Exchange server support code 0x80070057

I could not find this code on the Active Sync error codes support page , but at the same time i get the code 0x85002003 in the MS Active Sync software window, which basically says it wasn't able to connect to the exchange server.
Is this Exchange server code essentially saying the same thing as the Active Sync code ?
After having uninstalled Sprite backup agent the sync process seems to have gone to the cows.
Much abliged to anyone with wisdom here
Thanks
Norm
Post relates to: Treo 700wx (Telus Mobility)

ok , i beleive the cause was partly uninstalling Sprite backup agent , but possibly also a "human made" problem. (go figure) I ended up deleting the server information , moving my email , contacts and calendar sync back to my work PC , then reinstalled the exchange server information and set up the links again for email etc on the exchange.
Lo and behold its now doing what its supposed to do but only if it is not cable connected to my work PC via the USB port.
If its USB connected , the phone will error trying to connect to dial out to the high speed data connection for any of my mail , including POP mail accounts. Is this normal ??
Post relates to: Treo 700wx (Telus Mobility)

Similar Messages

Windows Mobile 6 not syncing with Exchange Server / Error Code: 0x80072F06

Just got my Dopod 838 pro with Windows Mobile 6 installed. Having this problem when trying to sync with corp. Exchange server:
The ActiveSync circle on the phone turns yellow/brown, clicking the Error message it says:
The Security Certificate on the server is invalid, please contact Exchange Server Admin or ISP, to install valid certificate on the server.
Support / Error Code: 0x80072F06
That's the problem. My phone doesn't have a Data Link connection problem as I am able to go online with it, also the company's Exchange Server is good, a few days ago I used my Windows Mobile 5 to sync with it without a problem. (but then I lost the phone)
Can some one help? Thanks.

Can u help me here?
I have a windows 6 mobile devices (all) that are having an issue connecting to my exchange server. I am pretty useful with certs but this one is baffling me. I have a windows 2003 sbs server. I recently created a san cer on the server and since then my Windows devices cannot synch. I belive I have setup correctly, or not?? Ther error and the steps are below...
ERROR ON DEVICE:
The security certificate on the server is not valid.Contact your exchange server administrator or ISP to install a valid certificate on the server:
support code: 0x80072f06
STEPS I USED TO CREATE SAN:
1. Created certificate using article http://support.microsoft.com/kb/931351/en-us
I added the following as SN: MAIL.EXTERNAL.COM (my external dns record for mail server)
And added the following for SAN: SERVER01 (my mail server name )
SERVER01.INTERNAL.LOCAL (my mail server fqdn)
2. Exported Root CA cert and imported to my phone
3. configured active synch to connect to mail.external.com on 443
I believe these are the correct steps. I would liked to have been able to export the SAN cert from IIS with private key and install on phone but the webserver template doesnt allow you to export private keys. I also cannot create a dubplicate webserver template to allow the export of the private key as you need enterprise edition of windows 2003 to do this.
So I am at the end of line I tried exporting the cert without the privtate key and importing it but still keep getting samer error.
Why of Why does it not like my cert?
I have just noticed now when I browse to the same address for OWA externally I am getting the error on my browser too even though I have the cert installed on my laptop
Celtic

Which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)

Hi everyone,
Can anyone tell me which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)? Is Exchange server 2007, 2010 and 2013 support it?
Thanks

Exchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info.

Exchange Server Support - 2003 not 2007

My hosts use Exchange Server 2003 still. Does that mean the new Exchange server functionality in Snow Leopard etc. won't work? The reason I ask is that I can't get the address book connected to the Exchange server now.
Thx.

Thanks. That looks to be about the size of it from here too. I spoke to the hosts and they have no plans to upgrade yet. I have configured Mail for IMAP and it seems to work ok.
Thanks for your time there.

Exchange Server 2010 SP3 Windows Installer

Does anyone know when Exchange 2010 SP3 installation will be compatible with the Windows Installer 5.0?
HossFly, Exchange Administrator

Hi,
Based on my knowledge, Windows Installer 5.0 is not supported for Exchange 2010 SP3. Windows Installer 4.5 is supported for Exchange 2010 SP3.
For more information, here is an article for your reference.
Exchange Server Supportability Matrix
http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

MacBook 10.4.7 not talking to Windows 2003/Exchange server

Hi folks
Have a new MacBook 2GHz running 10.4.7, trying to talk to a Windows 2003 network at work. Services needed are Exchange server support (for Microsoft Entourage) and some shared drives over a domain on the Windows server machine. Experiencing problems with both!
Re. shared drives, browsing the network via Finder window sporadically shows up some or all of the Windows machines connected to the network, and the shared drive. It is possible to connect to some of the Windows machines directly, although this is inconsistent. However when attempting to connect to the shared drive, the alias appears correctly, but filling in the details (workgroup, name and password) just leads to an error message saying that the alias could not be found, with the option to delete or fix the alias. Fixing opens up another Finder window but the network is greyed out so you can't point to the shared drive!
Attempting to connect via Connect To Server, either by browsing or entering the smb address line, also allows one to enter the workgroup, name and password, but simply says 'could not connect to the server because the name or password is not correct' (even though it is).
Firewall is on but allowing Windows Sharing. AppleTalk is active. Connecting over a wireless network but ethernet connection seems to make no odds.
In terms of Entourage, the system simply wont find the Exchange server, which I'm presuming may be symptomatic of whatever is causing the above!
Any help/ideas/thoughts most gratefully received.
Cheers
Dan
MacBook 2GHz Mac OS X (10.4.7)

I hope this helps. But, Apple has confirmed a significant bug in 10.7.4 that breaks SMB. Their support says they are working on it, but they do not know when the fix will be released. It has broken SMB at all sites I support including my own location where Lion server has the updated version as well. Only AFP works but not consistently. The suggestion is to restore 10.7.3 from a backup or wait until the fix is released. SMB does work - but only when admin authentication is used on Mac servers - don't know about Windows Servers. I do know the client side of Mac's also are affected with SMB issues. Good luck!

