Exchange services drain on mobile data
Ever since the upgrade to .562 on the Arc s, exchange services seems to be using up much of my mobile data usage when left on (according to all the traffic readers). The previous version wasn't like this. Have had to switch it to manual sync now.
Anyone else having the same problem?
I've also noted that the battery doesn't last as long as before the upgrade.
I've developed the same problem - somehow my Ray (on 4.0.4 - 4.1.B.0.587) exchanged data with Exchange server via background a whopping 1,73Gb (my total folder size on Exchange is 139Mb) in just a week (07.09-14.09).
Tech is looking if they see what has been happening on server side.
Similar Messages
-
Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?
Please disregard this question. I'll submit a shorter and more direct question. Thanks.
-
Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
LouisaHi, l have the same problem, were you able to resolve?
-
Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Why is my iphone saying not subscribed to a mobile data service
why is my iphone saying not subscribed to a mobile data service
Most likely because it is not subscribed to a mobile data service.
Check with your cell carrier to ensure that your cell data plan is properly provisioned or get a new SIM for it. -
i want to use the internet on my ipone4 but it says that im not subscribed to a mobile dater service how can i fix this
Subscribe to a mobile data service.
Call your provider and make sure you have a data package. -
I am having a similar problem with my new iPhone 5. I just bought it few days back but unable to use the internet. I am getting a message "not subscribed to a mobile data service". I have reset mobile network setting several times. But the problem doesn't go away.
agree m also having same problems and same notifications...
-
when opening safari it tells me I am not subscribed to mobile data. This has happened to my I pad2 and I phone since downloading IO6
No carrier "automatically" unlocks at end of contract - many won't do it at all, even if requested. I don't know what your carrier's policy is since you didn't say what country you're in.
However, if I understand you correctly, you didn't change carriers so it doesn't matter if it was unlocked or not. Try the following steps, as needed:
1. Reset phone - press both home and sleep/wake buttons for at least 19 seconds until the Apple logo appears
2. Settings > General > Reset > Reset Network Settings
3. Restore phone in iTunes using a backup
4. Replace SIM card (don't care what Telstra says)
5. Restore phone in iTunes as new, without using a backup
6. Take phone to Apple. -
Windows 7 Pro x64 does not detect HP Mobile Data Protection Sensor (accelerometer)
Hello there.
I installed win7pro x64 yesterday and already came across a serious problem that makes my way of using the notebook a bit dangerous for my precious data.
When I was working on HP-branded Vista 32bit (from recovery partition etc), there was a device called HP Mobile Data Protection Sensor together with HP ProtectSmart (or Protect Smart) software. In other words, the HDD accelerometer that parks HDD's heads when it "feels" it's falling or something, and software for it. It worked brilliantly.
Until I decided to install Win7... Then, surprisingly after a driver-install failure and taking a look at the Device Manager I noticed that there's no such device! I checked it three times, looked at every device's property, even reinstalled Vista 32bit back - it showed again - and installed Win7 - not detected again. There's nothing that has Device ID's HPQ004! I remember people saying that after fresh Windows install, there were 6 unknown devices or more. I had only 5. [Fingerprint device, 3x MemCard reader and IR receiver]. There was no accelerometer... Also, when I try to install the drivers/software, the windows pops up:
ProtectSmart Hard Drive Protection: with text Property.AccelerometerNotPresent
and then another one saying something like Features were not installed because of installation error or unsupported feature.
So now I'm stuck with a notebook that is unsafe to travel with, because the disk is no longer protected
I already installed all the drivers available from HP page, even downloaded newest ones from Intel (chipset) etc.
Is there a solution to this? Has anyone else encountered this problem?
Windows 7 is officially out and available as RTM version, not beta, so I think HP should open support for it and release new drivers for win7! And most importantly, fix this issue ...
This question was solved.
View Solution.Well, thanks to myself, I fixed it. After some thinking I remembered that ACPI = BIOS-related. It appears that there is a problem with the newest (F16) BIOS.
F.16 changelog is below:
Version: F.16 A (26 May 2009) Fixes
Updates the Intel MRC Code to version 2.7.
Updates the Intel AHCI OP ROM to version iSrc 1.20_E.0012 11252008.
Updates the BIOS to support Microsoft Windows Vista Operating Systems with Service Pack 2 (SP2).
I went back to version F.14 and... boom! New (unknown) device found And guess what, it's ACPI/HPQ0004... So now my HDD is protected again ^^ yay!
I don't know which of these changes cause that, but it looks that that can be fixed.
I'll go back to F.16 again to see if the device will disappear and then contact HP support on that case.
