Exchange Writer "Retryable Error"

Hi All,
I have server 2012 R2 and Exchange 2013 install, all fully updated. I get a retryable error on my
exchange writer which i cannot clear. A server reboot clears it but it fails as soon as I take a backup.
Any thoughts?
Thanks
Dave

Now this is interesting. You posted the exact same question to this forum a few hours ago and even marked the other one as answered. Maybe you thought you were trying to post to the forum listed in the reply you marked as the answer?
. : | : . : | : . tim

Similar Messages

Microsoft Exchange Writer State: [9] Failed Last error: Timed out

Hi,
We're running Exchange 2010 SP3 UR4
We're backing up using DELL Compellent Replay Manager. Works half the time. Geting "time out" errors on Microsoft Exchange Writer during the rest.
Event log shows event id 2003 and 2007 for ShadowCopy near the 45 seconds to 1 minute mark. It really looks like it's too busy to finish the job.
Error is recoverable. No action is taken and next snapshot can succeed.
I watched the server during a snapshot to see if resources are an issue but there was no spike in resources that was obvious to me.
Dell says its a Microsoft VSS issue but our VSS backups using Netbackup have no problem. They don't overlap, by the way.
Can Microsoft VSS be tweaked if I'm getting a timeout error on Microsoft Exchange Writer?
thanks,
rudif

Hello,
Please post the detailed error information and check if there is any other related warning or error.
According to your description, the issue seems to be backup software. But I still recommend you run the command "VSSadmin list writers" to check Exchange writer state. If the Exchange writer is not in stable state(such as "Retryable error" state), please
try to restart information store service to check the result again.
Please try to refer to the following blog to troubleshoot VSS Backups issue. (Please Note:Based on my known, it also applies to exchange 2010.)
http://blogs.technet.com/b/exchange/archive/2008/08/25/3406172.aspx
Cara Chen
TechNet Community Support

System State Backup fail. Writer name: 'NTDS' : State: [11] Failed : Last error: Non-retryable error

Hello!!! Everybody,
I have Win Server 2008 R2 contain Domain controller (No Hyper-V). I have to take "SYSTEM STATE DATA BACKUP". I have ran following command on this Server.
c:\>wbadmin start systemstatebackup -backuptarget:d:
but backup was not successful & I got following error in command prompt.
" A VOLUME SHADOW COPY SERVICE OPERATION HAS OCCURRED : <0X800423f4>. THE WRITER EXPERIENCED A NON-TRANSIENT ERROR. IF THE BACKUP PROCESS IS RETRIED,THE ERROR IS LIKELY TO REOCCUR."
I also ran following command to know exact problem.
c:\>vssadmin list writers
I got following error
Writer name: 'NTDS'
   Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
   Writer Instance Id: {21c57902-5037-467b-b9a3-72ed41c9723e}
   State: [11] Failed
   Last error: Non-retryable error
I also checked Event Viewer & got following 3 noserror.
(1) Event ID : 8229, Source : VSS
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely reoccur.
Process ID : 608
(2) Event Id : 412, Source : ESENT. Task Category: Logging/Recovery
lsass (636) Unable to read the header of log file "\\?\Globalroot\device\harddiskvolumeshadowcopy2\Windows\NTDS\edb.log".Error:546
(3)Event Id : 521 Source : Backup
The backup operation that started at '‎2014-‎05-‎13T01:44:31.444000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review
the event details for a solution, and then rerun the backup operation once the issue is resolved.
I have also restart the server but problem is not resolved. I have no SQL in my Server.
I also re-register the VSS components with the help of following website.
Website Link : https://kb.acronis.com/content/45776
You are requested please solve my problem on very urgent basis.

