Exchanging iPhone multiple times?
Has anyone here done multiple exchamges at the Apple store? Reason I am asking is that both my first iPhone 4 and the exchanged one seem to have a more prinounced antenna issue than my wife's iPhone4. The latest one they gave me has a reddish cast on the screen as well.
I am thinking about going to another Apple store and try to have it exchanged again. Would this store know I already did an exchange for the antenna issue at another location?
Yes, I've been through 4 iPhone 4's!
The problem isn't the phone, it's the software. Since I got this last phone yesterday I decided NOT to update it to the 4.0.1. And honestly my cars are clear, no dropped calls, signal is awesome.
just don't upgrade when you get a new phone. all my phones left Apple Store working great until I decide to upgrade it.
just my 2 cents. Wait until you hear good news about the next update, if not then keep the 4.0, its not going to kill anyone.
Similar Messages
-
I have registered my iPhone multiple times, but registration keeps popping up
Every time I plug my iPhone 4S into iTunes (Windows 7 64bit) it asks me to register my iPhone. I go through the registration, submit it and it is successful. But the next time I plug it in, the registration screen returns and I go through the whole process again. I have probably done this five times now. Anyone else out there experience this?
I am experiencing the same issue with my iPhone 4. I am also on Win7 64x. I have wireless sync setup so everytime I close iTunes it will open back up after a few minutes asking me to register again. I have tried registering multiple times, but it keeps aksing me to do it over and over again.
-
Facebook contiunes to download for iphone multiple times
have downloaded the application for facebook for my iPhone. I was able to properly sync it to my computer. But When accessing facebook from a pc it says that I have added the facebook for iTunes multiple times. I think it is happening each time I log into facebook from my phone, does anyone know how to stop this from happening??
I'd like to have an answer to this issue also. My friends are all complaining that they keep getting notifications about me adding the facebook app to my iphone. I don't know how many of those messages I've already deleted from my account.
-
Outlook 2013 asks for credentials connecting to Exchange 2010 multiple times
I'm having a problem with Outlook 2013 asking for my credentials a few times a day for no apparent reason. Some info on my setup...
CLIENT
Windows 7 Professional SP1 64 bit, fully patched
Office 2013 Pro Plus 32 bit, fully patched (has there even been any patches released yet?)
Outlook auto-configured to Exchange during setup.
Online Archive setup with server
Connected via gigabit ethernet on same network and domain as Exchange server.
SERVER
Exchange 2010 SP2, fully patched.
One server, holds all roles.
I have zero clue as to why I'm getting popped for credentials. This did not happen prior to my upgrade to Office 2013. I was previously using Office 2007 Pro Plus.
My credentials are always accepted, never a problem putting them in.
Thanks in advance!I have been testing and testing also for days, then waiting for any responses to other people's questions on other places as well.
After some time started my own tries again.
Now I fixed my issue - don't fully comprehend it. But anyway here comes the solution that worked for me (and hopefully for more of y'all)...
Go to the Exchange account from within Outlook, click special settings, tab connection. Open up the button proxy settings, UNtick options 3 and 4 (connections with HTTP/then TCP/IP). Make sure to UNtick both.
Press OK, Hit Save and OK again. Press NEXT and close the screens.
Logout from Outlook. LOG OFF your RDP session if you're in one. Restart the RDP session after some 15 seconds. Or start Outlook if you were only in Outlook.
My issue was then solved. -
I've tried to restore my iphone multiple times and the white bar won't go across
Including last night, I've been sitting at my computer for at least 6 to 7 hours...
Saturday morning, I woke up to a strange icon on my phone when i turned it on. It said i needed to connect my iphone to itunes. I just got my iphone a few weeks ago, and i didn't have any problems up in till now. So I causually went up to my computer, and plugged my charger into the computer, and plugged my charger to the iphone. A message popped up saying my iphone needed to be restored. So I clicked 'restore and upgrade." It was restoring for 2 hours. When it was finally complete, a small white bar apperead. Unfortuantly, even though my phone was plugged in for several hours, it still made no progess. I updated Itunes..I even updated my computer! I tried another computer which has more updated feautures to it, and it still has the same problem. Any suggestions? Greatly appreciated.Perform a Reset...
Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no success
Connect to iTunes on the computer you usually Sync with and “ Restore “
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode
http://support.apple.com/kb/HT1808 -
Podcast Episodes are shown multiple times in itunes
http://t.co/SE40IZgdBh
iTunes shows podcast episodes on my iPhone multiple times. In the App on the phone it is shown correctly.
Can you help me?It seems that many people have this problem if you Google it. My wife has the snag on her iPod Touch 4, whereas mine is fine (well, it was, last time I checked.) Regrettably, though the problem seems common, what I cannot find is any acknowledgement by Apple, let alone any advice, or, God forbid, a fix!
-
I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.
I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.
-
I keep plugging in my iPhone to my computer, but iTunes says it does not recognize my phone and won't sync because it needs the latest version of iTunes (11.1 I believe?) to work. I have already downloaded the latest version of iTunes, and I have retried multiple times just incase and it says I already have the latest version downloaded. What can I do to make iTunes recognize my phone again?
Hey there RMBrizzolara,
It sounds like you have downloaded iTunes from the download site, but when you connect the phone to your computer you are prompted to update iTunes to 11.1. I would start by opening iTunes and then verifying the version that is running with this article:
iTunes: How to find which version you are using
http://support.apple.com/kb/HT1208
On Windows
Open iTunes.
On the Help menu, click About iTunes. A window appears with scrolling text. The first text that appears displays the iTunes version (press the Space bar to freeze the text if it's moving too fast for you to read).
Also when you download the iTunes installer, you MUST double click the file that was downloaded to install it.
You can check in your Programs folder and try running the iTunes application from there to see if that works.
Cheers,
Sterling -
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
My child has put in the wrong password on my phone multiple times, my iPhone now say "iPhone has been disabled connect to iTunes" When I hook my phone up to iTunes, iTunes then says that my iPhone can not be hooked up to iTunes because it has a password on it, but will not allow me to put in a password because the disabled message is still showing. What is the next step?
You may need to put the iPhone into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the phone and restore/resync your content to it.
-
my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???
Hi lepyykko,
If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right? The first step is to get iTunes successfully installed on your computer. Then backup the iPhone before updating the iOS software.
Are you seeing any error messages when you try to install iTunes for Windows?
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
Are you able to update your iPhone wirelessly?
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204204
Before you update
Back up your device to iCloud.
Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201263
I hope this information helps ....
- Judy -
IPhone keeps sending the same text message multiple times in a row.
My iphone (4s) keeps sending people the same text message multiple times (2-4) a few seconds inbetween. Sometimes it will tell me that there the message failed, but they still recieve it multiple times. I've already tried deleting the message tread and reset network settings. Nobody who has an iphone has said anything to me about it yet, only people with android.
It's a carrier issue. I have AT&T and had this issue with my friend (who had an Android) and my mother (who had a feature phone). Both of them have Verizon for service and I'm thinking the issue was on Verizon's end. They both just dealt with it as we tried all sorts of things to get this sorted out (other than contacting Verizon directly) and had no luck.
They've both switched to iPhones so it's a moot point for us now, at least.
~Lyssa -
My iPhone is not showing that it is connected to wi-fi. My laptop is showing the wi-fi signal with a completely strong signal. I have turned the phone off & on multiple times, and have turned the wi-fi (on the phone) off & on multiple times as well, all with the same result. Help!!! Any suggestions?
Poof! It's working like normal! Thanks Lawrence! Guess I have to learn patience!
Maybe you are looking for
-
Error Message regarding define pricing procedure determination
Hi Guru: I encountered the issue when defining pricing procedure determination,when I tried to input the sales organization,distribution channel and pricing procedure and condition type into the column,the error message popped up and said "An entry a
-
Details on sd qm waste management.
what are the FN features of sd mm qm and Waste management
-
Hi Everyone, I am doing some test for database mirroring. I come with come with these two scenarios i unable to test out. 1) The principal database server disks full. In these case is the database mirroring failover will happen? 2) The principal data
-
Hi, I have a two year old 12" powerbook 1.33 Ghz whose hard drive recently suffered a stroke or something. After a couple months of acting up, I received a warning from SMARTreporter (handy little program) that the disk was on the verge of failing. I
-
Formulated Grand total as percentage value
Hi, Here is my sample data Val1 Val2 Percentage( Val2/Val1 ) 59 16 27% 19 4 21% 78 20 26% (now instead of getting 26% i'm getting 48%). How to get formulated grand total value based on previous two columns ? Thanks