Exchange Upgraded But Still No Change

Hi,
As far as I can tell my exchange was upgraded to ADSL2+ back in 2010 yet I still appear to be on a upto 8mbps service.
I was able to accurately check my line length a while back and it's less than 800m. So it's a bit frustrating to be getting slower than achievable speeds.
Is there any chance this can be rectified?

Thanks for the quick response.
I'm not sure this can be fixed without the help of anyone at BT as my QOS/Line Profile will need to be amended.
Will post line stats when I get home.
Connected to NTE5 via x1 filter - this is the only socket in the property
No extension leads or Sky/Alarms etc
Clean dial tone
I have BT Vision
I have recently changed the HH for a netgear as the HH was intermittantly switching off. (which is there may be historic instability).
I don't have a problem with throughput (although it is lower proabably thanks to Vision). It's the Sync rate I have a problem with. I'm about 800m from the Exchange and synched at 8mbps.
I haven't recieved an email from BT about my exchange, I'm going off Sam Knows
ADSL status:Enabled as of 30/06/2001
ADSL Max status:Enabled as of 31/03/2006
SDSL status:Enabled as of 10/07/2005
21CN WBC status:Enabled
FTTC status:2013
Thanks Again.

Similar Messages

Exchange Upgrade but still no ADSL2+

Hi All,
I have had the your line has been upgraded email ect... so i have been trying to get it to connect at ADSL2+ modulation but no luck so far! I have been on the phone to BT help for ages to which they are sure ADSL2+ is enabled on my line.
I am still in the 10 day period but it has not once tried to coneect at ADSL2+!
Have i got no chance because of line stats or do i need to get hold of the right person at bt to get ADSL2+ sorted.
I have a billion 7800n router so it can do adsl2, adsl2+, g.dmt modulation etc... Best i can get is 2350kbps down and 412kbps up.
Any advice would be greatly received.
Cheers
Dean
ADSL Status
Parameters
DSP Firmware Version A2pB025f.d22k
DMT Status No Defect
Operational Mode G.DMT
Upstream 448
Downstream 2944
SNR Margin(Upstream) 13.0
SNR Margin(Downstream) 3.0
Line Attenuation(Upstream) 31.5
Line Attenuation(Downstream) 63.0
Exchange name: Measham
Exchange code: EMMESHM
Location: Leicestershire East Midlands
Postcode: DE127EG
Maps: Our map | Multimap | Streetmap
Serves (approx): 4,104 residential premises
189 non-residential premises.
Broadband availability overview
ADSL: Yes
SDSL: No
LLU services: Yes
Cable: No
Wireless: No
BT Wholesale information
ADSL status: Enabled as of 26/11/2003
ADSL Max status: Enabled as of 31/03/2006
SDSL status: Not available
21CN WBC status: Enabled
FTTC status: Not available

after getting the email about the upgrade it can be immediate/days/week/months before you are actually upgraded. you can try the uk sales 08007830056 to try and get it quicker but that will probably need you to agree a new contract. you can also try the mods http://bt.custhelp.com/app/contact_email/c/4951
with your attenuation and +2db after 21CN upgrade I will doubt if you get any speed increase but the new 21CN bring a more aggressive system on noise so what was a good line on adslmax is not necessarily a good line on 21CN.
you can check potential speed here remembering to add 2db to your existing 63db for 21CN adsl2
http://www.kitz.co.uk/adsl/max_speed_calc.php
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hello, i have updated my iphone 5 black 16 gb to ios 7 ios 7.0.2 (11a501) and my battery has become worse it gives 9 hours of usage with out doing anything, i have done everything i tried, not using my iphone as well but still no change at all!

hello, i have updated my iphone 5 black 16 gb to ios 7.0.2 (11a501) and my battery life of my iphone has become worse it gives 9 hours of usage with out doing anything, i have done everything every tip that is available online i had 3gs and 4s so i know how to save battry life,i even tried not using my iphone as well but still no change at all!. i have upadted to ios 7.0.3 then downgraded it , i thought battery may be an issue ,so i put brand new battery still no change , so what should i do ? , update to the latest version which is ios 7.0.4 or wait for the ios 7.1 , i was using iphone 4s running on ios 6.1 it gave me 3 days of battery timing , iphone 5 seemed to be very bad for me ,help ! ?
its facory unlocked btw

Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
Take a look at apps using your location service in privacy, it can cause battery draining.

