Exchange TLS connection failing

Hello,
We have an Exchange 2003 SP2 server that up until recently was able to send encrypted messages to bankofamerica.com. Now the messages get stuck in the outbound delivery queue until they expire. I have confirmed that we are configured using all of the requirements
set forth by Bank of America but I still cannot get the messages through. I have successfully configured and sent out an email using TLS from our Exchange 2010 server, but need is to have the 2003 server send encrypted messages. Any assistance would be greatly
appreciated as I am starting to run out of ideas on what to check.
Thanks.

When integrate Lync and Exchange UM, you need to generate new certificate. The certificate should contain the server’s FQDN.
Lisa Zheng
TechNet Community Support

Similar Messages

In Firefox version 37.0 getting Secure Connection Failed config parameter version.fallback-limit set to 3. Does this support TLS 1.0 .

In FF 37.0 getting secure connection failed connecting to a website. Works fine in previous version. Config parameter version.fallback-limit default setting is 3. In previous version the default setting was 1. Does the setting version.fallback-limit to 3 mean only TLS1.2 is supported. Any help is appreciated.
Secure Connection Failed
The connection to xxxx.xxx.com was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
Thx,

The website may try to fallback to TLS 1.0 in a way that is no longer allowed in current releases or may be using a deprecated cipher suite.
You can open the <b>about:config</b> page via the location/address bar and use its search bar to locate this pref:
*security.tls.insecure_fallback_hosts
You can double-click the line to modify the pref and add the domain (full domain) to this pref.
If there are already websites (domains) in this list then add a comma and the new domain (no spaces).
You should only see domains separated by a comma in the value column.
See also:
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security

Eap tls authentication fails if bluetooth device connected

Hi All, I'm new to Macs but was tasked with getting a MacBook Air connected to our AD integrated, 802.1x wifi network. After a lot of trial and error with certificates I finally got this working but now have a rather bizarre problem. With the MBA on it's own it will connect to the wifi network, sucessfully authenticate and work perfectly well. However, if my Apple bluetooth mouse or keyboard are connected to the MBA the EAP-TLS authentication fails. A packet capture of the connection process shows that at the same point every time the process take a while then a packet shows as "Unknown Error Ignored", then loops thorugh the process. Turning off the keybpard and mouse at this point and the MBA will connect. Once connected I can then connect the keyboard and mouse and continue to stay connected for a while before, I assume, the AP forces a re-auth and the connection drops again.
Has anyone come across this elsewhere?
Thanks

I have a Macbook Pro Retina 15" from 2012 and it has the same issue. Running 10.8.4. I have spent probably 5-6 hours trying to troubleshoot cert's network settings, did a complete fresh install (then restored from timemachine when that did not work) with no luck this solution worked but obviously is not a real solution as it should not confilct in this way. Great job on finding a workaround! I will be contacting apple about this ASAP under my applecare.

Failed TLS Connection to alternate SMTP Destination

I have a typical Exchange 2003 environment, all outbound mail is directed to IronPort C100 for delivery. I have a need to encrypt some outbound email, and so I created a content filter that basically says if "secure:" is in the subject line, then send mail to alternate destination host. In testing this process, it seems as if all is well until ironport tries to contact the destination host. The mail log capture indicates the following:
Info: New SMTP ICID 4561477 interface in/out (10.0.0.20) address 10.1.1.70 reverse dns host moex.uhcu.net verified yes
Info: ICID 4561477 RELAY SG RELAYLIST match 10.1.1.70 SBRS rfc1918
Info: Start MID 1006256 ICID 4561477
Info: MID 1006256 ICID 4561477 From: <pgerdes>
Info: MID 1006256 ICID 4561477 RID 0 To: <pgerdes66>
Info: MID 1006256 Message-ID '<DB146C512E331D428A863D74E0DD9E8408916772>'
Info: MID 1006256 Subject 'secure:'
Info: MID 1006256 ready 9518 bytes from <pgerdes>
Info: MID 1006256 matched all recipients for per-recipient policy DEFAULT in the outbound table
Info: ICID 4561477 close
Info: MID 1006256 interim AV verdict using Sophos CLEAN
Info: MID 1006256 antivirus negative
Info: MID 1006256 queued for delivery
Info: DCID 361778 TLS success protocol TLSv1 cipher RC4-SHA smtp.perimeterusa.com
Info: New SMTP DCID 361778 interface 10.0.0.20 address 63.76.208.166 port 25
Info: Delivery start DCID 361778 MID 1006256 to RID [0]
Info: Bounced: DCID 361778 MID 1006256 to RID 0 - 5.1.0 - Unknown address error ('554', ['5.7.1 <pgerdes66>: Relay access denied'])
One caveat is that the email encryption provider can only provide instructions for setting up a TLS Connection directly from Exchange 2003 to their SMTP Gateway using a SmartHost connection, which requires a username and password. Do I need to configure a username/password and somehow insert that into the TLS session from IronPort to the alternate SMTP Host?

