Exchanging one router for another

i currently have a working WRT54G2 router and will be swapping it for a e1200 router. Should I disconnect the current router from the modem first before inserting the setup CD for the new router? Thanks for any help on this issue.

Well, yes if you are using the new E1200 router you have to remove the old Router WRT54G from the network. For the initial setup, all it requires is a proper physical connectivity between your modem, router and computer. To setup a new router, it’s always recommended to set the router to factory defaults before you run the CD. Finally run the Cisco connect software that’s bundled with the CD, which handles both your internet setup and wireless setup. For the setup process, you need to perform the following:
i. Verify that there is an active Internet connection between the computer and modem
ii. Setting up the router using Cisco Connect
For more information about installing the E1200 router via Cisco Connect. Please refer to the link below.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=e30f926604334d538668529cb50ad174_21463.xml&pid=80&...

Similar Messages

How to exchange one image for another with a click

I am brand new to actionscript, so bear with me! I need to create an interactive web-based system which takes the user through steps to assemble something. One of the pages will have images of the tools needed. I want the user to be able to 'tick' off each tool, so that when they click on the image of a specific tool it is replaced by the image faded out and a big red tick over it. essentially it is replacing one image for another when it is clicked on.
any ideas on the actionscript? Sorry i know this must be basic stuff for you!
thanks!

your tool images should be converted to movieclips and given instance names and you should create a red tick movieclip that you assign a class, say RedTick. you can then use:
tool1.addEventListener(MouseEvent.CLICK,toolClickF);
function toolClickF(e:MouseEvent):void{
var redtick:RedTick=new RedTick();
addChild(redtick);
redtick.x=e.currentTarget.x;
redtick.y=e.currentTarget.y;
e.currentTarget.alpha=.4;

How do I swap one clip for another in Final Cut Pro 7?

How do I sway one clip for another in Final Cut Pro 7? I am doing what it says in a book but it is not working. Thanks.

You drag the clip from the browser to the clip on the timeline. Wait till the timeline clip goes white. Drop it and pick from the menu that appears the replace option you want.

Change one colour for another.

Quite simply I'd like to swap one colour for another: maybe to turn all black into red and leave the rest as it is...or select greens only and make them blue. I've found various ways to adjust and alter colours but usually the entire picture is altered not just one element of it (eg., Enhance > color > Hue/saturation) . I'm using Pshop LE but I think this would be a universal feature...can't seem to find it though! Hope you can suggest something...

Most forums wouldn't accept a reply four years later, but the information sure helped me four years later. Henrik said:
What about Enhance > Adjust Color > Replace Color, is that tool available in PS LE?
It's available Photoshop Elements 6.0 and it totally did the job for me. Someone had scanned some text for me and a lot of the background was grey. In only two operations, I changed one colour grey background to white (actually maximum lightness) and the remaining colour grey to white. I didn't know there really was such a feature, just that I wanted there to be that feature, and I don't know that I'd ever have guessed where to find it. It took me about 3 minutes total to find the forums and find this answer and do what I wanted. Am I ever happy. Thanks for the information.

Gradual swap one bitmap for another?

I am trying to swap one bitmap for another over a few
seconds. I can't get it to work. Is this a motion tween or shape
tween or what?

newbie1420,
> Sorry about the delay, I would like to "morph" one photo
into
> another, one fades into the next.
It sounds like you're using two words to describe the same
technique --
but I'm not sure. To me, a morph is when one raster image
slowly
metamorphoses into another. If photo A is a dog, and photo B
is a cat, the
area that represents the dog's nose literally changes shape
to become the
shape of a cat's nose The dog's ears may grow, warp, or
otherwise distort
to become the shape of the cat's ears, and so on. Fading
generally
describes a dissolve: nothing in either image changes shape;
it's just that
one image slowly becomes more transparent, revealing the
image beneath it.
> I have made them into movie clip symbols, still not
getting the right
> effect...
If you're after morphing, as described above, you'll find
that Flash
doesn't support it. If you're after a dissolve, you can
achieve the effect
easily by putting two photos into their own symbols, as
you've done, and
each symbol in its own layer, one atop the other. Put two
keyframes in the
upper symbol. At the first keyframe, make sure the symbol's
Alpha property
is 100. At the second keyframe, make sure the symbol's Alpha
property is 0.
Motion tween the span of frames between those two keyframes,
and you'll have
your dissolve, aka fade.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

For a book cover in Elements 9 I can't exchange the jpg for another. Can someone walk me thru it?