EDIT: Well, F.16 breaks things again, so it's definetely a BIOS problem. Thanks for... umm... well... at least spread the word, guys I hope this helps if someone has the same problem.
Message Edited by dark_skeleton on 08-22-2009 07:08 AM
Message Edited by dark_skeleton on 08-22-2009 07:11 AM -
While consuming Fusion CRM web service in ADF mobile throwing an error
Hi,
I am developing ADF Mobile using JDeveloper
11.1.2.3 and consuming Fusion CRM ADF Web Services.
While executing CRUD operations with these web services
in ADF mobile app, I am getting SOAP response as *Error in getting response
and got result nothing *.
And also noticed as using JDeveloper ADF mobile App, unable to create URL service
Data Control - REST based for FUsion CRM web services. Where as I am able to
create SOAP based web services data control. It' strange or surprise.
Did anyone face the above problems. Kindly let me know any suggestions or
samples to the below contacts
Regards
Bhaskara Reddy S
00919008466722
bhaskara.sannapureddy at Crmit.comDear Frank,
Based on below links, Fusion CRM also supports REST also apart from regular SOAP Web Services.
http://niallcblogs.blogspot.in/2012/10/204-calling-rest-service-from-fusion-crm.html AND
http://docs.oracle.com/cd/E15586_01/fusionapps.1111/e20388/F412758AN17B21.htm
(For e.g one of linked in profile :http://www.linkedin.com/in/minalkhodani , many teams are developing using SOAP & REST)
Designed and developed integration services using SOAP and REST web services for Oracle Fusion CRM Marketing Modules.)
When creating URL based data control, getting an Error as "Forbidden" , (Does it mean NOT SUPPORTED??) . Kindly advice.
I am calling WEB SERVICE thru SOAP in AMX PAGE code as below after creating Web Services Data Control from ADF Mobile UI thru JDeveloper IDE.
== CODE SNIPPET OF AMX PAGE CALLING SOAP FUSION CRM WEB SERVICE =======
<?xml version="1.0" encoding="UTF-8" ?>
<amx:view xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:amx="http://xmlns.oracle.com/adf/mf/amx"
xmlns:dvtm="http://xmlns.oracle.com/adf/mf/amx/dvt">
<amx:panelPage id="pp1">
<amx:panelFormLayout id="pfl2">
<amx:inputText value="#{bindings.name.inputValue}" label="Person First Name" id="it1"/>
<amx:inputText value="300000001210220" label="Person Object Id" id="it2"/>
</amx:panelFormLayout>
<amx:facet name="header">
<amx:outputText value="Create Person in Fusion CRM" id="ot1"/>
</amx:facet>
<amx:facet name="primary">
<amx:commandButton id="cb1" text="Back" action="__back"/>
</amx:facet>
<amx:facet name="secondary">
<amx:commandButton id="cb2"/>
</amx:facet>
<amx:panelFormLayout id="pfl1">
</amx:panelFormLayout>
<amx:outputText value="#{bindings.message.inputValue}" id="ot2"/>
<amx:outputText value="#{bindings.code.inputValue}" id="ot3"/>
*<amx:commandButton actionListener="#{bindings.createPerson.execute}" text="createPerson"*
*disabled="#{!bindings.createPerson.enabled}" id="cb3"/>*
<amx:iterator var="row" value="#{bindings.personParty1.collectionModel}" id="i1">
<amx:panelLabelAndMessage label=" 300000001210220" id="plam2">
<amx:outputText value="#{row.PartyId}" id="ot5">
<amx:convertNumber groupingUsed="false"/>
</amx:outputText>
</amx:panelLabelAndMessage>
<amx:panelLabelAndMessage label="#{bindings.name.inputValue}" id="plam1">
<amx:outputText value="#{row.PersonFirstName}" id="ot4"/>
</amx:panelLabelAndMessage>
</amx:iterator>
</amx:panelPage>
</amx:view>
Regards
Bhaskara Reddy -
How do I only use the wifi internet because I don't want to use my mobile data because I don't have Internet on my price plan and its costing me money?
Well, if you are running iOS 6.0 or later.
The option supposed to be in Settings>General>Cellular>Cellular Data---Off & Enable 3G---Off
I think you'd better check the settings in Privacy>Location Services.
Some items in it need Cellular data like"setting time zone" and "Find my iPhone'. -
Since iOS 5.1 mobile data are missing, display ".,:|vodafone.de °"
with iOS 4.3.5 all was good
since the update to iOS 5.1 internet dataconnection is not available
APN-data are correct
Konsole Output:
Mar 14 15:52:29 iPad-Tomas-Dils dataaccessd[42] <Warning>: notify name "SignificantTimeChangeNotification" has been registered 20 times - this may be a leak
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Notice>: START LOCATION UPDATE
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0xffffffff] at 353429541.146768
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Notice>: STOP LOCATION UPDATE
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Notice>: STOP LOCATION UPDATE
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Notice>: START LOCATION UPDATE
Mar 14 15:52:21 iPad-Tomas-Dils UserEventAgent[12] <Notice>: (Note ) PIH: SIM is now ready.
