Exchange Server Standart 2013 CU3 Maximum Database
Hi everyone,
is there any changing about number of database in CU3 release? up to me it s just 5 database but one of my colleq told me it has increased up to 50 GB in standart version in CU3 release, is this true ? thanks in advance.
Sorry enterprise is up to 50 dbs and with cu2 100dbs. standard is 5 per server.
http://technet.microsoft.com/en-us/library/bb232170(v=exchg.150).aspx
Similar Messages
-
Send As, Send on Behalf and Full Access for Exchange server 2010/2013
[This FAQ contains 2 parts]
Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
Common issue and Troubleshooting on the three permission.
[Testing and Watching]
Based on following blog, I decide to test on my lab:
Full Mailbox Access Rights + Send On Behalf = Send As ?
http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
Description on my lab and test:
Exchange 2010 + Outlook 2010
Exchange 2013 + Outlook 2013
Senders: A01, A02, … , A07, A08
Recipient: A09
A01 grand permission to other senders.
Two methods:
a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
Result as following forms:
1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
To A09.
2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
To A09.
[Common Issue]
1. [Issue]
Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Details as following pic:
[Troubleshooting]
1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
2. [Issue]
Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
Your message did not reach some or all of the intended recipients.
Subject: xxx
Sent: xx/xx/2014 8:20 AM
The following recipient(s) cannot be reached: A09
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Details as below:
[Troubleshooting]
1) Also check the Send As permission configuration first.
2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
\Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
5) Restart Outlook.
Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
From field.
3. [Issue]
Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
message is copied to the Sent Items folder of both A01 and A0x.
[Troubleshooting]
This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2632409/en-us
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
vs additional account defaults to different methods). Check the screenshot:
And please post this somewhere more visible, like blog/wiki page. -
I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
but sometimes mailboxes cannot finished and display below error. I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
and repeat the move mailboxes action several times. Then, the move request completed without error. Have any suggestion? Please help. Thank you!
Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
Error code: -2147024891
MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=132]
Lid: 27161 EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
Lid: 32881 StoreEc: 0x80070005
Lid: 50035
Lid: 64625 StoreEc: 0x80070005
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 56503
Lid: 12716 StoreEc: 0x80070005
Lid: 20794
Lid: 28474 StoreEc: 0x80070005
Lid: 22330 dwParam: 0x0 Msg: 14.03.0123.002:NHK-S08-MBD02
Lid: 1750 ---- Remote Context End ----
Lid: 23354 StoreEc: 0x80070005
Lid: 25913
Lid: 21817 ROP Failure: 0x80070005
Lid: 26297
Lid: 16585 StoreEc: 0x80070005
Lid: 32441
Lid: 1706 StoreEc: 0x80070005
Lid: 24761
Lid: 20665 StoreEc: 0x80070005
Lid: 25785
Lid: 29881 StoreEc: 0x80070005
Context:
Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)Hi Gordon
This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
As suggested by geo try to clean all the DB's first
You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish -
Exchange Server Online 2013 Email Reports & Unattended Emails from reciever
Hello All,
I am very new in exchange server, i there any way to get these following requirements
emails reports - to include info like no. of emails received by a particular user, unattended emails, response time to an email etc?
to check & implement if we can call back an unattended email from receiver's end. For eg. if an email is lying unattended in receiver's inbox for 7 days, same is automatically reverted & the sender is notified along with a copy of that email?
to check & implement if there is any system under which a user cannnot delete any email either incoming or outgoing?
Expecting your valuable suggestion to fulfill above points, thanks in advance
MahendraHello,
Hopefully I can answer some of your questions below:
1. Email reports, here's a good script that can tell how many emails a user has sent/received in a particular time frame, take a look at this: http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/Powershell/NumberofE-mailsSentandReceivedbyoneUser.html
As far as unattended (I'm assuming you mean unread) emails and response time to emails, there is no automated function that can tell you that. You would have to search message tracking logs to see when one email is received by a user, and then see
if/when they replied to it.
2. To have any type of automation on unread emails and a notification back to the sender, I doubt that's possible. Also, that could potentially generate a ton of unnecessary email traffic on your network (for example, I get TONS of alert/notification
emails daily, and don't always read them, having Exchange try to track all of that, and notify the sender of unread messages after 7 days would be a lot to put on exchange). I would look into read and delivery receipts that users can use to track this
type of thing.