I downloaded apps a few times but the icon was not there . I tried to restart the phone . But still , no changed . Anyone ?

I downloaded apps a few times but the icon was not there . I tried to restart the phone . But still , no changed . Anyone ?

Thanks! Actually, by trying another wifi site we have here at home, I was able to give it another try. For us though, it seems we have an internet problem unrelated to the ipad. We'll have to figure that out.

I ned help please, I am losing storage space on my iPhone 6 and I am not downloading anything nor upgrading but still my storage dwindles literally by the hour , does anyone know as to why and if so how to stop this please and thank you.

I ned help please, I am losing storage space on my iPhone 6 and I am not downloading anything nor upgrading but still my storage dwindles literally by the hour , does anyone know as to why and if so how to stop this please and thank you.

Did you tried any of these basic troubleshooting steps?
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252

I have a 2008 imac, and trying to use the latest iPhoto app. But it won't open. I have installed the library upgrade but still won't open?

I have a 2008 mac, and am trying to use the latest iPhoto app. But it won't open. I have installed the library upgrade but still won't open?

Why not? We can not see you so you have to give us details
Did you run the iPhoto Library upgrader after you installed it - if not backup your iphoto library and go to the utilities folder in your Applications folder and double click on the iphoto library upgrader and RUN i - then launch iphoto 9.6 to complete the upgrade
LN

BT Exchange upgrade - Homehub still shows as ADSL1...

Hi,
I've had an email last week saying my line would be upgraded today as the exchange has been upgraded. My router was reset earlier but my home hub stats still appear to be showing plain old ADSL. I was under the impression the modulation should show ITU-T G.992.5 and my upstream speeds would improve slightly, but everything seems the same as before. Do I need to do anything at my end for the changes to take place? The hub is a recently fitted 2.0A to replace a faulty 2.0B hub if that is of any help.
Regards
Mike
ADSL line status
Line state
Connected
Connection time
0 days, 0:29:59
Downstream
5,056 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
5.9 dB / 20.0 dB
Line attenuation (Down/Up)
48.0 dB / 28.5 dB
Output power (Down/Up)
19.8 dBm / 12.6 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
2453 / 0
CRC Errors (Down/Up)
36 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
11
Solved!
Go to Solution.

Hi, I did try a search but it seams that others with a similar issue resorted to contacting the mods to resolve this after being told various things. I'm trying to be patient, but after receiving another email this morning from bt...
Hello,
Good news
This is to let you know that we've now upgraded your line and you should now have an improved, more consistent broadband connection, and maybe a speed increase.
You can find out more at bt.com/networkupgrade
Which is great news but the router still shows ADSL Max even after a reset so I'm still not showing any benefits of the exchange upgrade. Has anyone else had this letter and what were your experiences in the upgrade process. There is a lot of confusion over this but I can't find anything definitive. Do I need to contact a mod or is the initial process for after the upgrade for the modem to have a number of successful days connection before it changes? I'm sure someone out there knows.
Thanks
Mike

Exchange upgraded but no ADSL2+

I can see quite a few threads like this so apologise for repeating but I've got nowhere calling BT and would really like to get ADSL2+ on my line.
My exchange (Radnage) has been upgraded to 21CN according to the BT Wholesale dsl checker but my router is connecting with G.DMT at around 8 meg with a noise margin of 11dB and attenuation 24dB. I've called BT twice asking to be upgraded but both times have been told to wait for an indefinite period of time. The second time I spent 20 minutes on the line just to be told what samknows has on their site. This worries me as it appears from other similar threads that the wait may be long indeed.
Cheers for any help.

once an exchange is upgraded it can take from a few days to several months before lines are moved over as they are moved in batches you may be able to jump the queue by recontracting but normally it is a matter of waiting for an email from BT (sent to your master BT email address ) to advise you when the change will take place
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How to tick field WEORA in ME_PROCESS_PO_CUST as default but still can change it later

Dear Gurus,
I want to ask something. I want to make WEORA field ticked as default in BADI ME_PROCESS_PO_CUST but it still could change throughout transaction on ME21N. I added the code on PROCESS_ITEM method, but everytime I made changes, like I untick WEORA, it will back to tick itself again.
I'm so confused, how could I do it?
If someone could give me some idea, I'll be really appreciate it.
Thank you
Best Regards,
Shirley Xiao

Last time I did it, I created a private instance attribute for the internal table (was kind of item number + action performed, where list of actions defined as constant attributes of the class) and I also created two private methods "check_action" which check if action was already executed on item with a READ TABLE, and "set_action" which APPENDs a record in internal table.
Regards,
Raymond

German language changed into english after upgrade but wont re-change

the option in settings is still on german but the whole iTunes is english after i upgraded to the 7.4.3.1 version.
whats that?