You can refer below link for your issue
http://waynestorey.com/blog/2012/01/18/windows-backup-fails-with-event-id-521-error-code-2155348129/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

ST2540 retryable error

Hi ,
I have a single path connection to ST2540 with host running solaris 9 and the host type set to solaris (with Veritas DMP or other) .
The following error were encountered when access the volume on ST2540 . However there seem to be no
harm to the application . What could be possible go wrong ? Could it be that i should set the host type
to solaris (with traffic manager ) ??
root@test:/]tail /var/adm/messages
Feb 5 14:11:29 test scsi: [ID 107833 kern.notice] Requested Block: 114301872 Error Block: 114301872
Feb 5 14:11:29 test scsi: [ID 107833 kern.notice] Vendor: SUN Serial Number: g , K x
Feb 5 14:11:29 test scsi: [ID 107833 kern.notice] Sense Key: Unit Attention
Feb 5 14:11:29 test scsi: [ID 107833 kern.notice] ASC: 0x8b (<vendor unique code 0x8b>), ASCQ: 0x2, FRU: 0x0
Feb 5 14:11:30 test scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/SUNW,emlxs@1/fp@0,0/ssd@w202400a0b867fe90,1 (ssd1):
Feb 5 14:11:30 test Error for Command: write(10) Error Level: Retryable
Feb 5 14:11:30 test scsi: [ID 107833 kern.notice] Requested Block: 114301872 Error Block: 114301872

If you have a dual controller and only connect one fiber to one controller, this is a bad configuration which will lead soon or later to complications. For example you won't be able to upgrade the controller firmware online.
The asc/ascq 8b/02 you get in the events mean that your server was accessing the lun 1 through the alternate controller and the controller returning these events is quiescing the io due to the internal volume failover.
I would strongly suggest you to:
- connect both controllers to the server
- if this is a solaris server, enable mpxio (see the doc for the procedure)
If you need a more detailed explanation, please log a service request with us and provide us with a supportdata from this array as well as an explorer from the server.
Regards

Increasing Microsoft Exchange Writer timeout

Hello,
I am hoping if someone could tell me if it is possible to increase the timeout on the Microsoft Exchange Writer? I recently started having problems with backups where the writer is timing out. And my transaction logs are not getting truncated as a result
when backups are taken. I have read online that supposedly the writer is hard coded to a 20 second timeout but I am hoping that is not the case. And that I can somehow via the registry increase the timeout to say a minute.
Since when I have reviewed event viewer the logs seem to show things try to kick off a second or two after the 20 second timeout passed. So if I can increase the timeout that would
solve my issue. I currently run Veeam to backup my Excahnge 2010 databases. And it had been running for the last 2 years without a problem it was only in the last month where a problem developed with the writer. I am not totally sure what changed to suddenly
cause the problem as I have not done any recent patches to my Exchange 2010 setup nor to Veeam. I am running Exchange 2010 SP3 Rollup 6 on all of my Exchange servers in my environment.

Hi Nicholas,
I suggest install this hotfix for testing.
Backup task fails with a time-out error in Windows
https://support.microsoft.com/en-us/kb/2996928/en-us?wa=wsignin1.0
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Saving messages to exchange online script error

