Exchange server + Mail = slow speed...

Recently, our mail system switched servers, and now we are on a new Exchange server.
Mail speed became inconsistent, sometimes it's very quick and responsive, sometimes it's stays stuck, and when I look at the progress bar, the speed of outgoing or incoming messages becomes 0 kb/s over many minutes. I have to shut down mail and restart it to push the message out.
What gives? Is this something that can be fixed in Mail settings? Please help, this is super annoying!!! By the way, I have the same problem when I access my accounts using Mail on my MBA. The settings for Mail are the same for my desktop and laptop.
Artur

First, understand that Mail and Entourage connect to Exchange Servers differently. Mail uses IMAP while Entourage uses DAV. Since you said you've tried using both applications then you may indeed have a problem with your account.
I suggest you test your connection under a different user account on your Mac OS X system or a different Mac. If this fails then you can be fairly certain the problem is with your Exchange Server account.
If you find your Exchange Server account is the problem then try resetting your domain password, which is probably the same as your Exchange Server password. Be sure to create a complex password in case your login requires it. It should be 1) eight characters or longer, 2) contain at least one UPPER case letter, 3) contain at least one lower case letter and 4) contain at least one number or special character from the shifted numbers. Something like P@55w0rd would work just fine.
If you can use Entourage with your Exchange Server I encourage you to do this instead of using Mail. Entourage can take advantage of mail, contacts and calendaring with the Exchange Server. For detailed instructions have a look at The Entourage Help Page <http://entourage.mvps.org/exchange/exchangeatwork.html>.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.9)

Similar Messages

Problem with exchange server mail sync with Z1

Hi,
My exchange server mail on the mobile is not frequently syncing as i always push the mail to recieve although i set the setup to recieve automatically as soon as the mail arrived
i have checked the settings lots of time
i deleted the account and added back
i checked the connectivity and data usage on diffrent medias

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Make sure that you have enabled auto sync under settings > auto sync and under email > menu button > settings > your account > synchronize email.
If the settings is correct, you could try with another email client from Google Play to see if you experience any difference behavior.
What are your thoughts about this forum? Let us know by doing this short survey.

Exchange server mail makes iphone freeze and crash

Hi, i bought my iphone last July and everything has been fine with it until a couple of months ago it started freezing and crashing. i tried restoring it to factory settings, sent it to Apple and they replaced it but it still happens!! it happens every 1-2 days, it crashes, freezes, restarts itself. I'll go to use it and its frozen so i have to reset it. I've overslept a few times when it's frozen over night and the alarm hasnt gone off! its completely fine when its not syncing my mail though.
I connect to my work's exchange server and sync mail, contacts and calender. I found that when i stop syncing the mail, the phone is fine, but i need to check my mail for work.
so ive had 2 phones and restored it a few times and it still does it!
help please?
Message was edited by: angel_kitty86

When you restored your iPhone, did you restore from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
Did you transfer your iPhone's backup to the iPhone you received as an exchange under warranty?
If there is a problem with your iPhone's backup, restoring from the backup will also restore the problem.

Safari exchange server mail

our company has email acess from web ( like: 123.44.32.43/exchange/ ) I put this web page link to safari.Safari asks for user name and passworh but the exchange mail server page never comes up.how ca i see my outlook exchange mail webpage from safari.

roberhayim wrote:
It didn't help.
after entering ipadress/exchange at safari it askes for the log in username and password then loads loads the page but nothing displays and keeps loading.
Does your exchange server allow mobile website access?

How to access MS Exchange Server Mail and download attachment using Java ??

Hi guys,
I need to develop a program to access my inbox from MS Exchange Server and also download the attachment using Java language !! Any example code or any site which got tutorial on this ? Thanks !!

Here is a java file that connects to a users exchange account, reads all messages, and writes the attachment to the file system.
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
public class TestNew {
public static void main (String args[]) throws Exception {
// Create empty properties
Properties props = new Properties();
// Get session
Session session = Session.getInstance(props, null);
// Get the store
Store store = session.getStore("imap");
// Connect to store
store.connect(host, username, password);
// Get folder
Folder topFolder = store.getDefaultFolder();
Folder folder = literature.getFolder("newFolder");
folder.open(Folder.READ_WRITE);
Message[] msg = folder.getMessages();
for(int i = 0; i < msg.length; i++){
Address[] from = msg.getFrom();
String subject = msg[i].getSubject();
Object o = msg[i].getContent();
if (o instanceof MimeMultipart) { //attachements available?
MimeMultipart mm = (MimeMultipart) o;
int mmCount = mm.getCount();
for (int m = 0; m < mmCount; m++) { // for each part
Part part = mm.getBodyPart(m);
String disposition = part.getDisposition();
if ((disposition != null) && ((disposition.equals(Part.ATTACHMENT) || disposition.equals(Part.INLINE)))) {
InputStream is = null;
File tempFile = new File("D:\\TEMP\\mailtest\\" + part.getFileName());
FileOutputStream fos = null;
try {
fos = new FileOutputStream(tempFile);
is = part.getInputStream();
int byteCount = 0;
byte[] bytes = new byte[128];
while ( (byteCount = is.read(bytes, 0, bytes.length)) > -1) { //use full read() method for GZIPInputStream to be treated correctly
fos.write(bytes, 0, byteCount);
finally {
try {
if (fos != null)
fos.close();
catch (IOException ioe) {}
try {
if (is != null)
is.close();
catch (IOException ioe) {}
System.out.println("Content: " + o);
System.out.println(from[0].toString());
System.out.println(subject);

