPath)
at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, String moduleName, String moduleType, ExchangeVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetLiveIdBasicAuthModule(Boolean EnableModule, Boolean isChildVDirApplication, ADExchangeServiceVirtualDirectory advdir)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServiceVirtualDirectory`1.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewPushNotificationsVirtualDirectory.InternalProcessComplete()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[03/23/2015 22:06:58.0389] [1] [ERROR] The following error was generated when "$error.Clear();
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
" was run: "The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.".
[03/23/2015 22:06:58.0389] [1] [ERROR] The Active Directory object for virtual directory 'IIS://SVR02.OFFICE.local/W3SVC/24/ROOT/PushNotifications' on 'SVR02' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create it.
[03/23/2015 22:06:58.0389] [1] [ERROR] Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.config
Line number: 630
Error: Can not log on locally to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PushNotifications as user OFFICE\Administrator with virtual directory password
[03/23/2015 22:06:58.0390] [1] [ERROR-REFERENCE] Id=ClientAccessComponent___75f8c93d15314369983d33ec0742e189 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03/23/2015 22:06:58.0390] [1] Setup is stopping now because of one or more critical errors.
[03/23/2015 22:06:58.0390] [1] Finished executing component tasks.
[03/23/2015 22:06:58.0406] [1] Ending processing Install-ClientAccessRole
It says it can not log on with the supplied details, but the account is an Administrator account with full privileges so I can't see why this would be the case.

Exchange Server 2013 - Shared mailbox audit

Similar Messages

Maybe you are looking for