Exchange Transport Service is not starting
Hi,
We stopped our exchange server machines. When we started it again Exchange Transport service is not starting. Can anyone help us in this regard?
Hi AneesurRehman,
Thank you for your question.
We could restart the service of “Microsoft Exchange AD topology ”,then manually start the Exchange Transport Service, if not, check if there are other Exchange services which were not started, we could start other Exchange service before we start Exchange
Transport Service.
If we didn’t start any Exchange service, we could check if there are any Event IDs in Application Log. I suggest we post Event Id to
[email protected] for our troubleshooting.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support
Similar Messages
-
Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MDHi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support -
Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically
Hello,
I am having an issue when I start my TMG 2010 machine:
(*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
The service "Microsoft Forefront Server Protection for Exchange Registration Service"
does not start, it is set to "Manual".
I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
Thanks in advance.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Hi,
Have you received any errors in event logs when
you started the Microsoft Forefront Server Protection for Exchange Registration Service?
Based on my research,
Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
down and does not need to be running for transport scanning to occur.
You can refer to the link below:
Services
Best regards,
Susie -
Exchange 2013 Services Will Not Start
Server is a new setup with Server 2012 Standard. Installed Exchange 2013. Got everything up and running correctly.
Installed MySQL in prep for another application that required MySQL. MySQL installed C++ 2010 and required CGI for IIS. E-mail immediately stopped flowing. Restarted the server and now to just get to the log in screen takes 30+ minutes and most of the Exchange
services fail to start.
I removed MySQL and the C++ 2010. Ran a repair on C++2012 and still takes forever to get to the log in screen and the Exchange services are still failing.
Any ideas on what is going on?
Level Date and Time
Source Event ID
Task Category
Error 11/7/2012 2:51:14 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:51:14 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:51:14 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Error 11/7/2012 2:51:14 PM
Service Control Manager 7031
None The Microsoft Exchange Frontend Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:51:06 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:51:06 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:51:06 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Error 11/7/2012 2:51:05 PM
Service Control Manager 7031
None The Microsoft Exchange Throttling service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Information 11/7/2012 2:51:01 PM
Service Control Manager 7036
None The Software Protection service entered the stopped state.
Error 11/7/2012 2:50:57 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:57 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:57 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Information 11/7/2012 2:50:56 PM
Service Control Manager 7036
None The Device Setup Manager service entered the stopped state.
Information 11/7/2012 2:50:56 PM
Service Control Manager 7036
None The Windows Modules Installer service entered the stopped state.
Information 11/7/2012 2:50:51 PM
Service Control Manager 7036
None The Portable Device Enumerator Service service entered the stopped state.
Error 11/7/2012 2:50:48 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:48 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:48 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Error 11/7/2012 2:50:47 PM
Service Control Manager 7031
None The Microsoft Exchange Throttling service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:46 PM
Service Control Manager 7031
None The Microsoft Exchange Mailbox Transport Delivery service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:39 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:39 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:39 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Information 11/7/2012 2:50:31 PM
Service Control Manager 7036
None The Windows Remote Management (WS-Management) service entered the running state.
Error 11/7/2012 2:50:31 PM
Service Control Manager 7031
None The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Error 11/7/2012 2:50:31 PM
Service Control Manager 7023
None "The Microsoft Exchange Information Store service terminated with the following error:
%%2414"
Information 11/7/2012 2:50:31 PM
Service Control Manager 7036
None The Microsoft Exchange Information Store service entered the stopped state.
Information 11/7/2012 2:50:31 PM
Service Control Manager 7036
None The User Access Logging Service service entered the running state.
Warning 11/7/2012 2:50:31 PM
Microsoft-Windows-WinRM 10154
None "The WinRM service failed to create the following SPNs: WSMAN/mail.XXXXXXX.net; WSMAN/mail.
Additional Data
The error received was 8344: %%8344.
User Action
The SPNs can be created by an administrator using setspn.exe utility."
Information 11/7/2012 2:50:31 PM
Microsoft-Windows-WinRM 10148
None "The WinRM service is listening for WS-Management requests.