3. If you want to put a user's mailbox in a state that they cannot delete anything, either implement Journaling for your entire Exchange Org (http://technet.microsoft.com/en-us/library/aa998649(v=exchg.150).aspx) or if you're interested in doing this
type of thing per mailbox, I would use the:
Set-Mailbox -Identity <userID> -litigationholdenabled $true
http://blogs.technet.com/b/exchange/archive/2013/12/11/litigation-hold-and-in-place-hold-in-exchange-2013-and-exchange-online.aspx
Hope this helps!
Statik -
Exchange Server 2007/2013 migration with ActiveSync users
Hi all
ongoing migration from 2007 to 2013 and have just one bugging questionmark...
ActiveSync users are currently connecting to as.company.com (exchange 2007 CAS, single site internet facing deployment).
do I need legacy hostname?
as per http://technet.microsoft.com/en-us/library/dn130105%28v=exchg.150%29.aspx I do need because it states:
All client connections will be redirected, including Exchange ActiveSync, Outlook Web App, POP3, and IMAP4.
as per http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/OUC-B313 - slide #23, I do not need because 2013MBX will proxy to 2007 CAS.
I've found numerous "proxy connection" infos rather than "redirect connection" but I'm thinking that they are all referenced by that same slide :)
thnx in advance!You can force "proxy connection" for ActiveSync by setting the AS URL to "null". Actually, this approach is recommended by some people to avoid redirection issues for iPhones.
Setting the AS URL to "legacy.company.com" (as recommended in MS docs) will result in redirection. -
How to get rid of the message Client submission probe stuck in the Exchange Server Queue?
We have Exchange 2013 in Hybrid with Office 365.
How to get rid of the message in the Exchange Server Queue?
Mounting the database fixed it.
Thanks!!!Mounting the database fixed it.
-
Linux mail gateway for exchange server
hi everybody...
i have a problem that i want run a linux os and install Mail gateway such as kaspersky mail gateway 5.6 for work with exchange server 2010/2013. now i want know about that its possible that kaspersky mail gateway 5.6 or any other mail gateway on the linux
os can work for Microsoft exchange or not??????????
please help me and guide me for this problemHi,
From the perspective of Exchange, there is no relevant requirement about gateway. Based on my knowledge, it is possible that kaspersky mail gateway 5.6 or any other mail gateway on the linux os can work for Microsoft Exchange.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2013 CU3 Databases only activate on one mailbox server
Hi, guys
I have two Exchange 2013 CU3 Mailbox servers installed, one DAG, 5 databases, each has one copy. I found that if I activated three databases on Mailboxserver1 or Mailboxserver2, then after a few hours, all databases will be activated on the mailbox
server which has three databases activated. All the databases can be activated on Mailboxserver1 or Mailboxserver2, and they work well. I disabled DAC mode for preventing Event 4133 and 4376. And it has the same problem if I enable DAC mode.
From the event log, I found the log when activate one database on another mailbox server, it is Event 3169:
Managed availability system failover initiated by Responder=OutlookMapiHttpDeepTestFailover Component=Outlook.
This caused the database activated on another server.
And I got the message from SCOM, like this:
Alert: Health Set unhealthy
Source: test-mbx - Outlook.Protocol
Path: test-mbx.contoso.local;test-mbx.contoso.local
Last modified by: System
Last modified time: 11/12/2013 5:15:46 AM Alert description: EMSMDB.DoRpc(Logon) step of OutlookRpcDeepTestProbe/DB-01 has failed against test-mbx.contoso.local proxying to test-mbx.contoso.local for [email protected].
Latency: 00:00:00.0320000
ActivityContext:
Outline: [30] EMSMDB.Connect(); [1][FAILED!] EMSMDB.DoRpc(Logon); Likely root cause: Momt
Details:
Error: Error returned in LogonCallResult. Error code = WrongServer (0x00000478)
Log: Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 11/12/2013
5:15:25 AM
- TaskFinished = 11/12/2013
5:15:25 AM
- ErrorDetails =
- RespondingRpcClientAccessServerVersion
= 15.0.712.4012
Latency = 00:00:00.0303884
- ActivityContext =
EMSMDB.Connect() completed successfully.
EMSMDB.DoRpc(Logon)
Task produced output:
- TaskStarted = 11/12/2013
5:15:25 AM
- TaskFinished = 11/12/2013
5:15:25 AM
- Exception = Microsoft.Exchange.RpcClientAccess.RopExecutionException:
Error returned in LogonCallResult. Error code = WrongServer (0x00000478)
- ErrorDetails =
- Latency = 00:00:00.0018801
- ActivityContext =
EMSMDB.DoRpc(Logon) failed.