First let me say, I wish you would consider using the on-box IronPort/PostX email encryption available in the 5.5 release, in place of outsourcing this feature. I would be glad to demo this for you.
In any case, here is the solution to your problem: (details found in the “Outgoing SMTP Authentication” section of the Advanced User Guide – online help.)
Step 1) Create an Outgoing SMTP Authentication Profile (This is done under the Network -> SMTP Authentication menu.
Step 2) Add or Edit a SMTP Route for the IP address of the "alternate destination host" you are connecting to, set the outgoing SMTP Authentication to use the profile created in step 1).
Optional Step 3) email me and I can come by your office and help.
Erich Stokes
IronPort Systems Engineer
South Central Region, US
[email protected]
(Based in Austin, TX)

Exchange 2003 Removal fails w/ Error code 0X80072030 (8240): There is no such object on the server- pls read

Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010 => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server => successfully
6. Delete Routing Group Connectors to Exchange Server 2003 => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
                                "initials,displayName,physicalDeliveryOfficeName," & _
                                "telephoneNumber,mail,wWWHomePage,profilePath," & _
                                "scriptPath,homeDirectory,homeDrive,title,department," & _
                                "company,manager,homePhone,pager,mobile," & _
                                "facsimileTelephoneNumber,ipphone,info," & _
                                "streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
                                   strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
                objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
                objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB = NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
           Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
           Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
Alex

I kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex

Exchange 2010 Initialization failed (Initialization failed) The WinRM client received an HTTP server error status (502)

i have Server 2008 r2
exchange 2010 evrything was working fine but now when i try to open the Exchange management console i get this errore
the follwing error ocurred when serching for on premises exchange server
Connecting to remote server failed with the following error message:
The WinRM client received an HTTP server error status 502, from the remote ws-managment servic For more information, see the about_Remote_Troubleshooting Help topic. It was running the command
'Discover-ExchangeServer -UseWIA $true -SuppressError $true'.
please help
Mahmoud Hanefy

Anything in the event logs?
Any help from:
http://msexchangeteam.com/archive/2010/02/04/453946.aspx
Troubleshooting Exchange 2010 Management Tools startup issues

Could not establish TLS connection on port 7001 - "unable to get local issuer certificate"

tvcs: Event="Outbound TLS Negotiation Error" Service="SIP" Src-ip="10.0.7.168" Src-port="29127" Dst-ip="<Public IP>" Dst-port="7001" Detail="unable to get local issuer certificate" Protocol="TLS" Common-name="ewe.<domainname>.com" Level="1" UTCTime="2014-11-12 12:48:20,071" 2014-11-12T15:48:05+03:00
Getting above error on Expressway-C server while establishing TLS connection with Expressway-E in DMZ. I have enabled static NAT on Expressway-E and give the Public IP on peer address of Expressway-C. At that time, i was getting DNS resolution error on Expressway-C so we added a host record on local DNS for Public IP. Later, I created CSR from both Expressway C & E server and ask local microsoft team to issue Local CA certificates. After uploading, i was getting above error (Failed to establish TLS). Also i have uploaded company (wilcard) Public certificates (issued from Geotrust) and we are getting the samer error and Expressway server could not establish TLS connection on port 7001. Firewall connections are done and i double checked it.
Expressway ver 8.2

Yes, Exp-C > Peer Address (FQDN of Exp-E)
Certificate of Exp-E -> When generating CSR from Exp-E, automatically FQDN (Exp-E(hostname).domainname.com) will be shown. Then this CSR will be send to local CA or Public CA to generate a certificate. OR you meant to say in Exp-E CSR we need to add FQDN of Exp-C server also in alternative name and vice versa too.
Yes, root certificates & intermediate certificates are uploaded to trusted CA.