At the upper rt. and wrapping around the book cover is a jpg. I want to exchange it for another, but can't. I've tried deleting the photo and then importing another. That won't work. Tried opening another layer, but that doesn't work either. Do I open a layer and then import? Whatever I do the jpg pastes onto the entire BACKground of the cover/canvas! Can someone walk me thru this?! Is the problem that I need to be in a certain format from the left column of icons?!
Thank you!
[email protected]
Kristen

Kristen
From the nature of your question, it appears that you have posted in the wrong forum. This looks like a Photoshop Elements 9 (photo editing) question that you have posted in the Premiere Elements Forum (video editing).
If this is as I suspect, please repost your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move your thread from here to there. It might be quicker for you to repost your question in the Adobe Photoshop Elements Forum.
Photoshop Elements
ATR

How can I load the mix of one song for another song?

I'm going to be mixing a live gospel album with 9 tracks of drums, bass, guitar, piano, strings, organ, lead vocals and 6 tracks of choir vocals. Each song will basically be mixed the same except for variations in the choir levels and lead vocals. I want to mix this in logic but I don't want to create a mix for each song from scratch. All the audio tracks will be consistiently on the same track, meaning Bass-trak 1, guitar-trak 10 etc... for each song. What would be the easiest way to do this without creating a mix from scratch for each song.
Thanks

Hi. I find myself in this situation a lot, and eventually settled on this method.
Mix the first track the way you want it, and getting your levels and plugins settled. Save the song as the title of that particular song. Then, select everything in the arrange window, and delete it. If you are asked to delete or keep audio files, click keep, cos you don't want to lose recorded audio. If you have set markers, delete those too. if you have any automation, select track automation>delete all automation of all tracks.
You are then set with a clean sheet with your tracks labelled, levels set and all the bells and whistles. Now do a SAVE AS and call it something like KICKASSGOSPELTEMPLATE or even save it as a logic template. Then, with this template open, open up another one of your songs, select everything in your arrange window, copy it to your clipboard, move to your template song, go bar number 1, and paste. You will be asked whether you want to copy instruments or tracks. I can't remember which one you select, but a quick trial and error should see you straight. All the audio tracks should come down onto the right audio objects and hitting play should have you almost to where you want to be.

How to copy a configuration from one router to another?

Hi I have a 2600 that I need to use for a new gateway router. I need to copy the configuration from the old router to this one. I need to know how to do that the fastest way. If someone can help it would be appreciated. Thanks.

well i have this in mind which may help you.
You would need to have a public ip address to the machine you have consoled to and on internet.
Download the tftp software from below link.
http://tftpd32.jounin.net/
This software does not only act as the tftp server but also you can select the interface of you ethernet card as tftp server ip address.
For ex if you are connected to a console and have a wireless card which is connected to internet also you connect you eth lan card to the eth or fast eth of the router.
you can select which ever interface you want to act as the tftp server.
you will need to add ip addres for you lan card and also config the router port as same if needed.

Connecting to infinity - One router for all?

Partly technical and partly efficiency - Okay, so I got BT Infinity on 9th July although I am struggling with the non-responsive Openreach modem (it's white, and it keeps blinking green then going blank and forth all the time).
With two modems (HomeHub 3 + Openreach) needed to connect to Infinity I was wondering if there is a router that merged all of the functions of the two modems into one? Or do I need to keep the appointment for 17/7/12 (arranged by telephone) so that the Openreach modem can be replaced?
By the way, I already understand that the engineers are busy due to 2012 Olympics, but the router problem is getting annoying.

DSL was blinking then went blank in the day times. I'll summarise the situation since day one:
9/7 - Good Service
10/7 - No service until night - DSL light blinked then went blank all day
11/7 - No service until night - ditto
12/7 - No service until night - ditto
13/7 - No service since 7:30am - ditto
14/7 - Good service
15/7 - ?
Power light was okay, LANs were okay. But once restarted it takes awfully a long time to respond. It must be the firmware of the white router, which in that case it needs replacing IMO

HT4859 I am unable to recover a rented movie after changing one iPad for another. Music and books were easily restored

I am unable to restore a rented movie after Changing out my iPad for a new one. All music and books were restored easily

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Using the Template of one site for another site.