Hello All,
I am working on a script to Upload EML messages to Exchange online, the script works fine if you are going to upload single EML message, but if you tried to loop through the EML messages (10,000) you will get an error
"Exception calling "Save" with "1" argument(s): "This operation can't be performed because this service object already has an ID. To update this service object, use the Update() method instead."
and if you used the Update() method you will get this error
"Cannot convert argument "conflictResolutionMode", with value: "AAMkADQzYzJlYmY4LWQ0MTktNDI1OC1hMzk5LTU1NjY4MzEyZDllYQAuAAAAAAC9KBW4BKndR6JlMKNDzhBDAQB8rggXOc1YSrfw79e+XiMYAAAAxmsZAAA=", for "Update" to type
"Microsoft.Exchange.WebServices.Data.ConflictResolutionMode": "Cannot convert the "AAMkADQzYzJlYmY4LWQ0MTktNDI1OC1hMzk5LTU1NjY4MzEyZDllYQAuAAAAAAC9KBW4BKndR6JlMKNDzhBDAQB8rggXOc1YSrfw79e+XiMYAAAAxmsZAAA=" value of type
"Microsoft.Exchange.WebServices.Data.FolderId" to type "Microsoft.Exchange.WebServices.Data.ConflictResolutionMode".
I tried to make 1 save action and then update but also i failed
could you help please
$UserName = "[email protected]"
$Password = "password"
$secpassword = ConvertTo-SecureString $Password -AsPlainText -Force
$adminCredential = New-Object -TypeName System.Management.Automation.PSCredential -argumentlist $UserName,$secpassword
If(Get-PSSession | where-object {$_.ConfigurationName -eq "Microsoft.Exchange"}){
write-host "Session Exists"
else{
$rpRemotePowershell = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -credential $adminCredential -Authentication Basic -AllowRedirection
$importresults = Import-PSSession $rpRemotePowershell
$dllpath = "C:\Program Files\Microsoft\Exchange\Web Services\2.0\Microsoft.Exchange.WebServices.dll"
[void][Reflection.Assembly]::LoadFile($dllpath)
$service = New-Object Microsoft.Exchange.WebServices.Data.ExchangeService([Microsoft.Exchange.WebServices.Data.ExchangeVersion]::Exchange2013)
$windowsIdentity = [System.Security.Principal.WindowsIdentity]::GetCurrent()
$sidbind = "LDAP://<SID=" + $windowsIdentity.user.Value.ToString() + ">"
$aceuser = [ADSI]$sidbind
$service.Credentials = New-Object System.Net.NetworkCredential($username,$password)
$service.AutodiscoverUrl("[email protected]" ,{$true})
$MailboxName="[email protected]"
$folderid= new-object Microsoft.Exchange.WebServices.Data.FolderId([Microsoft.Exchange.WebServices.Data.WellKnownFolderName]::Inbox,$MailboxName)
$Inbox = [Microsoft.Exchange.WebServices.Data.Folder]::Bind($service,$folderid)
$emUploadEmail = new-object Microsoft.Exchange.WebServices.Data.EmailMessage($service)
$EMLsFiles = Get-ChildItem -Path "D:\Temp_Files\" -Recurse
Foreach ($EMLItem in $EMLsFiles){
[byte[]]$bdBinaryData1 = [System.IO.File]::ReadAllBytes($EMLItem.FullName)
$emUploadEmail.MimeContent = new-object Microsoft.Exchange.WebServices.Data.MimeContent("us-ascii", $bdBinaryData1);
$PR_Flags = new-object Microsoft.Exchange.WebServices.Data.ExtendedPropertyDefinition(3591, [Microsoft.Exchange.WebServices.Data.MapiPropertyType]::Integer);
$emUploadEmail.SetExtendedProperty($PR_Flags,"1")
$emUploadEmail.Save($Inbox.Id)

Hi,
According to your description, I understand that failed to batch import EML file to Exchange Online, however it works fine when import only single one EML file.
If I misunderstand your concern, please do not hesitate to let me know.
We can use EWS to batch import .eml and .ics file to Exchange server. More details about Import items by using EWS in Exchange, for your reference:
https://msdn.microsoft.com/en-us/library/office/dn672319(v=exchg.150).aspx#sectionSection3
For your question, it may be related to script of Exchange server. I recommend you to contact Scripting for Exchange Server Team so that you can get more professional suggestion, please refer to:
https://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx?f=255&MSPPError=-2147217396
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

"write medium error" when trying to burn a music cd

i've tried a few different times to burn a cd on my itunes and the same thing happens every time: i insert a black disk and my computer begins to make a noise that sounds not unlike grinding. the progress bar at the top of the itunes box says it is checking the songs, then initializing the burn, which it does for a couple minutes. then it says it is finalizing the burn, and spits the cd back out at me. a message then pops up on the screen which tells me that the cd was unable to burn because of a "write medium error." any help in this area will be greatly appreciated.
p.s. i also tried downloading and installing the new itunes, as well as restarting my computer, all with the same effect.
p.p.s. i'm using a macbook pro.