Task produced output:
- TaskStarted = 11/12/2013 5:15:25 AM
- TaskFinished = 11/12/2013 5:15:25 AM
- Exception = Microsoft.Exchange.RpcClientAccess.RopExecutionException:
Error
States of all monitors within the health set:
Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'test-mbx' -HealthSet 'Outlook.Protocol'
State Name
TargetResource HealthSet
AlertValue ServerComponent
NotApplicable OutlookMapiHttpDeepTestMonitor
Outlook.Protocol Unhealthy None
NotApplicable OutlookRpcDeepTestMonitor
Outlook.Protocol Healthy None
NotApplicable OutlookRpcSelfTestMonitor
Outlook.Protocol Healthy None
NotApplicable OutlookMapiHttpSelfTestMonitor Outlook.Protocol
Healthy None
NotApplicable PrivateWorkingSetWarning....cclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
NotApplicable PrivateWorkingSetError....rpcclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
NotApplicable ProcessProcessorTimeWarning....ienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
NotApplicable ProcessProcessorTimeError....clienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
NotApplicable ExchangeCrashEventError....pcclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
NotApplicable LongRunningWatsonWarning....cclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
NotApplicable LongRunningWerMgrWarning....cclienta... microsoft.exchange.rpcclientacc... Outlook.Protocol Healthy
None
This test is a cause that mailbox databases in DAG is doing failover to another server
Log Name: Application
Source: MSExchangeRepl
Date: 12.11.2013 4:49:46
Event ID: 3169
Task Category: Service
Level: Information
Keywords: Classic
User: N/A
Computer: test-mbx-2
Description:
(Active Manager) Database DB-01 was successfully moved from test-mbx.contoso.local to test-mbx-1.contoso.local. Move comment: Managed availability system failover initiated by Responder=OutlookRpcDeepTestFailover Component=Outlook.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="16388">3169</EventID>
<Level>4</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-11-12T00:49:46.000000000Z" />
<EventRecordID>1606248</EventRecordID>
<Channel>Application</Channel>
<Computer>test-mbx-2.contoso.local</Computer>
<Security />
</System>
<EventData>
<Data>DB-01</Data>
<Data>test-mbx.contoso.local</Data>
<Data>test-mbx-1.contoso.local</Data>
<Data>Managed availability system failover initiated by Responder=OutlookRpcDeepTestFailover Component=Outlook.</Data>
</EventData>
</Event>
I don't know why, anyone know what's the problem?
Thank you.
Nile Jiang- Please mark the post as answer if it answers your question.
http://www.usefulshare.comHi,
After deleting all the health mailboxes and restart
the Exchange Health Manager service, the health mailboxes are recreated successfullly, but when I check the outlook.protocol health, the OutlookRpcDeepTestMonitor or the OutlookMapiHttpDeepTestMonitor is still unhealthy. How can I fix it?
[PS] C:\Windows\system32> Get-ServerHealth -Identity 'MAILBOX1' -HealthSet 'Outlook.Protocol' | ft server,state,name,ale
rtvalue -AutoSize
Server state Name AlertValue
MAILBOX1 OutlookRpcDeepTestMonitor Healthy
MAILBOX1 OutlookMapiHttpDeepTestMonitor Unhealthy
MAILBOX1 OutlookRpcSelfTestMonitor Healthy
MAILBOX1 OutlookMapiHttpSelfTestMonitor Healthy
MAILBOX1 PrivateWorkingSetWarning....cclientaccess.service Healthy
MAILBOX1 PrivateWorkingSetError....rpcclientaccess.service Healthy
MAILBOX1 ProcessProcessorTimeWarning....ientaccess.service Healthy
MAILBOX1 ProcessProcessorTimeError....clientaccess.service Healthy
MAILBOX1 ExchangeCrashEventError....pcclientaccess.service Healthy
MAILBOX1 LongRunningWatsonWarning....cclientaccess.service Healthy
MAILBOX1 LongRunningWerMgrWarning....cclientaccess.service Healthy
Nile Jiang- Please mark the post as answer if it answers your question.
http://www.usefulshare.com -
Best practice on mailbox database size & we need how many server for deployment exchange server 2013
Dear all,
We have an server that runs Microsoft exchange server 2007 with the following specification:
4 servers: Hub&CAS1 & Hub&CAS2 & Mailbox1 & Mailbox2
Operating System : Microsoft Windows Server 2003 R2 Enterprise x64
6 mailbox databases
1500 Mailboxes
We need to upgrade our exchange server from 2007 to 2013 to fulfill the following requirment:
I want to upgrade the exchange server 2007 to exchange server 2013 and implement the following details:
1500 mailboxes
10GB or 15GB mailbox quota for each user
How many
servers and databases are
required for this migration<ins cite="mailto:Mohammad%20Ashouri" datetime="2014-05-18T22:41"></ins>?
