Exchange Server e-mail only works on 4G or 3G 1% of the time - problem started suddenly

I've been receiving Exchange Server (Outlook) e-mail on my DROID RAZR through 3G and 4G since I got the phone last November. All of a sudden, over this past weekend, I am unable to send/receive on that account using 4G/3G except very very sporadically (once or twice a day for a few seconds). GMail is noticeably slower but appears to work, at least better than the Outlook account.
Internet through the browser on the phone works perfectly fine. However, I was unable to sync GMail contacts today, also. Further, I just tried to check for System Updates through the phone and was told that "check for update is not available at this time." I have no trouble making telephone calls or getting voice mail or texting.
Any ideas? "Sync e-mail over wi-fi only" is NOT on.
I have changed nothing on my phone. Nothing has changed with these e-mail accounts. The ONLY thing that has changed recently (of which I am aware) is that I had a non-functioning phone (not this one!!) removed from my Verizon Wireless account about a week ago, and they said it would take a few days, which would coincide with this past weekend. Is there some parameter that they could have changed at that time that would affect me receiving e-mail over 4G? Again, it is not affecting my internet connection.
My wifi is usually OFF because it runs the battery down, so that is how I know how bad e-mail over 4G suddenly became. The phone shows that it is getting 4G LTE. (I'm beginning to think this is a hardware problem.)
Thanks for any help you can offer.
Loyal (for many years) Verizon Customer

I understand how critical is to get emails while on our cellular network etymomel.
First I recommend removing your exchange server email completely, then power off and on to reset your device and then add email back. I also recommend to clear Data and Cache from your email application Menu>SystemSettings>Apps>All>EmailAccoutns(may be more than one)>ClearData/Cache as applicable. Keep us posted.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Similar Messages

I am having trouble setting up a 2nd exchange server e-mail in entourage

I am having trouble setting up a 2nd exchange server e-mail in entourage on a new macbook air. Trying to set up exactly the same as on iMac but keep getting error message. Any suggestions?

You need to first set up a new account with the information provided by your university. They should supply you with an email address and you should be able to provide your own password. They should also provide you with the name of the incoming mail server to use as well as the name of the outgoing mail server. They should let you know whether to set up the account as an IMAP account or a POP account (with the servers to match).
If you already have all this information at hand, setting up the email account should be fairly easy. What have you tried thus far?

In Lion Apple's Mail sound works for about one half a day each time I close it and then open it but it lasts no longer than that

In Lion Apple's Mail sound works for about one half a day each time I close it and then open it but it lasts no longer than that. What is the fix?

Try disabling the IDLE switch in the account's Advanced preference panel.

Why Mail on Mavericks keeps Writing changes to disc all the time?

I have updated my MacBook Pro (early 2011) to Mavericks and now my IMAP Gmail account on Mail is having a huge endless "Writing changes to disc" on +/- sometimes with up to 50.000 messages, almost freezing my computer all the time! My Inbox, only has aprox 50 messages, I always move mesages to other folders!
Everything just worked fine on Mountain Lion and now my Mac is very slow because of this. Only if I close Mail than I have my Mac back... but I need to work with Mail open, so thats not an option.

I have the same problem. Since installing Mavericks I have a major issue with Apple Mail drastically slowing my whole system down. As others have mentioned, basically Mail takes over the computer and I find myself looking at spinning beach balls for minutes at a time.
From watching the Mail "Activity Window" (accessible from the "Window" menu item), I have discovered that several times a day it starts "Writing changes to disk" (see screenshot) for no apparent reason (it's not as if I have shifted any mailboxes); and that's the time when everything comes to a shuddering halt. It takes a long time, about half an hour or so, to rewrite 27,000 messages (or some other ginormous number, it varies) to disk, and during that time I'm held up. This problem never arose with Mountain Lion.
Basically it seems to me that Mail has been messed up in Mavericks, and Apple needs to fix it.
It was suggested to me by the Apple "Support Advisor" that the fault may lie with Gmail, due to some changes Google have made. But that sounds like it's a cop-out and anyway it's no excuse. Here are two of the biggest companies in the world who are constantly talking with each other about many things. If it's true (unlikely) Apple should be able to communicate with Gmail and get it sorted.