seenabeena,
Same exact thing was happening to me and was very frustrating. I was able to burn anything on from my itunes and then for whatever reason I started experiencing the same issues you are having. Don't know why it made a difference but someone here suggested using different brand of CD's. Guess the cheaper CD's are harder to read when it comes to the laser calibration. This isn't a endorsement at all but seems I've been able to burn anything again on the "imation" brand CD blanks. I hope this helps. Also, make sure you don't burn at anything higher than 8X when you start.
Carl

Write Back Error in OBIEE 11.1.1.7.150120

Hello everybody,
i have a problem with the writeback capabilities of OBIEE 11.1.1.7.150120.
After the Migration from 10g to 11g i would like to customize the write back in 11g. I go like Oracle BI Practice: OBIEE 11g Configure Writeback this, but getting an OBIEE error:
"Write Back Error
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator."
The table does not have any constraint. I would like to insert for example the value "2".
In my table properties i fill in "filling".
My ...\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes\customMessages\writeback.xml looks like that:
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="filling">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert>
<update>update analyticmodel.last_runtimes set laru_exec = @1, laru_runtime_start = sysdate </update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="machine_filling">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert>
<update>update analyticmodel.machine_filling set mf_mach_id = @{c0}</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Thank you very much
Best regards
Christian

Hi Cristian,
You must use '' at script when call some column value. (use '@1' instead of @1)
Tip.. note you can use your "WebMessage Name" (from your script, like "filling", "machine_filing") into your analisys.
Hope this help
Felipe Idalgo

Premiere Elements 11 Download - Write Disk Error

Hello,
I purchased Adobe Premier Elements 11 from Amazon.com the day before yesterday and keep getting a Write Disk Error during the download. I have tried repeatedly to download, and to 2 different computers but have gotten this error (and 'invalid checksum' which went away after the first couple of tries; I also turned off this check in the Disk Utility). In between download attempts, I move the downloader file and the incomplete Premiere 11 folder from the desktop of my MacBook Pro to trash, dump it, and restart the computer. I was able to successfully download and install Adobe Photoshop Elements 11 on both laptops so the problem is not the internet connection or the computers. Anyone know how to fix this problem?
Thanks!
Roma

Nobody can know. It's most likely some indexing process/ tool or a backup like TimeMachine that all too eagerly inspects the files before they finish downloading and damges them in the process. Turn off any such stuff. You might also consider using otehr browsers. Safari is just completely awful and often damages files.
Mylenium

IPod won't sync, gives 'Delayed Write Failed' error.

I've had my iPod classic 80gb, for roughly a year now, and I never really had any permanent issues with it, until last week. I plugged it into my laptop and left it on over night. I wake up in the morning and all my songs and videos were gone. iTunes was reading the data as 'Other'. Overnight, without me doing a single thing, everything was gone. I unplugged it and plugged it back in, and all the files were gone. Completely. Space had been returned.
I painstakingly put my songs back in that afternoon. The next day, I plugged the ipod into my office computer, and tried to sync my podcasts. After syncing about 20 files, iTunes froze. Then a yellow bubble popped up saying 'Delayed Write Failed' after which it wipes out everything I was able to sync.
I've done everything, from restoring the ipod, to re-installing iTunes to formatting the disk to straight up performing a chkdsk. As i speak right now, my laptop won't boot up after i performed the last chkdsk, which told me i had a bunch of invalid sectors or some other. For one week, I've searched the net and it seems no-one has a solution to this.
Any help? I don't have an Apple store in my country, and I don't want to believe that i have to get a replacement.