Number of the servers:
Number of the databases:
Size of each database:
Many thanks.You will also need to check server role requirement in exchange 2013. Please go through this link to calculate the server role requirement : http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
2TB is recommended maximum database size for Exchange 2013 databases.
Here is the complete checklist to upgrade from exchange 2007 to 2013 : http://technet.microsoft.com/en-us/library/ff805032%28v=exchg.150%29.aspx
Meanwhile, to reduce the risks and time consumed during the completion of migration process, you can have a look at this proficient application(http://www.exchangemigrationtool.com/) that would also be
a good approach for 1500 users. It will help you to ensure the data security during the migration between exchange 2007 and 2013. -
Backing up Exchange Server 2013 CU3 with Windows Server Backup Program
Looking at configuring Windows Server Backup Program to backup Exchange Server 2013 CU3 which is a member a DAG Group using a specific Backup Domain Account.
From my understanding from the following technet Article" Using Windows Server Backup to Backup and Restore Exchange Data" at http://technet.microsoft.com/en-us/library/dd876851(v=exchg.150).aspx I cannot use wbadmin.exe has it uses an older
unsupported version of Powershell.
My question is what are the minimum AD rights required for an AD account needed to be able to backup/restore Exchange Datastore using Windows Server Backup Program in Windows Server 2012?
Thanks,
NIckHi Sathish,
After looking at your response, it all make sense except when I look at what exchange right assigned via RBAC. I understand that the backup service account will require access to the exchange databases
to be able to backing and restoring them. After looking at the different roles
I'm wondering if I require to assign both the Databases roles for Backing up the databases and the Disaster Recovery Role as well to be able to restore the databases has well as having a mailbox on the exchange
server for the backup service account?
Below is explanation of the roles via the ECP
Database Role
This role enables administrators to create, manage, mount and dismount mailbox and public folder databases on individual servers.
Disaster Recovery
This role enables administrators to restore mailboxes and database availability groups in an organization.
Thanks,
Nick -
How to Check Exchange Database Size with PowerShell in Exchange Server 2013
I been trying scripts in powershell to Check Exchange Database Size
Get-MailboxDatabase -Status | select ServerName,Name,DatabaseSize
but it doesn't work for me any suggestion or help?
Also what is the default size limit in exchange server 2013 (both edition) ?I been trying scripts in powershell to Check Exchange Database Size
Get-MailboxDatabase -Status | select ServerName,Name,DatabaseSize
but it doesn't work for me any suggestion or help?
Also what is the default size limit in exchange server 2013 (both edition) ?
That command seems to work for me. Do you get an error when you run it? What happens? To answer your second question, the limit of the databases, the maximum supported size is about 16TB. Best practices are to keep the database to under
a 2TB or even smaller depending on your backup and recovery objectives.
https://technet.microsoft.com/en-us/library/ee832792%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396#Best
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
Hello All,
Database can not mount. In this Database domain Administrator mailbox have.
Please suggest. It's very important
The error:
[PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
Confirm
At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
locate the missing log files, don't continue. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
(hr=0x80004005, ec=-543)
Diagnostic context:
Lid: 65256
Lid: 10722 StoreEc: 0xFFFFFDE1
Lid: 1494 ---- Remote Context Beg ----
Lid: 45120 dwParam: 0x51FF5F0
Lid: 57728 dwParam: 0x51FF68C
Lid: 46144 dwParam: 0x51FF709
Lid: 34880 dwParam: 0x51FF709
Lid: 34760 StoreEc: 0xFFFFFDE1
Lid: 41344 Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
Lid: 35200 dwParam: 0x2EFC
Lid: 46144 dwParam: 0x51FFA55
Lid: 34880 dwParam: 0x51FFA55
Lid: 56264 StoreEc: 0x1388
Lid: 46280 StoreEc: 0xFFFFFDE1
Lid: 1750 ---- Remote Context End ----
Lid: 1047 StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
+ CategoryInfo : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
+ FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
:31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
rationTasks.MountDatabase
+ PSComputerName : eg-exchg-01.ABC.comHi,
This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
1. Check the state of database by following command: eseutil /mh "Path of the database"
Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database”
Note:
Make sure you make a backup of the database before attempting any kind of repairs
6. Once the command completes successfully, then mount the database.
7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
Refer to this file about hard repair:
http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
Hope this will be helpful for you -
Exchange server 2013 supported mailbox databases and public folder databases
I want to know about Exchange server 2013 SP1 Standard and Enterprise version support how many Mailbox databases and Public folder Databases? Total Mailbox and Public folder databases supported information.