Coherence Error at the time of Starting weblogic Server

Hi ,
I am getting below error at the time of starting Weblogic OSB managed server
We are using osb_cluster1 (Unicast) for osb_server1 managed server.
When Weblogic server try to start the managed server we get following Coherence errors and startup scripts try to point to Oracle Coherence 3.6.0.4.(its mainly happening in starting osb_server1 managed server, this error is not appearing during soa_server1 managed server start)
We don't want to use the coherence at all, we are trying to disable the coherence feature, but hardly getting any success in it, every time during server start-up following error appears.
Let me know if you have any solution to it.
####<Mar 5, 2012 9:18:55.424 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335424> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): This Member(Id=0, Timestamp=2012-03-05 09:18:23.752, Address=11.49.63.33:7880, MachineId=31265, Location=site:kuy.co.wo,machine:deap-idm01,process:10629, Role=OSB-node) has been attempting to join the cluster using WKA list [sjsj-idm.kuy.co.wo/11.49.63.33:9003] for 31 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>
####<Mar 5, 2012 9:18:55.425 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335425> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond>
####<Mar 5, 2012 9:22:58.769 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578769> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Detected soft timeout) of {WrapperGuardable Guard{Daemon=IpMonitor} Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}}>
####<Mar 5, 2012 9:22:58.770 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578770> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Attempting recovery of Guard{Daemon=IpMonitor}>
####<Mar 5, 2012 9:23:25.530 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605530> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Failure to join a cluster for 301 seconds; stopping cluster service.>
####<Mar 5, 2012 9:23:25.879 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605879> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Error while starting cluster: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
OldestMember=n/a
ActualMemberSet=MemberSet(Size=0, BitSetCount=0
MemberId/ServiceVersion/ServiceJoined/MemberState
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:45)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)>
Edited by: 858026 on Mar 4, 2012 6:21 PM
Edited by: 858026 on Mar 4, 2012 6:23 PM

Hi NJ,
In WL console while setting up cluster I have given Messaging
Mode to Unicast,
By default Multicast address and ports comes up
Multicast Address - 239.192.0.0,
Multicast Port- 7001
I have modified the override file but still getting given error logs while server startup and its trying to look for override file in Oracle Coherence 3.6.0.4/coherence.jar
<!DOCTYPE coherence SYSTEM ""coherence.dtd"">
<coherence>
<cluster-config>
     
