Exchange sync not picking up appts created from Lotus Invitation

We have two iphones syncing with Exchange. Everything is working well except some calendar items. Appointments that were created by accepting a invite from a Lotus Notes user (via an attached .ics file) are not syncing. They appear correctly on the calendar in Outlook they just don't sync with the iphone. This problem started around 7/15/09 prior to that it worked okay.
Any suggestions?

Your responding much appreciated. Not aware that I need to make any changes re IPod settings. I frequently purchase/download music from I-Tunes and things have always run seamlessly, i.e. transferring the purchased songs into whatever playlists I want, or creating a new playlist and transferring songs from "purchased". Then the next sync between Ipod and pc picks up all the new additions. But not this time? So weird. I've changed nothing. So I don't know what I'm supposed to change (correct?) in order to get my new purchases onto the Ipod. Any further suggestions? I checked the link you gave me ... could see nothing more I could do. Cheers - Marg

Similar Messages

PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

Accounting exchange rate not picking while running result analysisKKA2

Hi All,
WHile running Result analysis with KKA2 the accounting exchange rate not picking correctly.
When we run the KKA2 from may to sep it is taking may month as default rate and it is extending to june aug,sep instead of seperate exchange rates for each month.
We compared all configurations for this RA key with existed RA key .All the setting are one and the same.in OKG2,OKG3,OKG4,OKG5
PLease help ...
Regards,
Mohan

Hi srikanth,
It is not daily exchange rate.
Actually we copied PS LCR RA key to PS IAS.
PS LCR is working fine and it is picking correctly for the respective months.
Where as In PS IAS it is taking starting month and same continuing for other consecutive months.
Regards,
Mohan

HT1692 why does my ipad not pick up distribution lists from my contacts list?

why does my ipad not pick up distribution lists from my contacts list?

What is selected under the Music tab for your iPhone sync preferences with iTunes?

Service entry Sheet does not pick any Condition charges From Service PO

Hi All
Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

HI,
Please check Sap note 381030
Along with other thing It says
"Delivery costs are generally not supported in external services management and in case
of blanket purchase orders, item category D or B. Instead of representing delivery
costs via conditions, in case of service documents, freight costs and other, SAP
recommends to add in additional service lines."
So that is the reason you are not getting those account entry in the time of service entry sheet
Use another service line with text ( or service master) for the additional costs as suggested by SAP
Hope it clarifies

HT1296 My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

Only the carrier it is locked to can authorize unlocking it. Contact them.

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Profit center not picking correctly in PO from sales order

Hi Experts,
Profit center is not picking correctly.. in PO
In material master Profit center is configured as XXXX
We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
There is one purchase requistion for the same material with two line items
But we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
What could be reason ? Help in this regard will be highly appreciated.
Thanks in advance
Narayanan

Hi Narayan
Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
BR,Ajay M

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Receiving Open Interface not picking Inter-Org records from Interface

Hi,
I am trying to receive the inter org transfer through the Receiving Open interface, but the interface not picking the data from the interface tables (RCV_HEADERS_INTERFACE, RCV_TRANSACTION_INTERFACE).
I am in 11.5.10.2, all the sources worked fine like Vendor, Internal Order, Customer but the issue is with the Inventory source (inter orgs)
Please could you advise what could be the reason for the interface for not picking the Inventory source data from the interface table.
Below are the interface insert script that am using..
INSERT INTO RCV_HEADERS_INTERFACE
(HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
AUTO_TRANSACT_CODE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPMENT_NUM,
RECEIPT_HEADER_ID,
SHIP_TO_ORGANIZATION_ID,
EXPECTED_RECEIPT_DATE,
EMPLOYEE_ID,
VALIDATION_FLAG
VALUES
(rcv_headers_interface_s.nextval , --Header_Interface_Id
rcv_interface_groups_s.nextval, --Group_Id
'PENDING', --Processing_Status_Code
'INVENTORY', --Receipt_Source_Code
'RECEIVE', --Transaction_Type
'DELIVER', --Auto_Transact_Code
SYSDATE, --Last_Update_Date
-1, --Last_Updated_By
-1, --Last_Update_Login
SYSDATE, --Creation_Date
-1, --Created_By
'ICR-001', --SHIPMENT_NUM
21073573, --RECEIPT_HEADER_ID
2266, -- SHIP_TO_ORGANIZATION_ID
SYSDATE+1, --Expected_Receipt_Date
5543, --Employee_Id,
'Y' --Validation_Flag
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
CATEGORY_ID,
QUANTITY,
UNIT_OF_MEASURE,
ITEM_ID,
AUTO_TRANSACT_CODE,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
SHIP_TO_LOCATION_ID,
RECEIPT_SOURCE_CODE,
TO_ORGANIZATION_ID,
DESTINATION_TYPE_CODE,
DELIVER_TO_PERSON_ID,
LOCATION_ID,
DELIVER_TO_LOCATION_ID,
SUBINVENTORY,
LOCATOR_ID,
HEADER_INTERFACE_ID,
VALIDATION_FLAG,
SHIPPED_DATE
--SELECT
VALUES
rcv_transactions_interface_s.nextval, --Interface_Transaction_id
rcv_interface_groups_s.currval, --Group_id
SYSDATE, --Last_update_date
-1, --Last_updated_by
SYSDATE, --Creation_date
-1, --Created_by
-1, --Last_update_login
'RECEIVE', --TRANSACTION_TYPE_RECEIVE
SYSDATE, --TRANSACTION_DATE
'PENDING', --PROCESSING_STATUS_CODE
'BATCH', --PROCESSING_MODE_CODE
'PENDING', --TRANSACTION_STATUS_CODE
203, -- CATEGORY_ID
20, --QUANTITY
'EACH', --UNIT_OF_MEASURE
4379131, --ITEM_ID
'DELIVER', --AUTO_TRANSACT_CODE
21073573, --SHIPMENT_HEADER_ID
16566939, --SHIPMENT_LINE_ID
101629781, --SHIP_TO_LOCATION_ID
'INVENTORY', --RECEIPT_SOURCE_CODE
2266, --TO_ORGANIZATION_ID
'INVENTORY', --DESTINATION_TYPE_CODE
13706, --DELIVER_TO_PERSON_ID
101629781, --LOCATION_ID
101629781, --DELIVER_TO_LOCATION_ID
'FG', --SUBINVENTORY
46259, --LOCATOR_ID
rcv_headers_interface_s.currval, --Header_interface_id
'Y', --VALIDATION_FLAG
SYSDATE
Thank you,
Genoo
Edited by: Geno on May 25, 2013 4:54 AM