Using Mac Mail to view Exchange server account

So my iPhone 3GS has no difficulty syncing e-mails, contacts, calendars from my workplace exchange server, but I can't sync these same workplace e-mails, contacts, etc... with Mac Mail on my home computer. My computer apparently can't recognize the exchange server account, and the IT guy at work says that you can only sync phones to our work server, not home computers. Does that make sense? Or am i just not setting up Mac Mail properly (something like changing the Port #?). I guess I just don't understand how phones can sync but computers can't...
Any help would be much appreciated.

In the world of Microsoft Exchange, that makes sense. iPhones use a network technology called Active Sync, which is designed for mobile devices. Mail uses Exchange Web Services which has more functionality.
If your Exchange server supports a third technology called IMAP, then you can configure Mail to use that instead of EWS.

Snow Leopard-Exchange Server 2003-Entourage 2008 (12.2.1)

+I have one final question before I upgrade to Snow Leopard.+
I currently run a 2.8 GHz Mac Pro, Leopard 10.5.8, Entourage 2008 (12.2.1) using Exchange server 2003. Everything is happy and works well.
I understand that I won't be able to use the new Snow Leopard built-in Exchange Server support.
*But, if I upgrade to Snow Leopard...will everything stay happy with what I've been running?*

There are connectivity issues between Exchange Server 2003 and Exchange accounts in Entourage 2008 running on Snow Leopard. These connectivity issues are also evident via web-based email (Safari & FireFox) on Snow Leopard and Exchange Serve 2003.
You will eventually loose connection to Exchange Server 2003. Restarting your computer will solve the problem temporarily.
POP accounts appear to work fine in this environment.

How to get contact details in C# code , when new contact is created in Exchange Server 2013

Hi all,
In my exchange server 10 users there, i need to create service that if any user log in his account and create new contact,
then i need that new contact details in C# code immediately [EWS Managed API].
how can i achieve this ?

If you want to be notified when a user creates a contact then look at notifications (either streaming or push) on the contacts folder
http://msdn.microsoft.com/en-us/library/office/dn458791(v=exchg.150).aspx . You will need to subscribe to every users contacts folder you want to monitor .
This will give you the EWSid of the new contact that has been created then to access the details you just bind to it
http://msdn.microsoft.com/en-us/library/office/microsoft.exchange.webservices.data.contact.bind(v=exchg.80).aspx
Cheers
Glen

Exchange Server 2013 Missing file on ISO install Error Code 1603

Hi all, a mystery needs solving any suggestions much appreciated:
We are trying to install Exchange Server 2013 on Windows 2012 server.
The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
All preparation and requisites in place.
During Stage 2 Copying files, we receive an error code 1603 and installation halts.
The error states:
Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
Verify that the file exists and that you can access it.'.
We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
We have tried both Mailbox/Client Access and Mailbox only installations.
The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
Any ideas anyone, could we source a different ISO or copy of the file or ?????
Many thanks in advance

Had the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
a CSS and not as a TXT.)
I reran the install and it completed without issue.

Exchange server 2013 supported mailbox databases and public folder databases

I want to know about Exchange server 2013 SP1 Standard and Enterprise version support how many Mailbox databases and Public folder Databases? Total Mailbox and Public folder databases supported information.
I Know as below but not clear:
1) Exchange server 2013 SP1 Sandard edition support 5 Databases, It's include Public folder databases, total=5 or 5 mailbox databases+5 public folder databases=10 databases
2) Exchange server 2013 SP1 Enterprise edition support 100 Databases, It's include Public folder databases, total=100 or 100 mailbox databases+100 public folder databases=200 databases
kindly let me know. Thanks.
Babu

Hi Babu,
Please check this link too.
http://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspxhttp://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspx
Thanks & Regards S.Nithyanandham

In Exchange server 2007, is syncing notes to iOS device supported?

In Exchange server 2007, is syncing notes to iOS device supported? Specially iPhones, and iPads.
Thanks.

Hi,
Here is an article about how to set up Exchange 2007 on iPhone, iPad and iPod:
http://www.rackspace.com/knowledge_center/article/setting-up-exchange-2007-on-iphone-ipad-ipod-ios-7
When setting up, you can select the services that you wish to sync with the Exchange Server.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards.

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

Exchange Server 2013: Failed to connect. Winsock error code: 10060, Win32 error code: 10060.

Dear All,
I have exchange server 2013 running with windows server 2012.
My email server have been send and receive email with internal and external as normal.
Today, i got the problem the email cannot send out to external and get the error below:
Please comment.
BR,
Khemarin
[email protected]

Hi Khemarin,
If it is Smarthost, are you able to telnet your smarthost using 25 port number?
Also please check your Send Connector setting.
http://technet.microsoft.com/en-us/library/aa998662(v=exchg.150).aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Does Groupware portlet support Exchange server 2007

Hi ALL,
Does anyone had any idea, will the groupware portlet support Exchange server 2007. I tried with exchange 2003 is working with groupware.
Please let me know any ideas to display email, calender, tasks in the portal.
Thanks
Manu.

If groupware portlet is support for exchange 2007, is there any other options.

Exchange server support code 0x80070057

Similar Messages

Maybe you are looking for