I Know as below but not clear:
1) Exchange server 2013 SP1 Sandard edition support 5 Databases, It's include Public folder databases, total=5 or 5 mailbox databases+5 public folder databases=10 databases
2) Exchange server 2013 SP1 Enterprise edition support 100 Databases, It's include Public folder databases, total=100 or 100 mailbox databases+100 public folder databases=200 databases
kindly let me know. Thanks.
BabuHi Babu,
Please check this link too.
http://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspxhttp://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspx
Thanks & Regards S.Nithyanandham -
Maximum database size Exchange 2013 Standard
Hi,
Does anybody is aware of database size limitation for Exchange 2013 Standard. I remember in older version there was a registry tweak to increase database limits.
Thank you
alfa21Hi,
This is the official answer :
Supported: Approximately 16 terabytes.
Best practice:
2 terabytes or less.
Provision for 120 percent of calculated maximum database size.
https://technet.microsoft.com/en-us/library/ee832792%28v=exchg.150%29.aspx
Cordialement,
Mickaël LOPES
Blog : http://lopes.im
-
Exchange Server 2013 CU3 Installation Error - Fresh Installation
Hi All,
I am trying to install Exchange 2013 CU3 on Windows Server 2012 Datacenter Edition. This is New Server Forest build.
Forest Function Level and Domain functional Level is Windows Server 2008 R2
As part of this Fresh installation, I have tried to install CAS Server Role first on the server.
I have full admin (Schema,Entp, Domain) Previliges and installed MS recomended pre-requesities successfully.
Set the Powershell Execution policy as unrestricted.
But, When i run setup file using GUI option. I am getting the below error. I would like to know whether this is ignorable for installation or how to fix the issue.
Error:
Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for
'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
Note: Server OS hardening policy has been applied in this server as per company security policy and Symantec A/V also installed in this server.
Regards
ManojHi,
Same Error for Mailbox Server also.
Stopped the Symantec AV Service and Tried. But result is same.
02/18/2014 06:39:06.0018] [0] Active Directory session settings for 'Get-OrganizationRelationship' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred
Domain Controllers: '{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:06.0050] [0] User specified parameters:
[02/18/2014 06:39:06.0050] [0] Beginning processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0157] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:07.0391] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:07.0469] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0610] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] Ending processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0766] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0015] [0] Active Directory session settings for 'Get-AcceptedDomain' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred Domain Controllers:
'{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:08.0015] [0] User specified parameters:
[02/18/2014 06:39:08.0015] [0] Beginning processing Get-AcceptedDomain
[02/18/2014 06:39:08.0078] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:08.0078] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:08.0140] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0202] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] Ending processing Get-AcceptedDomain
[02/18/2014 06:39:08.0327] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0327] [0] While running the On-Promises test, either Get-AcceptedDomains or Get-OrganizationRelationship return a null value.
[02/18/2014 06:39:08.0717] [0] Finished loading screen WelcomePage.
[02/18/2014 06:45:23.0242] [0] Finished loading screen EULAPage.
[02/18/2014 06:45:26.0908] [0] Finished loading screen RecommendedSettingsPage.
[02/18/2014 06:45:30.0012] [0] Setup is determining what organization-level operations to perform.
Maybe you are looking for
-
Why is iMessage not working when I cross to Canada?
I had no isssues till I upgraded to iOS 6 and from there.. iMessage stopped working when I'm at work even when connected to wi-fi. I put my iPhone on airplane mode so I don't get over charged and use the wi-fi at work to keep all data active but it s
-
Firewall service not permitting as it should
The firewall services in OS X Server 10.5.1 are not permitting traffic as expected. Any ideas here to help me understand why would be appreciated. IP address block 11.22.33.0/26 has been changed from the original but should have no effect on the exam
-
Hi All I have just bought an iPhone and I am really confused about the Mail side of things and was hoping someone could put me straight. I use Apple's mail client into POP3 accounts and .Mac mail. Before I had the iPhone I had my POP3 email set in in
-
<blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/881940]]</blockquote> Internet Explorer 8 has this feature under the Internet Options heading. Does the Firefox 6.0 have a similar feature for placing all or part of the bro
-
Can i store and retrieve image using sql command?
hi the following is what i enter to store image in table using sql*plus however i encounter some errors as shown below. i wondered if i actually can use sql to store image and retreive image or i need other developer beside sql to do. create table im