User Action
Use the following command to see the specific IPs on which WinRM is listening:
winrm enumerate winrm/config/listener"
Information 11/7/2012 2:50:28 PM
Service Control Manager 7036
None The Software Protection service entered the running state.
Error 11/7/2012 2:50:28 PM
Service Control Manager 7031
None The Microsoft Exchange Throttling service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.It still applies to Exchange 2013 SP1 and Server 2012 R2.
Thank you so much. You really saved my day! -
Hi All,
After installing the lovely update (https://technet.microsoft.com/library/security/ms14-068) that Microsoft released last week. I restarted my exchange 2013 server and now the Microsoft Exchange Transport Service will not start. It is pretty much constantly
in a starting state. Tried all the standard stuff, restarting the server etc.
Running on Server 2012 R2
Hopefully someone can shed some light.
PeteHi,
A few questions here :
- Have you installed all roles on the same server ? ( MultiRole server )
- If yes, do use the preconfigured receive connectors from Exchange or did you add custom connectors ?
- Do you have any anti-spam service installed on the server that could be listening on port 25 ? -
Exchange Transport Service not starting
Hello All:
I have installed exchange server 2007 in my Windows Server 2008 domain.I have noticed that when I open up the services tab on my server and check the services which are running that the Information Store and Transport services are set to start automatically. However, they are not running. When I tell it to start the Information Store that service will start. When I tell it to start the Microsoft Exchange Transport service, I get the following message:
The Microsoft Exchange Transport Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. I know that this service must be running in order for me to send and receive mail. Can someone tell me how to troubleshoot and correct this problem. Thanks in advance for any and all responses to this question.
When I look in the event logs I see the following:Log Name: Application
Source: MSExchange TransportService
Date: 1/31/2009 10:43:05 AM
Event ID: 1016
Task Category: ProcessManager
Level: Error
Keywords: Classic
User: N/A
Computer: AESTONE.stone-and-stone.com
Description:
The worker process crashes continuously on startup: C:\Program Files\Microsoft\Exchange Server\Bin\edgetransport.exe. The service will be stopped.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange TransportService" />
<EventID Qualifiers="49156">1016</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-01-31T15:43:05.000Z" />
<EventRecordID>478666</EventRecordID>
<Channel>Application</Channel>
<Computer>AESTONE.stone-and-stone.com</Computer>
<Security />
</System>
<EventData>
<Data>C:\Program Files\Microsoft\Exchange Server\Bin\edgetransport.exe</Data>
</EventData>
</Event>
Any suggestions anyone?
Dear customer:
Did you upgrade a computer that is running Windows Server 2003 to Windows Server 2008?
If so, please refer to the following article to fix the issue:
Multiple Exchange Server 2007 services do not start when you upgrade a computer that is also running Windows Server 2003 to Windows Server 2008
http://support.microsoft.com/default.aspx?scid=kb;EN-US;951402
Also, check Exchange2007 Setup log file, if the error resemble the following words:
2/3/2007 1:07:16 AM] [2] [ERROR] Service 'MSExchangeTransport' failed to start.
Check the event log for possible reasons for the service start failure.
[2/3/2007 1:07:16 AM] [2] Ending processing.
[2/3/2007 1:07:16 AM] [1] The following 1 error(s) occurred during task
execution:
[2/3/2007 1:07:16 AM] [1] 0. ErrorRecord: Service 'MSExchangeTransport' failed to
start. Check the event log for possible reasons for the service start failure.
[2/3/2007 1:07:16 AM] [1] 0. ErrorRecord:
Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service
'MSExchangeTransport' failed to start. Check the event log for possible reasons for
the service start failure.
[2/3/2007 1:07:16 AM] [1] [ERROR] Service 'MSExchangeTransport' failed to start.
Check the event log for possible reasons for the service start failure.
[2/3/2007 1:07:16 AM] [1] Setup is halting task execution because of one or more
errors in a critical task.
[2/3/2007 1:07:16 AM] [1] Finished executing component tasks.
[2/3/2007 1:07:16 AM] [1] Ending processing.
