Exchange Server 2013 Toolbox MMC Error ConsoleInitialize.ps1 not recognised
Hello, after installing and configuring Exchange 2013 during a migration from 2010 (with both versions still running), I am now receiving a ConsoleInitialize.ps1 System.Management.Automation.RemoteException exception when trying to run the Management Toolbox
(I am really after the Queue Viewer).
This is the same when trying to connect locally on the server and remotely on a client computer with Management Tools installed - I can use EMC without any errors locally or remotely.
I have tried various fixes found around the net, including:
Changing the Identity of the Classic and DefaultAppPools in IIS and resetting - from LocalSystem to ApplicationPoolIdentity
Adding the roles to Exchange Organisation Management in AD
Disabling SSL on the Powershell virtual Directory and setting auth to anonymous
I have not tried recreating the Powershell virtual directory as mentioned on a few sites, as I have not been able to test that in the lab, and I am not sure how it affects the powershell session that I am doing it from.
The only thing that I can think that could be an issue is that Ex2010 is still up and running, could it be that Management Tools is looking at the old server, instead of the new?
Can anyone point me in the right direction with this one?
I can post more info if required.
Thank you.
Xpost here: http://serverfault.com/questions/666054/exchange-server-2013-toolbox-mmc-error-consoleinitialize-ps1-not-recognised
Hi,
If the EMS and EMC work properly, I think the powershell cannot be the problem. Is it possible to build up a new Exchange 2013 Server in test environment and make a replacement of
the ConsoleInitialize.ps1 file?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Similar Messages
-
Upgrade Exchange server 2013 to CU7 error
Dear Microsoft Team
I have Exchange server 2013 SP1 and upgrade it to CU5 it is working normal
But wen I try to Upgrade it to CU7 I got this error massage
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Best Regards
Rawa ZanganaHi Rawa Zangana,
According to the error message, it seems that the Global Catalog not reachable from DC.
Please perform following steps.
1. Port 3268 listened on DC.
2. Enable Global Catalog role on all DCs.
3. Restart Exchange Server 2013 CU5.
4. Check whether Event 2080 found on all DCs, Event 2080 means that AD connectivity works fine.
5. Repeat CU7 installation.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Exchange Server 2013 to 2010 mailbox proxy is not working
I have exchange server 2013 and exchange server 2010 in co-exist. I have 3 cas server and 3 mbx server 2013 on windows server 2012 standard, 2 hub/cas server and 2 mbx server 2010 on windows server 2008 r2. when I try to access owa of exchange server 2010
mailbox using exchange 2013 url, I am getting the error as "something went wrong. sorry, we can't get that information right now, please try again later. If the problem continues please contact your helpdesk"
Vishal C. Kalal | MCITP: Exchange 2010-2007 | Windows Server 2008Hi,
To narrow down the cause, I recommend the following troubleshooting:
Check if the issue happens on all users.
Try to directly login OWA 2010 and check if it works well.
Check the IIS log on CAS 2013 server and find the error related to OWA.
Thanks,
Angela Shi
TechNet Community Support -
Exchange Server 2013 CU3 Installation Error - Fresh Installation
Hi All,
I am trying to install Exchange 2013 CU3 on Windows Server 2012 Datacenter Edition. This is New Server Forest build.
Forest Function Level and Domain functional Level is Windows Server 2008 R2
As part of this Fresh installation, I have tried to install CAS Server Role first on the server.
I have full admin (Schema,Entp, Domain) Previliges and installed MS recomended pre-requesities successfully.
Set the Powershell Execution policy as unrestricted.
But, When i run setup file using GUI option. I am getting the below error. I would like to know whether this is ignorable for installation or how to fix the issue.
Error:
Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for
'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
Note: Server OS hardening policy has been applied in this server as per company security policy and Symantec A/V also installed in this server.
Regards
ManojHi,
Same Error for Mailbox Server also.
Stopped the Symantec AV Service and Tried. But result is same.
02/18/2014 06:39:06.0018] [0] Active Directory session settings for 'Get-OrganizationRelationship' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred
Domain Controllers: '{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:06.0050] [0] User specified parameters:
[02/18/2014 06:39:06.0050] [0] Beginning processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0157] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:07.0391] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:07.0469] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0610] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] Ending processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0766] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0015] [0] Active Directory session settings for 'Get-AcceptedDomain' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred Domain Controllers:
'{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:08.0015] [0] User specified parameters:
[02/18/2014 06:39:08.0015] [0] Beginning processing Get-AcceptedDomain
[02/18/2014 06:39:08.0078] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:08.0078] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:08.0140] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0202] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] Ending processing Get-AcceptedDomain
[02/18/2014 06:39:08.0327] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0327] [0] While running the On-Promises test, either Get-AcceptedDomains or Get-OrganizationRelationship return a null value.