Any suggestion/advise please!
Thanks,
Genoo

Hyperlinks not working in PDF created from Word

I have created a Word document containing hyperlinks but when I print it to a PDF file (using Acrobat 7.0.9 on Windows Server 2003), the hyperlinks look OK in the PDF file but nothing happens when I click on them.
In Acrobat, under Edit > Preferences > Convert to PDF > Microsoft Office > Edit Settings, the "Add bookmarks and links to Adobe PDF file" option is ticked.
How can I get the hyperlinks to work in a PDF file created from a Word document?

The original post did not indicate the method of creating the PDF. The result that was obtained was what happens when you print to the Adobe PDF printer. To get the hyperlinks embedded in the PDF, you have to use the PDF Maker (create PDF in WORD 2007).

User does not appear in group created from SAP role

Hello --
I have a user that has logged into InfoView successfully with SAP authentication and is showing in the CMC under the "User List." When I view the list of users in the group that was created from the SAP role he was a part of, he is not there. When I go to the user account and view "Member of," the group IS shown in the list.
Any idea? Any way I can "refresh" the group or anything like that?
Thanks
Casey

Thanks for the replies.
We are on XI 3.1 FP1.8 and we do have a CMS cluster. Server reboots this weekend seem to have resolved the problem. I am curious why this question was asked, though:
"Did you reassign the user to another SAP role after the user has already logged at least once in the InfoView?"
Is this something that could have caused the problem or is it a possible workaround if we run into the issue again?
Thanks again...
Casey

Import Standard Purchase Order not picking data when submitted from backend

Hi,
As part of my code, I am inserting Purchase order information in the interface tables with process_code = 'PENDING'. Then using fnd_request , i am triggering the Standard Program for importing these Purchase Orders. The standard program is getting triggered and completing normally. But it is not picking any records. I am calling the program as follows:-
              -- Setting the org_id so that the import program will run for that particular org_id.
              fnd_request.set_org_id(r_org_id.org_id);
               -- Submit the Import Standard Purchase Orders by calling the standard program for respective org_id
              l_req_id := FND_REQUEST.SUBMIT_REQUEST(application => 'PO'
                            ,program      => 'POXPOPDOI'
                            ,description => 'Import Standard Purchase Orders'
                            ,start_time => SYSDATE
                            ,sub_request => FALSE
                            ,argument1 => NULL
                            ,argument2 => 'STANDARD'
                            ,argument3 => NULL
                            ,argument4    => 'N'
                            ,argument5    => NULL
                            ,argument6 => 'APPROVED'
                            ,argument7 => NULL
                            ,argument8 => NULL
                            ,argument9 => NULL
                            ,argument10 => NULL
              COMMIT;
When I am submitting this same program from front end, for the same set of records using the same set of parameters, the records are getting picked.
Any suggestions for this?

Hi
Do you have a copy of your insert statement?
regards

CS2 Eye dropper and clone tool not picking up correct colour from image.

Hello everyone, Can anyone help me please. I have an iMac with 0SX 10.4.4.
Plenty of Ram and hard drive space. In using CS2 the eyedropper and clone tools will not pick up the exact same colour from the image that I require. It is always lighter in shade and has on occasion been white. Any help in solving this problem will be much appreciated.
Yours in anticipation, Geoff Walter.

>The eyedropper is picking-up the color as rendered in RGB on your Monitor...
Really? Not from the pixels in the file? So the same pixels are reported with different values depending on monitor setup? This is about how the eyedropper reports pixel values, not about how they are rendered to the screen, is that correct?
Just to be sure here, this is so even with the eyedropper set to point sample?
Al
Edit: Or do you mean that this is a known problem with 0SX 10.4.4. and Photoshop, in which the values are picked up from the monitor and not from the file data?

Exchange sync not picking up appts created from Lotus Invitation

Similar Messages

Maybe you are looking for