Poll Exchange Server Mail

Hi there I need to poll a exchange server email address and initiate a BPEL process from it. I have worked through the sample on http://blogs.bpel-people.com/2007/01/using-email-to-initiate-bpel-process.html to poll a pop3 email and it works fine, but all I need to poll a exchange email. Any ideas?
Rafikki

Hi there I need to poll a exchange server email address and initiate a BPEL process from it. I have worked through the sample on http://blogs.bpel-people.com/2007/01/using-email-to-initiate-bpel-process.html to poll a pop3 email and it works fine, but all I need to poll a exchange email. Any ideas?
Rafikki

Decommissioning old Win2k3 DC impact on Exchange Server mail flow and client Outlook connection ?

People,
I'm going to decommission one of the three AD Domain Controllers / Global Catalog during the business hours that is used by the Exchange Server 2010 SP3 due to it is still running Win2k3 (Exchange Management Console > Server Configuration >
Client Access | System Settings tab, I can see the three DC/GC as follows DC01-VM, DC02-VM, DC03-VM).
So if one of the DC above in the tab is decommissioned during the business hours, is there any impact or steps that I need to take to avoid any email outage or problem ?
Let me know what is the correct steps if possible.
Thanks,
/* Server Support Specialist */

You may wish to remove the DC that is going to be decommissioned from the GCs available for use by Exchange.
In any event that that is the GC that is being used by Exchange during the course of decommission, you will encounter issues.
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway
Hi Vincez,
How do I do that on Exchange Server 2010 SP3 ?
My understanding is that the DC/GC is detected and used by Exchange when it is on the same AD Site.
/* Server Support Specialist */

Need help connecting to exchange server mail

Hi- I am trying to set up my exchange server email on my iPad2. I've put in all the info, but it is unable to verifty account info. I've have good wifi reception- any suggestions?
thanks-

Read here...
iOS: Exchange ActiveSync Account Quick Setup Guide

Erskine Exchange - High pings slow speeds

Hi
I have not long got a BT Whole sale package from Sky(sky connect), whom have been unhelpful will my issue. As the subject says i am experiancing slow speeds and latency. The test results bellow are the best iv had all night was getting 0.01 from speedtest.net most of the night.
If some one could check my line that would be apreciated.
and the BT speed test results
Download speedachieved during the test was - 2072 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8000 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kbps

Hi Diadem, Welcome to the Forums
Unfortunately, the Sky Connect package is a very traffic managed product and is heavily congested. I'm afraid there is nothing we can do over here at the BT forums regarding throughput problems on Connect as it is a Sky package who deal with BT Wholesale.
Sorry
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

How to retrieve from email from Exchange server Mail Account ?

Dear All,
I get the email in my mail box from [email protected]
I need to retrieve the from email address but i am unable to get this.
Following is code i am using.
Folder boundFolder = Folder.Bind(service, WellKnownFolderName.Inbox);
FindItemsResults<Item> unreadMessages = boundFolder.FindItems(unreadSearchFilter, itemView);
if (unreadMessages != null && unreadMessages.Items != null && unreadMessages.Items.Count > 0)
foreach (EmailMessage message in unreadMessages)
string subject = message.Subject.ToString();
string strfromEmail = message.From.Address.ToString(); // I got Error of Object Refrence
string strDisplayName = message.From.Name.ToString();
How can i retrieve from email using C#?
Thanks and regards,
Hardik Ramwani

The From Address isn't returned when you use FindItems see
https://msdn.microsoft.com/en-us/library/office/aa566107%28v=exchg.150%29.aspxto return the From Addresss you need to use either Load or loadpropertiesforitems see
http://blogs.msdn.com/b/exchangedev/archive/2010/03/16/loading-properties-for-multiple-items-with-one-call-to-exchange-web-services.aspx
Cheers
Glen

IPad 3 - Exchange server mail need more than 1 month of mail days to sync - Please help!