I need to be sure I haveunderstood correctly.
You know that if you go to Edit>>Preferences>General you can set your language, then you have to restart iTunes for the change to take effect.
So you have set you language to Genrman and it stays in English?
Something that has worked for someone esle is to do a repair install of iTunes.
Go to Control Panel>>Add remove programs.
Select iTunes and press Change. Then Choose repair.

'Upgraded' but still on plain old ADSL (G.992.1)

I received a service upgrade notice via e-mail way back in January, and on the appointed date my stable ADSL download speed duly increased from about 3 to just under 5 Mbits /sec.
However I notice from my Home Hub 2 Settings page that the connection is still ITU-T G.992.1, so despite an upload noise margin of 23.0 dB, upload speed is stuck at 448 Kbps.
What's happened? Why don't I have ADSL 2 or ADSL 2+?

if you received the email advising your exchange was being upgraded to 21CN in January I would have expected your connection to have been done by now. It does get rolled out in stages but 6 months is longer than I would expect.
try sending email to mods and see if they can help http://bt.custhelp.com/app/contact_email/c/4951
I would suggest you search the forum for 'upgrade problems' just so you are aware that it does not always go smoothly
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

ADF Faces RichTable doesn't validate but still display changed data

Hello,
I think I miss something in the ADF Faces lifecycle management. Can you help me?
In a adf faces/jsf page,
1- I have a RichTable which DataModel is based on a List<Department> stored in a managed bean (session).
2- I have a button "Cancel" with immediate=true partialSubmit=false (I don't use PPR) and an ActionMethod that does a few changes (not in the model) and return "success".
When I modify a value in the table (that has some af:inputText) and click on the Cancel button, the underlying List<Department> instance isn't changed (Which I expect because of the immediate=true property!). But the table still display the changes I've typed in the page. How can I reverse the data displayed in the table to before my change in the UI (in a simple manner)? What do I miss?
Best Regards
Gregory

Hi,
immediate = true makes sure that the component is evaluated before all the other. In addition the value change event fires before the model update to give you the opportunity to prevent the update. I don't know what your managed bean code is doing, but the fact that the table has the update indicates the RC table component to work properly. Your table model isn't updated, which I don't think will be automatic. So I assume you will have to access the current selected row, get the row object and pass it to the list for an update
Frank

Upgraded but still can't open file

I wanted to print a PDF file; it opens to a note that says i need to upgrade. I did follow the link and it says it is already in my downloads but I can't still open the PDF file.

Downloading Reader is one thing. INSTALLING it is another entirely. You NEED to run the installer form your downloads folder.

I have merged mobile me to iCloud but still cannot change preferences on my Mac Pro.

I had mobile me (family plan) and I upgraded to icloud last night. My phone and ipad are using iclould fine, but when I go to the preference pane in MAC OSX it still comes up with the screen that has the button that says "move to icloud" . If I hit that button it takes me to the mobile me find my iphone, then if I type my password it takes me to a page with a button that says Open icloud...which I do.....then it opens icloud. Seems to be ready to go but everytime I try to go to preferences it starts at the beginning all over again....anyone have any idea why this is happening?

LukeW wrote:
My phone and ipad are using iclould fine, but when I go to the preference pane in MAC OSX it still comes up with the screen that has the button that says "move to icloud" .
Your signature says you have 10.6.1 - is this correct? iCloud won't work on that, it requires 10.7.2. (If your signature isn't correct, please amend it - it makes a considerable difference to some answers depending on what system you have.)

I upgraded, but still get a warning for 2012 upgrade

i have upgraded to 2012, but I still get a upgrade warning ....

You may have a user agent that is corrupted and that identifies you as Firefox/3.5.14
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.14) Gecko/20101001 Firefox/3.5.14 (.NET CLR 3.5.30729)
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Exchange Upgraded But Still No Change

Similar Messages

Maybe you are looking for