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 lookup_baseband_info_old: The SIM status has changed
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 load_activation_records: Could not extract ICCID from record
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 load_activation_records: This is a wildcard record
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 copy_activation_record: No unlock record. Looking for a care flag.
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 copy_activation_record: No care flag. Looking for a record that matches the SIM.
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 copy_activation_record: Looking up the record for ICCID 89492026211462193448
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 copy_activation_record: No record for the SIM. Looking for wildcard.
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 determine_activation_state_old: This device is a phone. It supports factory activation.
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 determine_activation_state_old: The original activation state is WildcardActivated
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusReady
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 determine_activation_state_old: No ICCID in the activation record
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 determine_activation_state_old: The record contains a wildcard ticket
Mar 14 15:52:21 iPad-Tomas-Dils profiled[259] <Notice>: (Note ) profiled: Service starting...
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 3f315d98 determine_activation_state_old: The activation state has not changed.
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Error>: Cellular Data Plan Settings not found or not a dictionary.
Mar 14 15:52:21 iPad-Tomas-Dils profiled[259] <Notice>: (Note ) profiled: Checking for new carrier profile...
Mar 14 15:52:21 iPad-Tomas-Dils profiled[259] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc : Ung-l-t-i-g-e-s -P-r-o-f-i-l^J-U-S -D-e-s-c-: -I-n-v-a-l-i-d -P-r-o-f-i-l-e^J-D-o-m-a-i-n -: -M-C-P-r-o-f-i-l-e-E-r-r-o-r-D-o-m-a-i-n^J-C-o-d-e -: -1-0-0-0^J-T-y-p-e -: -M-C-F-a-t-a-l-E-r-r-o-r
Mar 14 15:52:21 iPad-Tomas-Dils profiled[259] <Notice>: (Note ) profiled: No configuration profile found in carrier bundle.
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Error>: Cellular Data Plan Settings not found or not a dictionary.
Mar 14 15:52:21 iPad-Tomas-Dils CommCenter[57] <Notice>: STOP LOCATION UPDATE
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x27ab00 [0x3fbc2650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x2788a0 [0x3fbc2650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x27abb0 [0x3fbc2650]>{contents = "262022603596847"}
2 : <CFString 0x278700 [0x3fbc2650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x278730 [0x3fbc2650]>{contents = "012667002828582"}
4 : <CFString 0x2788e0 [0x3fbc2650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x278910 [0x3fbc2650]>{contents = "89492026211462193448"}
11 : <CFString 0x278930 [0x3fbc2650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x278730 [0x3fbc2650]>{contents = "012667002828582"}
12 : <CFString 0x2789a0 [0x3fbc2650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x27abb0 [0x3fbc2650]>{contents = "262022603596847"}
Mar 14 15:52:21 iPad-Tomas-Dils lockdownd[26] <Notice>: 01737000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Mar 14 15:52:22 iPad-Tomas-Dils kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to -1
Mar 14 15:52:24 iPad-Tomas-Dils CommCenter[57] <Error>: kNewServingNetwork sent, MCC: 262 MNC: 2
Mar 14 15:52:24 iPad-Tomas-Dils configd[45] <Notice>: network configuration changed.
Mar 14 15:52:24 iPad-Tomas-Dils dataaccessd[42] <Warning>: notify name "SignificantTimeChangeNotification" has been registered 20 times - this may be a leak
Mar 14 15:52:24 iPad-Tomas-Dils apsd[50] <Warning>: <APSCourier: 0xfe64570>: Stream error occurred for <APSTCPStream: 0x26f0e0>: Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn-t -b-e -c-o-m-p-l-e-t-e-d-. -(-k-C-F-E-r-r-o-r-D-o-m-a-i-n-C-F-N-e-t-w-o-r-k -e-r-r-o-r -2-.-)-" -U-s-e-r-I-n-f-o-=-0-x-2-6-f-f-3-0 -{-k-C-F-G-e-t-A-d-d-r-I-n-f-o-F-a-i-l-u-r-e-K-e-y-=-8-}
Mar 14 15:52:24 iPad-Tomas-Dils CommCenter[57] <Notice>: Client [com.apple.persistentconnection[apsd,50]] is telling PDP context 0 to go active.