     <unicast-listener>
          <well-known-addresses>
               <socket-address id=""1"">
                    <address system-property=""OSB.coherence.wka1""></address>
                    <port system-property=""OSB.coherence.wka1.port""></port>
               </socket-address>
               <socket-address id=""2"">
                    <address system-property=""OSB.coherence.wka2""></address>
                    <port system-property=""OSB.coherence.wka2.port""></port>
               </socket-address>
               <socket-address id=""3"">
                    <address system-property=""OSB.coherence.wka3""></address>
                    <port system-property=""OSB.coherence.wka3.port""></port>
               </socket-address>
               <socket-address id=""4"">
                    <address system-property=""OSB.coherence.wka4""></address>
                    <port system-property=""OSB.coherence.wka4.port""></port>
               </socket-address>
               <socket-address id=""5"">
                    <address system-property=""OSB.coherence.wka5""></address>
                    <port system-property=""OSB.coherence.wka5.port""></port>
               </socket-address>
               <socket-address id=""6"">
                    <address system-property=""OSB.coherence.wka6""></address>
                    <port system-property=""OSB.coherence.wka6.port""></port>
               </socket-address>
               <socket-address id=""7"">
                    <address system-property=""OSB.coherence.wka7""></address>
                    <port system-property=""OSB.coherence.wka7.port""></port>
               </socket-address>
               <socket-address id=""8"">
                    <address system-property=""OSB.coherence.wka8""></address>
                    <port system-property=""OSB.coherence.wka8.port""></port>
               </socket-address>
               <socket-address id=""9"">
                    <address system-property=""OSB.coherence.wka9""></address>
                    <port system-property=""OSB.coherence.wka9.port""></port>
               </socket-address>
          </well-known-addresses>
               <address system-property=""OSB.coherence.localhost"">127.0.0.1</address>
               <port system-property=""OSB.coherence.localport"">7890</port>
          </unicast-listener>
          <multicast-listener>
               <address system-property=""OSB.coherence.clusteraddress"">239.192.0.0</address>
               <port system-property=""OSB.coherence.clusterport"">7001</port>
          </multicast-listener>
     </cluster-config>
</coherence>
####<Mar 6, 2012 3:00:44.050 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244050> <BEA-000000> <2012-03-06 15:00:44.015 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational configuration from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.029 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence-override-dev.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.030 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/user_projects/domains/OSBD/servers/osb_server1/tmp/_WL_user/ALSB Coherence Cache Provider/yannht/APP-INF/lib/com.bea.alsb.coherence-impl.jar!/tangosol-coherence-override.xml">
####<Mar 6, 2012 3:00:44.073 PM NZDT> <Error> <OSB Coherence WebLogic> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0ed5cc20267507d3:a44cfd4:135e5bc3642:-8000-0000000000000003> <1330999244073> <BEA-2032481> <Unable to initialize OSB Coherence Cache Provider because there was an error starting Coherence:
com.bea.alsb.coherence.impl.ConfigurationException: Error starting Coherence from cache configuration file /coherence/osb-coherence-cache-config.xml:
(Wrapped) java.lang.reflect.InvocationTargetException
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
     at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1355)
     at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
     at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
     at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
     at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
     at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
     at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
     at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
     ... 29 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override-dev.xml) (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
     at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
     at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
     at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
     at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:14)
     at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
     ... 34 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
     ... 39 more
Caused by: (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
     ... 40 more
Caused by: (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
     at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:120)
     at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:155)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:41)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
     at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
     at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
     at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
     at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
     at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:16)
     at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
     at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
     at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
     at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
     at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
     at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
     at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
     at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     ... 3 more
Caused by: java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
     at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:134)
     at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:71)
     at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:84)
     at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:116)
     ... 43 more
The error can be caused by one of the following:
1) The operational configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-override.xml)
2) The cache configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-cache-config.xml)>

After updating to OS X Mavericks, internet USB dongles topped working. Many other users have faced the same problems.

After updating to OS X Mavericks, internet USB dongles topped working. Many other users have faced the same problems. Can someone please help me out? I am unable to find online help.

Sourcing Drivers for dongles when upgrading OS is a nightmare whether its osx or windoze. It takes the likes of Huawei ages to produce new versions. I strongly recommend getting a portable wifi (mifi) which will work with any device and sits in your pocket not sticking out the usb port where it gets broken. Recommend Huawei E5756

SAP PI Connection Microsoft Exchange Server (Scenario Mail -- SAP PI -- File)

Hi experts,
we want to connect Microsoft Exchange Server to SAP PI. POP3 and IMAP4 is not allowed on mail server side.
But the standard mail adapter in SAP PI (configured as sender communication channel) only works with POP3 and IMAP4.
Can anyone help me to solve this problem
Thank you for your help.
Mario

Hi Priyadshini,
The way that you have developed your java program can be different that the way that SAP did it. With pop3 in PI, as far as i know, it is no possible to change the read/delete properties that the mail server has by default, as Amit and Ilya mentioned you should try with the imap solution or to talk to the mail server administrators.
Are you sure that the messages is being deleted?, have you checked other mail folders in the user account?, may be the message is being moved.
Regards.