[02/18/2014 06:39:08.0717] [0] Finished loading screen WelcomePage.
[02/18/2014 06:45:23.0242] [0] Finished loading screen EULAPage.
[02/18/2014 06:45:26.0908] [0] Finished loading screen RecommendedSettingsPage.
[02/18/2014 06:45:30.0012] [0] Setup is determining what organization-level operations to perform. -
Exchange server 2013 setup encounter error
anyone pls help me, i'm ready setup few time still facing same error.
Error:
The following error was generated when "$error.Clear();
if ($RoleCustomerFeedbackEnabled -ne $null)
$organizationConfig = get-OrganizationConfig;
if ($organizationConfig.CustomerFeedbackEnabled -ne $False)
Set-ExchangeServer -Identity $RoleFqdnOrName -CustomerFeedbackEnabled $RoleCustomerFeedbackEnabled;
" was run: "Property CustomerFeedbackEnabled can't be set on this object because it requires the object to have version 0.1 (8.0.535.0) or later. The object's current version is 0.0 (6.5.6500.0).".Hi,
First, please make sure you have installed all the required prerequisites. For Exchange 2013 prerequisites, please refer to this
article.
Then please verify if there is a legacy server via ADSIEDIT. If there is a legacy object, please delete this legacy object. In registry editor, remove the watermark key and action key from the following path and then reinitiate the setup to check the result.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v15\HubTranportRole
If the issue persists, to narrow down the issue, I recommend you check the setup log for related error message.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange server 2013 showing some error on event Log ( "DCOM" and "MSExchangeMapiMailboxAppPool" )
Error : DCOM was unable to communicate with the computer ADCB.ABCD.net using any of the configured protocols; requested by PID 2bec (c:\windows\system32\inetsrv\w3wp.exe).
Error: A process serving application pool 'MSExchangeMapiMailboxAppPool' suffered a fatal communication error with the Windows Process Activation Service. The process id was '2412'. The data field contains the error number.
Please suggestHi Parvez,
According to the error message, I understand that the Event error 10009 is received on DC. Please correct me if there is any misunderstand.
To solve this issue, please follow the steps below:
a. Please ensure that the remote computer is online.
b. This problem maybe the result of a firewall blocking the connection.
c. Other reasons for the problem might be found in the Extended RPC error information that is available in Event Viewer.
More details in the following article:
Event ID 10009 — COM Remote Service Availability
http://technet.microsoft.com/en-us/library/cc774368(WS.10).aspx
If the Remote server contains some 32 bit Applications, please make sure that each Application Pool in IIS, under "Advanced Settings" has "Enable 32 bit Application" set to "True".
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Writing client app to connect to Exchange Server 2013 and set OOF for users on vacation
I am coding an C# app that should connect to Exchange Server 2013 on-premise (Servers Location is not in our Company). I`ve got an account (User and Pass) with readonly admin-rights for now and want to read and set OutOfOffice Objects for other users. I
decide to use EWS Managed API over Autodiscovery but I am bit confuse how
I tried to connect with "service.UseDefaultCredentials = true" and read contacts -> this code works:
try
ExchangeService _service
= new ExchangeService(ExchangeVersion.Exchange2013_SP1);
_service.Credentials
= new WebCredentials("service.exchange",
"1234", "domain");
_service.TraceEnabled
= true;
_service.TraceFlags
= TraceFlags.All; _service.UseDefaultCredentials
= true;
_service.AutodiscoverUrl("[email protected]",
RedirectionUrlValidationCallback);
foreach
(Contact contact in _service.FindItems(WellKnownFolderName.Contacts,
new ItemView(2)))
var test = contact;
catch
(Exception exception)
Console.WriteLine(exception);
After that I tried the same with _service.UseDefaultCredentials = false; got error -> "The Autodiscover service couldn't be located." I am not shure if this "direct log on" is the right way, On msdn I've read about "delegate access"
and "Impersonation" (NTLM and Basic Authentication) I'am a bit confused. Can anybody help me?hi,
when you set a credential, you don't have to set the UseDefaultCredentials property (it is already updated).
For autodiscover, you should try to set the property EnableScpLookup to True if you are in the Exchange domain or it is known by the current domain.
Autodiscover uses a domain query (through Active Directory) and/or a dns query (this requires a DNS register for autodiscover.domain.net) to determine the access to the autodiscover service URI.
Regards,
Désiré GOVIN Refresh IT Solutions -
Trying to install Exchange Server 2013 and receive this error.
Hello,
I have a computer running Windows Server 2012 R2 Standard. I have completed all the prerequisites to install Exchange Server 2013. It all was going good until the install started. Then I received the below error. Does anyone have any suggestions? I am new
to Exchange Server so would thank and appreciate any help I could get to resolve this issue.