Use to have 'No Limit' as an option... where did it go? Worthless if I can't work with email more than a month old.

The option is there, just disappears once you add the account.
The work around is to delete the account and re-add it. Immidately after you add the account go into the account settings and select "Mail Days to Sync". "No Limit" will appear at the top, select it and save. After a few seconds the option will no longer be visible but the mail account will function properly. If you select another time restriction, you'll have to start over.

No Push with Exchange Server Mail after 2.2.1 update.

After updating to 2.2.1 my e-mail account at work isn't being pushed to my Droid X. I have deleted and re-set up the account which has not fixed the problem. I can still get my mail, I just have to go to the account and update it manually. Anyone else having this issue? Anyone have a solution?

elittle wrote:
For some reason, I cannot get the GPS to locate mw with the flashing blue dot since I updated to 2.0.1. It triangulates me to within a city vicinity! Before, it would locate me with the flashing blue dot. Yes, I am indoors in the same place that it used to work before. I have tried with wifi, edge, and 3g. Still no go.
GPS signal has nothing to do with wi-fi, edge or 3g -- but comes from satellites.
Updating likely deleted all the ephemerides of the satellites -- meaning it's like a new restart and has no idea where you are indoors. Try it outdoors, and give it some time, before giving up on it.
Phil

Exchange server mail box configuration issue

Summary: 12 item(s). 10 succeeded, 1 failed.
Elapsed time: 00:19:00
Organization Preparation
Completed
Elapsed Time: 00:07:18
Preparing Setup
Completed
Elapsed Time: 00:00:00
Stopping Services
Completed
Elapsed Time: 00:00:01
Copy Exchange Files
Completed
Elapsed Time: 00:01:00
Language Files
Completed
Elapsed Time: 00:01:49
Restoring services
Completed
Elapsed Time: 00:00:00
Languages
Completed
Elapsed Time: 00:00:11
Management Tools
Completed
Elapsed Time: 00:00:18
Hub Transport Role
Completed
Elapsed Time: 00:02:57
Client Access Role
Completed
Elapsed Time: 00:02:49
Mailbox Role
Failed
Error:
The following error was generated when "$error.Clear();
          $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
          $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
          Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
        " was run: "Process execution failed with exit code 15010.".
Process execution failed with exit code 15010.
Click here for help...
Elapsed Time: 00:02:30
Finalizing Setup
Cancelled

Hi,
This issue occurs if some registry keys are missing or incomplete. Please locate the path to C:\ExchangeSetupLogs\ExchangeSetup.log file and post the error related to your original post for me to research this issue.
What’s more, please refer to this document about this issue.
https://gallery.technet.microsoft.com/office/Exchange-2010-SP1-SP2-c939e791
Thanks.

Any one have idea how to read microsoft exchange server inbox mail

I am trying to build a program which can read the mail from exchange server and i found microsoft exchange server is used MAPI protocol for mail server. I did not found anything which can guide me how to read exchange server mail and what ever i found is, i need to use connector to connect with microsoft exchange server.

The simplest approach is to configure the Exchange server to allow IMAP access. If you can't do that, you'll need to use one of the third party products that use MAPI to access Exchange.

Exchange - ipad mail keeps crashing

When using mail while VPN'ed into my companies network and connected to my exchange server, mail continuously crashes and exits back to the home screen. It seems to be related to syncing large amounts of emails with the exchange server. Once it happens the problem becomes widespread chronically affecting all running apps ( kicking you back to the home screen) it only subsides when you turn VPN off.
Knowing apple, they'll fix it in a year or two
Anyone else experiencing this problem?

Update on what has worked for me so far as a "work around" (not a fix). I believe the issue I am having is related to how ActiveSync on the iPad is handling corrupt or bad messages (perhaps email, contact, calendar objects... not way to know). My laptop with Outlook handles these fine but we had another non-Apple mobile device and my iPad crash around the same time and the fix was to delete the Exchange account off the device. Both use ActiveSync.... I have created a folder (Reviewed) from my laptop (Outlook) where I move all my email after it downloads to Inbox and I have reviewed it. This 'Reviewed' folder does not sync with any mobile device (my iPad or iPhone) so I can't see them after they are moved. For now this allows me to see all my incoming email and possibly identify which items are causing the issue. If I have the problem again, I can hopefully go onto my laptop and move all the "Inbox" messages to "Reviewed" and then my iPad will not hang on ActiveSync attempting to handle that message. It's not perfect but my hope is it will help debug this issue (identify what types of objects are causing it, get a sample and provide to Apple).

Exchange server + Mail = slow speed...

Similar Messages

Maybe you are looking for