Mar 14 15:52:25 iPad-Tomas-Dils apsd[50] <Warning>: <APSCourier: 0xfe64570>: Stream error occurred for <APSTCPStream: 0x271540>: Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn-t -b-e -c-o-m-p-l-e-t-e-d-. -(-k-C-F-E-r-r-o-r-D-o-m-a-i-n-C-F-N-e-t-w-o-r-k -e-r-r-o-r -2-.-)-" -U-s-e-r-I-n-f-o-=-0-x-2-7-5-d-b-0 -{-k-C-F-G-e-t-A-d-d-r-I-n-f-o-F-a-i-l-u-r-e-K-e-y-=-8-}
Mar 14 15:52:25 iPad-Tomas-Dils CommCenter[57] <Notice>: Client [com.apple.persistentconnection[dataaccessd,42]] is telling PDP context 0 to go active.
Mar 14 15:52:25 iPad-Tomas-Dils dataaccessd[42] <Notice>: 136130|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1009 "Es besteht anscheinend keine Verbindung zum Internet."
same problem with another SIM-card on the iPad with iOS 5.1
SIM-Card work fine in iPhone 4 with iOS 5.0.1
nothing from http://support.apple.com/kb/TS3780 worked
What can I do?I found that mobile data stopped working on my iPad once upgraded to IOS 5.1. I have resolved the problem by re-applying the settings in Settings > Cellular Data > APN Settings which had (very bizarrely) been over-written as a result of the upgrade process.
Clearly your APN settings will be specific to your data plan, but if you contact your contract provider, they should be able to tell you what they are.
Hope this helps. -
Dear all,
I have successfully configured the mobile data entry in SAP. i tested the transaction LM00 and it is working fine on sap gui on pc. can someone explain to me how i will open this transaction on a Windows ce device i am working on SAP ECC 6.0 i have also the pda barcode device. do i need to install something on the pda device? how?
thanksTake a look at the SAP Console in help ... here is a link to get you started... I will post a better one later in the week as I am away now for a bit.
Search in service place and help also for SAP Console.
http://help.sap.com/saphelp_me21sp2/helpdata/en/22/5074de1b337942a27a98f42de8f622/content.htm -
Facing issues with 3g Mobile Data Usage Current Period and Apps Volumes are differ.
Hi All,
i am facing some data mismatch with my iphones. the actual mobile data usage volume and data usage for Apps volumes are showing different data.
for eg : Mobile Data Usage - Current Data Usage - Current Period volumes showing 342 MB but if i check the Use Mobile Data For Apps Volumes for all Apps including System Service Data's and Uninstalled Data's are showing very less ( around 200 MB only ) compare with Current Period Volumes.
Mobile Data Usage - Current Data Usage - Current Period and Use Mobile Data For Apps ( Apps wise data usage ) Data's are not matching..
Please let me know will it show like that only or its an issue ???? if you want i can share the screen shot as well.Hello kasinathadurai,
Welcome to the Apple Support Communities!
I understand that you have some questions about cellular data usage and apps that use cellular data. For this question, I would refer you to the attached article that will help explain how data usage, call time, and app cellular data is calculated.
Learn about cellular data settings and usage on your iPhone and iPad (Cellular Model) - Apple Support
Have a great day,
Joe -
Mobile data network loss but with signal bars
i keep trying to send text messages or make phone calls but they keep failing and returning a message saying unable to connect to data network, i thought that only applied for internet services? its saying i have atleast 3 or 4 bars of signal when i do this. any ideas?
Have you searched for similar topics?
https://talk.sonymobile.com/t5/Xperia-Z3-Z3-Dual/lollipop-upgrade-mobile-data-doesn-t-work/m-p/96916...
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien
Maybe you are looking for
-
Joining Windows client to Leopard PDC domain
Leopard Server 10.5.2 providing OD, AD PDC, DHCP, DNS, AFP, SMB all on and "running" XServe Intel Mainly Windows XP clients but also some OS X clients I am trying to set up a Leopard server to host a domain on our internal company LAN. I have followe
-
Hello, Since I started to learn SAP I've been seeing many different solutions to the same problems, but always with some added value in the newer of them. The question is: is MDM import manager supposed to be a replacement to LSMW? if not when should
-
Trying to get home sharing working on a corporate wireless network. Cisco wireless. WLC5508 controller Cisco 3502 access points All apple devices on same WLAN - security WPA2-PSK ITunes account up to date All devices laterst software. Can ping apll
-
Can I connect a 21.5 inch Formac Cinema Display from a G5 Powermac to a new Mac Mini
-
I have an Iphone 3gs. My husband just bought an Iphone 4. As far as contacts, when he first connects, will he lose his phone numbers on his phone and will mine be loaded on instead? How do I prevent this?