Thank You,
Stan
Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
" was run: "Microsoft.Exchange.Management.Tasks.InvalidWKObjectException: The well-known object entry B:32:A7D2016C83F003458132789EEB127B84:CN=Exchange Servers\0ADEL:16cd035a-6201-492f-b85f-1e28cc9f9ee0,CN=Deleted Objects,DC=MULTIAXCNC,DC=local on
the otherWellKnownObjects attribute in the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=MULTIAXCNC,DC=local points to an invalid DN or a deleted object. Remove the entry, and then rerun the task.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription, GroupTypeFlags groupType, Boolean createAsRoleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".Here is the error I am getting and the last setup log I can find. Any help how to get past the error would be helpful.
Thank You,
Stan
Error
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.AddAccessRuleCryptographicException: Could not grant Network Service access to the certificate with thumbprint 845C42A131A8A73487400A91491182FB95B81612
because a cryptographic exception was thrown. ---> System.Security.Cryptography.CryptographicException: Access is denied.
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.CAPIAddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.AddAccessRule(X509Certificate2 certificate, AccessRule rule)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, String websiteName, Boolean requireSsl, ITopologyConfigurationSession dataSession, Server server,
List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Setup Log Below
# Default Install steps for ClientAccessRole.
# Programmatically generated on 7/5/2014 10:58:24 PM.
# Variable Declarations
$RoleAllRoles = 'BridgeheadRole,GatewayRole,ClientAccessRole,MailboxRole,UnifiedMessagingRole,FrontendTransportRole,AdminToolsRole,MonitoringRole,CentralAdminRole,CentralAdminDatabaseRole,CentralAdminFrontEndRole,LanguagePacksRole,CafeRole,FfoWebServiceRole,OSPRole'
$RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Bin'
$RoleCustomerFeedbackEnabled = $True
$RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Datacenter'
$RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDomainController = 'MULTIAX2012.MULTIAXCNC.local'
$RoleExternalCASServerDomain = $null
$RoleFqdnOrName = 'MULTIAX2012.MULTIAXCNC.local'
$RoleInstallationMode = 'Install'
$RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V15\'
$RoleInvocationID = '20140705-2258240578829153548'
$RoleIsAdminToolsRoleInstalled = $True
$RoleIsBridgeheadRoleInstalled = $True
$RoleIsDatacenter = $False
$RoleIsDatacenterDedicated = $False
$RoleIsFfo = $False
$RoleIsPartnerHosted = $False
$RoleLanguagePacksPath = 'C:\Exchange\'
$RoleLoggedOnUser = 'MULTIAXCNC\Administrator'
$RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Logging'
$RoleNetBIOSName = 'MULTIAX2012'
$RoleNoSelfSignedCertificates = $False
$RolePreviousVersion = $null
$RoleProductPlatform = 'amd64'
$RoleRoleName = 'ClientAccessRole'
$RoleRoles = 'BridgeheadRole,AdminToolsRole'
$RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
$RoleTargetVersion = '15.00.0913.022'
$RoleUpdatesDir = $null
# Component tasks
# Tasks for 'All Roles Common First' component
# [ID = AllRolesCommonFirst___3e69ba31a53e4c29a2d6bffcf78cc614, Wt = 5, isFatal = True] "Starting the WMI service."
7/5/2014 10:58:24 PM:
if (Get-Service winmgmt* | ?{ $_.Name -ieq "winmgmt" })
Set-Service winmgmt -StartupType Automatic
Start-SetupService -ServiceName winmgmt
# [ID = AllRolesCommonFirst___56139ce4432346ecb7936afae4c3a9cc, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
& $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoleName.Replace('Role','')
# [ID = AllRolesCommonFirst___edc23bc11a4e4119a6a4ee802ff1ea49, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
if ($RoleRoles)
& $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoles.Replace('Role','').Split(',')
# [ID = AllRolesCommonFirst___62f13a063b2846a5ab20765bb7a3fc51, Wt = 5, isFatal = True] "Starting the Remote Registry service."