What do we change on windows server 2k8 iis7 to fix "Secure Connection Failed" that is appearing with version 37 and 37.0.1?

We host https://www.prereg.net and the recent updates (version 37 and 37.0.1) have caused a "Secure Connection Failed" message to appear. We have contacted our hosting company and our SSL provider (geotrust) and neither of them are able to help with this issue. Can anyone tell us what we might need to alter on our server in order to fix this issue? We have a valid certificate and we have SSL3 and TLS 1.2 enabled.
Thank you very much for your help

The browser console shows:
<blockquote>This site uses the cipher RC4 for encryption, which is deprecated and insecure.</blockquote>
*TLS_RSA_WITH_RC4_128_SHA
Attached screenshot from Nightly with domain added to security.tls.insecure_fallback_hosts
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security

BlueTooth File Exchange - cannot connect

Hi all i did a search and found some good starting places and yet i still have my problem:
Have been connecting to my cell phone flawlessly for file transfer via the "browse" menu, (a modded moto E815); recently had to do an Archive and Install, (which cleaned up a mess), and after everything was up and running, checked out BT File Exchange and it still worked flawlessly. A few days ago, i went to transfer a file and it starts, tries to connect, then i get the message: "Connection failed or closed". To add insult to injury, BTFE promptly crashes! Deleted pref files, made sure the Phone could connect via BT with other programs (which it does), and i don't have a clue... I tried reading the crash log file, and i can't make sense of it.... Any thoughts?
Thanks for taking the time. PS: I deleted the phone's profile, went through and paired it again with no joy.
Pismo G4/550;SuperDrive;BT Dongle;1GB RAM Mac OS X (10.3.9) upgraded CPU & Optical Drive!

Have you tried this already?
Follow the standard procedures for Mac OS X miracles:
Applications > Utilities > Disk Utility > select your start up volume > First Aid > Repair Permissions
Restart the your Mac with the Mac OS X installation CD or DVD (through holding the key C on the keyboard). There select your preferred language and then not install Mac OS X but go to the File menu and select Disk Utility. There select your normal volume > First Aid > Repair disk. Restart your Mac.
System Preferences > Users and hit the small "+" at the bottom to create a new user. Select Log out from the Apple menu and log in this new user.
If it worked in the new user, the problem is somewhere in a file in your users Library > Preferences folder.

Ipad network connection failed

My ipad has been extremley slow latley and whenever I open the internet or when its plugged into itunes it says either network connection failed or timed out. AND my wifi is on. Also my home button has been very sketchy lately. Sometimes it works and sometimes it doesnt.
Message was edited by: cookiecrumbs

Hi,
Tap Settings / General / Reset / Reset Network Settings.
Restart the iPad.
More help here for Troubleshooting Wi-Fi networks and connections
Also my home button has been very sketchy lately. Sometimes it works and sometimes it doesnt.
Probably a good idea to get that repaired. If you just purchased this iPad you have 14 days from purchase for an exchange or refund.
Carolyn
Message was edited by: Carolyn

CISCO IDS Socket Connect Failed [4,111]

i am working on cisco IDS 4250. its web server is running but still i am unable to get the device manager view in the remote browzer. there is also a problem in the following commands. when i typr the following command. error appear ..
sensor(config)#tls trusted-host ip-address ip
Error: Socket Connect Failed [4,111]
Similarly during ssh
sensor(config)#ssh host-ket ip
Error: Socket Connect Failed [4,111]
Plz Help. Thank u in advance.

The Cisco Intrusion Detection System (IDS) SSH (Secure Shell) error message can be caused by a misconfiguration of the Public Modulus field. The RSA algorithm uses the Public Modulus to encrypt data.
http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_installation_and_configuration_guide_chapter09186a008014f8cb

Trying to setup email account - getting "server connection failed"

I'm hoping someone out there can help me setup a POP account on my iphone. My host where the email account is based says it supports POP and/or IMAP, but I've tried to create a new account on the iphone with both methods and get the same message each time. The error says:
Server Connection Failed
The certificate for [email protected] may be invalid.
I just setup the same email account in my microsoft outlook and it works fine. Any thoughts???

Same problem here. We are running Exchange 2007 at my school and all I want is to get my mail sent to my iphone. I have no need to sync my iphone to my school computer.

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Exchange TLS connection failing

Similar Messages

Maybe you are looking for