Hi,
I have created and published Site A using a template (DW CS4). I now wish to create Site B and use the same template from the Site A.
The only thing which will change is the banner which I create in Photoshop for each site.
I also wish to use the navigation buttons which were part of Site A's template. Can this be done?
One note: all the files from Site A have been copied into Site B.
Any help is greatly appreciated.
Frank

One note: all the files from Site A have been copied into Site B.
Including the template? If so, then blast ahead. Things should work fine.

How to call repaint() from one panel for another panel

I have two classes (leftPanel and rightPanel), which extends JPanel. I have added these panels to the container of the JFrame. I have a JButton in my left leftPanel. When I click the button I want that the repaint method of rightPanel is called. Please tell me how to do that.

Ok, the reason it wasn't working is because the two classes don't have a reference to each other. They don't have anything in common at all. The only class hooking them together is the myFrame. Therefore, myFrame is the class that should be the communication link. I've added a few lines of code to myFrame, but didn't change the other classes. Now myFrame has an actionListener and it listens for the leftPanel.leftButton. When the leftButton fires, myFrame tells rightPanel to repaint. Another cool way would be to have an actionListener on rightPanel and register that with leftPanel when you instantiate them in myFrame.
GL
kimoS
import javax.swing.*;
import java.awt.*;
import java.awt.geom.*;
import java.awt.event.*;
import java.util.*;
public class myFrame extends JFrame implements ActionListener{
leftPanel left;
rightPanel right;
static int st=0;
myFrame(){
left=new leftPanel();
left.leftButton.addActionListener(this);
right=new rightPanel();
this.getContentPane().add(left,BorderLayout.WEST);
this.getContentPane().add(right,BorderLayout.CENTER);
public static void main(String args[]){
myFrame mf=new myFrame();
mf.setSize(500,500);
mf.setVisible(true);
public void actionPerformed(ActionEvent e){
right.repaint();
class leftPanel extends JPanel {
JButton leftButton;
leftPanel(){
leftButton=new JButton("leftButton");
this.add(leftButton);
leftButton.addActionListener(new leftButtonListener());
class leftButtonListener implements ActionListener{
public void actionPerformed(ActionEvent e){
myFrame.st=myFrame.st+1;
System.out.println("st value inside listener="+myFrame.st);
// ??? here I want to call repaint method of rightPanel
class rightPanel extends JPanel{
int flag=-1;
public void paintComponent(Graphics g) {
update(g);
public void update(Graphics g){
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.drawString("If " myFrame.st" increases then repaint() called on click of button",30,100);
flag=flag*(-1);
if(flag==1){
g2.drawString(" painting is working",100,200);
}

Home Sharing drops when I move from one router to another on an extended network??? HELP.

I have an airport extreme as my main router. I bought an airport express to get a stronger signal across the house. The express is set to bridge mode. When I start playing a movie using home sharing near one wireless router and move to a location near the other router, the home sharing drops. I have to return to my computer and close itunes and reopen to get it to work again. Very frustrating. I have to reset iTunes constantly. Please help.
Thanks,
JOE

Ahhhhh. I was running in circles not being familiar with MacOSX. However, I seem to have accomplished what I wanted. I hadn't noticed that I could delete the other account by clicking the lock icon. Once I deleted it the migrated account became the default autologin account and all is well now. Cool. Pretty simple.

Post items from one account for another new account

Hi people,
We would like to know if there is some procedure do post all of the documents we have in a specific account to a new one. (document by document).
Thanks,
Rosana.

Hi,
Based on Area we have diffrent process.
Ex:
GL Posting " Document Type SA, Post Key 40 & 50 Etc.
Vendor " Document Type KA,KR,KZ Post Key 25, 29 & 31 Etc.
Customer " Doc Type DA,DR,DZ Post key * 01,09,15,19* Etc
Asset: Document Type "AA, Post key 70 &75 Etc
Like same based on process we have diffrent T.Codes.
Regards
Viswa

Can I substitute one class for another at run time

In one compilation unit, there are 2 classes. One is public.(class Test is public and class Process is without any modifier. Test is inherited from Process). There is a private method in Process. When i try to compile while accessing the private method of Process in Test, I get a compiler error, rightfully so. But I successfully got a Process.class.
So, now i remove the private access modifier from my method in Process class and compile the whole thing and am able to run (java Test). But, if i replace the latest Process.class with the original Process class with the private method, I am still able to run(java Test)!!
This all happed in Windows NT but not in Solaris.
Is this correct ? Is this not a security violation?

It's a bug: http://developer.java.sun.com/developer/bugParade/bugs/4293149.html

Exchanging one router for another

Similar Messages

Maybe you are looking for