7/5/2014 10:58:25 PM:Start-SetupService -ServiceName RemoteRegistry
# [ID = AllRolesCommonFirst___00573a17b6e34c26842a6646830d57fa, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:25 PM:Set-LocalPermissions
# [ID = AllRolesCommonFirst___77668249568048d3812fb7cdba08c58b, Wt = 1, isFatal = False] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF");
$mflFilePath = ($RoleInstallPath + "bin\en\Exchange.MFL");
compile-moffile -MofFilePath:$mofFilePath;
compile-moffile -MofFilePath:$mflFilePath;
# [ID = AllRolesCommonFirst___f557448f44964e5eaa5dba792a3c4f09, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCByPortRule)
# [ID = AllRolesCommonFirst___84a0f0e2c2f44db2b537e9696c26fc3e, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCEPMapByPortRule)
# Tasks for 'ClientAccess Permissions Configuration' component
# [ID = ClientAccessLocalPermissionsComponent___6246589bb8494a3580c22c26e18451d1, Wt = 1, isFatal = True] "Setting folder or registry permissions for the Mailbox role: Client Access service. "
7/5/2014 10:59:35 PM:Set-LocalPermissions -Feature:"ClientAccess"
# Tasks for 'Exchange 2003 Registry Configuration' component
# [ID = LegacyRegistryMarkersComponent___7d6dadc1069b42ac93eadd1143c04a1a, Wt = 1, isFatal = True] "Installing/Removing registry values used by Exchange 2003 components"
7/5/2014 11:00:01 PM:set-ExsetdataRegistryMarkers
# Tasks for 'Client Access Perf Counters' component
# [ID = ClientAccessPerfCountersComponent___deb99c54869843b68426390615283ab7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:01 PM:new-PerfCounters -DefinitionFileName OwaInstallSingleCounters.xml
# [ID = ClientAccessPerfCountersComponent___ca78563ec1f1468982d1a2e59c6001bd, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:15 PM:new-PerfCounters -DefinitionFileName EcpPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69a559428fb42029ca3261e795b216d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:21 PM:new-PerfCounters -DefinitionFileName RwsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___c335490f948a4b16b5e2d2ce5f1eb9e7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:26 PM:new-PerfCounters -DefinitionFileName InfoworkerAvailabilityPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5af856aa00ae485ca206c5cdd13e9128, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:31 PM:new-PerfCounters -DefinitionFileName InfoworkerSharingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___86121d1b951e43fb934f1f1d573362eb, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:35 PM:new-PerfCounters -DefinitionFileName ThrottlingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___ea5896b92c494834b1a93c4620fcaef4, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:42 PM:new-PerfCounters -DefinitionFileName MiddleTierStoragePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___dab6f03bdf5141efb7b017c3009fb9e6, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:48 PM:new-PerfCounters -DefinitionFileName ActiveManagerClientPerfmon.xml
# [ID = ClientAccessPerfCountersComponent___5471455db0ef4610bf68fe7ad9417e19, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:53 PM:new-PerfCounters -DefinitionFileName RmsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___81ad52cb2950483196b52371b4d992c8, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:58 PM:new-PerfCounters -DefinitionFileName InfoworkerMailTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___072bf6737f1c42a0a8847ce35cf8a0c7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:03 PM:new-PerfCounters -DefinitionFileName InfoworkerUserPhotosPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___50b64611f7444bb49d50e00c206d2c13, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:08 PM:new-PerfCounters -DefinitionFileName AirSyncCounters.xml
# [ID = ClientAccessPerfCountersComponent___f2620ff8c3754396a8ea7d77257e2895, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:14 PM:new-PerfCounters -DefinitionFileName ClientAccessRulesPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4ef0f16c017840a583ace9f062300207, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:19 PM:new-PerfCounters -DefinitionFileName Imap4Counters.xml
# [ID = ClientAccessPerfCountersComponent___135fb06dadd9403a83ceebb290638efe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:24 PM:new-PerfCounters -DefinitionFileName Pop3Counters.xml
# [ID = ClientAccessPerfCountersComponent___312e8d44e92b45e0809f9d3d5dc2cfc0, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:29 PM:new-PerfCounters -DefinitionFileName WsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3c333497697041cb854190ec31c17b18, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:48 PM:new-PerfCounters -DefinitionFileName UMClientAccessCounters.xml
# [ID = ClientAccessPerfCountersComponent___ba015b97cc0b4beba7b25b6cb297fcac, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:54 PM:new-PerfCounters -DefinitionFileName AutodiscoverPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3daffea50d5a4318aab4aa737e508146, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:59 PM:new-PerfCounters -DefinitionFileName OAuthCounters.xml
# [ID = ClientAccessPerfCountersComponent___c71073d7f1ab4c119af83efb513b3a9d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:04 PM:new-PerfCounters -DefinitionFileName InfoWorkerMessageTrackingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___abdaf0bf21f4473b88819ee85cada219, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:10 PM:new-PerfCounters -DefinitionFileName RpcClientAccessPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___9f160f3e42984edfa25b62424ebc05b5, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName RpcClientAccessServerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___e55cb179521a4dacbeaa588c6948cf14, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName AddressBookServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___064a7856cf7c4b0399c85cf4f3bc2f1c, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:20 PM:new-PerfCounters -DefinitionFileName RpcEntryPointsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___42325F33-A961-41FE-B6B5-5CFB3AA9820A, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:22 PM:new-PerfCounters -DefinitionFileName MapiHttpEmsmdbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4C04D747-3B5C-400A-980F-45504324EF42, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:28 PM:new-PerfCounters -DefinitionFileName MapiHttpNspiPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5ab36fffacd04975bb1bc681a214bf71, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:33 PM:new-PerfCounters -DefinitionFileName ThrottlingServiceClientPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6ca23933132d44b39d6586cb3f9f8f21, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:39 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6602c41b35254405bed412fab7d527fe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:44 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerMdbPerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___74e45a45ea8c449092a10929ae24ba4b, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:50 PM:new-PerfCounters -DefinitionFileName MlbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___a3bcb686add64cf296c8616d387d0323, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:55 PM:new-PerfCounters -DefinitionFileName MlbMultiInstancePerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___c00c15c4ef6f479b9f5deb852d8eda7d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:01 PM:new-PerfCounters -DefinitionFileName ProvisioningPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___fe1a2a7c828f4b57abc2e50dc09baddf, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:06 PM:new-PerfCounters -DefinitionFileName GalsyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___35D14CB8B01949818832943A391D77B9, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName BackSyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69599d235234effb6d2740f3c52f7e1, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName AdminAuditPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___09bd11b57f6445e890391a507262cf32, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName InfoworkerMultiMailboxSearchPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___324687361E1C473A834C22A66104679f, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName ProvisioningCachePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___98C36FFEC7944065889DB24067CFD3EE, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:21 PM:new-PerfCounters -DefinitionFileName OABRequestHandlerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___1F5A7B68C95B42568E02FAA15A05EF17, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:26 PM:new-PerfCounters -DefinitionFileName DlpPolicyTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___995DEA7A1AC5467C89939F5F8CE5F2AF, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:31 PM:new-PerfCounters -DefinitionFileName ConfigurationCachePerformanceCounters.xml
# Tasks for 'Client Access Configuration' component
# [ID = ClientAccessComponent___d5119205104847bcb275cb63b65160b6, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:35 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Owa\Bin\Microsoft.Exchange.Clients.Owa.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___954344d74d8849e9ae7123b91761ed9d, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:57 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Sync\Bin\Microsoft.Exchange.AirSyncHandler.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___6632d6c1d5054563942db4f180976238, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:01 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\AutoDiscover\Bin\Microsoft.Exchange.AutoDiscover.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___390b4ffddd484dcb9edc01dd725e020a, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:07 PM:
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\exchweb\ews\bin\Microsoft.Exchange.Services.dll");
$appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___178a10624c88445093855c4ede7e9b9c, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:
. "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";
Set-NtlmLoopbackCheck $false
# [ID = ClientAccessComponent___14a6761e144e428b93c62249acc814fe, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:install-ClientAccessIisWebServiceExtensions
# [ID = ClientAccessComponent___28fdfe8bec984e809cdeef6d4d59bf4e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:43 PM:
if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
restart-service MSExchangeServiceHost
# [ID = ClientAccessComponent___7816256880dc4be0baf5b005b2af8cd3, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if (get-service MSExchangeProtectedServiceHost* | where {$_.name -eq "MSExchangeProtectedServiceHost"})
restart-service MSExchangeProtectedServiceHost
# [ID = ClientAccessComponent___e95499b43bd1484dbc03098fb1b4e592, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:set-ExchangeServerRole -Identity $RoleFqdnOrName -IsClientAccessServer:$true -DomainController $RoleDomainController
# [ID = ClientAccessComponent___f4c48e196e374cf3af269b1cea0602c8, Wt = 1, isFatal = True] "Installing/Removing the WebReady Document Viewing service."