Perform the following steps to fix the issue:
1. Open Registry on Exchange 2007 box.
2. Navigate to the following registry key:
HKLM\SYSTEM\ControlSet001\Services\Tcpip\Parameters
3. Right click Parameters,choose permissions,add explicitly the machine account Domainname\Exchange$ (Where Exchange is hostname for Exchange 2007 box) to the
Access control list by giving read access to it.(Exchange must be able to read this key to find the FQDN of the server so that the SPN can be registered).
4. Check the effect.
Rock Wang - MSFT -
SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please adviceThe Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Exchange information store service is not starting on exchange 2010
i've run the updates on the exchange 2010 and restart the servers, after one week i've restart the 2003 dc and exchange 2010. now exchange information store service is not starting on exchange 2010 and the database are dismounted
help plsI have just installed Exchange 2010 on my system and when trying to mount the database it fails. The Information Store service will not start on my server. Time is in sync with the DC and the initial install went fine. I have the following
from event viewer:
Cmdlet failed. Cmdlet Mount-Database, parameters {Identity=dellstslab}.
details
System
Provider
Name]
MSExchange
CmdletLogs
EventID
6
Qualifiers]
49152
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-02-18T16:43:34.000000000Z
EventRecordID
107
Channel
MSExchange
Management
Computer
Exchange2010.dellstslab.com
Security
EventData
Mount-Database
{Identity=dellstslab}
dellstslab.com/Users/Administrator
S-1-5-21-2431095704-2869583948-1116897492-500
S-1-5-21-2431095704-2869583948-1116897492-500
ServerRemoteHost-EMC
1412
14
00:00:01.1388073
View Entire Forest:
'True', Configuration Domain Controller: 'WIN-NVOVSE1R716.dellstslab.com',
Preferred Global Catalog: 'WIN-NVOVSE1R716.dellstslab.com', Preferred Domain
Controllers: '{ WIN-NVOVSE1R716.dellstslab.com }'
System.InvalidOperationException:
Couldn't mount the database that you specified. Specified database: dellstslab;
Error code: An Active Manager operation failed with a transient error. Please
retry the operation. Error: Database action failed with transient error. Error:
A transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 [Database:
dellstslab, Server: EXCHANGE2010.dellstslab.com]. --->
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException: An Active
Manager operation failed with a transient error. Please retry the operation.
Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable
to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException:
An Active Manager operation failed with a transient error. Please retry the
operation. Error: Database action failed with transient error. Error: A
transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
The system attendant service does not start either. Any ideas? -
SBS2011 - microsoft exchange transport service not installed
i have been having issues with SMTP and now with some changes advised I have lost the MS exchange Transport service all together - it is not listed under services!
how to I re-install just the transport service - and more - where did it go???
KArlHi:
Can't really tell from here what happened, but please review this article and let us know if it helps:
http://technet.microsoft.com/en-us/library/gg680345.aspx
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
Microsoft Exchange Transport Service has been stopped.
I changed out failing drives on a customers SBS 2011 which uses Intel Rapid Storage Technology. I saw that it had an option to email a failing condition to up to three addresses. I configured it but got the Could Not Connect error from the RST software.
I Googled the condition and determined that I needed to install another Receive Connector on a different port, which is what I tried.
I opened all of the receive connectors in the MS Exchange Console - Server Configuration - Hub Transport section. As far as I know I did not change anything there, I just looked and cancelled. None of the new receive connectors I configured worked., Everytime
one configuration made no difference I deleted the connector, re added a connector using different options and tried the RST email test again.
Getting nowhere, I deleted the last new connector I configured, Closed the Exchange management console figuring I had a job for some time in the future when things were slow.
This morning I get the call No e-mail, and found the Exchange Transport Service stopped. I restarted it, made sure it was set to automatic, and it ran for about 3 minutes and then stopped. Right now I am keeping my customer working by starting the service
every 5 to 10 minutes.
Since I am not going to stay here indefinitely restarting the service, I need help!
J R WeymouthThanks for the links, I'll check them out. I finally got an error from the logs, in fact there are so many errors in the log I don't even know which one to follow. It gets a cluster of errors every 5 minutes (6 errors one critical) but that is when the transport
is shut down. I am relaying the first message that comes up after I restart the transport.