1st - Sorry I can't help you.
I also have iPod Classic 80gb and have had no trouble till two days ago (11/08). I connected my iPod and it showed up as a source in iTunes but none of my music was shown. I reconnected it and same thing, I checked for update for iPod but it said it was up to date. I then used iTunes to restore my iPod to factory settings. It went through the process and restarted but after that would never show up as a source in the iTunes window.
When I connect the iPod to my PC it detects the USB Device as an iPod right way (so it doesn't seem to be a USB Driver issue) but then the "Auto-Play" window shows up and it makes my PC slow way down and then eventually I see the "Windows Delayed Write Failed" error mesage in the task bar. If I check My Computer it shows the iPod as a drive.
I've done everything listed in Apples Support Page for this, from restoring the iPod, to re-installing iTunes, clearing temp folder and old registry files, updating iPod Service in MsConfig. I have also tried to sync the iPod with my other PC and see the same error so it seems the iPod is corrupted. I don't know anyway to restore factory settings again since it won't show up in iTunes anymore. I've searched the net and it seems no-one has a solution to this.

OBIEE 11G Write Back Error

Hi All:
I am testing the OBIEE 11G write back function. After all the steps , there's an Error message said "Write back Error" . No other detail information. Do you have any idea about where's the problem of it?
My xml file was under the folder of 'C:\OBIEE11\Oracle_BI1\bifoundation\web\msgdb'. and the detail is as below.
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="write_back_test">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert> <update>FACT_Writeback set MAX_LY2 = '@{c1}' where PERIOD_KEY = '@{c0}'
</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Really Thanks for your help.
Sunny.Sun

Hi,
I think these is a problem with your connection pool name, please check it. It's a name of connection pool in BI administrator.
if it's not problem, Can you try my way, replace '@{c1}', '@{c0}' by @1, @2...with 1,2 is a number of column in Criteria.
It's my template :
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="SetQuotaUseID">
<XML>
<writeBack connectionPool="WB_CONN">
<insert> </insert>
<update>UPDATE biee_map_revenue SET DIST_CODE=@5 WHERE REV_ID = @1 </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Edited by: OBIEE.vn on Feb 13, 2011 6:31 PM

Write Permission Error Save for Web Adobe CC 2014

Upon downloading and installing the recently released CC '14 apps, I've run into a problem with Photoshop CC 2014.
When I click "save for web" in the file menu, it returns an error message of "The operation could not be completed. A write permissions error has occurred."
It seems like a standard permissions error, so I repaired disk permissions, removed plists and prefs from user library, eventually I uninstalled photoshop and reinstalled it, restarted the computer, all with no progress.
I found another forum for CS5.5 that had a similar issue - with it's resolution being a permissions change on the preferences folder itself. For kicks, I tried this - again no progress.
I need to use the save for web feature. It is not usable on my end. Let's figure this out.
System Specs
Late 2013 iMac 27''
3.5GHz Intel Core i7
32GB 1600 MHz DDR3 RAM
NVIDIA GeForce GTX 780M 4096MB
3.11 TB Fusion Drive
Adobe Photoshop CC (2014)
20140508.r.58 x64

I had the same problem. And, I could not migrate settings. I found another thread about the same problem that suggested reset preferences on Photoshop launch, but that didn't work. the post also suggested to reset permissions for the library preference folder. Mine was fine.
But to fix it I had to go to the main library Preferences folder and reset permissions for the Photoshop CC 2014 Paths file and Photoshop CC 2014 Settings folder.
I am disappointed that Adobe shipped an upgrade with such a fundamental flaw. I feel I should say something disparaging and derogatory about Adobe quality control, about how as a loyal customer, using Photoshop since version 2.5 and a CC subscriber I expect better. But, I'll leave those remarks to others.

Using Photoshop CC I cannot save images to folder from Camera Raw as Tif. I get message 'write permission error'. I am using Widows 7 Professional.

I have just changed to Photoshop CC from CS4 and cannot now save images from Camera Raw. I get message 'write permission error'. I assume there is some permissions setting which did not exist with CS4.
I cannot progress unless I revert to CS4. What am I failing to do?