7/5/2014 11:04:45 PM:Install-TranscodingServiceEx
# [ID = ClientAccessComponent___f50fd59d231140eb9b2405bbed2b93d4, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if ($RoleIsDatacenter -eq $false)
uninstall-FBAService
# [ID = ClientAccessComponent___9fad9d51b3ec4ecdad567ab58e470be7, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if ($RoleIsDatacenter -eq $false)
stop-setupservice -ServiceName MSExchangeFBA
# [ID = ClientAccessComponent___1c7a7da2ab9d41bb8db75522ad28b9db, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
$tpath = "$env:SystemRoot\system32\inetsrv\microsoft.web.administration.dll";
add-type -Path $tpath;
$sm = new-object Microsoft.Web.Administration.ServerManager;
if ($sm.Sites["Exchange Back End"] -eq $null)
$ppath = "$env:SystemDrive\inetpub\wwwroot";
$s = $sm.Sites.Add("Exchange Back End","http", "*:81:", $ppath);
$s.ServerAutoStart = $true;
$sb =$s.Bindings;
$b = $sb.Add("*:444:","https");
$sm.CommitChanges();
# [ID = ClientAccessComponent___a5f211d837784aea931b9ba55c39996d, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
Get-ExchangeServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
# [ID = ClientAccessComponent__SetInstallPathInMrsAppConfig, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
Set-InstallPathInAppConfig -ConfigFileRelativePath "Bin" -ConfigFileName "MsExchangeMailboxReplication.exe.config"
# [ID = ClientAccessComponent___765cc444ba07411aa81d58397b0401fd, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
if (!(get-service MSExchangeMailboxReplication* | where {$_.name -eq "MSExchangeMailboxReplication"}))
install-MailboxReplicationService
# [ID = ClientAccessComponent___151b722e327b42a69411df32afdbbcbb, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationFirewallRule)
# [ID = ClientAccessComponent___7d69bb94f08245589e49eb569c6d5f4f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
if (!(get-service MSExchangeMigrationWorkflow* | where {$_.name -eq "MSExchangeMigrationWorkflow"}))
install-MigrationWorkflowService
# [ID = ClientAccessComponent___95f051d9dc5941c4b6014181b6e5ce93, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeABRPCFirewallRule)
# [ID = ClientAccessComponent___959c2d6566984da6b8e0e3235c1c11c2, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangePOPBeByPortRule)
# [ID = ClientAccessComponent___29864e7462374fdb84fc75eec931d8e4, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeIMAP4BeFirewallRule)
# [ID = ClientAccessComponent___052e1b794d0641ada4d6d417061af2a8, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeOWAByPortRule)
# [ID = ClientAccessComponent___975efd8911fd41cca8b17462535d710e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationByPort)
# [ID = ClientAccessComponent___023036e43f004bda9f4f4e0b1e0d233f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
Install-ResourceHealthActiveFlags
# [ID = ClientAccessComponent___3a51c2876e2c4643bc892d2665754228, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\PushNotifications\" -ConfigFileName web.config
# [ID = ClientAccessComponent___FCC16AC1FFED43518F8292DBE770C621, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\emsmdb\" -ConfigFileName web.config
# [ID = ClientAccessComponent___E9C71786D02E40CBB1403E2E1A4B0758, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\nspi\" -ConfigFileName web.config
# [ID = ClientAccessComponent___abcab6b91ac844848c58b4ee66fcbea6, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
."$RoleInstallPath\Scripts\Install-OutlookServiceVirtualDirectory.ps1";
# [ID = ClientAccessComponent___9D94915F-B12D-4579-93EE-36B6DF42CF4A, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
$MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
$MapiMailboxClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\emsmdb");
$clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiMailboxAppPool_CLRConfig.config");
Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiMailboxAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiMailboxClientAccessPath`" /applicationPool:MSExchangeMapiMailboxAppPool /path:`"/mapi/emsmdb`""
-IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___B551AAAC-0F36-428B-B1BB-3B9AFDC9EAEF, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:50 PM:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
$MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
$MapiAddressBookClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\nspi");
$clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiAddressBookAppPool_CLRConfig.config");
Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiAddressBookAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiAddressBookClientAccessPath`" /applicationPool:MSExchangeMapiAddressBookAppPool /path:`"/mapi/nspi`""
-IgnoreExitCode @(183);
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___178FD1A31B5949A0B4A819E39311B1FD, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
$ExchangeLabsRegKey = 'HKLM:\SOFTWARE\Microsoft\ExchangeLabs'
$E4eCertificateDistinguishedNameRegValueName = 'E4eCertificateDistinguishedName'
if ($RoleDatacenterE4eCertificateDistinguishedName -ne $null)
New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eCertificateDistinguishedNameRegValueName -Value $RoleDatacenterE4eCertificateDistinguishedName -Force
Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. value: $RoleDatacenterE4eCertificateDistinguishedName"
else
Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. Value is null."
$E4eServiceUrlRegValueName = 'E4eServiceUrl'
if ($RoleDatacenterE4eServiceUrl -ne $null)
New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eServiceUrlRegValueName -Value $RoleDatacenterE4eServiceUrl -Force
Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. value: $RoleDatacenterE4eServiceUrl"
else
Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. Value is null."