Log Name: Application
Source:
MSExchangeTransport
Date:
9/16/2014 9:11:48 AM
Event ID: 17003
Task Category: Storage
Level:
Error
Keywords: Classic
User:
N/A
Computer: SBSSRVR2011.MyDomain.local
Description:
Sender Reputation Database: An operation has encountered a fatal error. The database may be corrupted. The Microsoft Exchange Transport service is shutting down. Manual database recovery or repair may be required. Exception details: Microsoft.Exchange.Isam.IsamDbTimeCorruptedException:
Dbtime on current page is greater than global database dbtime (-344)
at Microsoft.Exchange.Isam.JetInterop.MJetDelete(MJET_TABLEID tableid)
at Microsoft.Exchange.Isam.Interop.MJetDelete(MJET_TABLEID tableid)
at Microsoft.Exchange.Transport.Storage.DataTableCursor.DeleteCurrentRow()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeTransport" />
<EventID Qualifiers="49156">17003</EventID>
<Level>2</Level>
<Task>17</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-16T16:11:48.000000000Z" />
<EventRecordID>1141638</EventRecordID>
<Channel>Application</Channel>
<Computer>SBSSRVR2011.BainInsuranceAgency.local</Computer>
<Security />
</System>
<EventData>
<Data>Sender Reputation Database</Data>
<Data>Microsoft.Exchange.Isam.IsamDbTimeCorruptedException: Dbtime on current page is greater than global database dbtime (-344)
at Microsoft.Exchange.Isam.JetInterop.MJetDelete(MJET_TABLEID tableid)
at Microsoft.Exchange.Isam.Interop.MJetDelete(MJET_TABLEID tableid)
at Microsoft.Exchange.Transport.Storage.DataTableCursor.DeleteCurrentRow()</Data>
</EventData>
</Event>
J R Weymouth -
Hello
Have a strange problem that reoccurs every day. The following are recorded in the log.
7031
The Microsoft Exchange Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.7032The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange Transport service, but this action failed with the following error:
An instance of the service is already running.Any suggestions are welcome./Deland
/AndreasHere are the result from the level 5 logging. I Havent disabled the TransportAgent yet.
Log Name: Application
Source: MSExchangeTransport
Date: 2013-07-19 10:13:25
Event ID: 12025
Task Category: TransportService
Level: Warning
Keywords: Classic
User: N/A
Computer: XXXX
Description:
Transport service is disconnecting performance counters with process lifetime from their old process.
Followed by 32 events of 12028
Log Name: Application
Source: MSExchangeTransport
Date: 2013-07-19 10:13:25
Event ID: 12028
Task Category: TransportService
Level: Warning
Keywords: Classic
User: N/A
Computer: XXXX
Description:
The process with process ID 1100 is holding the performance counter configuration cache total requests Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062 from instance transportrules(B1D082BB) RefCount=0 SpinLock=0 Offset=3936
and category MSExchangeTransport Configuration Cache while running processes are: Processes running are:
6300 UMWorkerProcess
5312 Microsoft.Exchange.ServiceHost
1568 Microsoft.Exchange.Diagnostics.Service
2212 WMSvc
776 svchost
1760 MSExchangeHMHost
9808 MSExchangeDelivery
376 explorer
2252 Microsoft.Exchange.Directory.TopologyService
9436 rundll32
1752 nscp
2932 noderunner
6076 MSExchangeSubmission
7056 scanningprocess
1736 PccNtMon
1340 fms
4688 MSExchangeTransport
1732 Ntrtscan
2716 MSExchangeMailboxAssistants
548 winlogon
9016 TmProxy
348 svchost
2904 SMSvcHost
1524 inetinfo
8376 TMBMSRV
5264 MSExchangeThrottling
12552 powershell
4080 w3wp
1124 svchost
7688 svchost
12744 w3wp
332 smss
1316 svchost
13188 mmc
5772 ForefrontActiveDirectoryConnector
3080 HostedAgent
11364 conhost
3268 w3wp
1060 svchost
2924 noderunner
904 dwm
3856 w3wp
504 wininit
7200 Microsoft.Exchange.Store.Worker
1668 SMSvcHost
4832 MSExchangeFrontendTransport
2072 sftracing
4932 MSExchangeMailboxReplication
7192 Microsoft.Exchange.Store.Worker
6992 Microsoft.Exchange.UM.CallRouter
9640 w3wp
9204 svchost
3244 svcGenericHost
1200 Microsoft.Exchange.Store.Service
876 svchost
10724 rundll32
3040 conhost
2480 w3wp
5992 MSExchangeTransportLogSearch