Microsoft Exchange server / OSX / Mail / entourage

Just a quick question about this, as a friend of my Dad's has been giving him grief because he doesn't ever receive receipts that emails have been received / opened / read etc.
As far as I know Apple Mail doesn't support Microsoft Exchange Server, but Entourage does - but is it as simple as my Dad using Entourage, or does it need to on a network using Microsoft Exchange Server?
And if so, does this mean that two, common or garden home PC users using Windows Mail or Outlook wouldn't get email receipts from each other either?

what would the situation be with two, bog standard home PCs using XP/Vista and Outlook Express/Windows Mail - would they generate and receive receipt notifications with each other?
Windows Mail and Outlook Express both support receipts (do a web search to find more information and instructions). But they will get receipts only if the receiving email client supports them, so the recipient must also be running one of those two applications or one of the other rare email applications that does. And receipts in Internet-standard email really doesn't mean much; it may return even if the email is selected, or, as is apparently the case with both Outlook Express and Windows Mail, the recipient can disallow sending back the receipt which if true rather defeats the purpose.
where does the Microsoft Exchange Server come into it, which was what I thought powered these?
It may or may not. Both Outlook Express and Windows Mail are standard email applications and work with any standard email server. If the ISP/company/organization is using Exchange and has it set up for POP and/or IMAP, you can use any email application with the server including OE or Windows Mail. But you don't get any of the features an Exchange Server provides: shared calendaring, "real" delivery/read receipts (ones the user can't disallow), etc. For those you must use Outlook.

Exchange server 2013 mail send and received problem

Hi Support,
I have Install Exchange server 2013 and create mail box and local send received locally but days back i have not able to mail send and received. what setting are required for user mail send and received locally. and how to create mx and txt record for my
domain.

Hi,
According to your description, I know that the Exchange server can send/receive internally at beginning, however doesn’t work now. Please correct me if there is anything misunderstand.
Great checklist from S.Nithyanandham. Additionally, how about sending/receiving via OWA? And any error messages when can’t send and receive?
Please make sure the Message Tracking has been enabled and run following command to output track log and check detail information:
Get-MessageTrackingLog |FL > "c:\Track Search.txt"
For more information about Message Tracking logs, please refer to below article:
http://technet.microsoft.com/en-us/library/bb124926
If you want to communicate externally, you need to contact ISP to register DNS MX record.
Best Regards,
Allen Wang

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

KB953804 for delegatesentitemsstyle in Outlook 2003 in combination with Exchange Server 2010 SP1 not working.

KB953804 Full title "Hotfix for An e-mail message does not appear in a user's mailbox if the e-mail message was sent on behalf of the user by a delegate in Outlook 2003."
We have this working for ok Outlook 2003 SP3 in combination with Exchange Server 2003 SP2. Now for mailboxes that are moved to our new Exchange 2010 environment the hotfix stopped working. The sent items get stuck in the outbox of the delegate instead
of moving to the user in whose name the mail was sent. It does not matter if the user mailbox is on 2003 or 2010 as long as the delegated user is on Exchange 2010 SP1 it fails. We use Outlook 2003 SP3 in online mode. Does anyone know how to fix this
or maybe someone knows an alternative way to move the mails to the sent items with Exchange2010 SP1.

Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu

IOS Mail, OS X Mail, MS Exchange Server: Sent Mail Folder?

I use iOS Mail and OS X Mail for my MS Exchange server account. The Sent mail folders are not in sync between the 2 apps. Messages sent from iPhone do not show up under "Sent" in OS X Mail, and messages sent from MacBook don't show up under "Sent" in iOS Mail. They're just not talking to each other. Any way to fix this?
PS: previous similar questions were server-specific, and none refered to MS Exchange.