# [ID = ClientAccessComponent___240c7e5d07f941cfbe69a692dc33a31a, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
."$RoleInstallPath\Scripts\ConfigureCafeResponseHeaders.ps1";
CreateCustomHeadersNodeForBackend 'autodiscover'
CreateCustomHeadersNodeForBackend 'ecp'
CreateCustomHeadersNodeForBackend 'ews'
CreateCustomHeadersNodeForBackend 'oab'
CreateCustomHeadersNodeForBackend 'owa'
CreateCustomHeadersNodeForBackend 'powershell'
CreateCustomHeadersNodeForBackend 'pushnotifications'
CreateCustomHeadersNodeForBackend 'rpcproxy'
CreateCustomHeadersNodeForBackend 'sync'
CreateCustomHeadersNodeForBackend 'mapi\emsmdb'
CreateCustomHeadersNodeForBackend 'mapi\nspi'
CreateCustomHeadersNodeForBackend 'outlookservice'
# [ID = ClientAccessComponent___75f8c93d15314369983d33ec0742e189, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:53 PM:
New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
# Tasks for 'POP/IMAP Backend Configuration' component
# [ID = PopImapBeComponent___d91be94d83bb4dc28e1fbdf7d94ca60e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:05 PM:
if (!(get-service MSExchangeIMAP4BE* | where {$_.name -eq "MSExchangeIMAP4BE"}))
install-Imap4BeService
# [ID = PopImapBeComponent___e2debc6ecabf457eb6f278096ad5102c, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
if (!(get-service MSExchangePOP3BE* | where {$_.name -eq "MSExchangePOP3BE"}))
install-Pop3BeService
# [ID = PopImapBeComponent___7ee4dbb3fe884d26bb3e060ac68061ee, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Pop3Service.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
$fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___9b86c2af9f364990aa196cb6e69905b6, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Pop3.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___01c604c08fd6402e9de6b3c45e3431c8, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Imap4Service.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
$fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___2528980001a444fcb7097d123e879728, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
$file = 'Microsoft.Exchange.Imap4.exe.config';
$template = $file + '.template';
$relPath = 'ClientAccess\PopImap';
$fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___bbfdc492aaf748298977cb9b98e00029, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Imap4Container -Name:"IMAP4" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___091c98cfe0f145189c0966717496795e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Pop3Container -Name:"POP3" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___42cb9f4ac2924c27b6ebf60b92a03628, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-ImapSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# [ID = PopImapBeComponent___181f5361a5df4e7ca009f21f26f8c0d5, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-PopSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# Tasks for 'ClientAccessExchangeCertificate' component
# [ID = ClientAccessExchangeCertificate___fb5e9028e669404d94dba90aace8c2f9, Wt = 1, isFatal = True] "Installing Client Access server certificates."
7/5/2014 11:05:07 PM:
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController -
Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2
Hi Team,
Need urgent help in resolution of following error:
Environment Details: VMware ESXi 5.5 (vMotion)
Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
Prerequisites: Installed
Error: Installation gives Error at Step 10 during installation of Mailbox Service
Error Details Below:
Error:
The following error was generated when "$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
$WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
if ((get-service wsbexchange).Status -eq "Running")
Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
Exchange /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
" was run: "Process execution failed with exit code 1.".Resolved ! :)
Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
Thanks to all. -
Exchange Server 2013 Client Mail are Return.Error is [0x80040305-0x0004de-0x00054a]
Hi,
We are using Exchange Server 2013.we have Outlook 2007 SP3 and 2010 SP2 client .Some clients inform mails are return.
Return massage
"This message could not be sent. Try sending the message again later, or contact your network administrator. Your server administrator has limited the number of items you can open simultaneously.
Try closing messages you have opened or removing attachments and images from unsent messages you are composing. Error is [0x80040305-0x0004de-0x00054a]"
Thanks,
Gayan1) Disable TCPChimney and RSS on CAS and Mailbox Servers by running below commands
netsh int tcp set global chimney=disabled
netsh int tcp set global rss=disabled
2) Disable unwanted Add-Ins in outlook that may open many sessions
3) If above steps doesnt resolve, you can delete existing outlook profile and create new Outlook online profile -
Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1
Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspxI think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}} -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
Exchange Server 2013 // MFCMAPI could connect with errors
While connecting with Exchange Server 2013 I have started facing problem with my application.
My application fails to connect to Exchange with below parameters, then i have tried using MFCMAPI to if everything is okay. MFCMAPI could connect with above errors.
And I have tried with program using below parameters, i still get network error from MAPI call. Can you kindly help, I can provide any additional
details needed.