596 services
12508 w3wp
2636 MSExchangeHMWorker
11892 taskhostex
4796 Microsoft.Exchange.Search.Service
3568 WmiPrvSE
12532 ServerManager
9564 msdtc
4352 Microsoft.Exchange.EdgeSyncSvc
2032 mqsvc
6560 scanningprocess
3404 TmListen
4384 updateservice
3004 scanningprocess
6744 umservice
1424 hostcontrollerservice
828 svchost
432 csrss
696 svchost
1284 spoolsv
8152 w3wp
3576 w3wp
1264 svchost
496 csrss
5928 Microsoft.Exchange.RpcClientAccess.Service
2972 noderunner
2380 conhost
604 lsass
6884 Microsoft.Exchange.Store.Worker
10056 WmiPrvSE
992 svchost
2764 noderunner
5324 msexchangerepl
4 System
3548 Microsoft.Exchange.AntispamUpdateSvc
2168 svchost
0 Idle
And 28 events on 106
Log Name: Application
Source: MSExchange Common
Date: 2013-07-19 10:13:29
Event ID: 106
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: XXXX
Description:
Performance counter updating error. Counter name is DataRow seeks total, category name is MSExchangeTransport Database. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance '_total' already exists with a lifetime
of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited.
at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
lifetime, Boolean& foundFreeInstance)
at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : System.ArgumentException: Process with an Id of 14868 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
6300 UMWorkerProcess
5312 Microsoft.Exchange.ServiceHost
1568 Microsoft.Exchange.Diagnostics.Service
2212 WMSvc
776 svchost
1760 MSExchangeHMHost
9808 MSExchangeDelivery
376 explorer
2252 Microsoft.Exchange.Directory.TopologyService
9436 rundll32
1752 nscp
2932 noderunner
10416 EdgeTransport
6076 MSExchangeSubmission
7056 scanningprocess
1736 PccNtMon
1340 fms
4688 MSExchangeTransport
1732 Ntrtscan
2716 MSExchangeMailboxAssistants
548 winlogon
9016 TmProxy
348 svchost
2904 SMSvcHost
1524 inetinfo
15116 conhost
8376 TMBMSRV
5264 MSExchangeThrottling
12552 powershell
4080 w3wp
1124 svchost
7688 svchost
12744 w3wp
332 smss
1316 svchost
13188 mmc
5772 ForefrontActiveDirectoryConnector
3080 HostedAgent
11364 conhost
3268 w3wp
1060 svchost
2924 noderunner
904 dwm
3856 w3wp
504 wininit
7200 Microsoft.Exchange.Store.Worker
1668 SMSvcHost
4832 MSExchangeFrontendTransport
2072 sftracing
4932 MSExchangeMailboxReplication
7192 Microsoft.Exchange.Store.Worker
6992 Microsoft.Exchange.UM.CallRouter
9640 w3wp
9204 svchost
3244 svcGenericHost
1200 Microsoft.Exchange.Store.Service
876 svchost
10724 rundll32
3040 conhost
2480 w3wp
5992 MSExchangeTransportLogSearch
596 services
12508 w3wp
2636 MSExchangeHMWorker
11892 taskhostex
4796 Microsoft.Exchange.Search.Service
3568 WmiPrvSE
12532 ServerManager
9564 msdtc
4352 Microsoft.Exchange.EdgeSyncSvc
2032 mqsvc
6560 scanningprocess
3404 TmListen
4384 updateservice
3004 scanningprocess
6744 umservice
1424 hostcontrollerservice
828 svchost
432 csrss
696 svchost
1284 spoolsv
8152 w3wp
3576 w3wp
1264 svchost
496 csrss
5928 Microsoft.Exchange.RpcClientAccess.Service
2972 noderunner
2380 conhost
604 lsass
6884 Microsoft.Exchange.Store.Worker
10056 WmiPrvSE
992 svchost
2764 noderunner
5324 msexchangerepl
4 System
3548 Microsoft.Exchange.AntispamUpdateSvc
2168 svchost
0 Idle
Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=59 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : queue(B351294)
RefCount=0 SpinLock=0 Offset=48552, categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 8(ED0419E7) RefCount=0 SpinLock=0 Offset=44384,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 6(ED0419E9) RefCount=0 SpinLock=0 Offset=40216,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 3(ED0419EC) RefCount=0 SpinLock=0 Offset=36048,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=3 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 1(ED0419EE) RefCount=0 SpinLock=0 Offset=31880,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=18 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat(B874BB3) RefCount=0 SpinLock=0 Offset=27712,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : inqueue(56145953) RefCount=0 