See if the suggestions, here, help, although this was back with CS6-cloud, not CC, so may not apply 100%:
http://forums.adobe.com/message/4758115
I'd suggest that rather than deleting the file, you move it out of the folder to somewhere else, in case things get worse and you need to put it back.
I found this by Googling the error message.
If you can't figure it out, you might post in the "Downloading, Installing and Set Up" or "Adobe Creative Cloud" forums since it seems to be related to the Cloud updates, and not necessarily ACR plug-in functionality, and I've seen India support people actually tackle problems posted there, which rarely happens in the ACR forum, although an ACR engineer may sometimes pop in to answer questions, they'd be less likely to know how to fix deployment issues.

Writer initialisation error ! has this been resolved in CS3

I can not encode a wmv from CS3 (since installing CS4) without getting the "writer initialisation error " message.
Has there been any resolution to this issue or any one know a fix.?
I do not wish to continually export an avi then create a wmv from that in Adobe Media Encoder(CS4) or MS Media Encoder.
I know that works but the workflow is time consuming ,tedious and in efficient when all I want is "quick and dirty" preview wmvs direct from the timeline as I used to be able to do.
Sidenote. This forum setup continues to be dire and unpleasant to use since it changed !. Anyone having any sort of decent experience with it? (How?)

Thanx.Hunt
After posting this morning, I discovered another little workflow that may help someone in this situation.
The CS4 Media Encoder (standalone) will import a Sequence from a CS3 Premiere Project and export whatever...
This at least saves the intermediate "Movie" File.
Simply Add the Project to the A M Encoder and choose the sequence. (surprisingly...it works!)
I guess that will have to do meantime.
re the Forum...I have deliberately stayed away until now because of the frustration involved. Only popping in on occassion to see if there are any signs of a CS4 update/fix/repair. (I do not use the CS4 Premiere component at all now and wait patiently to see if they can even repair it at all)
I do not know how anyone has the patience to come here and contribute while this site is in such a state!

"Unable to save the raw conversion settings. There was a write permission error."

I just built a new workstation for processing photos using PS CS5. I use external drives to store my images as I find it easier for backing up as well as for when I want use my laptop for sorting, etc.. I copied over all my old "Collection" files, and of course, had to "fix" them once on the new machine. Once pointed in the right direction, the collections all fill out correctly.
When I go to process a collection though, I encounter an odd problem I can't seem to sort out. I can delete files, rename files, copy/paste to the external drives, etc.. What I can't seem to do is add Labels, Ratings, or modify RAW settings. I mean, I can use ACR to make adjustments, I just can't seem to save them.
The system just ignores label, rating commands completely. When I try to save an ACR adjustment I get this error. "Unable to save the raw conversion settings. There was a write permission error."
The files are NOT write protected. I'm set up as the owner of my workstation, with complete control of the system. I can't seem to find any useful information about this error because the "write permission error" seems to only be happening on installs, so that's all I can find help for.
My system:
Intel Core i7 970@ 3.20GHZ
24.0 GB RAM
64-bit OS - Windows 7 Pro
DX58S02 Motherboard
NVIDIA GeForce GTX 580

Thanks for replying. I've been going crazy trying to fix this.
To answer your first question; I use sidecar XMP files. If everything from my archive was shot in RAW I'd try converting to DNG and see if embedding the changes directly in a file worked. Unfortunately, a lot of my old stuff was shot in JPG, so sidecars seems to be the best choice.
When I add labels, ratings, as well as change RAW settings on files I place on my workstations HD everything works. It's only when I try to do these things with the same files on removable drives that I run into trouble. The drives I use are Transcend 640GB StoreJet 25ms connected via USB.
I don't think it's a UAC problem. At least, to my understanding, doesn't that control how your machine alerts you to program changes? I looked into how to change ownership, and did so, but that didn't work. Here's a link to what I mean: http://www.addictivetips.com/windows-tips/windows-7-access-denied-permission-ownership/
I'm stumped. I also hate the idea that I'll have to go through various folders to find images from already created collections, copy them to a new folder on my HD and then work on them. Then I'll have to put them all back... ugghhhh

Exchange Writer "Retryable Error"

Similar Messages

Maybe you are looking for