___ props[prop_count].ulPropTag = PR_PROFILE_UNRESOLVED_NAME;
props[prop_count].Value.lpszA = <ProfileUnresolvedName>;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_UNRESOLVED_SERVER;
props[prop_count].Value.lpszA = <[email protected]>;
prop_count++;
// Setting this to TRUE causes OpenMsgStore() to fail with MAPI_E_UNCONFIGURED
props[prop_count].ulPropTag = PR_CONVERSION_PROHIBITED;
props[prop_count].Value.b = FALSE;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_CONFIG_FLAGS;
props[prop_count].Value.l = CONFIG_SERVICE /*| CONFIG_PROMPT_FOR_CREDENTIALS
| CONFIG_SHOW_CONNECT_UI */;
prop_count++;
props[prop_count].ulPropTag = PR_DISPLAY_NAME;
props[prop_count].Value.lpszA = <Mailbox Profile Name>;
prop_count++;
//Above setting used to be sufficient to connect using RPC
//Below parameters added to connect via HTTPS
LPSTR pwszUser = "domain\\username"; //also tried
[email protected] AND username
LPWSTR pwszPassword = L"paswword"; // Password has been encrypted using CryptProtectData
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_W;
props[prop_count].Value.lpszW = L"https://ProxyHostname.domain";
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_AUTH_PACKAGE;
props[prop_count].Value.l = RPC_C_AUTHN_NONE; // RPC_C_HTTP_AUTHN_SCHEME_NTLM,
RPC_C_HTTP_AUTHN_SCHEME_BASIC
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_FLAGS;
props[prop_count].Value.l = PRXF_ENABLED | PRXF_SSL;// | PRXF_IGNORE_SEC_WARNING; // | PRXF_IGNORE_SEC_WARNING;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_RPC_PROXY_SERVER_PRINCIPAL_W;
props[prop_count].Value.lpszW = L"msstd:certificateserverhostname.domain";
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_AUTH_PACKAGE;
props[prop_count].Value.l = RPC_C_AUTHN_GSS_NEGOTIATE;
// RPC_C_AUTHN_WINNT, RPC_C_AUTHN_GSS_NEGOTIATE, RPC_C_AUTHN_NONE
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_AUTH_USER_W;
props[prop_count].Value.lpszA = pwszUser;
prop_count++;
props[prop_count].ulPropTag = PR_PROFILE_AUTH_PASSWORD;
props[prop_count].Value.bin.lpb = dataBlobOut.pbData;
props[prop_count].Value.bin.cb = dataBlobOut.cbData;
prop_count++;
DB( (DB_PR _T("ConfigureExchangeService() About to configureMsgService\r\n"),
this ) );
hres = lpServiceAdmin->ConfigureMsgService( exchUID, 0, config_flags, prop_count, props
I still get MAPI_E_NETWORK not found
Are there any configuration changes need to be done on Exchange Server?
Is there any mistake in above parameters?
Kindly suggest.You can refer Dave's blog post @
http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx
DeVa, M.S., {MSFT} Please remember to mark the replies as answers if they help -
Exchange Server 2013 Installation error
Hi Support,
I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>CD\
C:\>E:
E:\>cd pradeep\Ex Setup 2013
E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
erms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis FAILED
A reboot from a previous installation is pending. Please restart the system
and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.RebootPending.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
E:\pradeep\EX Setup 2013>Hi ,
Please have a look in to the error message
"A reboot from a previous installation is pending. Please restart the system
and then rerun Setup."
Reboot the server and try again .
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Exchange Server 2013 installation error at Step 10/15
I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
Windows Server 2012, have already install on it:
AD CD
DNS
IIS
Exchange 2013 Prerequisites for Win.Server 2012 like described here
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
And the (winner) error message is:
Exchange Server component Mailbox role: Client Access service failed.
Error: Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
I search online for a solution and I found many others with same problem but any solution yet. :(
If anyone can help me I am able to dedicate him my next ode.
Thank you,
AdrianI am experiencing the same problem except that mine is definitely NOT a domain controller. The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
"...Could not grant Network Service access to the certificate"
Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities. Granting rights to the certificate during the Setup process is the root of the problem.
Here is the complete error comment:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
Install-AuthCertificate -DomainController $RoleDomainController
" was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.".
Maybe you are looking for
-
Hi Experts, I have a requirement to implement Inventory Aging report . The report should show total qty of inventory on hand in buckets of (0-30 days), (31-60 days) and so on upto a year for given plant and material . I also need to show value of inv
-
Comes With Music - Doesn't Work
Can anyone tell me how I can actually use the service I have paid for? Every time I try to join up, the Nokia Music Store application crashes. If I try and sign in to the Nokia Music Store with the phone connected, it crashes. The PC suite works fine
-
I have a c7280 all in one printer that i have had for many years and have never had a problem, but that changed today and i can't figure out what is wrong. I am hooked up to my wireless router network and can print from my PC and my laptop, and agai
-
What kind of data is transferred between R/3 to BW using XI.......could someone tell a example of this scenario....Thank you...
-
Messages using all my storage on 5s.
Getting a full storage message on my 5s. I was sure I needed to clean out my pictures, but its my messages. I tried deleting some old ones but that didn't budge it. The message app is using a massive amount of my storage. Any suggestions on how to fi