SpinLock=0 Offset=23544,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=17 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : smtpin(81392C98) RefCount=0 SpinLock=0 Offset=19376,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : mail(7C6FB7CC) RefCount=0 SpinLock=0 Offset=15208,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=68 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : other(ADC98A1) RefCount=0 SpinLock=0 Offset=11040,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 4832, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4832 StartupTime: 130183498009738545, currentInstance : _total(CFBEE918) RefCount=1 SpinLock=0 Offset=32,
categoryName: MSExchangeTransport Database
Log Name: Application
Source: MSExchange Common
Date: 2013-07-19 10:13:31
Event ID: 106
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: XXXX
Description:
Performance counter updating error. Counter name is Transaction Durable Callback Count/sec, category name is MSExchangeTransport Database. Optional code: 1. Exception: The exception thrown is : System.InvalidOperationException: Instance '_total' already exists
with a lifetime of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited.
at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
lifetime, Boolean& foundFreeInstance)
at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : System.ArgumentException: Process with an Id of 14868 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
6300 UMWorkerProcess
5312 Microsoft.Exchange.ServiceHost
1568 Microsoft.Exchange.Diagnostics.Service
2212 WMSvc
776 svchost
1760 MSExchangeHMHost
9808 MSExchangeDelivery
376 explorer
2252 Microsoft.Exchange.Directory.TopologyService
9436 rundll32
1752 nscp
2932 noderunner
10416 EdgeTransport
6076 MSExchangeSubmission
7056 scanningprocess
1736 PccNtMon
1340 fms
4688 MSExchangeTransport
1732 Ntrtscan
2716 MSExchangeMailboxAssistants
548 winlogon
9016 TmProxy
348 svchost
2904 SMSvcHost
1524 inetinfo
15116 conhost
8376 TMBMSRV
5264 MSExchangeThrottling
12552 powershell
4080 w3wp
1124 svchost
7688 svchost
12744 w3wp
332 smss
1316 svchost
13188 mmc
5772 ForefrontActiveDirectoryConnector
3080 HostedAgent
11364 conhost
3268 w3wp
1060 svchost
2924 noderunner
904 dwm
3856 w3wp
504 wininit
7200 Microsoft.Exchange.Store.Worker
1668 SMSvcHost
4832 MSExchangeFrontendTransport
2072 sftracing
4932 MSExchangeMailboxReplication
7192 Microsoft.Exchange.Store.Worker
6992 Microsoft.Exchange.UM.CallRouter
9640 w3wp
9204 svchost
3244 svcGenericHost
1200 Microsoft.Exchange.Store.Service
876 svchost
10724 rundll32
3040 conhost
2480 w3wp
5992 MSExchangeTransportLogSearch
596 services
12508 w3wp
2636 MSExchangeHMWorker
11892 taskhostex
4796 Microsoft.Exchange.Search.Service
3568 WmiPrvSE
12532 ServerManager
9564 msdtc
4352 Microsoft.Exchange.EdgeSyncSvc
2032 mqsvc
6560 scanningprocess
3404 TmListen
4384 updateservice
3004 scanningprocess
6744 umservice
1424 hostcontrollerservice
828 svchost
432 csrss
696 svchost
1284 spoolsv
8152 w3wp
3576 w3wp
1264 svchost
496 csrss
5928 Microsoft.Exchange.RpcClientAccess.Service
2972 noderunner
2380 conhost
604 lsass
6884 Microsoft.Exchange.Store.Worker
10056 WmiPrvSE
992 svchost
2764 noderunner
5324 msexchangerepl
4 System
3548 Microsoft.Exchange.AntispamUpdateSvc
2168 svchost
0 Idle
Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=59 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : queue(B351294)
RefCount=0 SpinLock=0 Offset=48552, categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 8(ED0419E7) RefCount=0 SpinLock=0 Offset=44384,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 6(ED0419E9) RefCount=0 SpinLock=0 Offset=40216,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 3(ED0419EC) RefCount=0 SpinLock=0 Offset=36048,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=3 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 1(ED0419EE) RefCount=0 SpinLock=0 Offset=31880,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=18 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat(B874BB3) RefCount=0 