I don't think this is resolved/resolvable in any straightforward way, though. Here's another thread:
https://discussions.apple.com/message/11565713#11565713

Mail only works with Font Book open

I copied a lot of fonts to my laptop and all the fonts would show up on my desktop publisher. I did not want all the fonts enabled so I disabled the ones I didn't need. Later I noticed that I needed to enable essential fonts for my system, so I did that. BUT now when I start up my mail, it will start up slightly. It looks like it will start but I get the beach ball and it keeps turning and never starts up. The only way I can use my mail is to have the Font Book application opened. If I quit mail and start it up again, it will not work. I can only start up Mail, when I have Font Book up. If I quit Font Book, Mail mail continue to work. It's almost like it needs a jump start from Font Book...
How can I fix this? Is there a particular font that is needed for Mail? Maybe the list of essential system fonts I got was incorrect...

Sorry, but I have to agree with the OP. There should be a switch, and perhaps the default for that switch should be as you stated, however it would be great to have the option there.
And anyway, with file sharing on (like most Macs on my uni network have, see attached), you can put anything in their drop boxes at any time. Airdrop is a simplified version of this, so why not have an always on option as well?
Waiting for a clever person to come up with hack. Perhaps it drains battery life in terms of the ad hoc feature of Airdrop. I dunno.

Updated my iphone 3gs to the ios4.3.5. Now the mail application doesn't function properly. App doesn't sync mail from server - deleting mail hardly works now. When the phone downloads messages from the mail server, it bounces/flashes between accounts too

I recently upgraded to Lion and then updated my iphone to iOS 4.3.5. Now my mail app on the phone seems all messed up. When I check mail, it pulls down mail from the server but I have to go into each individual account to make that happen but even then the view automatically bounces from one mail account to another but never to the Microsoft Exchange server. It also doesn't let me delete mail

I have wasted much time trying different combinations to have push and gmail "send mail as". I guess I have tried so much because it seems like a no brainer.
If you set up as exchange you can at least add in the extra comma and address, but it disappears when you go to send an email.
very frustrating indeed. my solution is to use the gmail app for notifications of new email.

Junk Mail only works after I disable and reenable Junk Mail Filtering

Since installing Tiger, junk mail filtering does not work automatically. It neither marks incoming messages as junk nor moves them to the Junk folder.
I am able to get it to work by selecting Preferences > Junk Mail and then unchecking "Enable junk mail filtering" and then checking it. Mail then asks to "Move Junk Messages" and when I respond "Yes" it marks the appropriate messages as Junk and moves them to the Junk folder.
Unfortunately, it only works for the messages already received. New mail that is "junk" is not marked as such and appears in my inbox and I have to repeat the manual process to get it removed.
Any suggestions for a more permanent solution?
17 iMac Mac OS X (10.4)

Will it also forget the "learned" junk mail? (That took years to learn.)
No.
The MessageRules.plist file stores all Mail.app rules including the default Junk Mail rules.
All Junk Mail "learned" settings are stored in the LSMMap2 file also located at the first level within the Mail folder.
Since the LSMMap2 file can become corrupt as with any other file, this file should be included with a regular backup of the Mail folder and the Mail.app preference file at Home > Library Preferences > com.apple.mail.plist.
All Mail.app account information is stored in the Mail.app preference file.
If you experience any problems with the Junk Mail filter, your options are using the Junk Mail reset feature which resets all "learned" settings or replace the existing LSMMap2 file with a copy of a working backup copy with the Mail.app quit before doing so.
If the Mail.app preference file becomes corrupt (which I've never experienced but others have), when targeting the preference file requires re-entering all email account information. If you have a working backup copy of the com.apple.mail.plist file, you can replace the existing with the Mail.app quit before doing so without having to re-enter all email account information again.
You need to replace an existing backup copy of the Mail.app preference file only after making any changes to account information or when adding or deleting an account in Mail.
You may already have a backup strategy but if not, it is very important since it isn't a matter of if but when your hard drive has a partial or complete failure. I learned my lesson the hard way about 5 years ago. Without warning, I experienced a complete hard drive failure. I didn't maintain a backup at the time and none of the existing data was recoverable.

Exchange Server e-mail only works on 4G or 3G 1% of the time - problem started suddenly

Similar Messages

Maybe you are looking for