SpinLock=0 Offset=27712,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : inqueue(56145953) RefCount=0 SpinLock=0 Offset=23544,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=17 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : smtpin(81392C98) RefCount=0 SpinLock=0 Offset=19376,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 10416, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10416 StartupTime: 130186952059962770, currentInstance : mail(7C6FB7CC) RefCount=1 SpinLock=0 Offset=15208,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 10416, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10416 StartupTime: 130186952059962770, currentInstance : other(ADC98A1) RefCount=1 SpinLock=0 Offset=11040,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 4832, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4832 StartupTime: 130183498009738545, currentInstance : _total(CFBEE918) RefCount=1 SpinLock=0 Offset=32,
categoryName: MSExchangeTransport Database
Then ESE Recovery starts on the Transport database.
/Andreas -
Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support -
Microsoft Exchange Transport service terminated unexpectedly
Hi All,
We have configured exchange 2013 in windows server 2012. From last two days exchange transport service getting stopped.
Microsoft Exchange Transport service terminated unexpectedly.
Log Name: System
Source: Service Control Manager
Date: 11/13/2014 1:10:28 AM
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: BMBPRMBX01.BMB.LOCAL
Description:
The Microsoft Exchange Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.Hi,
This issue may due to some of the corrupt message in the queue. Please try these steps to solve this issue.
Pause the transport service and let all the messaged go out.
When queue is empty, stop the transport service and go to the mail.que database in transport-->queue folder. Cut paste all the files from queue folder to some other folder as backup.
Now start the transport service, it will create a fresh mail.que database and observe if the service us crashing again.
In addition, please try to disable any AV software, sometimes it will cause Transport service corrupted.
Best Regards. -
I bought my IPad 2 from a friend. I have reset to clear all of his information out. I am trying to connect it to my computer to sync my itunes and I keep getting the message that my IPad can't be used because Apple Mobile Device Service is not started can anyone help with this?
I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes.
Maybe you are looking for
-
Error while Creating Java model
Hi, Im creating a java model for EJB DC so as to import it in web dynpro DC... Now im writing a command bean in which Im using DTOs from EJB project. but it is not able to organize any imports for it.. Also, it is giving error at line at CreateExcept
-
Transport Gateway doesn't appears to start web listener
Tried installing Transport Gateway 3.5 under CentOS 6.x. I can start the process and I see a couple of items in the process list for it, but I don't see anything listening on port 80 when looking at the output from netstat and, of course, dont' see a
-
The file "iTunes Library" cannot be read because it was created by a newer.
Hi experts, I wonder if someone out there can help me? I had a bit of a problem with my new iMAC and it had to go for a quick fix. Nothing was lost during the fix, no music, no photos, no programs, but when I now open iTunes I get the message +The fi
-
Release 11i to Release 12 upgrade or Re-Implement. Which is better?
Hi Customer, One of our customers has implemented Oracle Applications 11i (11.5.9) [Oracle Financials] on Linux (Single Node). They are planning to implement Oracle HRMS and also wants to upgrade to R12 and Oracle Discoverer 10g. They want to know wh
-
I have a Verzion iPhone 4s with iOS 7 installed on it and the friend my friends dose not seem like it is working, and it is when it is trying to find a certain person, it says location unavaiable, and the other person with the other iphone it friend